Hydrogel-forming microneedle arrays made from light-responsive materials for on-demand transdermal drug delivery

We describe, for the first time, stimuli-responsive hydrogel-forming microneedle (MN) arrays that enable delivery of a clinically-relevant model drug (ibuprofen) upon application of light. MN arrays were prepared using a polymer prepared from 2-hydroxyethyl methacrylate (HEMA) and ethylene glycol dimethacrylate (EGDMA) by micromolding. The obtained MN arrays showed good mechanical properties. The system was loaded with up to 5% (w/w) ibuprofen included in a light-responsive 3,5-dimethoxybenzoin conjugate. Raman spectroscopy confirmed the presence of the conjugate inside the polymeric MN matrix. In vitro, this system was able to deliver up to three doses of 50 mg of ibuprofen upon application of an optical trigger over a prolonged period of time (up to 160 hours). This makes the system appealing as a controlled release device for prolonged periods of time. We believe that this technology has potential for use in ?on-demand? delivery of a wide range of drugs in a variety of applications relevant to enhanced patient care.

Antifungal Activity of Peptides From the African Volcano Frog

Background: Candidal species, particularly Candida albicans are common pathogens in the oral cavity and perioral region. Many of the manifestations of candidiasis are associated with the formation of Candida biofilms on host surfaces and/or implanted biomaterials. Biofilms are clinically important due to their increased resistance to therapeutic intervention and the ability of cells within the biofilm to withstand host immune defences.
Objectives: The present study was designed to investigate the antifungal activity of two peptides found in skin secretions of the African volcano frog (Xenopus amieti) against the type strain of C. albicans NCTC 3179.
Methods: The antifungal activity of magainin-AM1 and peptide glycine-leucine-amide (PGLa-AM1) against C. albicans NCTC 3179 was studied in both planktonic and biofilm forms. Radial diffusion assays were used to obtain the minimum inhibitory concentration (MIC) of magainin-AM1 and PGLa-AM1 against planktonic C. albicans. Time kill assays were used to determine the time dependent fungicidal action of the peptides at both 4oC and 37oC. A 96 well microtitre plate model for candidal biofilm formation was employed to study the ability of the peptides to disrupt the early biofilm development (up to 24 hours) compared with the antifungal drug fluconazole. Biofilm formation was determined quantitatively using the crystal violet assay.
Results: Both magainin-AM1 and PGLa-AM1 demonstrated inhibitory activity against Candida albicans, with MIC values of 24.3 uM and 7.5uM respectively. Time-kill assays revealed bactericidal activity of both peptides at 37oC and 4oC. Magainin-AM1 and PGLa-AM1 inhibited biofilm formation in microtitre plate assays. The peptides were particularly effective during early biofilm establishment when compared with fluconazole treatment.
Conclusions: Magainin-AM1 and PGLa-AM1 are active against C albicans in both planktonic and biofilm forms. Further testing of this peptide family against candidal biofilms is recommended.

Molecular phylogenetic analysis of a known and a new hydrothermal vent octopod:Their relationships with the genus Benthoctopus (Cephalopoda: Octopodidae)

The resolution of evolutionary relationships among deep-sea incirrate octopuses has been hindered by the paucity of individuals available for morphological studies and by the lack of tissue samples preserved using fixatives compatible with simple DNA extraction techniques. Evolutionary relationships from 11 species of deep-sea incirrate octopuses were investigated using 2392 base pairs (bp) of DNA from four mitochondrial genes (12S rDNA, 16S rDNA, cytochrome c oxidase subunit III, and cytochrome b) and the nuclear gene, rhodopsin. Morphological examination of these species was also undertaken. Molecular analyses distinguish a species of octopus from hydrothermal vents at Manus Basin from the vent octopodid Vulcanoctopus hydrothermalis known from vents on the East Pacific Rise. Both are herein considered members of the clade currently assigned the name Benthoctopus, although taxonomic implications preclude formally naming Vulcanoctopus as a junior synonym. Morphological investigations led to the conclusion that Benthoctopus macrophallus is a junior synonym of Benthoctopus yaquinae. An amended diagnosis of Benthoctopus is provided with additional information on male reproductive characteristics. Copyright © 2009 · Magnolia Press.

Lateral bias and temperament in the domestic cat (Felis silvestris)

Research points to a relationship between lateralization and emotional functioning in humans and many species of animal. The present study explored the association between paw preferences and emotional functioning, specifically temperament, in a species thus far overlooked in this area, the domestic cat. Thirty left-pawed, 30 right-pawed, and 30 ambilateral pet cats were recruited following an assessment of their paw preferences using a food-reaching challenge. The animals’ temperament was subsequently assessed using the Feline Temperament Profile (FTP). Cats’ owners also completed a purpose-designed cat temperament (CAT) scale. Analysis revealed a significant relationship between lateral bias and FTP and CAT scale scores. Ambilateral cats had lower positive (FTP+) scores, and were perceived as less affectionate, obedient, friendly, and more aggressive, than left or right-pawed animals. Left and right pawed cats differed significantly on 1 trait on the CAT scale, namely playfulness. The strength of the cats’ paw preferences was related to the animals’ FTP and CAT scores. Cats with a greater strength of paw preference had higher FTP + scores than those with a weaker strength of paw preference. Animals with stronger paw preferences were perceived as more confident, affectionate, active, and friendly than those with weaker paw preferences. Results suggest that motor laterality in the cat is strongly related to temperament and that the presence or absence of lateralization has greater implications for the expression of emotion in this species than the direction of the lateralized bias.

The influence of water motion on the growth rate of the kelp Laminaria digitata

The shallow water kelp Laminaria digitata, abundant in coastal zones of the North Atlantic, is exposed to a range of hydrodynamic environments that makes it ideal for assessing the role of water motion on their growth rate. Here we quantify the growth of L. digitata, as a factor of blade and stipe elongation, at sites adjacent to Strangford Lough, Northern Ireland under different hydrodynamic conditions over a one year period. A modelling approach was used to numerically determine both the temporal and spatial variability of the hydrodynamic environment. Ambient seawater nutrient concentrations, temperature and irradiance were measured as well as the internal nutrient status of the L. digitata populations. Kelp populations growing in the greatest and lowest water motion showed the lowest growth rates. Differences observed in growth rate could not be attributed to seawater nutrient availability, temperature or light. The internal nutrient status also suggested no influence on the observed differences in growth rate. Therefore if there are minimal differences in light, temperature and nutrients between sites, then populations of L. digitata exposed to different water motions are likely to exhibit different growth rates. It is suggested that the growth rate differences observed were a function of water motion with the possibility that, in response to the hydrodynamic forces experienced by the algal cells, L. digitata kelps in the high energy environments were putting more energy into strengthening cell walls rather than blade elongation

Potentially inappropriate prescribing among people with dementia in primary care: a retrospective cross-sectional study using the Enhanced Prescribing Database

Background: Little is known about prescribing appropriateness for community-dwelling people with dementia (PWD).
Objective To estimate potentially inappropriate prescribing (PIP) prevalence among PWD in primary care in Northern Ireland, and to investigate associations between PIP and polypharmacy, age and gender.

Methods: A retrospective cross-sectional study was conducted, using data from the Enhanced Prescribing Database. Patients were eligible if a medicine indicated for dementia management was dispensed to them during 01/01/2013 – 31/12/2013. Polypharmacy was indicated by use of ≥4 repeat medications from different drug groups. A subset of the Screening Tool of Older Persons Potentially Inappropriate Prescriptions (STOPP) criteria, comprising 36 indicators, was applied to the dataset. Overall prevalence of PIP and the prevalence per each STOPP criterion was calculated as a proportion of all eligible persons in the dataset. Logistic regression was used to investigate associations between PIP, polypharmacy, age and gender.

Results: The study population comprised 6826 patients. Polypharmacy was observed in 81.5% (n=5564) of patients. PIP prevalence during the study period was 64.4% (95% CI 63.2 – 65.5; n=4393). The most common instance of PIP was the use of anticholinergic/antimuscarinic medications (n=1718; 25.2%; 95% CI 24.2 – 26.2). In multivariable analyses, both polypharmacy and gender (being female) were associated with PIP, with odds ratios of 7.6 (95% CI 6.6 – 8.7) and 1.3 (95% CI 1.2 – 1.4) respectively. No association was observed between PIP and age, after adjustments for gender and polypharmacy.

Conclusion: This study identified a high prevalence of PIP in community-dwelling PWD. Future interventions may need to focus on certain therapeutic categories and polypharmacy.

The Value of Full Scale Prototype Data - Testing Oyster 800 at EMEC, Orkney

This paper demonstrates the unparalleled value of full scale data which has been acquired from ocean trials of Aquamarine Power’s Oyster 800 Wave Energy Converter (WEC) at the European Marine Energy Centre (EMEC), Orkney, Scotland.
High quality prototype and wave data were simultaneously recorded in over 750 distinct sea states (comprising different wave height, wave period and tidal height combinations) and include periods of operation where the hydraulic Power Take-Off (PTO) system was both pressurised (damped operation) and de-pressurised (undamped operation).
A detailed model-prototype correlation procedure is presented where the full scale prototype behaviour is compared to predictions from both experimental and numerical modelling techniques via a high temporal resolution wave-by-wave reconstruction. This unquestionably provides the definitive verification of the capabilities of such research techniques and facilitates a robust and meaningful uncertainty analysis to be performed on their outputs.
The importance of a good data capture methodology, both in terms of handling and accuracy is also presented. The techniques and procedures implemented by Aquamarine Power for real-time data management are discussed, including lessons learned on the instrumentation and infrastructure required to collect high-value data.

Wave Fields around Wave Energy Converter Arrays

Wave energy converters, by their nature, extract large amounts of energy
from incident waves. If the industry is to progress such that wave energy
becomes a significant provider of power in the future, large wave farms will
be required. Presently, consenting for these sites is a long and problematic
process, mainly due to a lack of knowledge of the potential environmental
impacts. Accurate numerical modelling of the effect of wave energy extraction
on the wave field and subsequent evaluation of changes to coastal
processes is therefore required. Modelling the wave field impact is also
necessary to allow optimum wave farm configurations to be determined.
This thesis addresses the need for more accurate representation of wave
energy converters in numerical models so that the effect on the wave field,
and subsequently the coastal processes, may be evaluated. Using a hybrid
of physical and numerical modelling (MIKE21 BW and SW models) the
effect of energy extraction and operation of a WEC array on the local wave
climate has been determined.
The main outcomes of the thesis are: an improved wave basin facility, in
terms of wave climate homogeneity, reducing the standard deviation of wave
amplitude by up to 50%; experimental measurement of the wave field around
WEC arrays, showing that radiated waves account for a significant proportion
of the wave disturbance; a new representation method of WECs for use
with standard numerical modelling tools, validated against experimental
results.
The methodology and procedures developed here allow subsequent evaluation
of changes to coastal processes and sediment transport due to WEC
arrays.

Investigating Tools used to Analyse the Impact of a Wave Farm on the surrounding Wave Field

For wave energy to become commercially viable, it is predicted that wave energy converters (WECs) will need to be installed in large wave farms. This will required an extensive environmental impact study. Assessments of impacts of these sites requires prior numerical modelling however the available tools have not been fully validated.
This project investigates the area surrounding an array of five scaled WEC models using experimental techniques. It then assesses the suitability of numerical tools to be validated with this experimental data. Validated numerical tools could then be used to predict parameters relating to the models such as reflection and transmission coefficients.
The physical aspect of this project was conducted in the Portaferry wave basin owned by Queen’s University Belfast. The device studied was a bottom hinged oscillating wave surge converter (OWSC) which penetrates the surface (similar to the Oyster device). The models were tested at 40th scale.