989 resultados para Symphonies (Chamber orchestra)
Resumo:
Catalunya és un dels territoris on hi ha hagut més auge del sector de la cervesa artesana, i són molt nombroses les microcerveseries i les botigues especialitzades on es poden trobar els recursos materials necessaris, a més de ser centres difusió de coneixements relacionats. Així, doncs, aquest projecte està emmarcat en un context que permet el desenvolupament de tècniques d’elaboració de cervesa artesana. Aquest projecte es basa en la construcció d’un equip amb materials reutilitzats i amb un pressupost limitat que permet reproduir a petita escala els processos d’elaboració que es duen a terme en les microcerveseries artesanes actuals. El projecte s’ha assentat sobre la comprensió dels fonaments teòrics i pràctics del procés d’elaboració de cervesa, i amb l’experiència inicial d’elaboració de cervesa amb un equip bàsic de tipus homebrewer. Per minimintzar costos els tancs s’han construït a partir de barrils de cervesa i les parts sobrants s’han aprofitat per a altres elements. S’han emprat elements quotidians com una olla a pressió i s’ha construït un sistema regulador de pressió (per al tanc de fermentació cilindrocònic isobàric construït) en lloc d’adquirir-lo. S’ha posat l’èmfasi en minimitzar la necessitat de manipulació manual durant l’elaboració. Per tant, s’han instal·lat els components de l’equip formant un circuit tancat amb sistema de bombeig, i s’ha incorporat un sistema que permet el control i la lectura de les temperatures de cada procés. Altres elements són el sistema de filtres amb mecanisme de tub en forma d’ela (que permet l’extracció del most dels tanc de maceració i de cocció d’una manera efectiva i sense necessitat de manipulació) i el sistema de dutxa (que permet automatitzar el procés de rentat i filtrat). Un element que distingeix aquest equip d’altres equips emprats en algunes microcerveseries artesanes és el tanc de fermentació cilindrocònic isobàric amb vàlvula controladora de pressió, que permet prescindir de la doble fermentació en ampolla, ja que permet aprofitar el gas carbònic produït durant la fermentació per la carbonatació de la cervesa. Es pot concloure que gràcies a les seves característiques, l’equip permet realitzar successives elaboracions obtenint el mateix producte amb les mateixes característiques organolèptiques, principalement gràcies a la cambra de fermentació, que permet realitzar les etapes de fermentació, maduració i clarificació controlant la temperatura desitjada; al tanc de maceració amb aïllament, que permet realitzar el procés a temperatura constant sense pèrdues tèrmiques i al sistema de control de temperatura de totes les etapes. L’únic inconvenient és que, degut a la manca pressupostària, ha estat impossible l’adquisició d’un sistema d’embotellament isobàric que permeti realitzar l’embotellament sense pèrdues del gas carbònic. Per tant, el producte final pot embotellar-se amb una lleugera pèrdua de gas o es pot emmagatzemar en el mateix fermentador cilindrocònic per al seu consum directe, a l’estil d’alguns brewpubs.
Resumo:
Objective The authors have sought to study the calibration of a clinical PKA meter (Diamentor E2) and a calibrator for clinical meters (PDC) in the Laboratory of Ionizing Radiation Metrology at Instituto de Energia e Ambiente - Universidade de São Paulo. Materials and Methods Different qualities of both incident and transmitted beams were utilized in conditions similar to a clinical setting, analyzing the influence from the reference dosimeter, from the distance between meters, from the filtration and from the average beam energy. Calibrations were performed directly against a standard 30 cm3 cylindrical chamber or a parallel-plate monitor chamber, and indirectly against the PDC meter. Results The lowest energy dependence was observed for transmitted beams. The cross calibration between the Diamentor E2 and the PDC meters, and the PDC presented the greatest propagation of uncertainties. Conclusion The calibration coefficient of the PDC meter showed to be more stable with voltage, while the Diamentor E2 calibration coefficient was more variable. On the other hand, the PDC meter presented greater uncertainty in readings (5.0%) than with the use of the monitor chamber (3.5%) as a reference.
Resumo:
Inflammation is a complex process that implies the interaction between cells and molecular mediators, which, when not properly 'tuned,' can lead to disease. When inflammation affects the eye, it can produce severe disorders affecting the superficial and internal parts of the visual organ. The nucleoside adenosine and nucleotides including adenine mononucleotides like ADP and ATP and dinucleotides such as P(1),P(4)-diadenosine tetraphosphate (Ap4A), and P(1),P(5)-diadenosine pentaphosphate (Ap5A) are present in different ocular locations and therefore they may contribute/modulate inflammatory processes. Adenosine receptors, in particular A2A adenosine receptors, present anti-inflammatory action in acute and chronic retinal inflammation. Regarding the A3 receptor, selective agonists like N(6)-(3-iodobenzyl)-5'-N-methylcarboxamidoadenosine (CF101) have been used for the treatment of inflammatory ophthalmic diseases such as dry eye and uveoretinitis. Sideways, diverse stimuli (sensory stimulation, large intraocular pressure increases) can produce a release of ATP from ocular sensory innervation or after injury to ocular tissues. Then, ATP will activate purinergic P2 receptors present in sensory nerve endings, the iris, the ciliary body, or other tissues surrounding the anterior chamber of the eye to produce uveitis/endophthalmitis. In summary, adenosine and nucleotides can activate receptors in ocular structures susceptible to suffer from inflammatory processes. This involvement suggests the possible use of purinergic agonists and antagonists as therapeutic targets for ocular inflammation.
Resumo:
PURPOSE: We investigated the changes in physiological and performance parameters after a Live High-Train Low (LHTL) altitude camp in normobaric (NH) or hypobaric hypoxia (HH) to reproduce the actual training practices of endurance athletes using a crossover-designed study. METHODS: Well-trained triathletes (n = 16) were split into two groups and completed two 18-day LTHL camps during which they trained at 1100-1200 m and lived at 2250 m (P i O2 = 111.9 ± 0.6 vs. 111.6 ± 0.6 mmHg) under NH (hypoxic chamber; FiO2 18.05 ± 0.03%) or HH (real altitude; barometric pressure 580.2 ± 2.9 mmHg) conditions. The subjects completed the NH and HH camps with a 1-year washout period. Measurements and protocol were identical for both phases of the crossover study. Oxygen saturation (S p O2) was constantly recorded nightly. P i O2 and training loads were matched daily. Blood samples and VO2max were measured before (Pre-) and 1 day after (Post-1) LHTL. A 3-km running-test was performed near sea level before and 1, 7, and 21 days after training camps. RESULTS: Total hypoxic exposure was lower for NH than for HH during LHTL (230 vs. 310 h; P < 0.001). Nocturnal S p O2 was higher in NH than in HH (92.4 ± 1.2 vs. 91.3 ± 1.0%, P < 0.001). VO2max increased to the same extent for NH and HH (4.9 ± 5.6 vs. 3.2 ± 5.1%). No difference was found in hematological parameters. The 3-km run time was significantly faster in both conditions 21 days after LHTL (4.5 ± 5.0 vs. 6.2 ± 6.4% for NH and HH), and no difference between conditions was found at any time. CONCLUSION: Increases in VO2max and performance enhancement were similar between NH and HH conditions.
Resumo:
This paper describes a sample holder for the electrical measurement of oxides or conducting polymers in the form of pellets or films which are used as gas sensors. The system makes it possible to control the sample temperature, the gas pressure and composition. The temperature in the sample can be changed from 25ºC to 450ºC, and the gas pressure in the chamber is controlled between 5 ¥ 10-4 and 1000 mbar. The performance of the system in resistance measurements of doped tin oxide pellets and polyaniline films deposited on platinum electrodes for methane is analyzed.
Resumo:
An automatic dispenser based on a flow-injection system used to introduce sample and analytical solution into an inductively coupled plasma mass spectrometer through a spray chamber is proposed. Analytical curves were constructed after the injection of 20 to 750 µL aliquots of a multielement standard solution (20.0 µg L-1 in Li, Be, Al, V, Cr, Mn, Ni, Co, Cu, Zn, As, Se, Sr, Ag, Cd, Ba, Tl, Pb) and the acquisition of the integrated transient signals. The linear concentration range could be extended to ca. five decades. The performance of the system was checked by analyzing a NIST 1643d reference material. Accuracy could be improved by the proper selection of the injected volume. Besides good precision (r.s.d. < 2%), the results obtained with the proposed procedure were closer to the certified values of the reference material than those obtained by direct aspiration or by injecting 125 µL of several analytical solutions and samples.
Resumo:
Tutkielman tavoitteena on selvittää kuinka tilintarkastajista tilintarkastuslautakunnalle tehdyt kantelut ovat muuttuneet vuosien 1990–2000 ja 2001–2006 aikana. Tutkimuksen tarkoituksena on tarkastella ovatko kansainvälistymisen aiheuttamat muutokset tilintarkastusta säätelevissä laeissa johtaneet kanteluiden määrälliseen tai laadulliseen muutokseen. Teoreettinen osa tarkastelee tilintarkastusta lainsäädännöllisesti sekä TILA:n tehtäviä tilintarkastusta valvovana elimenä. Empiirinen osa tutkii TILA:lle tehtyjen kanteluiden ratkaisuselosteita vuosien 1990–2000 ja 2001–2006 välillä. Kanteluita tutkitaan sekä määrällisesti että laadullisesti. Tulokset osoittavat että kanteluiden määrässä on tapahtunut muutos; vuosina 2001–2006 kanteluiden määrä on selvästi laskenut. Kanteluiden laadussa, kun sillä käsitetään kanteluiden syy sekä epäilyksen alainen toiminta, ei ole tapahtunut muutosta mutta sanktioiden jakaantumisessa eri toiminnan mukaan puolestaan on tapahtunut muutosta.
Resumo:
An on-line electrodissolution procedure implemented in a flow injection system for determination of copper, zinc and lead in brasses alloys by ICP-AES is described. Sample dissolution procedure was carried out by using a PTFE chamber and a DC power supply with constant current. Solid sample was attached to chamber as anode and a gold tubing coupled in the chamber was used as cathode. An electrolytic solution flowing through the gold tubing closed the electric circuit with sample, in order to provide condition for electric dissolution when the DC power supply was switched on. The best results were achieved by using a 1.5 mol l-1 nitric acid solution as electrolyte and a 2.5 A current intensity. The procedure presented a good performance characterized by a relative standard deviation better than < 5% (n=5) and a sample throughput of 180 determinations per hour for Cu, Zn and Pb. Results were in agreement with those obtained by conventional acid dissolution (99% confidence level).
Resumo:
A photochemical reaction mechanism for the description of air quality in Brazilian urban regions is described and evaluated by comparison with chamber experiments. The mechanism was developed for use in ozone modeling and application of control strategies. The oxidation of ethanol and methyl-ter-butyl-ether is also considered. Using this chemical model, a trajectory simulation of Brazil Avenue, Rio de Janeiro, was performed. The model predicts that ozone should reach a maximum of 22.4 ppb at 14:57 h. This value is in good agreement with the experimental measurements of 22.5 ppb for 14:00 h and 22.3 ppb for 15:00 h.
Resumo:
This study presents an automated system for potentiometric determination of free and total cyanide which employs a homogeneous membrane tubular ion-selective electrode. After the electrode is assembled, it is connected to a system composed of 3 three-way solenoid valves, sample line, carrier line, acid stream, and gas diffusion chamber. A Turbo Pascal® computer program, developed specifically for this task, automatically performs all the steps involved in data acquisition and processing. The proposed analytical procedure offers operational simplicity, since detection is performed by a tubular electrode, whose assembly is fast and easy. The system has shown reproducibility (r.s.d. < 0.5%, n=6) and high speed (30 readings/hour); it is efficient for determination of free and total cyanide in waste waters of starch processing plants. The detection limit was 1.2x10-5 and 1.5x10-5 mol L-1, for determination of free and total cyanide, respectively. The linear response range was between 1.2x10-5 and 1.0x10-2 mol L-1 for free cyanide and between 1.5x10-5 and 1.0x10-2 for total cyanide.
Resumo:
Anodic electrodissolution procedure in a flow injection system for determination of constituents in alloys is discussed. This approach implement sample preparation procedure by using a chamber and a DC power supply with constant direct current. Solid sample was attached to chamber as anode. In this review a general overview of these procedure is presented. The procedure presented a good performance characterized by a high sample throughput determinations, good accuracy and relative standard deviation.
Resumo:
r1952, Carnegie Hall, New York.
Resumo:
r1952, Carnegie Hall, New York.
Resumo:
Soitinnus: Sello, ork.