996 resultados para Planta de cobertura


Relevância:

20.00% 20.00%

Publicador:

Resumo:

This work aimed to apply geoprocessing techniques to identify and to quantify the types of vegetal coverings in part of the county Botucatu – SP, having been divided into three phases: acquisition of data; georeferencing based on the digital topographic maps in 1:50000 scale and finally the thematic maps were generated. The methodology used to the analogical aerial photographics georeferencing showed efficient, considering that it was based on scientific procedures of residues analysis and the positioning central was classified as A, according to the Cartographic Precision Pattern.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The aim of this study was to evaluate the influence of fine and medium droplets in the performance of flutriafol and thiophanate methyl + flutriafol for the control of Asian Soybean Rust (Phakopsora pachyrhizi Sydow & Sydow). The experiment was a 2 x 2 factorial design (2 droplet sizes x 2 fungicides) resulting in four treatments with six replications. The experimental area was set up with 24 plots (50 x 21 m). In each plot there was a central assessment area with 10 x 20 m. To the each plot there was a non-treated area placed in opposed direction to the wind. The evaluations of rust control were made by of the calculation of incidence (percentage of plants with rust), severity (level of infection), defoliations and soybean yield. The results were analyzed by the calculation of the confidence interval at 90%. The study was set up in curative control conditions with average infestation of 68.6%, average severity in the lower part of the canopy was of 35.9% and on the upper parte it was 4.57%. The results of severity, defoliation and productivity did not show statistical difference among the treatments. However, it was observed that in general there was tendency of better results with the application of flutriafol alone comparing with thiophanate methyl + flutriafol, since there was a small difference between two commercial products in the flutriafol active ingredient content (62.5 g ha-1 to the flutriafol alone and 60 g ha-1 to the thiophanate methyl + flutriafol). There was no statistical difference between fine and medium droplets. This fact can be explained by the characteristics of systemic action of the flutriafol and by the type of control made (curative). The flutriafol, being a systemic fungicide is less sensitive to the better coverage provided by the smaller droplets and, on the curative control, the amount of product deposited can became more import than coverage, mainly on the superior part of the leaves. These leaves are healthier than the inferior leaves that in general are the first to become completely compromised by the rust, losing importance to the plant. By this reason, medium droplets appear to have offered similar performance even not offering advantages in the leaf coverage. This fact may become important because in the practical side of the use of medium droplets, since this may increase the amount of time to spray, mainly because the fine and very fine droplets have more limitations related to drift and evaporation.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The quality and efficiency in straw cutting are determinants in the sowing process, according to the occurrence of "tamp" and stops, the magnitude of the straw removal or even the known effects of the seed "envelopment" where the cutting mechanism can not cut the remaining straw. Thus, the objective of this study was to evaluate the performance of different mechanisms for straw cutting of a seeder individualized in different amounts of crop coverage artificially added in a clay soil. The experiment was conducted at Unesp – Sao Paulo State University in the Experimental Farm Lageado, belonging to the College of Agricultural Sciences - Unesp, Botucatu. The experimental design was split plot with four replications, with main plots consisting of five quantities of black oat straw, in area with no-tillage system and subplots of three opening furrows mechanisms, which are: plane disk (PD), corrugated disk (CD) and wavy disk (WD). The wavy disk provided greater rolling resistance, reducing the speed of the set (tractor and equipment). The plane cutting disk showed the highest values of mobilized soil area, deeper penetration into the soil, requiring lower values of vertical force and higher values of lateral force. Regarding the type of waste and doses used, they offered no resistance to cutting and there was no change in the horizontal force on straw.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Increasing out-of-season corn productivity is possible by the application of nitrogen fertilizers even when in succession to soybean. On the other hand, information concerning the best sources of nitrogen and ways of splitting the doses to be applied is still scarce. Having that in mind, an experiment was carried out viewing to evaluate the effects of sources of nitrogen and ways of splitting doses of those N fertilizers on out-of-season corn sown in succession to soybean cultivated in a no-tillage system. The experiment took place in Chapadão do Céu, state of Goiás, Brasil (latitude of 18°35’42’’ South, longitude of 52°47’59’’ West and mean altitude above sea level of 802 m) in an Acrutox. The experimental units were distributed in the field in accordance with a randomized complete block design, in a factorial scheme 3 X 5 + 1, with four replications. Three were the sources of N: urea, urea extruded with starch (Amireia®) and ammonium sulfonitrate with a nitrification inhibitor (Entec®) and five the ways of splitting the nitrogen dose : 90-0, 60-30, 45-45, 30-60, and 0-90 in which the first fraction was applied at sowing and the second in side dressing. In addition to those, there was a check treatment, without N. All plots received, at sowing, 12 kg ha-1 of N by the mixture NPK. The ways of splitting the N dose and the sources of N had no significant effect on the levels of N and S in the leaves, first ear height, the final plant population, the number of ears per plant, and the number of grains per ear. N in the Entec® form at the highest doses applied in side dressing resulted in the highest grain yield, independently of the way the N dose was split. Only in the form Entec® the dose of 90 kg ha-1 of N increased grain productivity by 9.6% in comparison with the check treatment.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The aim of this work is to discriminate vegetation classes throught remote sensing images from the satellite CBERS-2, related to winter and summer seasons in the Campos Gerais region Paraná State, Brazil. The vegetation cover of the region presents different kinds of vegetations: summer and winter cultures, reforestation areas, natural areas and pasture. Supervised classification techniques like Maximum Likelihood Classifier (MLC) and Decision Tree were evaluated, considering a set of attributes from images, composed by bands of the CCD sensor (1, 2, 3, 4), vegetation indices (CTVI, DVI, GEMI, NDVI, SR, SAVI, TVI), mixture models (soil, shadow, vegetation) and the two first main components. The evaluation of the classifications accuracy was made using the classification error matrix and the kappa coefficient. It was defined a high discriminatory level during the classes definition, in order to allow separation of different kinds of winter and summer crops. The classification accuracy by decision tree was 94.5% and the kappa coefficient was 0.9389 for the scene 157/128. For the scene 158/127, the values were 88% and 0.8667, respectively. The classification accuracy by MLC was 84.86% and the kappa coefficient was 0.8099 for the scene 157/128. For the scene 158/127, the values were 77.90% and 0.7476, respectively. The results showed a better performance of the Decision Tree classifier than MLC, especially to the classes related to cultivated crops, indicating the use of the Decision Tree classifier to the vegetation cover mapping including different kinds of crops.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The excessive compaction of the soil observed in sod production systems, affects the physical attributes of the soil, which can influence the water infiltration into the soil and hence the rate of soil cover by turfgrasses and time of the sod production. To minimize the effects of soil compacting, some producers use soil preparation equipment that raises the soil on the surface but does not cause excessive roughness which may harm the quality of the sod. Thus, the aim of the present study was to evaluate the infiltration rate and soil cover rate due to different management mechanized in the zoysiagrass sod production. The experimental design had random plots and four replications. The treatments consisted of five mechanized managements of soil: witness (without the use of equipment); coulter blade disc harrow used once (1CB), coulter blade disc harrow used twice (2CB), surface chisel used once (1C), surface chisel and coulter blade disc harrow used once (1C + 1CB). The treatments with 2CB and 1C + 1CB provided greater basic water infiltration speed in the soil and higher rate of soil cover by the turfgrass. The rate of soil cover by turfgrass is positively correlated with water infiltration rate at 133 and 226 DAP, demonstrating the influence of managements used in zoysiagrass sod production and the increment in the infiltration rate of water. Soil preparation utilizing coulter blade disc harrow used twice or surface chisel and coulter blade disc harrow used once is recommended under the conditions this study was done.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The urban area is now home to 50% of world population and the activities related to their disorganized growth, promote the formation of an unhealthy environment. The urban vegetation is necessary and beneficial, because in addition to bringing the man of nature, mitigates climate change and improve the urban microclimate. This study aimed at surveying and analyzing the rate of existing vegetation in urban Piratininga - SP, and from the data obtained, provide allowance for management and planning of green areas and urban areas. Data came from sample survey conducted in 2007 and computerized survey conducted in 2010 indicated that many new neighborhoods have low opt for planting trees of small to medium which does not enhance the urban environment requiring an environmental planning.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Pós-graduação em Engenharia Mecânica - FEG

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)