Comparison of adhesion layers of gold on silicate glasses for SERS detection

Gold is one of the most widely used metals for building up plasmonic devices. Although slightly less efficient than silver for producing sharp resonance, its chemical properties make it one of the best choices for designing sensors. Sticking gold on a silicate glass substrate requires an adhesion layer, whose effect has to be taken into account. Traditionally, metals (Cr or Ti) or dielectric materials (TiO2 or Cr2O3 ) are deposited between the glass and the nanoparticle. Recently, indium tin oxide and (3-mercaptopropyl)trimethoxysilane (MPTMS) were used as a new adhesion layer. The aim of this work is to compare these six adhesion layers for surface- enhanced Raman scattering sensors by numerical modeling. The near-field and the far-field optical responses of gold nanocylinders on the different adhesion layers are then calculated. It is shown that MPTMS leads to the highest field enhancement, slightly larger than other dielectric materials. We attributed this effect to the lower refractive index of MPTMS compared with the others.

Investigation of capacitive discharge heating of metallic glasses

In recent years, the discovery of bulk metallic glasses with exceptional properties has generated much interest. One of their most intriguing features is their capacity for viscous flow above the glass transition temperature. This characteristic allows metallic glasses to be formed like plastics at modest temperatures. However, crystallization of supercooled metallic liquids in the best bulk metallic glass-formers is much more rapid than in most polymers and silicate glass-forming liquids. The short times to crystallization impairs experimentation on and processing of supercooled glass-forming metallic liquids. A technique to rapidly and uniformly heat metallic glasses at rates of 10⁵ to 10⁶ kelvin per second is presented. A capacitive discharge is used to ohmically heat metallic glasses to temperatures in the super cooled liquid region in millisecond time-scales. By heating samples rapidly, the most time-consuming step in experiments on supercooled metallic liquids is reduced orders of magnitude in length. This allows for experimentation on and processing of metallic liquids in temperature ranges that were previously inaccessible because of crystallization.

A variety of forming techniques, including injection molding and forging, were coupled with capacitive discharge heating to produce near net-shaped metallic glass parts. In addition, a new forming technique, which combines a magnetic field with the heating current to produce a forming force, was developed. Viscosities were measured in previously inaccessible temperature ranges using parallel plate rheometry combined with capacitive discharge heating. Lastly, a rapid pulse calorimeter was developed with this technique to investigate the thermophysical behavior of metallic glasses at these rapid heating rates.

Atomic-level structure and deformation in metallic glasses

Metallic glasses (MGs) are a relatively new class of materials discovered in 1960 and lauded for its high strengths and superior elastic properties. Three major obstacles prevent their widespread use as engineering materials for nanotechnology and industry: 1) their lack of plasticity mechanisms for deformation beyond the elastic limit, 2) their disordered atomic structure, which prevents effective study of their structure-to-property relationships, and 3) their poor glass forming ability, which limits bulk metallic glasses to sizes on the order of centimeters. We focused on understanding the first two major challenges by observing the mechanical properties of nanoscale metallic glasses in order to gain insight into its atomic-level structure and deformation mechanisms. We found that anomalous stable plastic flow emerges in room-temperature MGs at the nanoscale in wires as little as ~100 nanometers wide regardless of fabrication route (ion-irradiated or not). To circumvent experimental challenges in characterizing the atomic-level structure, extensive molecular dynamics simulations were conducted using approximated (embedded atom method) potentials to probe the underlying processes that give rise to plasticity in nanowires. Simulated results showed that mechanisms of relaxation via the sample free surfaces contribute to tensile ductility in these nanowires. Continuing with characterizing nanoscale properties, we studied the fracture properties of nano-notched MGnanowires and the compressive response of MG nanolattices at cryogenic (~130 K) temperatures. We learned from these experiments that nanowires are sensitive to flaws when the (amorphous) microstructure does not contribute stress concentrations, and that nano-architected structures with MG nanoribbons are brittle at low temperatures except when elastic shell buckling mechanisms dominate at low ribbon thicknesses (~20 nm), which instead gives rise to fully recoverable nanostructures regardless of temperature. Finally, motivated by understanding structure-to-property relationships in MGs, we studied the disordered atomic structure using a combination of in-situ X-ray tomography and X-ray diffraction in a diamond anvil cell and molecular dynamics simulations. Synchrotron X-ray experiments showed the progression of the atomic-level structure (in momentum space) and macroscale volume under increasing hydrostatic pressures. Corresponding simulations provided information on the real space structure, and we found that the samples displayed fractal scaling (r^d ∝ V, d < 3) at short length scales (< ~8 Å), and exhibited a crossover to a homogeneous scaling (d = 3) at long length scales. We examined this underlying fractal structure of MGs with parallels to percolation clusters and discuss the implications of this structural analogy to MG properties and the glass transition phenomenon.

Sistema di navigazione aumentata per Smart Glasses

Questa tesi si pone come obiettivo di arricchire l’applicazione per dispositivi Android creata da OpenTripPlanner, aggiungendo funzionalità di navigazione aumentata, rendendola utilizzabile da Smart Glasses. L’utente sarà guidato a passo a passo nel percorso grazie a informazioni visive e uditive sulle direzioni da prendere. L’applicazione può essere personalizzata per l’utente che la sta utilizzando grazie alla possibilità di inserire le proprie generalità e informazioni, utili per calcolare le calorie bruciate dall’utente durante il tragitto. All’applicazione l’utente può anche connettere, tramite Bluetooth, un mi band. In questo modo, una volta raggiunta la destinazione prescelta l’utente può avere informazioni sul numero di passi effettuati durante il tragitto e le calorie bruciate.

Using alcohol unit-marked glasses enhances capacity to monitor intake:evidence from a mixed-method intervention trial

AIMS: In the UK, people tend to have poor knowledge of government guidelines for alcohol use, and lack the motivation and skills required to use them to monitor their drinking. The study aim was to determine whether using glasses marked with such guidelines would improve knowledge and attitudes, increase frequency of counting units and lower alcohol intake. METHODS: A total of 450 adults in the UK participated in an intervention vs control study with 1-month follow-up. The intervention group was encouraged to use glasses supplied by the researchers that indicated the unit content of drinks of different strengths and volumes, and stated the intake guidelines. Data were collected online. A further more in-depth interview with 13 intervention group participants enquired into their experiences of using the glasses. RESULTS: Analyses adjusted for baseline variables showed that the intervention improved the following: knowledge of unit-based guidelines, ability to estimate the unit content of drinks, attitudes toward the guidelines and frequency of counting unit intake. However, there was no significant difference in alcohol consumption between the groups at follow-up. Interviews suggested that the glasses encouraged people to think about their drinking and to discuss alcohol with other people. The design of the glasses was not appealing to all, and their initial impact did not always persist. CONCLUSION: Use of unit-marked glasses led to changes in people's reported use of unit-based guidelines to monitor their drinking but, in the short term, no change in consumption. Qualitative data suggested that the glasses could have an impact at the individual level (on knowledge and attitudes) and at a broader level (by prompting discussion of alcohol use).