Use of phylogeny to resolve the taxonomy of the widespread and highly polymorphic African giant shrews (Crocidura olivieri group, Crocidurinae, Mammalia).

The aim of this study is to provide a better understanding of the genetic relationships within the widespread and highly polymorphic group of African giant shrews (Crocidura olivieri group). We sequenced 769 base pairs (bp) of the mitochondrial cytochrome b gene and 472 bp of the mitochondrial control region over the entire geographic range from South Africa to Morocco. The analyses reveal four main clades associated with different biomes. The largest clade occurs over a range covering Northwest and Central Africa and includes samples of C. fulvastra, C. olivieri, and C. viaria. The second clade is composed of C. goliath from Gabon, while South African C. flavescens, and C. hirta form two additional clades. On the basis of these results, the validity of some taxa in the C. olivieri group should be re-evaluated.

A contribution to the pathobiology of Biomphalaria glabrata hemocytes

This study attempts to investigate the relationship between the hemocytes in the two compartments: circulating peripheral lymph and the connective tissues. The hemocytes are compared with the vertebrate macrophages and constitute the principal line of defense against external aggression. The hemocytes were counted in circulating hemolymph and their phagocytic capability was evaluated in Schistosoma mansoni-infected Biomphalaria glabrata and the results were compared with those obtained from normal intact control snails. Although the number of circulating hemocytes revealed a mild increase in snails at the 6th week of infection, the overall findings were similar and pointed out that the cells in the two compartments are not functionally connected. However, the hemocytes found within the connective tissues of infected snails showed definite ultrastructural differences in the number and disposition of cytoplasmic prolongations and organelles in comparison with the hemocytes from non-infected snails. Histochemically, the staining for acid phosphatase activity served as a marker to hemocytes, sometimes being found in extracellular material at the foci of parasite-hemocyte interactions.

Ecologie industrielle de l'aluminium, flux de matières et d'énergie : réalités et enjeux du recyclage

Dans les dernières années du 20ème siècle, l'aluminium a fait l'objet de beaucoup de communications outrancières et divergentes cautionnées par des scientifiques et des organismes faisant autorité. En 1986, la société PECHINEY le décrète perpétuel tel le mouvement « L'aluminium est éternel. Il est recyclable indéfiniment sans que ses propriétés soient altérées », ce qui nous avait alors irrité. Peu de temps après, en 1990, une communication tout aussi outrancière et irritante d'une grande organisation environnementale, le World Wild Fund, décrète que « le recyclage de l'aluminium est la pire menace pour l'environnement. Il doit être abandonné ». C'est ensuite à partir de la fin des années 1990, l'explosion des publications relatives au développement durable, le bien mal nommé. Au développement, synonyme de croissance obligatoire, nous préférons société ou organisation humaine et à durable, mauvaise traduction de l'anglais « sustainable », nous préférons supportable : idéalement, nous aurions souhaité parler de société durable, mais, pour être compris de tous, nous nous sommes limités à parler dorénavant de développement supportable. Pour l'essentiel, ces publications reconnaissent les très graves défauts de la métallurgie extractive de l'aluminium à partir du minerai et aussi les mérites extraordinaires du recyclage de l'aluminium puisqu'il représente moins de 10% de la consommation d'énergie de la métallurgie extractive à partir du minerai (on verra que c'est aussi moins de 10% de la pollution et du capital). C'est précisément sur le recyclage que se fondent les campagnes de promotion de l'emballage boisson, en Suisse en particulier. Cependant, les données concernant le recyclage de l'aluminium publiées par l'industrie de l'aluminium reflètent seulement en partie ces mérites. Dans les années 1970, les taux de croissance de la production recyclée sont devenus plus élevés que ceux de la production électrolytique. Par contre, les taux de recyclage, établis à indicateur identique, sont unanimement tous médiocres comparativement à d'autres matériaux tels le cuivre et le fer. Composante de l'industrie de l'aluminium, le recyclage bénéficie d'une image favorable auprès du grand public, démontrant le succès des campagnes de communication. A l'inverse, à l'intérieur de l'industrie de l'aluminium, c'est une image dévalorisée. Les opinions émises par tous les acteurs, commerçants, techniciens, dirigeants, encore recueillies pendant ce travail, sont les suivantes : métier de chiffonnier, métier misérable, métier peu technique mais très difficile (un recycleur 15 d'aluminium n'a-t-il pas dit que son métier était un métier d'homme alors que celui du recycleur de cuivre était un jeu d'enfant). A notre avis ces opinions appartiennent à un passé révolu qu'elles retraduisent cependant fidèlement car le recyclage est aujourd'hui reconnu comme une contribution majeure au développement supportable de l'aluminium. C'est bien pour cette raison que, en 2000, l'industrie de l'aluminium mondiale a décidé d'abandonner le qualificatif « secondaire » jusque là utilisé pour désigner le métal recyclé. C'est en raison de toutes ces données discordantes et parfois contradictoires qu'a débuté ce travail encouragé par de nombreuses personnalités. Notre engagement a été incontestablement facilité par notre connaissance des savoirs indispensables (métallurgie, économie, statistiques) et surtout notre expérience acquise au cours d'une vie professionnelle menée à l'échelle mondiale dans (recherche et développement, production), pour (recherche, développement, marketing, stratégie) et autour (marketing, stratégie de produits connexes, les ferro-alliages, et concurrents, le fer) de l'industrie de l'aluminium. Notre objectif est de faire la vérité sur le recyclage de l'aluminium, un matériau qui a très largement contribué à faire le 20ème siècle, grâce à une revue critique embrassant tous les aspects de cette activité méconnue ; ainsi il n'y a pas d'histoire du recyclage de l'aluminium alors qu'il est plus que centenaire. Plus qu'une simple compilation, cette revue critique a été conduite comme une enquête scientifique, technique, économique, historique, socio-écologique faisant ressortir les faits principaux ayant marqué l'évolution du recyclage de l'aluminium. Elle conclut sur l'état réel du recyclage, qui se révèle globalement satisfaisant avec ses forces et ses faiblesses, et au-delà du recyclage sur l'adéquation de l'aluminium au développement supportable, adéquation largement insuffisante. C'est pourquoi, elle suggère les thèmes d'études intéressant tous ceux scientifiques, techniciens, historiens, économistes, juristes concernés par une industrie très représentative de notre monde en devenir, un monde où la place de l'aluminium dépendra de son aptitude à satisfaire les critères du développement supportable. ABSTRACT Owing to recycling, the aluminium industry's global energetic and environmental prints are much lower than its ore extractive metallurgy's ones. Likewise, recycling will allow the complete use of the expected avalanche of old scraps, consequently to the dramatic explosion of aluminium consumption since the 50's. The recycling state is characterized by: i) raw materials split in two groups :one, the new scrap, internal and prompt, proportional to semi-finished and finished products quantities, exhibits a fairly good and regular quality. The other, the old scrap, proportional to the finished products arrivïng at their end-of--life, about 22 years later on an average, exhibits a variable quality depending on the collect mode. ii) a poor recycling rate, near by that of steel. The aluminium industry generates too much new internal scrap and doesn't collect all the availa~e old scrap. About 50% of it is not recycled (when steel is recycling about 70% of the old scrap flow). iii) recycling techniques, all based on melting, are well handled in spite of aluminium atiiníty to oxygen and the practical impossibility to purify aluminium from any impurity. Sorting and first collect are critical issues before melting. iv) products and markets of recycled aluminium :New scraps have still been recycled in the production lines from where there are coming (closed loop). Old scraps, mainly those mixed, have been first recycled in different production lines (open loop) :steel deoxidation products followed during the 30's, with the development of the foundry alloys, by foundry pieces of which the main market is the automotive industry. During the 80's, the commercial development of the beverage can in North America has permitted the first old scrap recycling closed loop which is developing. v) an economy with low and erratic margins because the electrolytic aluminium quotation fixes scrap purchasing price and recycled aluminium selling price. vi) an industrial organisation historically based on the scrap group and the loop mode. New scrap is recycled either by the transformation industry itself or by the recycling industry, the remelter, old scrap by the refiner, the other component of the recycling industry. The big companies, the "majors" are often involved in the closed loop recycling and very seldom in the open loop one. To-day, aluminium industry's global energetic and environmental prints are too unbeara~ e and the sustainaЫe development criteria are not fully met. Critical issues for the aluminium industry are to better produce, to better consume and to better recycle in order to become a real sustainaЫe development industry. Specific issues to recycling are a very efficient recycling industry, a "sustainaЫe development" economy, a complete old scrap collect favouring the closed loop. Also, indirectly connected to the recycling, are a very efficient transformation industry generating much less new scrap and a finished products industry delivering only products fulfilling sustainaЫe development criteria.

Pregnancy outcome following maternal exposure to statins: a multicenter prospective study

Introduction Statin use in women of childbearing age is increasingly common. However, published data on pregnancy outcome after exposure to statins are scarce and conflicting. This contribution addresses the safety of statin use during pregnancy.Materials and Methods In a multi-centre (n = 11), prospective study we compared the outcomes of 249 women exposed during the 1st trimester of pregnancy to simvastatin (n = 124), atorvastatin (n = 67), pravastatin (n = 32), rosuvastatin (n = 18), fl uvastatin (n = 7) or cerivastatin (n = 1) with a control group exposed to agents known to be non-teratogenic (n = 249). Data were collected by members of the European Network of Teratology Information Services during individual risk counselling.Results The difference in the rate of major birth defects between the statinexposed and the control group was statistically insignificant (4.0% versus 2.7% OR 1.5; 95% CI 0.5-4.5, p = 0.44). The crude rate of spontaneous abortions (12.8% versus 7.1%, OR 1.9, 95% CI 1.0-3.6, p = 0.04) was higher in the exposed group. However, after adjustment to maternal age and gestational age at initial contact, the difference became insignificant. The rate of elective pregnancy-termination (8.8% versus 4.4%, p = 0.05) was higher and the rate of live births was lower in the exposed group (77.9% versus 88.4%, p = 0.002). Prematurity was more frequent in exposed pregnancies (16.1% versus 8.5%; OR 2.1, 95% CI 1.1- 3.8, p = 0.02). Nonetheless, gestational age at birth (median 39 weeks, IQR 37-40 versus 39 weeks, IQR 38-40, p = 0.27) and birth weight (median 3280 g, IQR 2835-3590 versus 3250 g, IQR 2880- 3600, p = 0.95) did not differ between exposed and non-exposed pregnancies.Conclusion This study did not detect a teratogenic effect of statins. Its statistical power however is not sufficient to reverse the recommendation of treatment discontinuation during pregnancy.

Large-scale gene-centric analysis identifies novel variants for coronary artery disease.

Coronary artery disease (CAD) has a significant genetic contribution that is incompletely characterized. To complement genome-wide association (GWA) studies, we conducted a large and systematic candidate gene study of CAD susceptibility, including analysis of many uncommon and functional variants. We examined 49,094 genetic variants in ∼2,100 genes of cardiovascular relevance, using a customised gene array in 15,596 CAD cases and 34,992 controls (11,202 cases and 30,733 controls of European descent; 4,394 cases and 4,259 controls of South Asian origin). We attempted to replicate putative novel associations in an additional 17,121 CAD cases and 40,473 controls. Potential mechanisms through which the novel variants could affect CAD risk were explored through association tests with vascular risk factors and gene expression. We confirmed associations of several previously known CAD susceptibility loci (eg, 9p21.3:p<10(-33); LPA:p<10(-19); 1p13.3:p<10(-17)) as well as three recently discovered loci (COL4A1/COL4A2, ZC3HC1, CYP17A1:p<5×10(-7)). However, we found essentially null results for most previously suggested CAD candidate genes. In our replication study of 24 promising common variants, we identified novel associations of variants in or near LIPA, IL5, TRIB1, and ABCG5/ABCG8, with per-allele odds ratios for CAD risk with each of the novel variants ranging from 1.06-1.09. Associations with variants at LIPA, TRIB1, and ABCG5/ABCG8 were supported by gene expression data or effects on lipid levels. Apart from the previously reported variants in LPA, none of the other ∼4,500 low frequency and functional variants showed a strong effect. Associations in South Asians did not differ appreciably from those in Europeans, except for 9p21.3 (per-allele odds ratio: 1.14 versus 1.27 respectively; P for heterogeneity = 0.003). This large-scale gene-centric analysis has identified several novel genes for CAD that relate to diverse biochemical and cellular functions and clarified the literature with regard to many previously suggested genes.

Contribution à la connaissance des diptères nécrophages du Jorat (Vaud, Suisse)

A contribution to the knowledge of necrophagous flies of the Jorat (Vaud, Switzerlan). A survey of necrophagous flires has been realized from spring to fall (april-october) in a meadow and a forest using selective traps. Seventeen species of carrion flies were collected belonging to the Callophoridae (10 species), Sarcophagidae (3 species) and Muscidae (4 species). Among these species, 14 were found in the meadow, 11 in the forest with 8 common to both habitats. seasonal distribution of the dominant species for each habitat is presented.

Molecular characterization of the NSP4 gene of human group A rotavirus samples from the West Central region of Brazil

Nonstructural protein 4 (NSP4), encoded by group A rotavirus genome segment 10, is a multifunctional protein and the first recognized virus-encoded enterotoxin. The NSP4 gene has been sequenced, and five distinct genetic groups have been described: genotypes A-E. NSP4 genotypes A, B, and C have been detected in humans. In this study, the NSP4-encoding gene of human rotavirus strains of different G and P genotypes collected from children between 1987 and 2003 in three cities of West Central region of Brazil was characterized. NSP4 gene of 153 rotavirus-positive fecal samples was amplified by reverse transcriptase-polymerase chain reaction and then sequenced. For phylogenetic analysis, NSP4 nucleotide sequences of these samples were compared to nucleotide sequences of reference strains available in GenBank. Two distinct NSP4 genotypes could be identified: 141 (92.2%) sequences clustered with NSP4 genotype B, and 12 sequences (7.8%) clustered with NSP4 genotype A. These results reinforce that further investigations are needed to assess the validity of NSP4 as a suitable target for epidemiologic surveillance of rotavirus infections and vaccine development.

Temporal variability of antibiotics fluxes in wastewater and contribution from hospitals.

Significant quantities of antibiotics are used in all parts of the globe to treat diseases with bacterial origins. After ingestion, antibiotics are excreted by the patient and transmitted in due course to the aquatic environment. This study examined temporal fluctuations (monthly time scale) in antibiotic sources (ambulatory sales and data from a hospital dispensary) for Lausanne, Switzerland. Source variability (i.e., antibiotic consumption, monthly data for 2006-2010) were examined in detail for nine antibiotics--azithromycin, ciprofloxacin, clarithromycin, clindamycin, metronidazole, norfloxacin, ofloxacin, sulfamethoxazole and trimethoprim, from which two main conclusions were reached. First, some substances--azithromycin, clarithromycin, ciprofloxacin--displayed high seasonality in their consumption, with the winter peak being up to three times higher than the summer minimum. This seasonality in consumption resulted in seasonality in Predicted Environmental Concentrations (PECs). In addition, the seasonality in PECs was also influenced by that in the base wastewater flow. Second, the contribution of hospitals to the total load of antibiotics reaching the Lausanne Wastewater Treatment Plant (WTP) fluctuated markedly on a monthly time scale, but with no seasonal pattern detected. That is, there was no connection between fluctuations in ambulatory and hospital consumption for the substances investigated.

Group A rotavirus genotypes and the ongoing Brazilian experience: a review

Brazil was the first Latin American country to introduce universal group A rotavirus (RV-A) vaccination in March 2006, resulting in a unique epidemiological scenario. Since RV-A first identification in Brazil, 2,691 RV-A-positive stool samples, collected between 1982- 2007, were typed by independent research groups throughout the country. In the pre-vaccination era, 2,492 RV-A-positive samples collected from 1982-2005 were successfully typed, while 199 samples were analyzed from 2006-2007. According to the reviewed studies, there were two important times in the pre-vaccination era: (i) the period from 1982-1995, during which the detection of G5P[8] RV-A, in addition to the classical genotypes G1-4, challenged vaccine development programs; and (ii) the period from 1996-2005, during which genotype G9P[8] emerged, following a global trend. The rate of G2P[4] RV-A detection decreased from 26% (173/653) during 1982-1995 to 2% (43/1,839) during 1996-2005. The overall detection rate of RV-A genotypes from 1982-2005 was as follows: 43% (n = 1,079) G1P[8]/G1P[not typed (NT)]; 20% (n = 488) G9P[8]/G9P[NT]; 9% (n = 216) G2P[4]/G2P[NT]; 6% (n = 151) G3P[8]/G3P[NT]; 4% (n = 103) G4P[8]/G4P[NT]; and 4% (n = 94) G5P[8]/G5P[NT]. Mixed infections accounted for 189 (7%) of the positive samples, while atypical G/P combinations or other genotypes, including G6, G8, G10 and G12, were identified in 172 (7%) samples. The initial surveillance studies carried out in several Brazilian states with RV-A-positive samples collected in 2006 and 2007 show a predominance of G2P[4] strains (148/199 or 74%). Herein, we review RV-A typing studies carried out since the 1980s in Brazil, highlighting the dynamics of RV-A strain circulation profiles before and early after universal use of RV-A vaccine in Brazil.