972 resultados para Photon Counting
Resumo:
Voimistuvan kasvihuoneilmiön myötä kiinnostus hiilidioksidipäästöjen vähentämiseen on lisääntynyt. Ympäristöteknologian tavoitteena on hidastaa tämän ilmiön haitallisia vaikutuksia maailmanlaajuisesti, kansallisesti sekä yritystasolla. Yrityksillä on yhä suurempi paine valmistaa tuotteita ympäristöä vähemmän kuormittavasti. Työn tavoitteena on tarkastella elinkaariarvioinnin käytettävyyttä, kun halutaan tunnistaa pumpputehtaan mahdollisuuksia pienentää tuotteidensa valmistuksen ympäristönkuormittavuutta. Työssä pyritään myös selvittämään ne pumpun valmistuksen prosessit, jotka tuottavat eniten kasvihuonekaasupäästöjä. Tarkastelussa on keskitytty lähinnä hiilidioksidipäästöjen laskentaan. Työssä on käytetty elinkaariarvioinnin menetelmää ja työ noudattaa SFS ISO 14040 ja 14044 standardia. Elinkaariarviointi on hyväksi havaittu keino tunnistaa ne tuotteen tai palvelun yksikköprosessit, joilla on suurin vaikutus ympäristöön. Tutkimuksessa luotiin elinkaariarviointi pumppulaitoksen vuosittain tuottamille pumpuille. Samalla toteutettiin elinkaariarviointiin Excel-malli, jolla voidaan arvioida yksittäisten pumppujen valmistuksen hiilidioksidipäästöt. Tulosten pohjalta on tehty myös joitakin ehdotuksia pumpun valmistuksen hiilidioksidipäästöjen vähentämiseksi. Laskennassa käytetty aineisto kerättiin kirjallisuudesta, pumppulaitoksen alihankkijoilta sekä julkaistuista elinkaariarvioinneista vuoden 2008 kesän aikana. Työssä on osoitettu, että elinkaariarviointia voidaan hyödyntää tunnistettaessa pumpputehtaan ympäristötoimenpiteitä. Saatujen tulosten luotettavuus on kuitenkin riippuvainen käytettävissä olevista resursseista sekä lähtötietojen tarkkuudesta. Erityisesti valimoiden ilmoittamat energiankulutusmäärät vaikuttavat tulosten tarkkuuteen. Tarkempien tulosten saaminen edellyttäisi muun muassa tehtaan alihankkijoiden parempaa tietoisuutta omasta energiankulutuksestaan.
Resumo:
Hydrogen peroxide and chlorine are compared as possible disinfectants for water-cooling circuits. To this purpose, samples taken from the cooling system of a steel making plant were treated (at 25ºC and pH values of 5.5 and 8.5) with varying amounts of the two oxidizing agents (0.0 mg/L, 2.0 mg/L and 6.0 mg/L). The results were evaluated through bacterial counting and measurement of corrosion rates upon AISI1020 carbon steel coupons. Bacterial removal and corrosion effects proved to be similar and satisfactory for both reagents.
Resumo:
Surface tension knowledge of surfactants aqueous solutions is important during amphiphilic molecule manufacturing and new product development, as feedback information to handle synthesis parameters to target performance. Drop counting method is an interesting simplification of drop weight method for surface tension measurements. A simple laboratory measurement device, with capability for temperature control, was assembled to allow investigation of ethoxylated surfactants. The implementation of the method was preceded by a detailed investigation of two factors that may affect the measured surface tension: drop formation velocity and surfactant ethoxylation degree. The limitations of the method are discussed on this basis.
Resumo:
TitDrop II, a practice low-cost titrator based on drop counting is proposed. A microcomputer counts drops in an opto-switch and it receives pH values from a commercial pHmeter with RS-232 serial port. The volume of drops must kept constant and the amount of base in each drop is obtained by standardization in the titrator. A linear behavior between height of reservoir of titrant and drop frequency was observed, but there is no influence of low height on drop volume. Acetic acidity in samples of vinager was compared with volumetric titration, and deviation between -2.6 to 3.9% was observed.
Resumo:
An undergraduate physical chemistry experiment based on the drop counting method for surface tension measurements is proposed to demonstrate adsorption isotherms of binary aqueous solutions of ethanol, n-propanol, and n-butanol. Excess surface is obtained by the derivative of surface tension taken with respect to alcohol activity, after this activity calculation using van Laar equation. Laboratory class contents are surface tension, excess surface, percolation of hydrogen bonds, micelle, activity, and ideal solution.
Resumo:
Dirt counting and dirt particle characterisation of pulp samples is an important part of quality control in pulp and paper production. The need for an automatic image analysis system to consider dirt particle characterisation in various pulp samples is also very critical. However, existent image analysis systems utilise a single threshold to segment the dirt particles in different pulp samples. This limits their precision. Based on evidence, designing an automatic image analysis system that could overcome this deficiency is very useful. In this study, the developed Niblack thresholding method is proposed. The method defines the threshold based on the number of segmented particles. In addition, the Kittler thresholding is utilised. Both of these thresholding methods can determine the dirt count of the different pulp samples accurately as compared to visual inspection and the Digital Optical Measuring and Analysis System (DOMAS). In addition, the minimum resolution needed for acquiring a scanner image is defined. By considering the variation in dirt particle features, the curl shows acceptable difference to discriminate the bark and the fibre bundles in different pulp samples. Three classifiers, called k-Nearest Neighbour, Linear Discriminant Analysis and Multi-layer Perceptron are utilised to categorize the dirt particles. Linear Discriminant Analysis and Multi-layer Perceptron are the most accurate in classifying the segmented dirt particles by the Kittler thresholding with morphological processing. The result shows that the dirt particles are successfully categorized for bark and for fibre bundles.
Resumo:
This work was done with the aim of computing all the species of Hydrozoa (Siphonophora excluded) that have been collected on the Brazilian coast, or in the pelagial, near the coast (some of the "Meteor" Stations). Nutting's (1900, 1904, 1915) and Mayer's (1910) monographs were taken as starting points and later papers and the Zoological Record used to check posterior findings. As a whole, 116 different valid names, among species and forms, have been mentioned from the Brazilian coast, distributed among 60 genera. Of the 116 species, 82 are represented by hydropolyps, 30 by hydromedusae (11 of which belong to the Trachylina and therefore lack a polypoid generation) and finally, by 4 species of which are known both polypoid and medusoid generations. The subdivision of the coast has been made at random, on account of the scarcity of the findings, except for the best known district, that goes from the latitude of Vitoria (State of Espirito Santo, at about 20ºlat.S.) to the bay of Santos (State of São Paulo, about 24ºlat.S.). The latitude of Cabo Frio (23ºlat.S.) was considered as a possible natural barrier, and the results of the global counting of the distribution of the hydropolyps North and South of 23ºlat.S. is the following: 29 species are known only North of Cabo Frio, 26 only from the same latitude (see direction of the coast, along parallel 23ºS.) or further South and 28 species are known both North and South of the coast (of these, 5 species are "cosmopolitan"). Therefore it seems quite possible that Cabo Frio really is a barrier to the distribution of 55 species. 26 species are endemic to the Brazilian coast, of these, only 5 are found both North and South of the Cape, while-14 are found only North and 7 only South. No studies can be done, on the bathymetric distribution in relation to the latitude. These results must be considered as provisory since more extensive researches will probably alter these figures. However, I believe that they are significative as a mean index of the condition of the hydrozoan fauna of the Brazilian coast. A tentative working hypothesis is presented as to the possible factors that confer such a zoogeographic importance to the region of Cabo Frio, a fact that has been foreseen by Ekman (1935, p. 73). Geographic position, currents, latitude and nature of the sea bottom between the continent and the oceanic island of Trindade have been taken in consideration, and all of them seem to be possible eficient factors of separation. Furthermore, according to the data obtained by the "Meteor" Expedition in July 2, 1926, at station 164 (23º8'lat.S. - 42º5'long.W.) and station 165 (23º35'lat.S. - 40º52'long.W.) and by what is known by hearsay and local experience of the region (exact continued study is urgently needed), it seems possible that, off from the sharp curve that the coast has at Cabo Frio, there may be an irregularity of the general scheme of the current and local upwelling may be present that would explain the local low temperature, low salinity and high density of the superficial layers as well as the abundance of fishes; these factors might contribute towards the establishement of a zoogeographical barrier. Further work is needed and nothing more than an hypothesis can be presented for the moment.
Resumo:
Photosystem II (PSII) is susceptible to light-induced damage defined as photoinhibition. In natural conditions, plants are capable of repairing the photoinhibited PSII by on-going degradation and re-synthesis of the D1 reaction centre protein of PSII. Photoinhibition is induced by both visible and ultraviolet light and photoinhibition occurs under all light intensities with the same efficiency per photon. In my thesis work, I studied the reaction kinetics and mechanism of photoinhibition of PSII, as well as photoprotection in leaves of higher plants. Action spectroscopy was used to identify photoreceptors of photoinhibition. I found that the action spectrum of photoinhibition in vivo shows resemblance to the absorption spectra of manganese model compounds of the oxygen evolving complex (OEC) suggesting a role for manganese as a photoreceptor of photoinhibition under UV and visible light. In order to study the protective effect of non-photochemical quenching, the action spectrum was measured from leaves of wild type Arabidopsis thaliana and two mutants impaired in nonphotochemical quenching of chlorophyll a excitations. The findings of action spectroscopy and simulations of chlorophyll-based photoinhibition mechanisms suggested that quenching of antenna excitations protects less efficiently than would be expected if antenna chlorophylls were the only photoreceptors of photoinhibition. The reaction kinetics of prolonged photoinhibition was studied in leaves of Cucurbita maxima and Capsicum annuum. The results indicated that photoinhibitory decrease in both the oxygen evolution activity and ratio of variable to maximum fluorescence follows firstorder kinetics in vivo. The persistence of first-order kinetics suggests that already photoinhibited reaction centres do not protect against photoinhibition and that the mechanism of photoinhibition does not have a reversible intermediate. When Cucurbita maxima leaves were photoinhibited with saturating single-turnover flashes and continuous light, the light response curve of photoinhibition was found to be essentially a straight line with both types of illumination, suggesting that similar photoinhibition mechanisms might function during illumination with continuous light and during illumination with short flashes.
Resumo:
In this thesis three experiments with atomic hydrogen (H) at low temperatures T<1 K are presented. Experiments were carried out with two- (2D) and three-dimensional (3D) H gas, and with H atoms trapped in solid H2 matrix. The main focus of this work is on interatomic interactions, which have certain specific features in these three systems considered. A common feature is the very high density of atomic hydrogen, the systems are close to quantum degeneracy. Short range interactions in collisions between atoms are important in gaseous H. The system of H in H2 differ dramatically because atoms remain fixed in the H2 lattice and properties are governed by long-range interactions with the solid matrix and with H atoms. The main tools in our studies were the methods of magnetic resonance, with electron spin resonance (ESR) at 128 GHz being used as the principal detection method. For the first time in experiments with H in high magnetic fields and at low temperatures we combined ESR and NMR to perform electron-nuclear double resonance (ENDOR) as well as coherent two-photon spectroscopy. This allowed to distinguish between different types of interactions in the magnetic resonance spectra. Experiments with 2D H gas utilized the thermal compression method in homogeneous magnetic field, developed in our laboratory. In this work methods were developed for direct studies of 3D H at high density, and for creating high density samples of H in H2. We measured magnetic resonance line shifts due to collisions in the 2D and 3D H gases. First we observed that the cold collision shift in 2D H gas composed of atoms in a single hyperfine state is much smaller than predicted by the mean-field theory. This motivated us to carry out similar experiments with 3D H. In 3D H the cold collision shift was found to be an order of magnitude smaller for atoms in a single hyperfine state than that for a mixture of atoms in two different hyperfine states. The collisional shifts were found to be in fair agreement with the theory, which takes into account symmetrization of the wave functions of the colliding atoms. The origin of the small shift in the 2D H composed of single hyperfine state atoms is not yet understood. The measurement of the shift in 3D H provides experimental determination for the difference of the scattering lengths of ground state atoms. The experiment with H atoms captured in H2 matrix at temperatures below 1 K originated from our work with H gas. We found out that samples of H in H2 were formed during recombination of gas phase H, enabling sample preparation at temperatures below 0.5 K. Alternatively, we created the samples by electron impact dissociation of H2 molecules in situ in the solid. By the latter method we reached highest densities of H atoms reported so far, 3.5(5)x1019 cm-3. The H atoms were found to be stable for weeks at temperatures below 0.5 K. The observation of dipolar interaction effects provides a verification for the density measurement. Our results point to two different sites for H atoms in H2 lattice. The steady-state nuclear polarizations of the atoms were found to be non-thermal. The possibility for further increase of the impurity H density is considered. At higher densities and lower temperatures it might be possible to observe phenomena related to quantum degeneracy in solid.
Resumo:
New luminometric particle-based methods were developed to quantify protein and to count cells. The developed methods rely on the interaction of the sample with nano- or microparticles and different principles of detection. In fluorescence quenching, timeresolved luminescence resonance energy transfer (TR-LRET), and two-photon excitation fluorescence (TPX) methods, the sample prevents the adsorption of labeled protein to the particles. Depending on the system, the addition of the analyte increases or decreases the luminescence. In the dissociation method, the adsorbed protein protects the Eu(III) chelate on the surface of the particles from dissociation at a low pH. The experimental setups are user-friendly and rapid and do not require hazardous test compounds and elevated temperatures. The sensitivity of the quantification of protein (from 40 to 500 pg bovine serum albumin in a sample) was 20-500-fold better than in most sensitive commercial methods. The quenching method exhibited low protein-to-protein variability and the dissociation method insensitivity to the assay contaminants commonly found in biological samples. Less than ten eukaryotic cells were detected and quantified with all the developed methods under optimized assay conditions. Furthermore, two applications, the method for detection of the aggregation of protein and the cell viability test, were developed by utilizing the TR-LRET method. The detection of the aggregation of protein was allowed at a more than 10,000 times lower concentration, 30 μg/L, compared to the known methods of UV240 absorbance and dynamic light scattering. The TR-LRET method was combined with a nucleic acid assay with cell-impermeable dye to measure the percentage of dead cells in a single tube test with cell counts below 1000 cells/tube.
Resumo:
The Standard Model of particle physics is currently the best description of fundamental particles and their interactions. All particles save the Higgs boson have been observed in particle accelerator experiments over the years. Despite the predictive power the Standard Model there are many phenomena that the scenario does not predict or explain. Among the most prominent dilemmas is matter-antimatter asymmetry, and much effort has been made in formulating scenarios that accurately predict the correct amount of matter-antimatter asymmetry in the universe. One of the most appealing explanations is baryogenesis via leptogenesis which not only serves as a mechanism of producing excess matter over antimatter but can also explain why neutrinos have very small non-zero masses. Interesting leptogenesis scenarios arise when other possible candidates of theories beyond the Standard Model are brought into the picture. In this thesis, we have studied leptogenesis in an extra dimensional framework and in a modified version of supersymmetric Standard Model. The first chapters of this thesis introduce the standard cosmological model, observations made on the photon to baryon ratio and necessary preconditions for successful baryogenesis. Baryogenesis via leptogenesis is then introduced and its connection to neutrino physics is illuminated. The final chapters concentrate on extra dimensional theories and supersymmetric models and their ability to accommodate leptogenesis. There, the results of our research are also presented.
Resumo:
Työn tavoitteena oli luoda työkalu kestomagneettikoneiden roottoreiden väsymisen analysointia varten. Työkalu toteutettiin siten, että siihen voidaan liittää oikeasta koneesta mitattu kuormitusdata, sekä tarvittavat materiaalitiedot. Kuormitusdata muunnetaan työkalussa jännityshistoriaksi käyttämällä elementtimenetelmän avulla laskettavaa skaalauskerrointa. Kestoiän laskemiseen analyysityökalu käyttää jännitykseen perustuvaa menetelmää sekä rainflowmenetelmää ja Palmgren-Minerin kumulatiivista vauriosääntöä. Lisäksi työkalu tekee tutkittavalle tapaukselle Smithin väsymislujuuspiirroksen. Edellä mainittujen menetelmien lisäksi työn teoriaosassa esiteltiin väsymisanalyysimenetelmistä myös paikalliseen venymään perustuva menetelmä sekä murtumismekaniikka. Nämä menetelmät jäivät monimutkaisuutensa vuoksi toteuttamatta työkalussa. Väsymisanalyysityökalulla laskettiin kestoiät kahdelle esimerkkitapaukselle. Kummassakin tapauksessa saatiin tulokseksi ääretön kestoikä, mutta aksiaalivuokoneen roottorin dynaaminen varmuus oli pieni. Vaikka tulokset vaikuttavat järkeviltä, ne olisi vielä hyvä verifioida esimerkiksi kaupallisen ohjelmiston avulla täyden varmuuden saamiseksi.