Construction supply chain modeling : a research review and interdisciplinary research agenda

Supply chain management has emerged as a popular and useful concept in the construction industry and research community since the mid 1990s. Research in construction supply chain management draws from a broad range of disciplines, notably: (1) Industrial organization economics to better understand market structure and forces and their effect on firm and supply chain behavior and (2) Analytic modeling of supply chains to improve supply chain performance along metrics such as speed, cost, reliability, quality, etc. Both industrial organization and analytic modeling provide useful but ultimately incomplete perspectives and prescriptions for construction supply chain management. As such, this paper proposes development of an interdisciplinary research agenda that draws from both fields. Towards that agenda, a review of research is presented to introduce the main ideas, relevant literature, and theory and methods in each of the two areas. From these independent reviews, applications that could benefit from a combined perspective are identified and used as a basis for development of an interdisciplinary research agenda.

Review of the quality of studies on the economic effects of smoke-free policies on the hospitality industry

Objective: To compare the quality and funding source of studies concluding a negative economic impact of smoke-free policies in the hospitality industry to studies concluding no such negative impact.

Data sources: Researchers sought all studies produced before 31 August 2002. Articles published in scientific journals were located with Medline, Science Citation Index, Social Sciences Citation Index, Current Contents, PsychInfo, Econlit, and Healthstar. Unpublished studies were located from tobacco company websites and through internet searches.

Study selection: 97 studies that made statements about economic impact were included. 93% of the studies located met the selection criteria as determined by consensus between multiple reviewers.

Data extraction: Findings and characteristics of studies (apart from funding source) were classified independently by two researchers. A third assessor blind to both the objective of the present study and to funding source also classified each study.

Data synthesis: In studies concluding a negative impact, the odds of using a subjective outcome measure was 4.0 times (95% confidence interval (CI) 1.4 to 9.6; p = 0.007) and the odds of not being peer reviewed was 20 times (95% CI 2.6 to 166.7; p = 0.004) that of studies concluding no such negative impact. All of the studies concluding a negative impact were supported by the tobacco industry. 94% of the tobacco industry supported studies concluded a negative economic impact compared to none of the non-industry supported studies.

Conclusion: All of the best designed studies report no impact or a positive impact of smoke-free restaurant and bar laws on sales or employment. Policymakers can act to protect workers and patrons from the toxins in secondhand smoke confident in rejecting industry claims that there will be an adverse economic impact.

Towards the development of a conceptual design management model for remote sites

Remote and environmentally sensitive sites present unique challenges for participants involved in the design and construction process. Worldwide advances in information technology coupled with improved site accessibility and manageability has enabled the construction industry to undertake such projects with greater ease. Furthermore, research on information technology in construction has begun to focus our attentions on our increased ability to work virtually in distributed teams. These remote sites have a range of development potential as clients have varied interests including; tourism, scientific investigation and resource exploration and processing which impact upon the management of the design process. These sites pose unique challenges to the project teams and in particular for the management of project design. The conceptual design phase is often marked by an iterative and creative process, which tends to be a sociologically oriented world where designers respond to a range of functional, aesthetic, environmental and even spiritual concerns. Strategic decisions made during the briefing and conceptual design stage may impact upon construction logistics and sustainability. Detailed design for construction tends to be a production oriented world. There is a significant body of literature that addresses the application of lean thinking to improving the interface between detailed design and construction production. There is little literature that takes a holistic view of design management for remote sites. The lean design management field of research has much to contribute to the design management of these projects. The review of the literature indicated that much of the lean thinking has been primarily concerned with sequential production. However, lean thinking is based upon principles of flow and value, which is also conducive to the complex process involved in design management for remote sites. A conceptual model is developed that considers both the production and sociological approaches to design management, in response to the peculiar demands of the site and their project teams.

The development of 'soft' strategic indicators for international client satisfaction

Despite the increasing significance of the construction industry as an emerging sector of the Australian economy, there is inadequate research performed on construction design firms in terms of theoretical and empirical foundations. Although past research has identified the barriers and success factors for firm market entry, evidence suggests that to date no research has explicitly explored the sustainability of construction design firms in international markets. SMEs and their approach to firm internationalisation differ significantly from large manufacturing firms and a vast majority of construction design firms operate as SMEs. This paper develops a sustainable business model for construction design SMEs, which rely upon the development of clear Client Following (CF) versus Market Seeking (MS) strategies to support internal firm strategic and operational management. The understanding of these strategies is vital as the application of either will shape the design management approach of firms, which would in turn impact on the sustainability of these firms in foreign markets. Long-term sustainability of firms in international markets relies heavily upon client satisfaction. Client and project team participants’ communication during various design processes has often been problematic and the added difficulty of communicating across international boundaries further compounds the problem of capturing and maintaining client’s requirements. Therefore this paper develops a model for business sustainability of Australian construction design firms working in international markets by exploring factors that affect client satisfaction across international boundaries, through the development of business performance indicators. These include not only the critical financial capital but also other ‘softer’ indicators, namely: social, cultural and intellectual capital. These act as a firm’s measure of success and the acquisition of this type of capital will provide significant advantages to firms’ success, hence sustainability in international markets.

Construction supply chain management : a research review and interdisciplinary research agenda

Supply chain management has emerged as a popular and useful concept in the construction industry and research community since the mid 1990s. Research in construction supply chain management draws from a broad range of disciplines, notably: (1) industrial organization economics to better understand market structure and forces and their effect on firm and supply chain behavior and (2) Analytic modeling of supply chains to improve supply chain performance along metrics such as speed, cost, reliability, quality, etc. Both industrial organization and analytic modeling provide useful but ultimately incomplete perspectives and prescriptions for construction supply chain management. As such, this paper proposes development of an interdisciplinary research agenda that draws from both fields. Towards that agenda, a review of research is presented to introduce the main ideas, relevant literature, and theory and methods in each of the two areas. From these independent reviews, applications that could benefit from a combined perspective are identified and used as a basis for development of an interdisciplinary research agenda.

Construction management : new directions

This book brings together, in a single volume, the main management concepts relevant to the construction industry, providing an objective account of the concepts and showing how they interrelate: value management, buildability, benchmarking, total quality management, partnering and alliancing, supply chain management (new for this edition), and re-engineering." "In addition to a new chapter on supply chain management, a new section on strategic alliancing has been added. Text and references have been updated throughout

The use of ultrasonic cleaning for ultrafiltration membranes in the dairy industry

The ultrafiltration of whey solutions is a common feature of dairy processes. However, the frequent fouling of ultrafiltration membranes and the subsequent cleaning cycle significantly affect the economics of such a process. In this work, we investigated the effect of ultrasonics on the cleaning of whey-fouled membranes and examined the variables that influence this effect. Experiments were conducted using a small single sheet membrane unit that was immersed totally within an ultrasonic bath.

Results show that the use of ultrasonics enhances the flux recovery following fouling. The extent of flux recovery is independent of the length of sonication time and increases with ultrasonic power. The use of surfactants in combination with ultrasonic irradiation shows a synergistic effect, providing a better efficiency than either cleaning process alone. Repetitive use of ultrasonic cleaning over a 1 month period does not result in any significant change in the permeate flux of a cleaned membrane, indicating that the ultrasonic treatment does not appear to damage the membrane structure itself.

Construction management : new directions

This book brings together, in a single volume, the main management concepts relevant to the construction industry, providing an objective account of the concepts and showing how they interrelate: value management, buildability, benchmarking, total quality management, partnering and alliancing, supply chain management (new for this edition), and re-engineering." "In addition to a new chapter on supply chain management, a new section on strategic alliancing has been added. Text and references have been updated throughout.

Construction supply chain modeling : a research review and interdisciplinary research agenda

Supply chain management has emerged as a popular and useful concept in the construction industry and research community since the mid 1990s. Research in construction supply chain management draws from a broad range of disciplines, notably: (1) industrial organization economics to better understand market structure and forces and their effect on firm and supply chain behavior and (2) Analytic modeling of supply chains to improve supply chain performance along metrics such as speed, cost, reliability, quality, etc. Both industrial organization and analytic modeling provide useful but
ultimately incomplete perspectives and prescriptions for construction supply chain management. As such, this paper proposes development of an interdisciplinary research agenda that draws from both fields. Towards that agenda, a review of research is presented to introduce the main ideas, relevant literature, and theory and methods in each of the two areas. From these independent reviews, applications that could benefit from a combined perspective are identified and used as a basis for development of an
interdisciplinary research agenda.

Energy analysis of the construction of office buildings /by Graham J. Treloar

Buildings have a significant impact on the environment due to the energy required for the manufacture of construction materials. The method of assessing the energy embodied in a product is known as energy analysis. Detailed office building embodied energy case studies are very rare. However, there is evidence to suggest that the energy requirements for the construction phase of commercial buildings, including the energy embodied in materials, is a significant component of the life cycle energy requirements. This thesis sets out to examine the current state of energy analysis, determine the national average energy intensities < i.e. embodied energy rates < for building materials and assess the significance of using national average energy intensities for the energy analysis of a case study office building. Likely ranges of variation in the building material embodied energy rates from the national averages are estimated and the resulting distribution for total embodied energy in the case study building simulated. Strategies for improving the energy analysis methods and data are suggested. Detailed energy analysis is shown to be a useful indicative method of quantifying the energy required for the construction of buildings.

Use and cost effectiveness of computer based training in the insurance industry

Training is essential to the growth and economic well-being of a nation. This need for training pervades all levels of industry, from a national level where a country’s well being is enhanced by training, to each company where productivity is improved, down to the individual whose skills are enhanced and as a result improve their position in the employment marketplace. The Australian Bureau of Statistics report ‘Training and Education Experience –Australia’ (ABS 1993) indicates that training in Australia is undertaken at a significant level with some 86% of employers undertaking some form of training. This is slightly higher in the Finance industry at a little over 89%. On the job training is undertaken by 82% of employers and off the job training is used by 47% of employers. In 80% of the off the job cases these courses were conducted in a conventional manner using an instructor. The remaining 20% of cases were either self paced (14%) or instructor based (6%). These latter cases could involve Computer Based Training (CBT). The report, referred to in the last paragraph, also indicates that a significant aspect of business in Australia is that 95% of businesses have less than 20 staff. This poses significant problems in that the ability to deliver effective training is limited. With businesses as small as these their size does not permit them to carry specialist training personnel so this role falls to the senior staff. These people already have a full workload and their ability to be able to take on training duties is limited. In addition these people were employed for their technical skills, not training. It may be that their ability to fill the role of a trainer is not good and as a result the training may not be very effective. In addition, small business has difficulty in releasing staff for training, The difficulties faced by small business were recognised by the Australian National Training Authority in their 1995 report which indicated that there was a need to develop a ‘training culture’ among small business employers. The authority made a commitment to provide flexible delivery strategies. This includes Computer Based Training (CBT). CBT has existed since the 1970’s. It came on to the scene with a flourish and tended to provide ‘page turning’ programs or ‘drill and practice programs’. In limited areas this form of training became popular but its popularity waned in the 80’s. With the advent of better graphical displays, larger and faster memory, and improved programs in the 1990’s the quality of CBT today is superior to those offered in the 70’s and has greater appeal. Today, still photographs and video clips can be displayed and made interactive. Because of this CBT is making a comeback and starting to have a greater impact. The insurance industry covers a wide range of companies in Australia, these companies vary in size from companies with employees in the thousands to companies with less than five staff. While the needs of the employees of each are similar the ability of these companies to deliver the training varies significantly. Any training can be divided into two parts. Internal or on the job training and external. External training deals with those aspects that concern the industry as a whole whereas internal training affects the individual company. Internal training would deal with matters like company procedures, company products and the like. External training deals with matters such as legislation, products generally, and the like. In the insurance industry the major problem arises with the small companies. Insurance companies would tend to be large in size and able to cover their training costs but the insurance brokers who would make up, numerically, the major number of companies would have a significant number of companies that fall into the 20 staffer less category. In fact many would have a staff of less than 5. While CBT can benefit all companies it is these small companies that could benefit from it the most. This thesis examines: • The place of CBT in training, its cost and effectiveness. • The incidence of CBT in the insurance industry and how the industry determines its effectiveness. • If a program that meets an industry need is able to be produced at a realistic price?