Investigations into the extraction and the determination of polycyclic aromatic hydrocarbons (PAHs) from water by solid-phase extraction and capillary gas chromatography/ mass spectrometry

Factors affecting the detennination of PAHs by capillary GC/MS were studied. The effect of the initial column temperature and the injection solvent on the peak areas and heights of sixteen PAHs, considered as priority pollutants, USillg crosslinked methyl silicone (DB!) and 5% diphenyl, 94% dimethyl, 1% vinyl polysiloxane (DBS) columns was examined. The possibility of using high boiling point alcohols especially butanol, pentanol, cyclopentanol, and hexanol as injection solvents was investigated. Studies were carried out to optimize the initial column temperature for each of the alcohols. It was found that the optimum initial column temperature is dependent on the solvent employed. The peak areas and heights of the PAHs are enhanced when the initial column temperature is 10-20 c above the boiling point of the solvent using DB5 column, and the same or 10 C above the boiling point of the solvent using DB1 column. Comparing the peak signals of the PAHs using the alcohols, p-xylene, n-octane, and nonane as injection solvents, hexanol gave the greatest peak areas and heights of the PAHs particularly the late-eluted peaks. The detection limits were at low pg levels, ranging from 6.0 pg for fluorene t9 83.6 pg for benzo(a)pyrene. The effect of the initial column temperature on the peak shape and the separation efficiency of the PARs was also studied using DB1 and DB5 columns. Fronting or splitting of the peaks was obseIVed at very low initial column temperature. When high initial column temperature was used, tailing of the peaks appeared. Great difference between DB! and.DB5 columns in the range of the initial column temperature in which symmetrical.peaks of PAHs can be obtained is observed. Wider ranges were shown using DB5 column. Resolution of the closely-eluted PAHs was also affected by the initial column temperature depending on the stationary phase employed. In the case of DB5, only the earlyeluted PAHs were affected; whereas, with DB1, all PAHs were affected. An analytical procedure utilizing solid phase extraction with bonded phase silica (C8) cartridges combined with GC/MS was developed to analyze PAHs in water as an alternative method to those based on the extraction with organic solvent. This simple procedure involved passing a 50 ml of spiked water sample through C8 bonded phase silica cartridges at 10 ml/min, dried by passing a gentle flow of nitrogen at 20 ml/min for 30 sec, and eluting the trapped PAHs with 500 Jll of p-xylene at 0.3 ml/min. The recoveries of PAHs were greater than 80%, with less than 10% relative standard deviations of nine determinations. No major contaminants were present that could interfere with the recognition of PAHs. It was also found that these bonded phase silica cartridges can be re-used for the extraction of PAHs from water.

Study of the application of the high performance liquid chromatography-particle beam interface-mass spectrometry technique on some pesiticides and the reduction phenomena in the system

This work includes two major parts. The first part of the work concentrated on the studies of the application of the highperfonnance liquid chromatography-particle beam interface-mass spectrometry system of some pesticides. Factors that have effects on the detection sensitivity were studied. The linearity ranges and detection limits of ten pesticides are also given in this work. The second part of the work concentrated on the studies of the reduction phenomena of nitro compounds in the HPLC-PB-MS system. Direct probe mass spectrometry and gas chromatography-mass spectrometry techniques were also used in the work. Factors that have effects on the reduction of the nitro compounds were studied, and the possible explanation is proposed. The final part of this work included the studies of reduction behavior of some other compounds in the HPLC-PB-MS system, included in them are: quinones, sulfoxides, and sulfones.

The determination of the helium discharge detector response to fixed gases

The Beckman Helium Discharge Detector has been found to be sensitive to the fixed gases oxygen, nitrogen, and hydrogen at detection levels 10-100 times more sensitive than possible with a Bow-Mac Thermal Conductivity Detector. Detection levels o~ approximately 1.9 E-4 ~ v/v oxygen, 3.1 E-4 ~ v/v nitrogen, and 3.0 E-3 ~ v/v hydrogen are estimated. Response of the Helium Discharge Detector was not linear, but is useable for quantitation over limited ranges of concentration using suitably prepared working standards. Cleanliness of the detector discharge electrodes and purity of the helium carrier and discharge gas were found to be critical to the operation of the detector. Higher sensitivities of the Helium Discharge Detector may be possible by the design and installation of a sensitive, solid-state electrometer.

Investigations into the determination of polycyclic aromatic hydrocarbons (PAHs) and polychlorinated biphenyls (PCBs) by capillary gas chromatography

Factors involved in the determination of PAHs (16 priority PAHs as an example) and PCBs (10 PCB congeners, representing 10 isomeric groups) by capillary gas chromatography coupled with mass spectrometry (GC/MS, for PAHs) and electron capture detection (GC/ECD , for PCBs) were studied, with emphasis on the effect of solvent. Having various volatilities and different polarities, solvent studied included dichloromethane, acetonitrile, hexan e, cyclohexane, isooctane, octane, nonane, dodecane, benzene, toluene, p-xylene, o-xylene, and mesitylene. Temperatures of the capillary column, the injection port, the GC/MS interface, the flow rates of carrier gas and make-up gas, and the injection volume were optimized by one factor at a time method or simplex optimization method. Under the optimized conditions, both peak height and peak area of 16 PAHs, especially the late-eluting PAHs, were significantly enhanced (1 to 500 times) by using relatively higher boiling point solvents such as p-xylene and nonane, compared with commonly used solvents like benzene and isooctane. With the improved sensitivity, detection limits of between 4.4 pg for naphthalene and 30.8 pg for benzo[g,h,i]perylene were obtained when p-xylene was used as an injection solvent. Effect of solvent on peak shape and peak intensity were found to be greatly dependent on temperature parameters, especially the initial temperature of the capillary column. The relationship between initial temperature and shape of peaks from 16 PAHs and 10 PCBs were studied and compared when toluene, p-xylene, isooctane, and nonane were used as injection solvents. If a too low initial temperature was used, fronting or split of peaks was observed. On the other hand, peak tailing occurred at a too high initial column temperature. The optimum initial temperature, at which both peak fronting and tailing were avoided and symmetrical peaks were obtained, depended on both solvents and the stationary phase of the column used. On a methyl silicone column, the alkane solvents provided wider optimum ranges of initial temperature than aromatic solvents did, for achieving well-shaped symmetrical GC peaks. On a 5% diphenyl: 1% vinyl: 94% dimethyl polysiloxane column, when the aromatic solvents were used, the optimum initial temperature ranges for solutes to form symmetrical peaks were improved to a similar degree as those when the alkanes were used as injection solvents. A mechanism, based on the properties of and possible interactions among the analyte, the injection solvent, and the stationary phase of the capillary column, was proposed to explain these observations. The effect of initial temperature on peak height and peak area of the 16 PAHs and the 10 PCBs was also studied. The optimum initial temperature was found to be dependent on the physical properties of the solvent used and the amount of the solvent injected. Generally, from the boiling point of the solvent to 10 0C above its boiling point was an optimum range of initial temperature at which cthe highest peak height and peak area were obtained.

Bacteriophages of Erwinia amylovora and their potential use in biological control

Forty-four bacteriophage isolates of Erwinia amy/ovora, the causal agent of fire blight, were collected from sites in and around the Niagara Region of Southern Ontario in the summer of 1998. Phages were isolated only from sites where fire blight was present. Thirty-seven of these phages were isolated from the soil surrounding infected trees, with the remainder isolated from aerial plant tissue samples. A mixture of six E. amy/ovora bacterial host strains was used to enrich field samples in order to avoid the selection bias of a single-host system. Molecular characterization of the phages with a combination of peR and restriction endonuclease digestions showed that six distinct phage types were isolated. Ten phage isolates related to the previously characterized E. amy/ovora phage PEa1 were isolated, with some divergence of molecular markers between phages isolated from different sites. The host ranges of the phages revealed that certain types were unable to efficiently lyse some E. amy/ovora strains, and that some types were able to lyse the epiphytic bacterium Pantoea agg/omerans. Biological control of E. amy/ovora by the bacteriophages was assessed in a bioassay using discs of immature pear fruit. Twenty-three phage isolates were able to significantly suppress the incidence of bacterial exudate on the pear disc surface. Quantification of the bacterial population remaining on the disc surface indicated that population reductions of up to 97% were obtainable by phage treatment, but that elimination of bacteria from the surface was not possible with this model system.

William Hand Manufacturer of Fire-works, Pyrotechnic Artist Advertisement

An advertisement addressed to the "celebration committees" for May 24th and July 1st. William Hand details his services for fireworks and other lighting. Price ranges are included and reviews/comments quoted from several newspapers.

General regulations and orders, 1804

Bound with: The manual and platoon exercises, &c., &c. (51 p.) and: General orders and observations on the movement and field exercise of infantry (16 p.) Inscribed on front paste-down: L. Colonel Brock. Also inscribed: Maj. Genl T.A. Smith late of the 1st. Rifle Regt. Bookplate of Robert B. Taylor, Norfolk. On front flyleaf: lengthy, two-page transcription in ink, headed /Copy/Circular/ dated "Horse Guards, 25th May '07" and signed: "Harry Calvert Adjt. General.

General regulations and orders, 1804

Bound with: The manual and platoon exercises, &c., &c. (51 p.) and: General orders and observations on the movement and field exercise of infantry (16 p.) Inscribed on front paste-down: L. Colonel Brock. Also inscribed: Maj. Genl T.A. Smith late of the 1st. Rifle Regt. Bookplate of Robert B. Taylor, Norfolk. On front flyleaf: lengthy, two-page transcription in ink, headed /Copy/Circular/ dated "Horse Guards, 25th May '07" and signed: "Harry Calvert Adjt. General.

Physical Activity and the Entanglement of Meaning Making for Females

This research takes a phenomenological approach through narratives to investigate the meanings females attribute to their experiences with physical activity. Nine females across the age ranges of 10-80 were asked to share three meaningful physical activity stories. These experiences could be positive or negative in nature as long as they were reflective of a meaningful experience for the participant. The aim of the research was to explore the types of physical activity experiences that females find meaningful. The results indicate that participants perceived the following to be meaningful within their experience: social support, benefits to personal health and well-being, recognition and acknowledgment, empowerment, body control, early positive experience and identity formation. Participants’ stories offered an enlightened understanding of the meanings active females associate with physical activity across their lifespans that perhaps can assist in formulating and developing strategies to encourage and promote involvement in physical activity.

Broadside reporting the Fenian Invasion of Canada, June 2, 1866

The Fenians were a group intent on securing Irish independence from England. The movement had its origins in Ireland in1857, under the leadership of James Stephens, with the assistance of John O'Mahony, an American who had raised funds for the cause. The American branch of this movement was especially successful, having raised $500 000 and enlisting about 10 000 American Civil War veterans. The group split into two separate factions, one desiring an invasion of Canada and the other preferring an uprising in Ireland. It soon became apparent that an uprising in Ireland was not imminent, and a decision was made to invade Canada. In April, 1866, a raid was launched against New Brunswick. It proved unsuccessful, and another raid was attempted on June 1, 1866, this time in Ridgeway, near Fort Erie, Ontario. The Canadian militiamen were defeated, but the Fenians subsequently withdrew. A third incident occurred on June 7, this time at Missisquoi Bay in Quebec, when the Fenians crossed the border, remained there for 2 days, and withdrew. A failed uprising in Ireland in 1867 signaled the demise of the movement. The Fenian threat helped to promote a sense of union among Canadians and provided an incentive for Confederation.

Letter - Lieut A. Watson Sime to Col. F.C. McCordick

A letter from Lieut. A. Watson to Col. F.C. McCordick dated only July 3rd. The letter reads "My dear Col. McCordick, If you haven't already heard, you will be surprised to get this letter from me - in Germany. It happened at that awful slaughter - the 3rd battle of Ypres, & even now when I think of it all, I doubt my reality of existence. Everything was O.K at 730am on the 2nd - a little morning hate in the way of trench mortars, that was all. I had just visited a few of my guns & had passed Gen.s Mercer & Williams & their aides, Lyman Gooderham and Fraser (two latter at this camp) on the way to the -- C.M.R Bn. Head Quarters when the storm broke. It last for 5 hours & by the time the Germans came over there were few left to oppose them. By a miracle, the 15 yard bay of the front line, where I was with 6 others, was not levelled like all the rest of the line & we did our best with rifle & bomb. I got a crack on the head & 3 hours later I found myself in a waterfilled shell hole. By night I tried to crawl back & through, but at dawn was caught. Am very comfortable here & glad to have company of Col. Usher, Capt. Light Bourne, Capt. Frank Park M.O. -- CMR) & about 20 other Canadians. Hope all is well with you & 35 - Good luck & best regards to all. A. Watson Sime, Lieut. Haus 62-B OFFIZIER-KRIEGSGEFANGENLAGER Gutersloh.

Broadside reporting the Fenian Invasion of Canada, June 2, 1866

The Fenians were a group intent on securing Irish independence from England. The movement had its origins in Ireland in1857, under the leadership of James Stephens, with the assistance of John O'Mahony, an American who had raised funds for the cause. The American branch of this movement was especially successful, having raised $500 000 and enlisting about 10 000 American Civil War veterans. The group split into two separate factions, one desiring an invasion of Canada and the other preferring an uprising in Ireland. It soon became apparent that an uprising in Ireland was not imminent, and a decision was made to invade Canada. In April, 1866, a raid was launched against New Brunswick. It proved unsuccessful, and another raid was attempted on June 1, 1866, this time in Ridgeway, near Fort Erie, Ontario. The Canadian militiamen were defeated, but the Fenians subsequently withdrew. A third incident occurred on June 7, this time at Missisquoi Bay in Quebec, when the Fenians crossed the border, remained there for 2 days, and withdrew. A failed uprising in Ireland in 1867 signaled the demise of the movement. The Fenian threat helped to promote a sense of union among Canadians and provided an incentive for Confederation.

HG 249.40-249.55 Thin Section

Coarse grained sample with clasts ranging from small to medium. Clast shape ranges from angular to sub-angular. Lineations and rotation structures seen. Clay material and fine grained domains (darker colour) also seen.

HG 257.55-257.75 Thin Section

Dark brown sediment with clasts that range from small to large. The clast shape ranges from sub-angular to sub-rounded. Lineations are abundant in this sample. Edge-to-edge grain crushing can also be seen. Darker organic rich domains are also present throughout the sample.

HG 264.30-264.45

Coarse grained sample with clasts that range from small to large in size. The clast shape ranges from angular to rounded, and many grains are fractured. Grain crushing is present in large amounts. This includes edge-to-edge crushing as well as grains that are crushed into one another. Rotation structures are also common among the clasts that are sub-rounded to rounded. Areas of finer sediment can also be seen.