Comparação da difusão de fósforo em solos brasileiros para diferentes fertilizantes granulados usando fluorescência de raios X por reflexão total por radiação síncroton (SR-TXRF)

O fósforo (P) é um nutriente essencial para o crescimento das plantas. Milhões de toneladas de P são aplicados aos solos anualmente. No entanto, apenas uma pequena fração do P aplicado com fertilizantes é aproveitada nas lavouras no ano de aplicação, bem como a eficácia do fertilizante fosfatado diminui com o tempo. Para melhorar a nossa compreensão dos mecanismos, a esta resposta do P no campo, este trabalho visa estudar a migração desse elemento em solos tropicais brasileiros (Latossolo vermelho e Latossolo amarelo) tratados com três tipos de fertilizantes: fosfato monoamônico (MAP), o polímero revestido de fosfato monoamônio (MAPP) e fosfato organomineral (OMP) em um experimento de placa de Petri. Fluorescência de Raios X por Reflexão Total (TXRF) foi usada para determinar o fluxo difusivo P a distâncias radiais diferentes (entre 0 e 7,5 mm, entre 7,5 e 13,5 mm, 13,5 e 25,5 mm e entre 25,5 e 43 mm) a partir do grânulo de fertilizante. As análises usando TXRF foram realizadas no Laboratório Nacional de Luz Síncrotron (LNLS), em Campinas, São Paulo, na linha de Fluorescência de Raios X (Beamline D09B). Depois de um período de cinco semanas, a concentração total de P, Ca e Al foram obtidas e comparadas analisando o tipo de solo/textura, o pH e o respectivo extrator de P, que nesse estudo foram usados o Mehlich 1 e água régia. De forma geral, concluiu-se que 80,0 % de fósforo proveniente dos fertilizantes usados nessa proposta ficaram concentrados em distâncias menores que 10 mm do ponto de aplicação dos fertilizantes, independentemente do tipo de solo, do pH e da respectiva textura. Em relação à utilização da técnica TXRF, o sistema foi eficiente, dentre outras características, na discriminação dos picos de fósforo dos picos de enxofre, principalmente nas amostras de solo usadas a partir da extração com Mehlich 1. Destaca-se isso, pois os raios X característicos desses elementos são muitos próximos.

Propriedades fotoluminescentes e higroscopia do composto SrAl2O4 dopado com íons de Ni2+

Amostras foram preparadas pelo método de difusão a partir dos reagentes químicos SrCO3, Al2O3 e NiO em proporções estequiométricas. Medidas por difração de raios X mostraram que as amostras possuem uma única fase: SrAl2O4. Neste trabalho apresentamos imagens de microscopia eletrônica de varredura das amostras SrAl2O4 dopadas com 0,1%, 0,5%, 1,0%, 2,0%, 5,0% e 10,0% de íons de Ni2+, medidas de fotoluminescência, excitação da fotoluminescência da amostra SrAl2O4 dopada com 1,0% de íons de Ni2+, medidas de absorção fotoacústica das amostras SrAl2O4 dopadas com 1,0%, 2,0%, 5,0% e 10,0% de íons de Ni2+. Estas medidas foram realizadas a temperatura ambiente para investigar as transições eletrônicas dos íons divalente de níquel que entraram substitucionalmente nos sítios de Sr2+ da rede do SrAl2O4. Os resultados ópticos mostram a existência de três centros emissores de Ni2+. De acordo com a literatura, a estrutura do SrAl2O4 é composta de dois sítios octaédrico distintos de íons de Sr2+, o Sr12+ e o Sr22+, cujas distâncias médias Sr1 O e Sr2 O são, respectivamente, 2,800 Ǻ e 2,744 Ǻ. Visto que os íons de Ni2+ tendem a substituir os íons de Sr2+, devido ao fato de possuírem a mesma valência, é necessário considerar que uma parte dos íons de Ni2+ ocuparam os sítios dos íons de Al3+ na rede do SrAl2O4 para justificar a existência de um terceiro centro emissor de Ni2+ nesse composto. Uma novo sítio octaédrico para os íons de Ni2+ foi estimado a partir do valor da aresta do sítio tetraédrico ocupado pelos íons de Al3+ na rede do SrAl2O4 (considerando o raio iônico do Ni2+ como aproximadamente 40% maior do que o raio iônico do Al3+). As transições eletrônicas presentes nos espectros de excitação e absorção fotoacústica permitiram determinar os parâmetros de campo cristalino (Dq) e Racah (B e C) para os três sítios diferentes ocupados pelos íons de Ni2+ no SrAl2O4. Neste caso, os resultados mostraram que o sítio II dos íons de Ni2+ é associado à posição do Sr1 e possuem um parâmetro Dq menor e que o parâmetro Dq associado aos íons de Ni2+ que substituíram os íons de Sr no sitio I, o qual, por sua vez é associado à posição do Sr2. E, por fim, o sítio III que possui o menor parâmetro de campo cristalino Dq, portanto a maior distância íon ligante, é identificado como aquele relacionado ao rearranjo octaédrico local das antigas posições de Al3+. O caráter higroscópico do SrAl2O4:Ni2+ é observado a partir dos espectros de absorção fotoacústica e os modos de vibração de estiramento das ligações Ni OH e O H são identificadas nos espectros.

Modelagem Numérica da Construção de Aterro Instrumentado na Baixada Fluminense, Rio de Janeiro.

A complexidade na previsão do comportamento de aterros sobre solos compressíveis representa um desafio para os engenheiros geotécnicos, mesmo os mais experientes. As limitações das teorias de análise e a dificuldade na seleção de parâmetros muitas vezes acarretam em estimativas de recalque incoerentes com a observação de campo. O presente trabalho tem como objetivo reproduzir a seqüência construtiva de extenso aterro, instrumentado, executado na Baixada Fluminense, Rio de Janeiro, para implantação da indústria Rio Polímeros, utilizando o programa PLAXIS. Os parâmetros geotécnicos foram definidos a partir de ensaios oedométricos, tendo sido realizado um estudo prévio sobre a qualidade das amostras. Estes parâmetros foram confrontados com a experiência local, que resume mais de 30 anos de investigações na argila mole da Baixada Fluminense, no Rio de Janeiro. Apesar da distância entre os locais de investigações, não houve diferenças significativas entre os parâmetros geotécnicos. As análises numéricas foram realizadas considerando-se diferentes hipóteses para o coeficiente de permeabilidade, de forma a reproduzir adequadamente as leituras de placa de recalque e poropressão registradas no campo. Este parâmetro teve grande influência na resposta da modelagem numérica, tendo sido obtidos bons resultados com valores de permeabilidade variando em função da profundidade.

The calculation of acoustic shielding of engine noise by the Silent Aircraft Airframe

The Silent Aircraft airframe has a flying wing design with a large wing planform and a propulsion system embedded in the rear of the airframe with intake on the upper surface of the wing. In the present paper, boundary element calculations are presented to evaluate acoustic shielding at low frequencies. Besides the three-dimensional geometry of the Silent Aircraft airframe, a few two-dimensional problems are considered that provide some physical insight into the shielding calculations. Mean flow refraction effects due to forward flight motion are accounted for by a simple time transformation that decouples the mean-flow and acoustic-field calculations. It is shown that significant amount of shielding can be obtained in the shadow region where there is no direct line of sight between the source and observer. The boundary element solutions are restricted to low frequencies. We have used a simple physically-based model to extend the solution to higher frequencies. Based on this model, using a monopole acoustic source, we predict at least an 18 dBA reduction in the overall sound pressure level of forward-propagating fan noise because of shielding.

Gene function prediction from synthetic lethality networks via ranking on demand.

MOTIVATION: Synthetic lethal interactions represent pairs of genes whose individual mutations are not lethal, while the double mutation of both genes does incur lethality. Several studies have shown a correlation between functional similarity of genes and their distances in networks based on synthetic lethal interactions. However, there is a lack of algorithms for predicting gene function from synthetic lethality interaction networks. RESULTS: In this article, we present a novel technique called kernelROD for gene function prediction from synthetic lethal interaction networks based on kernel machines. We apply our novel algorithm to Gene Ontology functional annotation prediction in yeast. Our experiments show that our method leads to improved gene function prediction compared with state-of-the-art competitors and that combining genetic and congruence networks leads to a further improvement in prediction accuracy.

Multidirectional movements of sportfish species between an estuarine no-take zone and surrounding waters of the Indian River Lagoon, Florida

We examined movement patterns of sportfish that were tagged in the northern Indian River Lagoon, Florida, between 1990 and 1999 to assess the degree of fish exchange between an estuarine no-take zone (NTZ) and surrounding waters. The tagged f ish were from seven species: red drum (Sciaenops ocellatus); black drum (Pogonias cromis); sheepshead (Archosargus probatocephalus); common snook (Centropomus undecimalis); spotted seatrout (Cynoscion nebulosus); bull shark (Carcharhinus leucas); and crevalle jack (Caranx hippos). A total of 403 tagged fish were recaptured during the study period, including 65 individuals that emigrated from the NTZ and 16 individuals that immigrated into the NTZ from surrounding waters of the lagoon. Migration distances between the original tagging location and the sites where emigrating fish were recaptured were from 0 to 150 km, and these migration distances appeared to be influenced by the proximity of the NTZ to spawning areas or other habitats that are important to specific life-history stages of individual species. Fish that immigrated into the NTZ moved distances ranging from approximately 10 to 75 km. Recapture rates for sportfish species that migrated across the NTZ boundary suggested that more individuals may move into the protected habitats than move out. These data demonstrated that although this estuarine no-take reserve can protect species from fishing, it may also serve to extract exploitable individuals from surrounding fisheries; therefore, if the no-take reserve does function to replenish surrounding fisheries, then increased egg production and larval export may be more important mechanisms of replenishment than the spillover of excess adults from the reserve into fishable areas.

Elemental signatures in otoliths of larval walleye pollock (Theragra chalcogramma) from the northeast Pacific Ocean

The population structure of walleye pollock (Theragra chalcogramma) in the northeastern Pacific Ocean remains unknown. We examined elemental signatures in the otoliths of larval and juvenile pollock from locations in the Bering Sea and Gulf of Alaska to determine if there were significant geographic variations in otolith composition that may be used as natural tags of population affinities. Otoliths were assayed by using both electron probe microanalysis (EPMA) and laser ablation inductively coupled plasma mass spectrometry (ICP-MS). Elements measured at the nucleus of otoliths by EPMA and laser ablation ICP-MS differed significantly among locations. However, geographic groupings identified by a multivariate statistical approach from EPMA and ICP-MS were dissimilar, indicating that the elements assayed by each technique were controlled by separate depositional processes within the endolymph. Elemental profiles across the pollock otoliths were generally consistent at distances up to 100 μm from the nucleus. At distances beyond 100 μm, profiles varied significantly but were remarkably consistent among individuals collected at each location. These data may indicate that larvae from various spawning locations are encountering water masses with differing physicochemical properties through their larval lives, and at approximately the same time. Although our results are promising, we require a better understanding of the mechanisms controlling otolith chemistry before it will be possible to reconstruct dispersal pathways of larval pollock based on probe-based analyses of otolith geochemistry. Elemental signatures in otoliths of pollock may allow for the delineation of fine-scale population structure in pollock that has yet to be consistently revealed by using population genetic approaches.

The relative value of different estuarine nursery areas in North Carolina for transient juvenile marine fishes

Offshore winter-spawned fishes dominate the nekton of south-eastern United States estuaries. Their juveniles reside for several months in shallow, soft bottom estuarine creeks and bays called primary nursery areas. Despite similarity in many nursery characteristics, there is, between and within species, variability in the occupation of these habitats. Whether all occupied habitats are equally valuable to individuals of the same species or whether most recruiting juveniles end up in the best habitats is not known. If nursery quality varies, then factors controlling variation in pre-settlement fish distribution are important to year-class success. If nursery areas have similar values, interannual variation in distribution across nursery creeks should have less effect on population sizes or production. I used early nursery period age-specific growth and mortality rates of spot (Leiostomus xanthurus) and Atlantic croaker (Micropogonias undulatus)—two dominant estuarine fishes—to assess relative habitat quality across a wide variety of nursery conditions, assuming that fish growth and mortality rates were direct reflections of overall physical and biological conditions in the nurseries. I tested the hypothesis that habitat quality varies for these fishes by comparing growth and mortality rates and distribution patterns across a wide range of typical nursery habitats at extreme ends of two systems. Juvenile spot and Atlantic croaker were collected from 10 creeks in the Cape Fear River estuary and from 18 creeks in the Pamlico Sound system, North Carolina, during the 1987 recruitment season (mid-March–mid-June). Sampled creeks were similar in size, depth, and substrates but varied in salinities, tidal regimes, and distances from inlets. Spot was widely distributed among all the estuarine creeks, but was least abundant in the creeks in middle reaches of both systems. Atlantic croaker occurred in the greatest abundance in oligohaline creeks of both systems. Instantaneous growth rates derived from daily otolith ages were generally similar for all creeks and for both species, except that spot exhibited a short-term growth depression in the upriver Pamlico system creeks—perhaps the result of the long migration distance of this species to this area. Spot and Atlantic croaker from upriver oligohaline creeks exhibited lower mortality rates than fish from downstream polyhaline creeks. These results indicated that even though growth was similar at the ends of the estuaries, the upstream habitats provided conditions that may optimize fitness through improved survival.

Genetic analysis of juvenile coho salmon (Oncorhynchus kisutch) off Oregon and Washington reveals few Columbia River wild fish

Little is known about the ocean distributions of wild juvenile coho salmon off the Oregon-Washington coast. In this study we report tag recoveries and genetic mixed-stock estimates of juvenile fish caught in coastal waters near the Columbia River plume. To support the genetic estimates, we report an allozyme-frequency baseline for 89 wild and hatchery-reared coho salmon spawning populations, extending from northern California to southern British Columbia. The products of 59 allozyme-encoding loci were examined with starch-gel electrophoresis. Of these, 56 loci were polymorphic, and 29 loci had P0.95 levels of polymorphism. Average heterozygosities within populations ranged from 0.021 to 0.046 and averaged 0.033. Multidimensional scaling of chord genetic distances between samples resolved nine regional groups that were sufficiently distinct for genetic mixed-stock analysis. About 2.9% of the total gene diversity was due to differences among populations within these regions, and 2.6% was due to differences among the nine regions. This allele-frequency data base was used to estimate the stock proportions of 730 juvenile coho salmon in offshore samples collected from central Oregon to northern Washington in June and September-October 1998−2000. Genetic mixed-stock analysis, together with recoveries of tagged or fin-clipped fish, indicates that about one half of the juveniles came from Columbia River hatcheries. Only 22% of the ocean-caught juveniles were wild fish, originating largely from coastal Oregon and Washington rivers (about 20%). Unlike previous studies of tagged juveniles, both tag recoveries and genetic estimates indicate the presence of fish from British Columbia and Puget Sound in southern waters. The most salient feature of genetic mixed stock estimates was the paucity of wild juveniles from natural populations in the Columbia River Basin. This result reflects the large decrease in the abundances of these populations in the last few decades.

Movement of American lobster (Homarus americanus) in the southwestern Gulf of St. Lawrence

A total of 42,445 American lobsters (Homarus americanus) were tagged in thirty-one sites throughout the southwestern Gulf of St. Lawrence between 1980 and 1997. Results from the recapture of 8503 tagged lobsters showed small distances traveled between the release and the recapture position for animals ranging in size from 51 to 152 mm carapace length. The average distance traveled ranged from 2 km in parts of Baie des Chaleurs and western Cape Breton to 19 km in central Northumberland Strait. Lobsters moved generally along the shore (93% of the dispersion was in areas between the shore and the 20-m bathymetric contour). As a result, lobsters traveled longer distances in sites characterized by a gradually sloping bottom where the distance between the shore and the 20-m contour line was extensive in contrast to areas characterized by rapidly changing depths and by a relatively small amount of habitat shallower than 20 m. In the majority of sites (14 of 19) there was no significant difference between males and females in the average distance they traveled. In four of the five sites females moved farther than males. In general, the average distance traveled by berried females was shorter than that traveled by males or nonberried females. No relationship was observed between the distance traveled and the size of the animal. There was no strong evidence of a relationship between the average distance traveled and the number of days at liberty. In general, lobsters in the southwestern Gulf of St. Lawrence traveled short distances and dispersion was restricted to the nearshore habitat. Further, the distance traveled was not correlated to size, sex, or years at large. These findings show that there is little interaction between American lobsters from different fishing areas at the benthic level and that American lobster movements should have minimal consequences for management of the species in the southwestern Gulf of St. Lawrence.

Investigation of anti-lock braking strategies for heavy goods vehicles

An articulated lorry was instrumented in order to measure its performance in straight-line braking. The trailer was fitted with two interchangeable tandem axle sub-chassis, one with an air suspension and the other with a steel monoleaf four-spring suspension. The brakes were only applied to the trailer axles, which were fitted with anti-lock braking systems (ABS), with the brake torque controlled in response to anticipated locking of the leading axle of the tandem. The vehicle with the air suspension was observed to have significantly better braking performance than the steel suspension, and to generate smaller inter-axle load transfer and smaller vertical dynamic tyre forces. Computer models of the two suspensions were developed, including their brakes and anti-lock systems. The models were found to reproduce most of the important features of the experimental results. It was concluded that the poor braking performance of the steel four-spring suspension was mainly due to interaction between the ABS and inter-axle load transfer effects. The effect of road roughness was investigated and it was found that vehicle stopping distances can increase significantly with increasing road roughness. Two alternative anti-lock braking control strategies were simulated. It was found that independent sensing and actuation of the ABS system on each wheel greatly reduced the difference in stopping distances between the air and steel suspensions. A control strategy based on limiting wheel slip was least susceptible to the effects of road roughness.

Use of allozyme markers to determine the genetic structure of hatchery population of Thai pangas, Pangasius hypophthalmus of Jessore, Bangladesh

Genetic structure of hatchery population of Thai pangas (Pangasius hypophthalmus) of Jessore region, Bangladesh has been investigated from 1 January 2004 to 31 December 2004. Samples for this study were collected from five fish hatcheries viz. Asrom, Banchte Shekha, Chowdhury, Maola and Rezaul Haque. The enzymes were encoded by 15 gene loci: Adh-1*, Est-1*, G3pdh-2*, Gpi-1*, Gpi-2*, Idhp-1*, Idhp-2*, Ldh-1*, Ldh-2*, Mdh-1*, Mdh-2*, Pgm*, Sdh-1*, Sdh-2* and Sod*. Among them four (Est-1*, G3pdh-2*, Gpi-2*and Pgm*) were found to be polymorphic in different populations but only Gpi-2* was polymorphic in all the sampled populations. The mean proportion of polymorphic loci per population was the highest (26.7%) in Banchte Shekha hatchery while the mean proportion of heterozygous loci was 13.33% per individual in Banchte Shekha and Maola hatcheries. The UPGMA dendrogram of Nei's (1972) genetic distances indicated a relationship between the genetic distance and geographical difference. High genetic variability in stocks of Thai pangas was observed in the Banchte Shekha and Maola hatcheries and less variability was found in the other three hatcheries.

Allozyme and morphological variation in four hatchery stocks of Thai pangas, Pangasius hypophthalmus in Mymensingh, Bangladesh

Genetic and morphological characters of four hatchery population (Shambhuganj, Brahmaputra, Anudan and Bhai-Bhai) of Thai pangas, Pangasius hypophthalmus in Mymensingh region of Bangladesh was studied using morphological characters and allozyme markers from 29 November 2001 to 29 November 2002. A total of 14 morphometric and 6 meristic characters were verified, among which 3 morphometric (BDA, PELFL and HW) and 2 meristic characters (AFR, CFR) of Anudan hatchery population were found to be significantly higher (p>0.001) than those of the other three hatchery populations. Brahmaputra hatchery population was also significantly higher in two meristic characters (PCFR and CFR). For allozyme electrophoresis nine enzyme markers were used viz.: Esr-1*, G3pdh-2*, Gpi-1*, Gpi-2*, Ldh-1*, Ldh-2*, Mdh-1*, Mdh-2* and Pgm* where three loci (Esr-1*, Gpi-2* and Pgm*) were polymorphic (p>0.95) in Anudan and Brahmaputra hatchery populations. The mean proportion of polymorphic loci per population was higher (33.3%) in Brahmaputra and Anudan hatchery populations. Also the expected heterozygosity levels were 0.149 and 0.177 in Brahmaputra and Anudan hatchery populations, respectively. Based on Nei's (1972) genetic distances, the UPGMA dendrogram grouped the populations into two clusters. The Brahmaputra and Anudan populations are in one group; Shambhuganj, and Bhai-Bhai populations are in the second group. High genetic variation in Thai pangas was observed in the Brahmaputra and Anudan hatchery populations and less variation in the other two hatchery populations.

An experimental model of relay deployment planning tool for a wireless sensor network system to monitor civil engineering structures

It is essential to monitor deteriorated civil engineering structures cautiously to detect symptoms of their serious disruptions. A wireless sensor network can be an effective system for monitoring civil engineering structures. It is fast to deploy sensors especially in difficult-to-access areas, and it is extendable without any cable extensions. Since our target is to monitor deteriorations of civil engineering structures such as cracks at tunnel linings, most of the locations of sensors are known, and sensors are not required to move dynamically. Therefore, we focus on developing a deployment plan of a static network in order to reduce the value of a cost function such as initial installation cost and summation of communication distances of the network. The key issue of the deployment is the location of relays that forward sensing data from sensors to a data collection device called a gateway. In this paper, we propose a relay deployment-planning tool that can be used to design a wireless sensor network for monitoring civil engineering structures. For the planning tool, we formalize the model and implement a local search based algorithm to find a quasi-optimal solution. Our solution guarantees two routings from a sensor to a gateway, which can provide higher reliability of the network. We also show the application of our experimental tool to the actual environment in the London Underground.

Geometrical properties and turbulent flame speed measurements in stationary premixed V-flames using direct numerical simulation

Three dimensional, fully compressible direct numerical simulations (DNS) of premixed turbulent flames are carried out in a V-flame configuration. The governing equations and the numerical implementation are described in detail, including modifications made to the Navier-Stokes Characteristic Boundary Conditions (NSCBC) to accommodate the steep transverse velocity and composition gradients generated when the flame crosses the boundary. Three cases, at turbulence intensities, u′/sL, of 1, 2, and 6 are considered. The influence of the flame holder on downstream flame properties is assessed through the distributions of the surface-conditioned displacement speed, curvature and tangential strain rates, and compared to data from similarly processed planar flames. The distributions are found to be indistinguishable from planar flames for distances greater than about 17δth downstream of the flame holder, where δth is the laminar flame thermal thickness. Favre mean fields are constructed, and the growth of the mean flame brush is found to be well described by simple Taylor type diffusion. The turbulent flame speed, sT is evaluated from an expression describing the propagation speed of an isosurface of the mean reaction progress variable c̃ in terms of the imbalance between the mean reactive, diffusive, and turbulent fluxes within the flame brush. The results are compared to the consumption speed, sC, calculated from the integral of the mean reaction rate, and to the predictions of a recently developed flame speed model (Kolla et al., Combust Sci Technol 181(3):518-535, 2009). The model predictions are improved in all cases by including the effects of mean molecular diffusion, and the overall agreement is good for the higher turbulence intensity cases once the tangential convective flux of c̃ is taken into account. © 2010 Springer Science+Business Media B.V.