Economic feasibility of composite fish culture in leased-in village tanks of Kanyakumari district: an invesment analysis

Kanyakumari district belonging to the high rainfall zone has resource advantages for composite fish culture in the leased-in village tanks. There are more than 400 fish farmers operating in leased-in tanks following composite fish culture under the FFDA programme. To estimate the economic feasibility and financial viability of the enterprise, the present study was taken up. 38 fish farmers selected from the district provided the necessary information like capital investment, costs and return and constraints. The data collected were analysed and a farm nearest to the average farm situation was taken as the representative farm. Investment criteria like PayBack Period (PBP), Simple Rate of Returns (SRR), Net Present Value (NPV) and Benefit Cost Ratio (BCR) were estimated taking into account a period of 10 years, the period for which the village tanks are leased-out to fish farmers under the FFDA programme. The analysis indicated the profitability of composite fish culture in village tanks in the district and the results are discussed with recommendations.

The design, development, and manufacture of large wood/composite wind turbine rotors

Discusses a study conducted to determine the best development path for large wind turbine rotor design. Shape and number of blades, degrees of freedom allowed, and control strategy are considered. Manufacture and costs are also discussed. Two-bladed, stall-regulated, teetered rotors are more cost effective than three-bladed rotors. Single-bladed rotors can be even more cost-effective. No new manufacturing techniques are required. The most cost-effective rotor includes a hub constructed in wood/composite materials, bonded to the blades. There is strong incentive for the blade manufacturer to supply the complete rotor. (from author's abstract)

Bistable composite slit tubes. I. A beam model

Composite slit tubes with a circular cross-section show an interesting variety in their large-deformation behaviour, that depends on the layup of the surface that is used: tubes made from many antisymmetric laminae are bistable, and have a compact coiled configuration, tubes made from similar, but symmetric, laminae do not have a compact coiled state, and indeed may not be bistable, while tubes made from an isotropic sheet are not bistable. A simple model is presented here that is able to distinguish between these behaviours; it assumes that the cross-section remains circular, but allows twist, which is shown to be the key to making the distinction between the behaviours described. © 2004 Elsevier Ltd. All rights reserved.

Scaling POMDPs for dialog management with composite summary point-based value iteration (CSPBVI)

Although partially observable Markov decision processes (POMDPs) have shown great promise as a framework for dialog management in spoken dialog systems, important scalability issues remain. This paper tackles the problem of scaling slot-filling POMDP-based dialog managers to many slots with a novel technique called composite point-based value iteration (CSPBVI). CSPBVI creates a "local" POMDP policy for each slot; at runtime, each slot nominates an action and a heuristic chooses which action to take. Experiments in dialog simulation show that CSPBVI successfully scales POMDP-based dialog managers without compromising performance gains over baseline techniques and preserving robustness to errors in user model estimation. Copyright © 2006, American Association for Artificial Intelligence (www.aaai.org). All rights reserved.

The elastic-plastic indentation response of a columnar thermal barrier coating

Thermal barrier coatings with a columnar microstructure are prone to erosion damage by a mechanism of surface cracking upon impact by small foreign particles. In order to explore this erosion mechanism, the elastic indentation and the elastic-plastic indentation responses of a columnar thermal barrier coating to a spherical indenter were determined by the finite element method and by analytical models. It was shown that the indentation response is intermediate between that of a homogeneous half-space and that given by an elastic-plastic mattress model (with the columns behaving as independent non-linear springs). The sensitivity of the indentation behaviour to geometry and to the material parameters was explored: the diameter of the columns, the gap width between columns, the coefficient of Coulomb friction between columns and the layer height of the thermal barrier coating. The calculations revealed that the level of induced tensile stress is sufficient to lead to cracking of the columns at a depth of about the column radius. It was also demonstrated that the underlying soft bond coat can undergo plastic indentation when the coating comprises parallel columns, but this is less likely for the more realistic case of a random arrangement of tapered columns. © 2009 Elsevier B.V.

Characterization of nano-composite M-2411/Y-123 thin films by electron backscatter diffraction and in-field critical current measurements

Thin films of nano-composite Y-Ba-Cu-O (YBCO) superconductors containing nano-sized, non-superconducting particles of Y2Ba 4CuMOx (M-2411 with M = Ag and Nb) have been prepared by the PLD technique. Electron backscatter diffraction (EBSD) has been used to analyze the crystallographic orientation of nano-particles embedded in the film microstructure. The superconducting YBa2Cu3O7 (Y-123) phase matrix is textured with a dominant (001) orientation for all samples, whereas the M-2411 phase exhibits a random orientation. Angular critical current measurements at various temperature (T) and applied magnetic field (B) have been performed on thin films containing different concentration of the M-2411 second phase. An increase in critical current density J c at T < 77 K and B < 6 T is observed for samples with low concentration of the second phase (2 mol % M-2411). Films containing 5 mol % Ag-2411 exhibit lower Jc than pure Y-123 thin films at all fields and temperatures. Samples with 5 mol % Nb-2411 show higher Jc(B) than phase pure Y-123 thin films for T < 77 K. © 2010 IOP Publishing Ltd.

Monoculture of three native air breathing fishes in homestead ditches and plastic barrels

Six on-farm trials were conducted from 1 August to 23 November 2004 in two different environments such as homestead ditches (10 to 17 square meters) and plastic barrels (240 liters) to develop techniques for nonoculture [sic] of climbing perch, Anabas testudineus, stinging catfish, Heteropneustes fossilis and walking catfish, Clarias batrachus for poor and landless people who have no access to pond. Stocking density for ditch was 10 fry/square meter while that for barrel was 20 fry/cubic meter. The fishes were fed with 3-test diets viz. low-cost formulated feed (rice bran 20%, wheat meal 10%, mustered [sic] oil cake 35%, poultry offal 35%), live foods (chopped snails and clams), and a commercial feed (Saudi-Bangla feed, starter 3: first month and grower-1: subsequent two months) and designated as T1, T2 and T3, respectively. Feeding rate was the same in all the treatments viz. 10% of body weight (first two months), 8% (third month) and 6% (fourth month). T1 and T2 had three replications while T3 had two replications. Water temperature was recorded weekly while fish growth was monitored monthly. After 4 months' rearing, H. fossilis and C. batrachus in ditches and barrels attained higher average weight in T2 followed by T3 and T1 while A. testudineus in barrels also attained higher average weight in T2. The variation in net weight gain by A. testudineus in ditch fed test diets T2 and T3 was not significantly different (P>0.05) though the net gain in both T2 and T3 was significantly (P<0.05) higher than that of T1. The yield of climbing perch as obtained from T1, T2 and T3 was 988, 1136 and 1185 kg/ha, respectively while that stinging catfish was 395, 242 and 444 kg/ha and walking catfish was 1605, 2,099 and 1,654 kg/ha respectively. All the three species showed significantly lower growth rate in barrels than in ditches.

Amorphous silicon display backplanes on plastic substrates

Amorphous silicon thin-film transistors and pixel driver circuits for organic light-emitting diode displays have been fabricated on plastic substrates. Pixel circuits demonstrate sufficient current delivery and long-term stable operation. © 2005 IEEE.

Frozen storage studies of composite fish mince drom dhooma (Sciaenid sp.) and lactarius (Lactarius lactarius)

Fish minces from dhoma and lactarius were mixed in the ratio of 40:60 respectively, and quick frozen along with individual minces at -40°C and stored at -20°C. Shelf life was evaluated by following biochemical, physical and organoleptic changes occurred during storage up to 44 weeks. Rapid decreases were noted in water soluble nitrogen and salt soluble nitrogen fractions during the initial period of 16 weeks. A good correlation was observed between changes in salt-soluble nitrogen and organoleptic evaluation. The minces were in good and acceptable condition up to 32 weeks of storage.