Determinação de comprimentos de encurvadura de pilares-estaca

O trabalho desenvolvido na presente dissertação tem como principal objetivo a determinação da carga crítica e do respetivo comprimento de encurvadura de pilares-estaca, contemplando diversos casos de estudo. São efetuadas duas abordagens ao problema de forma a poder realizar estudos comparativos das metodologias adotadas. O primeiro tipo de análise é baseado no método de Elementos Finitos; o segundo tipo de análise é efetuado com base no programa de cálculo automático SAP2000, utilizando elementos de barra. Para resolução do problema em questão, comum em pilares de pontes ou viadutos em betão armado, considera-se comportamento elástico do material do pilar e do solo onde este se encontra implantado, admitindo um modelo de fundação de Winkler. Primeiramente, são apresentados os fundamentos teóricos que suportam o tema da dissertação de forma a dar ao leitor um enquadramento de vários aspetos inerentes a fenómenos de instabilidade estrutural. Em seguida, descreve-se a metodologia adotada para análise do problema. Finalmente são apresentados casos de estudo retirados de um projeto realizado num viaduto. Nesses casos, são analisados pilares com geometrias diferenciadas, quer na direção longitudinal quer na direção transversal.

Thrombocytopenia as a surrogate marker of hepatosplenic schistosomiasis in endemic areas for Schistosomiasis mansoni

Introduction This study aimed to evaluate whether a low platelet count is a good surrogate marker of hepatosplenic schistosomiasis (HSS) in a rural area of Brazil. A small district in southeastern Brazil, with a population of 1,543 individuals and a 23% prevalence of schistosomiasis, was selected for this investigation. Methods In July 2012, 384 volunteers were subjected to clinical, ultrasonography (US), and laboratory examinations, including stool sample analysis. The HSS patients were classified into four groups: Group 1 consisted of patients with a spleen >13cm and liver fibrosis; Group 2 consisted of patients with a palpable spleen and spleen>13cm measured by US; Group 3 consisted of patients with a spleen >13cm measured by US; and Group 4 consisted of patients with a palpable spleen. Results Eight patients were in Group 1 (2.1%), twenty-one were in Group 2 (5.5%), eight were in Group 3 (2.1%), and eighteen were in Group 4 (4.7%). A significant difference in the mean platelet counts was observed between the patients with and without HSS (p<0.01). Based on the receiver operating characteristic (ROC) curve (platelet count <143,000/mm3), the sensitivity was greater than 92% in all groups, and the specificity varied from 44.4% to 75%. Conclusions We concluded that in endemic areas, thrombocytopenia demonstrates good sensitivity for detecting HSS and may be used as a screening tool to identify patients with HSS.

Paradigmas construtivos da máquina elétrica de relutância comutada: aplicação em regime de baixas velocidades. Aproveitamentos de energias renováveis

A máquina elétrica de relutância comutada (MERC) é, inerentemente, um conversor eletromecânico de velocidade variável, facilmente controlado através dos instantes de excitação e desexcitação do circuito magnético partilhado pelas fases. A sua robustez e simplicidade construtiva (só enrolamentos concentrados no estator), flexibilidade de controlo, bom rendimento numa gama alargada de velocidades, a sua fiabilidade e tolerância a defeitos fazem desta máquina uma opção válida para sistemas de conversão de energia caraterizados por baixas velocidades. A tendência crescente de instalar turbinas eólicas em offshore, para além dos desafios económicos e tecnológicos que levanta, torna a fiabilidade e a tolerância a defeitos, requisitos de vital importância. Neste contexto, a potencial aplicação da MERC a geradores eólicos sem recurso a caixa de velocidades, já que esta penaliza o custo, o volume e a fiabilidade do sistema, serviu de motivação a este trabalho. Nesta dissertação apresentam-se, numa perspetiva comparativa, diferentes paradigmas construtivos da MERC para o funcionamento gerador em regime de baixas velocidades, caraterístico dos aproveitamentos de energias renováveis. Para o efeito, formularam-se leis de escala apropriadas a análises dimensionais de topologias diferenciadas pelas caraterísticas dos circuitos elétrico e magnético e do seu posicionamento relativo. Estes modelos de escala permitiram introduzir constrangimentos físicos e dos materiais que condicionam o projeto da máquina, como a saturação magnética e limites de temperatura. Das análises dimensionais e validação com elementos finitos, elegeu-se uma estrutura magnética modular com caminhos de fluxo curtos que foi comparada com um protótipo de MERC regular, previsto para equipar um gerador eólico. Quando comparadas as duas topologias, assumindo dimensões idênticas, a modular apresentou um significativo ganho de potência específica mantendo bons níveis de rendimento. Pretende-se assim alargar a discussão do projeto das MERC, geralmente confinado a topologias regulares, a um contexto mais abrangente que inclua novos paradigmas construtivos.

As concepções das famílias no envolvimento parental

Dissertação de Mestrado apresentada ao ISPA - Instituto Universitário

Autoconceito profissional e satisfacao profissional de professores de 2º e 3º ciclo

Dissertação de Mestrado apresentada ao ISPA - Instituto Universitário

Production of metallo-β-lactamase among Pseudomonas aeruginosa strains isolated in the State of Sergipe, Brazil

INTRODUCTION: Acquired production of metallo-β-lactamases is an important mechanism of resistance in Pseudomonas aeruginosa. The objective of this study was to investigate the production of metallo-β-lactamase and the genetic diversity among ceftazidime-resistant P. aeruginosa isolates from State of Sergipe, Brazil. METHODS: Metallo-β-lactamase was investigated using the disk approximation test and polymerase chain reaction (PCR). Genetic diversity was evaluated by pulsed-field gel electrophoresis (PFGE). RESULTS: A total of 48 (51.6%) isolates were resistant to ceftazidime. Six (12.2%) of these were positive for metallo-β-lactamase production. Only two (4.1%) of the ceftazidime-resistant isolates carried the bla SPM-1 gene. CONCLUSIONS: Production of metallo-β-lactamases was not the main mechanism of resistance to ceftazidime and carbapenems among P. aeruginosa strains in Sergipe, Brazil.

Fiscal adjustments and sovereign default in different government systems

This paper extends the model of Spolaore (2004) about adjustments in di erent government systems for the context of scal adjustments and sovereign default. We introduce asymmetry between groups in income and preferences towards scal reforms. Default a ects di erently each group and becomes a possibility if reforms are not enacted after public nance solvency shocks, in uencing the political game according to its likelihood. With the extensions, new situations which were not possible with the previous framework arise. After the exposition of the model, the Argentine default in 2001 provides an example of the political con icts addressed by the model.

Phenotypic and genotypic profile of pyrethroid resistance in populations of the mosquito Aedes aegypti from Goiânia, Central West Brazil

ABSTRACTINTRODUCTION:The mosquito Aedes aegypti has evolved resistance to pyrethroid insecticides. The present study evaluated Ae. aegypti from Goiânia for the resistant phenotype and for mutations associated with resistance.METHODS:Insecticide dose-response bioassays were conducted on mosquitoes descended from field-collected eggs, and polymerase chain reaction (PCR) was used to genotype 90 individuals at sites implicated in pyrethroid resistance.RESULTS:All mosquito populations displayed high levels of resistance to deltamethrin, as well as high frequencies of the 1016Ile kdr and 1534Cys kdrmutations.CONCLUSIONS:Aedes aegypti populations in the Goiânia area are highly resistant to deltamethrin, presumably due to high frequencies of kdr(knockdown-resistance) mutations.

Os efeitos das campanhas negativas mediáticas no ato eleitoral: caso José Sócrates nas legislativas 2009 e 2011

Nos dias de hoje, o marketing político e a assessoria de imprensa tornaram-se ferramentas essenciais para um político. Sem estas ferramentas nenhum político seria capaz de responder às exigências da imagem que o século XXI acarreta. Uma boa imagem/reputação são fatores chave para o sucesso eleitoral de qualquer candidato. Em Portugal, os media são o principal palco de visualização e obtenção de conhecimento das questões políticas pela maioria das pessoas. Políticos e media devem andar de “mãos dadas”. Os media podem tornar-se os principais “inimigos” de um político. Que contornos e proporções poderão tomar uma “campanha negativa” desencadeada pelos media a um político em plena campanha eleitoral? Através de um estudo de caso iremos perceber os seus efeitos e consequências mediáticas, nas legislativas de 2009 e 2011 de José Sócrates.

Modelação dinâmica do embate de embarcações sobre pilares de pontes

Após o embate de uma embarcação contra o maciço do pilar da Ponte 25 de Abril em Lisboa e tendo em conta a importância desta estrutura, levantaram-se algumas preocupações referentes à segurança da ponte quanto a este tipo de solicitações. Como tal, no seguimento desta problemática, o principal objetivo do presente trabalho é avaliar a resposta da Ponte 25 de Abril sujeita ao embate de embarcações. Sabe-se que a Ponte 25 de Abril foi dimensionada tendo como base o sismo de El Centro de 1940, não tendo sido feito um estudo pormenorizado na temática do embate de uma embarcação uma vez que os momentos na base do maciço, resultantes do sismo estudado no projeto, eram largamente superiores aos mesmos momentos provocados por uma força no topo do maciço que pretendia simular o embate de uma embarcação. No entanto, as expressões que pretendem simular o efeito de um embate de uma embarcação em pilares de pontes evoluíram desde a data do projeto. Sendo os maciços dos pilares os elementos estruturais diretamente sujeitos ao evento do embate, transmitindo posteriormente os deslocamentos e forças aos respetivos pilares, o presente estudo focou-se nestes elementos. Para se estudar o comportamento do maciço de um pilar da ponte sujeito a estas ações dinâmicas, foram necessários dados para se definir a estrutura em causa e a respetiva solicitação, como também foi necessário um programa de cálculo não-linear de estruturas indicado para o presente caso. Obteve-se o projeto da Ponte 25 de Abril assim como dados relativos a todas as embarcações que cruzaram a Ponte no ano de 2014. A modelação da estrutura e respetivas solicitações foram feitas com recurso ao programa de cálculo não-linear de estruturas Extreme Loading for Structures, que utiliza o Método dos Elementos Aplicados. A partir do modelo do maciço do pilar da ponte traçaram-se as curvas de capacidade dinâmica e estática da estrutura e simularam-se tanto o sismo de El Centro de 1940 como o embate da embarcação mais condicionante que poderia ter ocorrido no ano de 2014. Com base nos resultados obtidos nos ensaios efetuados no presente trabalho verificou-se que, embora o embate de uma embarcação possa ser mais condicionante do que o sismo para o qual foi dimensionada, a estrutura do maciço resiste a ambas as solicitações não apresentando danos significativos.

Ten years of a hantavirus disease emergency in the Federal District, Brazil

Abstract: INTRODUCTION: Hantavirus diseases are emerging human diseases caused by Hantavirus spp. of the Bunnyaviridae family. Hantavirus pulmonary syndrome (HPS) has been detected in the Federal District (DF) of Brazil since 2004. Among the 27 Brazilian Federal Units, DF has the highest fatality rate. More than 10 years have already passed since then, with confirmation of cases caused by the Araraquara and Paranoa species. The reservoir is Necromys lasiurus. METHODS: Local surveillance data of the confirmed cases were analyzed, including age, sex, month and year of occurrence, clinical symptoms, syndromes and outcomes, and probable transmission place (PTP). The cases were mainly confirmed by IgM detection with a capture enzyme immunoassay. The cases were classified as autochthonous if PTPs were in the DF area. RESULTS: From 2004 to 2013, in the DF, 126 cases of hantavirus were confirmed, and the cumulative incidence was 5.0 per 100,000 inhabitants. The occurrence of cases was predominantly from April to August. At least 75% of the cases were autochthonous. Acute respiratory failure was reported in 47.5% of cases, and the fatality rate was 40%. CONCLUSIONS: In the DF, the cumulative incidence of HPS was one of the highest worldwide. A seasonal pattern of hantavirus disease in the dry season is clear. There was a high frequency of severe clinical signals and symptoms as well as a high fatality rate. For the near future, visitors and inhabitants of DF rural areas, particularly male adults, should receive continuous education about hantavirus transmission and prevention.

The early metallurgy in Southwestern Iberia: metals from the Chalcolithic Settlement of São Pedro (Redondo)

Archaeological excavations carried out in the archaeological site of São Pedro (Southern Portugal) revealed a Chalcolithic settlement occupied in different moments of the 3rd millennium BC. The material culture recovered includes different types of materials, such as ceramics, lithics and metals. The later comprises about 30 artefacts with different typologies such as tools (e.g. awls, chisels and a saw) and weapons (e.g. daggers and arrowheads) mostly belonging to the 2nd and 3rd quarter of the 3rd millennium BC. In the present work the collection of chalcolithic metallic artefacts recovered in São Pedro was characterized. Analytical studies involved micro energy dispersive X-ray fluorescence spectrometry (micro-EDXRF) to determine elemental composition, together with optical microscopy and Vickers microhardness testing for microstructural characterisation and hardness determination. Main results show copper with variable amounts of arsenic and very low content of other impurities, such as iron. Moreover, nearly half of the collection is composed by arsenical copper alloys (As > 2 wt.%) and an association was found between arsenic content and typology since the weapons group (mostly daggers) present higher values than tools (mostly awls). These results suggest some criteria in the selection of arsenic-rich copper ores or smelting products. Furthermore, after casting an artefact would have been hammered, annealed and sometimes, finished with a hammering operation. Additionally, microstructural variations in this collection reveal somewhat different operational conditions during casting, annealing and forging, as expected in such a primitive metallurgy. Moreover the operational sequence seems to be used to achieve the required shape to the object, rather than to intentionally make the alloy harder. Overall, this study suggests that Chalcolithic metallurgists might have a poor control of the addition of arsenic and/or were unable to use this element to increase the hardness of tools and weapons. Finally, the compositions, manufacturing processes and hardness were compared to those from neighbouring regions and different chronological periods.

Machine diagnosis based on artificial immune systems

Nowadays, many of the manufactory and industrial system has a diagnosis system on top of it, responsible for ensuring the lifetime of the system itself. It achieves this by performing both diagnosis and error recovery procedures in real production time, on each of the individual parts of the system. There are many paradigms currently being used for diagnosis. However, they still fail to answer all the requirements imposed by the enterprises making it necessary for a different approach to take place. This happens mostly on the error recovery paradigms since the great diversity that is nowadays present in the industrial environment makes it highly unlikely for every single error to be fixed under a real time, no production stop, perspective. This work proposes a still relatively unknown paradigm to manufactory. The Artificial Immune Systems (AIS), which relies on bio-inspired algorithms, comes as a valid alternative to the ones currently being used. The proposed work is a multi-agent architecture that establishes the Artificial Immune Systems, based on bio-inspired algorithms. The main goal of this architecture is to solve for a resolution to the error currently detected by the system. The proposed architecture was tested using two different simulation environment, each meant to prove different points of views, using different tests. These tests will determine if, as the research suggests, this paradigm is a promising alternative for the industrial environment. It will also define what should be done to improve the current architecture and if it should be applied in a decentralised system.

Aortofemoral thromboendarterectomy

PURPOSE: To study whether endarterectomy is feasible in all patients with aortofemoral atherosclerotic obstruction, considering early and late results. METHODS: A clinical, prospective, and descriptive study carried out in a university hospital. Inclusion criteria were atherosclerotic aortofemoral obstructive disease, clinical status compatible with major surgery, and absence of prior restorative procedure. Exclusion criteria were aneurysm, inflammatory arterial disease, and prior restorative procedure found during surgery. Eighty patients entered the protocol, but 9 were excluded (11.2%). Seventy-one patients, mean age of 57.3 years, underwent endarterectomy. Operative indications were intermittent claudication and critical ischemia. A ring-stripper endarterectomy technique was employed in all patients. Results were related to age, gender, symptoms, presence of diabetes mellitus, extension of endarterectomy, and extent of obstructive disease. Chi square or Fisher exact tests were used when appropriate, and the Wilkoxon (Gehan) test was used to compare survival curves. RESULTS: Sixty-eight (100%) endarterectomies were patent at discharge. The mortality rate was 4.2%. The amputation rate (4.3%) was higher in diabetic patients and when there was associated femoropopliteal obstruction. The 5-year survival rate was 83.3%, and late deaths were mostly cardiovascular. Diabetes mellitus, age above 65 years, and associated femoropopliteal obstruction lowered the survival rate. The 5-year patency rate was 87.0%. Critical ischemia and less extensive endarterectomies were associated with a lower patency rate. There were no anastomotic aneurysms or deep infections. CONCLUSIONS: Aortofemoral thromboendarterectomy is feasible in 90% of patients, early mortality rate is low, diabetic patients and those with associated femoropopliteal obstructive disease have a higher mortality rate, amputation rate is low, late deaths are mostly cardiovascular, and late patency rate is high, and even higher in the intermittent claudication group.