A structural model of Australia as a small open economy

This paper sets up and estimates a structuralmodel of Australia as a small open economyusing Bayesian techniques. Unlike other recentstudies, the paper shows that a small microfoundedmodel can capture the open economydimensions quite well. Specifically, the modelattributes a substantial fraction of the volatilityof domestic output and inflation to foreigndisturbances, close to what is suggested by unrestrictedVAR studies. The paper also investigatesthe effects of various exogenous shockson the Australian economy.

A medium-scale open economy model of Australia

We estimate an open economy dynamic stochastic general equilibrium (DSGE)model of Australia with a number of shocks, frictions and rigidities, matching alarge number of observable time series. We find that both foreign and domesticshocks are important drivers of the Australian business cycle.We also find that theinitial impact on inflation of an increase in demand for Australian commoditiesis negative, due to an improvement in the real exchange rate, though there is apersistent positive effect on inflation that dominates at longer horizons.

Monetary policy and exchange rate volatility in a small open economy

We lay out a small open economy version of the Calvo sticky price model, and show how the equilibrium dynamics can be reduced to simple representation in domestic inflation and the output gap. We use the resulting framework to analyze the macroeconomic implications of three alternative rule-based policy regimes for the small open economy: domestic inflation and CPI-based Taylor rules, and an exchange rate peg. We show that a key difference amongthese regimes lies in the relative amount of exchange rate volatility that they entail. We also discuss a special case for which domestic inflation targeting constitutes the optimal policy, and where a simple second order approximation to the utility of the representative consumer can be derived and used to evaluate the welfare losses associated with the suboptimal rules.

Comparative advantage and the cross-section of business cycles

Business cycles are both less volatile and more synchronized with the world cycle in rich countries than in poor ones. We develop two alternative explanations based on the idea that comparative advantage causes rich countries to specialize in industries that use new technologies operated by skilled workers, while poor countries specialize in industries that use traditional technologies operated by unskilled workers. Since new technologies are difficult to imitate, the industries of rich countries enjoy more market power and face more inelastic product demands than those of poor countries. Since skilled workers are less likely to exit employment as a result of changes in economic conditions, industries in rich countries face more inelastic labour supplies than those of poor countries. We show that either asymmetry in industry characteristics can generate cross-country differences in business cycles that resemble those we observe in the data.

How do very open economies adjust to large immigration flows? Recent evidence from Spanish regions

In recent years, Spain has received unprecedented immigration flows. Between 2001 and 2006 the fraction of the population born abroad more than doubled, increasing from4.8% to 10.8%. For Spanish provinces with above-median inflows (relative to population),immigration increased by 24% the number of high school dropouts while only increasingcollege graduates by 11%. We study different channels by which regional labor markets haveabsorbed the large increase in relative supply of low educated workers. We identify theexogenous supply shock using historical immigrant settlement patterns by country of origin.Using data from the Labor Force Survey and the decennial Census, we find a large expansion ofemployment in high immigration regions. Disaggregating by industry, the absorption operatedthrough large increases in the share of low-educated workers, compared to the same industry inlow-immigration regions. We do not find changes in sectoral specialization. Overall, andperhaps surprisingly, the pattern of absorption is very similar to the one found in the US.

Which inflation to target? A small open economy with sticky wages indexed to past inflation

In a closed economy context there is common agreement on price inflation stabilization being one of the objects of monetary policy. Moving to an open economy context gives rise to the coexistence of two measures of inflation: domestic inflation (DI) and consumer price inflation (CPI). Which one of the two measures should be the target variable? This is the question addressed in this paper. In particular, I use a small open economy model to show that once sticky wages indexed to past CPI inflation are introduced, a complete inward looking monetary policy is no more optimal. I first, derive a loss function from a secondorder approximation of the utility function and then, I compute the fully optimalmonetary policy under commitment. Then, I use the optimal monetary policy as a benchmark to compare the performance of different monetary policy rules. The main result is that once a positive degree of indexation is introduced in the model the rule performing better (among the Taylor type rules considered) is the one targeting wage inflation and CPI inflation. Moreover this rule delivers results very close to the one obtained under the fully optimal monetary policy with commitment.

Tertiary Himalayan structures and metamorphism in the Kulu Valley (Mandi-Khoksar transect of the Western Himalaya) - Shikar-Beh-nappe and crystalline nappe

The Crystalline Nappe of the High Himalayan Crystalline has been examined along the Kulu Valley and its vicinity (Mandi-Khoksar transect). This nappe was believed to have undergone deformation related only to its transport towards the SW essentially during the `'Main Central Thrust event''. New data has led to the conclusion that during the Himalayan orogeny, two distinctive phases, related to two opposite transport directions, characterize the evolution of this part of the chain, before the creation of the late NE-vergent backfolding. The first phase corresponds to an early NE-vergent folding and thrusting, creating the Tandi Syncline and the NE-oriented Shikar Beh Nappe stack, with a displacement amplitude of about 50 km. Two schistosities, together with a strong stretching lineation are developed at a deep tectonic level under amphibolite facies conditions (kyanite-staurolite-garnet-two mica schists). At a higher tectonic level and in the southern part of the section (Tandy Syncline and southern Kulu Valley between Kulu and Mandi) one or two schistosities are developed in the greenschist facies grade rocks (garnet-biotite and biotite schists). These structures and the associated Barrovian type metamorphism are all related to the NE-verging Shikar Beh Nappe. The creation of the NE-verging Shikar Beh Nappe may be explained by the reactivation of a SW dipping listric normal fault of the N Indian flexural passive margin, during the early stages of the Himalayan orogeny. In the second phase, the still hot metamorphic rocks of the Shikar Beh Nappe were folded and thrust towards the SW (mainly along the MBT and the MCT with a displacement in excess of 100 km) onto the cold, low-grade metamorphic rocks of the Larji-Kulu-Rampur Window or, near Mandi, on the non-metamorphic sandstones of the Ganges Molasse (Siwaliks). Sense of shear criteria and a strong NE-SW stretching-lineation indicate that the Crystalline Nappe has been overthrusted towards the SW. Thermometry on synkinematically crystallised garnet-biotite and garnet-hornblende pairs reveals the lower amphibolite facies temperature conditions related to the Crystalline Nappe formation. From the muscovite and biotite Rb-Sr cooling ages, the Shikar Beh Nappe emplacement occurred before 32 Ma and the southwestward thrusting of the Crystalline Nappe began before 21 Ma. Our model involving two opposite directions of thrusting goes against the conventional idea of only one main SW-oriented transport direction in the High Himalayan Crystalline Nappes.

Temporal Geobiotic Mapping: a conceptual mapping technique toward visualising geobiotic areas in cross-section

Geobiota are defined by taxic assemblages (i.e., biota) and their defining abiotic breaks, which are mapped in cross-section to reveal past and future biotic boundaries. We term this conceptual approach Temporal Geobiotic Mapping (TGM) and offer it as a conceptual approach for biogeography. TGM is based on geological cross-sectioning, which creates maps based on the distribution of biota and known abiotic factors that drive their distribution, such as climate, topography, soil chemistry and underlying geology. However, the availability of abiotic data is limited for many areas. Unlike other approaches, TGM can be used when there is minimal data available. In order to demonstrate TGM, we use the well-known area in the Blue Mountains, New South Wales (NSW), south-eastern Australia and show how surface processes such as weathering and erosion affect the future distribution of a Moist Basalt Forest taxic assemblage. Biotic areas are best represented visually as maps, which can show transgressions and regressions of biota and abiota over time. Using such maps, a biogeographer can directly compare animal and plant distributions with features in the abiotic environment and may identify significant geographical barriers or pathways that explain biotic distributions.

Carbon and oxygen isotope study of hydrothermal carbonates in the zinc-lead deposits of the San Vicente district, central Peru: A quantitative modeling on mixing processes and CO2 degassing

Carbon and oxygen isotope studies of the host and gangue carbonates of Mississippi Valley-type zinc-lead deposits in the San Vicente District hosted in the Upper Triassic to Lower Jurassic dolostones of the Pucara basin (central Peru) were used to constrain models of the ore formation. A mixing model between an incoming hot saline slightly acidic radiogenic (Pb, Sr) fluid and the native formation water explains the overall isotopic variation (delta(13)C = - 11.5 to + 2.5 parts per thousand relative to PDB and delta(18)O = + 18.0 to + 24.3 parts per thousand relative to SMOW) of the carbonate generations. The dolomites formed during the main ore stage show a narrower range (delta(13)C = - 0.1 to + 1.7 parts per thousand and delta(18)O = + 18.7 to + 23.4 parts per thousand) which is explained by exchange between the mineralizing fluids and the host carbonates combined with changes in temperature and pressure. This model of fluid-rock interaction explains the pervasive alteration of the host dolomite I and precipitation of sphalerite I. The open-space filling hydrothermal white sparry dolomite and the coexisting sphalerite II formed by prolonged fluid-host dolomite interaction and limited CO2 degassing. Late void-filling dolomite III (or calcite) and the associated sphalerite III formed as the consequence of CO2 degassing and concomitant pH increase of a slightly acidic ore fluid. Widespread brecciation is associated to CO2 outgassing. Consequently, pressure variability plays a major role in the ore precipitation during the late hydrothermal events in San Vicente. The presence of native sulfur associated with extremely carbon-light calcites replacing evaporitic sulfates (e.g., delta(13)C = - 11.5 parts per thousand), altered native organic matter and heavier hydrothermal bitumen (from - 27.0 to - 23.0 parts per thousand delta(13)C) points to thermochemical reduction of sulfate and/or thiosulfate. The delta(13)C- and delta(18)O-values of the altered host dolostone and hydrothermal carbonates, and the carbon isotope composition of the associated organic matter show a strong regional homogeneity. These results coupled with the strong mineralogical and petrographic similarities of the different MVT occurrences perhaps reflects the fact that the mineralizing processes were similar in the whole San Vicente belt, suggesting the existence of a common regional mineralizing hydrothermal system with interconnected plumbing.

What is the importance of open habitat in a predominantly closed forest area to the dung beetle (Coleoptera, Scarabaeinae) assemblage?

What is the importance of open habitat in a predominantly closed forest to the dung beetle assemblage? The Atlantic Forest in Brazil is one of the most highly disturbed ecosystems and is mainly represented by fragmented areas. However, in places where human disturbances have ceased, certain areas are showing a natural regeneration pattern. The aim of the present study was to determine how the dung beetle assemblage responds to distinct habitat structures in a fragment of Atlantic Forest. For such, open and closed forest areas were sampled in a fragment of the Atlantic Forest in the northeastern region of Brazil. Pitfall traps baited with excrement and carrion were used to collect the beetles. A total of 7,267 individuals belonging to 35 species were captured. Canthon chalybaeus and C. mutabilis were restricted to open areas. Nearly 90% of the individuals of C. aff. simulans and Deltochilum aff. irroratum were identified in these areas. A higher percentage (> 50%) of Canthon staigi, Dichotomius aff. depressicolis and D. aff. sericeus occurred in closed areas. Abundance differed between areas, with higher values in closed areas. Richness was not influenced by the habitat structure. NMDS ordination exhibited the segregation of areas and ANOSIM confirmed that this variable explained the assemblage of dung beetle species. The findings of the present study validate that open areas are associated to more restrictive conditions, limiting a higher abundance of dung beetle. Although situated near preserved fragments, the studied open areas increase the heterogeneity of the general landscape.

Open Door Newsletter of the Library, Winter 2007

The Open Door newsletter is produced by the Iowa Commission for the Blind. It is published twice a year with information about the library programs and what is going on.