Multiparticulate systems of pectin-chitosan: Study of swelling and drug release

The aim of this study was to prepare multiparticulate systems of pectin:chitosan (PC:CS) and to evaluate their swelling ratio and the drug release in different environments. PC:CS particles containing triamcinolone were prepared by a complex coacervation/ionotropic gelation method in aqueous environment. The polymer ratio, the calcium concentration and the contact time of the capsules with chitosan dispersion for particles formation and the structures obtained were analyzed. The systems were characterized in relation to morphology, size, swelling, and drug release behavior. The methodology used allowed the production of spherical particles with narrow range of size distribution. The entrapment efficiency for triamcinolone was 84.31 ± 439. It was observed that the particles present a relatively low swelling ratio in acidic medium and a larger swelling ratio in enteric medium. The release profile was dependent on pH and can be related with the swelling ratio.

Propriedades físicas e indicador de qualidade de um latossolo vermelho submetido a diferentes sistemas de uso e manejo

The conventional system for soil management and preparation has the intensive mechanization as its basic principle and that changes soil properties, especially physical ones, faster and significantly. This study aimed to obtain and compare physical properties such as distribution of particle sizes, density, distribution of pore sizes, curves of water retention and degradation index of a Red Latosol, under intensive cultivation and no-cultivation for six years. Soil samples were collected at depths of 0.1, 0.2, 0.3, 0.4, 0.6, 0.8 and 1.0 m. There was a clay increment as a result of cultivated soil increase. The no-till soil density decreased as depth increased; however, in the arable layer (0.3 m) of the cultivated soil, the opposite was verified. The largest volume of pores was verified in the cultivated soil, especially in the superficial layers. In the smallest applied tension (0.001 MPa), the cultivated soil retained more water; however, starting from 0.033 MPa, the highest humidity values occurred in the no-till soil. The highest degradation index was observed at a depth of 0.1 m in no-till soil. However, that value was superior (0.020) to what is physically considered very poor soil.

Obtenção e caracterização de lipossomas unilamelares pequenos contendo cafeína

Due to great difficulty of penetration of drugs through skin, different organized systems, such as liposomes, have been studied in order to increase percutaneous penetration. The aims of this work were to obtain and characterize small unilamellar liposomes containing caffeine (CAF). Liposomes composed by soy phosphatidylcholine - PS (40 mM) or hydrogenated PS - PSH (40 mM), with and without cholesterol - CHO (6 mM) and CAF (30 mg/mL), were characterized by size distribution, determination of mean diameter and encapsulation efficiency. Uniform size distribution with low polidispersity was observed. The mean of diameters obtained were: PS/CHO (64 nm), PS (80 nm), PSH/CHO (85 nm), PS/CAF (145 nm), PS/CHO/CAF (147 nm), PSH/CHO/CAF (152 nm), PSH (166 nm) and PSH/CAF (481 nm). The obtained encapsulation efficiency was 10.84% for PSH/CHO/CAF, followed by PS/CHO (6.61%), PSH/CAF (3.07%) and PS/CAF (1.57%).

Methanol oxidation on PtRu/C electrocatalysts prepared by a microemulsion method

PtRu/C nanocatalysts were prepared by a microemulsion method using different values of water/surfactant molar ratio in order to get different particle sizes. Crystallite sizes and structural properties were determined by X-ray diffraction. Particle size and distribution were characterized by transmission electron microscopy and average composition was determined by energy dispersive X-ray analysis. Differential scanning calorimetry measurements indicated the presence of oxides in the as-prepared catalysts. The general electrochemical behavior was evaluated by cyclic voltammetry in 0.5 M sulfuric acid and the electrocatalytic activity towards the oxidation of methanol was studied in 0.5 M methanol acid solutions by potential sweeps and chronoamperometry. copyright The Electrochemical Society.

Influência das propriedades de granulados de lactose nas características físicas dos comprimidos

The compaction behavior of powdered solids used in tablets can be dominated by the physical-chemical properties of the excipients because, frequently, they are present in much larger amounts than the drug in tablet formulation. The aim of this study was to evaluate the influence of the size of lactose granules on the physical characteristics of tablets produced in punches of various diameters, since this relation has not been explored in the literature. Granules were produced in several sizes by wet granulation and compressed in punches of different diameters by applying different forces. Size distribution, apparent density and flow of granules were evaluated, as well as the physical characteristics of the tablets (weight, friability, hardness and disintegration time). The results indicate that in situations where excipient characteristics predominate due to low drug content, as in the 7 mm punch, the selection of granule size is important for the mechanical strength of tablet. On the other hand, with the 9, 11 and 13mm punches, it was possible to produce strong tablet from all sizes of granules.

Estudo anatômico e distribuição das papilas valadas no gato doméstico

The tongue of domestic animals varies in size and shape and according to these animals feeding habits, there are different degrees of tongue surface specialization. At the dorsal surface of the tongue lingual papillae can be observed, such as the vallate papillae, related to taste perception. With the help of a magnifying glass, differences in the number, size and distribution of vallate papillae were studied. Fifty five tongues of adult domestic cats from both sexes (38 females and 17 males) were analyzed. The samples were fixed in 10% buffered formalin. The vallate papillae were found to be symmetrically distributed on 21 tongues (38.18%). However, it was observed that in some of the tongues the number of vallate papillae varied when one side of the tongue was compared to its contralateral side. The vallate papillae showed different shapes: elongated (42.58%), oval (31.61%), round (25.48%) and pear shaped (0.33%). The vallate papillae were classified into 10 different categories: symmetrical I (2 right and 2 left), II (3:3), III (4:4) and asymmetrical IV (3:2), V (4:2), VI (2:3), VII (4:3), VIII (5:3), IX (3:4) and X (4:5). Measurements of length and width were made with averages of 0.84 ± 0.23 mm and 0.55 ± 0.18 mm, respectively, besides the calculation of the total area of these papillae per tongue, that showed average of 2,74 ± 0,31 mm 2 in males and 1,94 ± 0,14 mm 2 in females However, upon examining the lingual papillae of the cat tongues, specimens demonstrating 7, 8 or 9 vallate papillae, arranged in pairs (4:3, 5:3, 3:4 and 4:5) by category, were observed in this study but not cited in the literature.

Influência das propriedades de granulados de celulose nas características físicas dos comprimidos

The compaction behavior of powdered solids can be strongly influenced by the physicochemical properties of excipients because they are frequently present in the tablet in larger amounts than the drug itself. The aim of this study was to assess the influence of the granule size of the cellulose on the physical characteristics of tablets produced in punches of different diameters, since this relation has never been explored in the literature. Granules of several sizes were produced by wet granulation and compressed in punches of various diameters by applying different forces. Size distribution, apparent density and flow of granules were assessed, as well as physical characteristics of the tablets (weight, hardness, friability and disintegration time). Reducing the granule size resulted in tablets of adequate crushing strength and fast disintegration; moreover, it allowed tablets to be produced without the need to use forces near the upper limit of the press, thus avoiding premature wear on the tabletting machine. Thus, once a suitable size for a given tablet formulation has been chosen, the granule size selected has been shown to determine the crushing strength of the tablet.

Estudos de pré-formulação de cápsulas gelatinosas duras contendo formulação de extrato de Gymnema sylvestre em pó

Gymnema sylvestre extract (GSE) is a plant product widely used as an adjuvant in the treatment of diabetes mellitus and commercially available as a powder. Owing to its low flowability, the manufacturing of hard gelatin capsules containing GSE faces specific problems. The purpose of this study was to investigate the best excipient (starch, lactose or microcrystalline cellulose) for hard gelatin capsules containing GSE. The technological properties such us bulk density (ρβ); tapped density (ρt); inter-particle porosity (Ie); Carr index (CI); Hausner ratio (HR); loss on drying (%LOD) and particle size distribution (%Pf) of the various GSE mixtures were investigated with the aim of identifying the best excipient. The need for lubricants (talc/magnesium stearate) was also assessed. GSE was characterized as a fine powder with more than 50% of its particles between 0.149mm to 0.250mm; furthermore, CI=25.6%; RH=1.3 and Ie = 25.6% and, as expected with such properties, it showed poor flowability. All the excipients investigated were able to change the technological properties of GSE and the powder mixture containing microcrystalline cellulose gave the best results.

Superfícies geomórficas e atributos do solo em uma toposseqüência de transição várzea-terra firme

Soil attributes reflect influence of the geomorphic surfaces. Therefore, the objective of this work was to investigate the influence of the geomorphic surfaces on soil attributes in a topossequence from low lands to high lands in the Humaitá region, AM. A transect of 4.5 km, from the top of the slope towards the low lands was established and the geomorphic surfaces were identified and limited according to topographic and estratigraphic criteria, based on detailed field investigation. Twenty soil samples were collected in each one of the slope segments within the geomorphic surfaces (G.S.), at the following depths: G.S. I: LAa (0.0-0.16 and 0.48-0.79 m); G.S. II: Lad1 (0.0-0.13 and 0.44-0.70) and Lad2 (0.0-0.10 and 0.30-0.55 m); G.S. III: RYve1 (0.0-0.18 and 0.51-0.89) and RYve2 (0.0-0.23 and 0.58-0.91 m). The sampling depths were determined by the surface and subsurface horizon depths, defined during the soil morphological description. Physical analysis involved particle size distribution, disperse clay, soil and particle density and total porosity. The chemical analysis involved determinations of pH in water and KCl, exchangeable cations, exchangeable Al, total acidity (H+Al), available P, organic carbon. The relief variations contributed to the presence of dystrophic soils in the geomorphic surface I and eutrophic soils in the geomorphic surface III. The multivariate statistical techniques were able to separate three heterogeneous groups, equivalent to the mapped geomorphic surfaces.

Improving methods in gap ecology: Revisiting size and shape distributions using a model selection approach

Questions: We assess gap size and shape distributions, two important descriptors of the forest disturbance regime, by asking: which statistical model best describes gap size distribution; can simple geometric forms adequately describe gap shape; does gap size or shape vary with forest type, gap age or the method used for gap delimitation; and how similar are the studied forests and other tropical and temperate forests? Location: Southeastern Atlantic Forest, Brazil. Methods: Analysing over 150 gaps in two distinct forest types (seasonal and rain forests), a model selection framework was used to select appropriate probability distributions and functions to describe gap size and gap shape. The first was described using univariate probability distributions, whereas the latter was assessed based on the gap area-perimeter relationship. Comparisons of gap size and shape between sites, as well as size and age classes were then made based on the likelihood of models having different assumptions for the values of their parameters. Results: The log-normal distribution was the best descriptor of gap size distribution, independently of the forest type or gap delimitation method. Because gaps became more irregular as they increased in size, all geometric forms (triangle, rectangle and ellipse) were poor descriptors of gap shape. Only when small and large gaps (> 100 or 400m2 depending on the delimitation method) were treated separately did the rectangle and isosceles triangle become accurate predictors of gap shape. Ellipsoidal shapes were poor descriptors. At both sites, gaps were at least 50% longer than they were wide, a finding with important implications for gap microclimate (e.g. light entrance regime) and, consequently, for gap regeneration. Conclusions: In addition to more appropriate descriptions of gap size and shape, the model selection framework used here efficiently provided a means by which to compare the patterns of two different types of forest. With this framework we were able to recommend the log-normal parameters μ and σ for future comparisons of gap size distribution, and to propose possible mechanisms related to random rates of gap expansion and closure. We also showed that gap shape varied highly and that no single geometric form was able to predict the shape of all gaps, the ellipse in particular should no longer be used as a standard gap shape. © 2012 International Association for Vegetation Science.

Response surface methodology applied to the evaluation of the SO 2 sorption process in two Brazilian limestones

This paper proposes a response surface methodology to evaluate the influence of the particle size and temperature as variables and their interaction on the sulfation process using two Brazilian limestones, a calcite (ICB) and a dolomite (DP). Experiments were performed according to an experimental design [central composite rotatable design (CCRD)] carried out on a thermogravimetric balance and a nitrogen adsorption porosimeter. In the SO 2 sorption process, DP was shown to be more efficient than ICB. The best results for both limestones in relation to conversion and Brunauer-Emmett-Teller (BET) surface area were obtained under central point conditions (545 μm and 850 C for DP and 274 μm and 815 C for ICB). The optimal values for conversion were 52% for DP and 37% for ICB. For BET surface area, the optimal values were 35 m2 g-1 for DP and 45 m2 g-1 for ICB. A relationship between conversion and pore size distribution has been established. The experiments that showed higher conversions also exhibited more pores in the region between 20 and 150 Å and larger BET surface area, indicating that the amount of smaller pores may be an important factor in the reactivity of limestones. © 2013 American Chemical Society.

Synthesis and characterization of lead zirconate titanate (PZT) obtained by two chemical methods

Lead zirconate titanate (PZT) was synthesized at the ratio of Zr/Ti=52/48 using two synthesis methods: the polymeric precursor method (PPM) and the microwave-assisted hydrothermal method (MAHM). The synthesized materials were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), particle size distribution by sedimentation, hysteresis measurements and photoluminescence (PL). The results showed that PZT powders are composed of tetragonal and rhombohedral phases. Different particle sizes and morphologies were obtained depending upon the synthesis method. From the hysteresis loop verified that PZT powders synthesized by the PPM have a typical loop of ferroelectric material and are more influenced by spatial charges while particles synthesized by the MAHM have a hysteresis loop similar to paraelectric material and are less influenced by spatial charges. Both samples showed PL behavior in the green region (525 nm) whereas the sample synthesized by the PPM showed higher intensity in spectra. © 2013 Elsevier Ltd and Techna Group S.r.l.