A influência do corte com diferentes discos e velocidades na integridade dos espécimes e na resistência adesiva de uma cerâmica a um cimento resinoso dual em ensaio de microtração

Esta pesquisa estudou a influência de diferentes velocidades de corte e marcas de discos diamantados nos valores de resistência adesiva, durante a preparação dos espécimes a serem submetidos à microtração, e na integridade das amostras por meio do microscópio eletrônico de varredura (MEV). Vinte blocos da cerâmica à base de dissilicato de lítio (IPS e.max Press) foram unidos com cimento resinoso (Rely X ARC) a blocos de compósito (Z100), construídos incrementalmente. Foram seguidas as recomendações dos fabricantes no tratamento da superfície da cerâmica e aplicação do cimento resinoso. Após 24 horas em água destilada a 37C, os espécimes foram divididos em dois grupos de discos: marcas Buehler e Extec e subdivididos nas velocidades de 200rpm e 400rpm (B2; E2; B4 e E4, respectivamente). Cada espécime foi cortado em dois eixos perpendiculares para obtenção de palitos com área adesiva de 1,0mm. Para cada condição experimental, os palitos foram separados, aleatoriamente, 15 palitos para análise ao MEV e 30 palitos para serem submetidos à força de tração. As médias de resistência adesiva em MPa foram E4=20,312 ; B4= 24,2 11,3 ; B2= 25,2 9,0 e E2= 28,6 10,4. Na análise estatística, observou-se que os valores de resistência adesiva na velocidade de 200rpm foram significativamente maiores comparados a velocidade de 400rpm, independente do disco empregado. Ao MEV, observou-se melhor integridade dos palitos na velocidade de 200rpm com presença de trincas menos extensas nas bordas externas. Constatou-se também que o disco Extec na velocidade de 400rpm apresentou movimentos excêntricos ao corte e obteve-se maior número de perdas prematuras, uma diminuição significante na média da área total de união (p<0,05), além de diferença significativa nos valores de resistência comparada a velocidade de 200rpm. Concluiu-se que a utilização de diferentes velocidades e sua interação com o disco empregado interfere na integridade dos espécimes e nos valores de resistência adesiva, sendo mais acentuada ao se utilizar o disco da marca Extec.

High-efficiency diffraction gratings in fused silica at the wavelength of 632.8 nm

We describe high-efficiency diffraction gratings fabricated in fused silica at the wavelength of 632.8 nm by rigorous coupled-wave analysis (RCWA). High-density holographic gratings, if the groove density falls within the range of 1575-1630 lines/mm and the groove depth within the range of 1.1-1.3 microns, can realize high diffraction efficiencies at the wavelength of 632.8 nm, e.g., the first Bragg diffraction efficiency can theoretically achieve more than 93% both in TE- and TM-polarized incidences, which greatly reduces the polarization-dependent losses. Note that with different groove profiles further optimized, the maximum efficiency of more than 99.69% can be achieved for TM-polarized incidence, or 97.81% for TE-polarized incidence.

Galveston Bay Migrates to the Web; DSpace Comes to Texas

This presentation describes how the Galveston Bay Bibliography and Galveston Bay Information Center projects transitioned from a paper world to electronic format. The mission of the Galveston Bay Information Center (GBIC) is to serve as a repository for information and a resource for research on Galveston Bay, its watershed, and the coastal region for all members of the Galveston Bay Community. GBIC was created in response to critical losses of data and information that were identified in the early stages of Galveston Bay National Estuary Program and includes a physical collection as well as a bibliography. With the loss of funding imminent, the administrators of GBIC recognized the need to preserve the collection and its digital bibliography in perpetuity. Enter Texas Digital Library. The University’s participation in TDL enabled GBIC to make the Galveston Bay Bibliography more robust and visible to the entire world.

Photonic and Device Design Principles for Ultrahigh-Efficiency (>50%), Spectrum-Splitting Photovoltaics

The sun has the potential to power the Earth's total energy needs, but electricity from solar power still constitutes an extremely small fraction of our power generation because of its high cost relative to traditional energy sources. Therefore, the cost of solar must be reduced to realize a more sustainable future. This can be achieved by significantly increasing the efficiency of modules that convert solar radiation to electricity. In this thesis, we consider several strategies to improve the device and photonic design of solar modules to achieve record, ultrahigh (> 50%) solar module efficiencies. First, we investigate the potential of a new passivation treatment, trioctylphosphine sulfide, to increase the performance of small GaAs solar cells for cheaper and more durable modules. We show that small cells (mm2), which currently have a significant efficiency decrease (~ 5%) compared to larger cells (cm2) because small cells have a higher fraction of recombination-active surface from the sidewalls, can achieve significantly higher efficiencies with effective passivation of the sidewalls. We experimentally validate the passivation qualities of treatment by trioctylphosphine sulfide (TOP:S) through four independent studies and show that this facile treatment can enable efficient small devices. Then, we discuss our efforts toward the design and prototyping of a spectrum-splitting module that employs optical elements to divide the incident spectrum into different color bands, which allows for higher efficiencies than traditional methods. We present a design, the polyhedral specular reflector, that has the potential for > 50% module efficiencies even with realistic losses from combined optics, cell, and electrical models. Prototyping efforts of one of these designs using glass concentrators yields an optical module whose combined spectrum-splitting and concentration should correspond to a record module efficiency of 42%. Finally, we consider how the manipulation of radiatively emitted photons from subcells in multijunction architectures can be used to achieve even higher efficiencies than previously thought, inspiring both optimization of incident and radiatively emitted photons for future high efficiency designs. In this thesis work, we explore novel device and photonic designs that represent a significant departure from current solar cell manufacturing techniques and ultimately show the potential for much higher solar cell efficiencies.

A multiple scattering problem

The present work deals with the problem of the interaction of the electromagnetic radiation with a statistical distribution of nonmagnetic dielectric particles immersed in an infinite homogeneous isotropic, non-magnetic medium. The wavelength of the incident radiation can be less, equal or greater than the linear dimension of a particle. The distance between any two particles is several wavelengths. A single particle in the absence of the others is assumed to scatter like a Rayleigh-Gans particle, i.e. interaction between the volume elements (self-interaction) is neglected. The interaction of the particles is taken into account (multiple scattering) and conditions are set up for the case of a lossless medium which guarantee that the multiple scattering contribution is more important than the self-interaction one. These conditions relate the wavelength λ and the linear dimensions of a particle a and of the region occupied by the particles D. It is found that for constant λ/a, D is proportional to λ and that |Δχ|, where Δχ is the difference in the dielectric susceptibilities between particle and medium, has to lie within a certain range.

The total scattering field is obtained as a series the several terms of which represent the corresponding multiple scattering orders. The first term is a single scattering term. The ensemble average of the total scattering intensity is then obtained as a series which does not involve terms due to products between terms of different orders. Thus the waves corresponding to different orders are independent and their Stokes parameters add.

The second and third order intensity terms are explicitly computed. The method used suggests a general approach for computing any order. It is found that in general the first order scattering intensity pattern (or phase function) peaks in the forward direction Θ = 0. The second order tends to smooth out the pattern giving a maximum in the Θ = π/2 direction and minima in the Θ = 0 , Θ = π directions. This ceases to be true if ka (where k = 2π/λ) becomes large (> 20). For large ka the forward direction is further enhanced. Similar features are expected from the higher orders even though the critical value of ka may increase with the order.

The first order polarization of the scattered wave is determined. The ensemble average of the Stokes parameters of the scattered wave is explicitly computed for the second order. A similar method can be applied for any order. It is found that the polarization of the scattered wave depends on the polarization of the incident wave. If the latter is elliptically polarized then the first order scattered wave is elliptically polarized, but in the Θ = π/2 direction is linearly polarized. If the incident wave is circularly polarized the first order scattered wave is elliptically polarized except for the directions Θ = π/2 (linearly polarized) and Θ = 0, π (circularly polarized). The handedness of the Θ = 0 wave is the same as that of the incident whereas the handedness of the Θ = π wave is opposite. If the incident wave is linearly polarized the first order scattered wave is also linearly polarized. The second order makes the total scattered wave to be elliptically polarized for any Θ no matter what the incident wave is. However, the handedness of the total scattered wave is not altered by the second order. Higher orders have similar effects as the second order.

If the medium is lossy the general approach employed for the lossless case is still valid. Only the algebra increases in complexity. It is found that the results of the lossless case are insensitive in the first order of k_imD where k_im = imaginary part of the wave vector k and D a linear characteristic dimension of the region occupied by the particles. Thus moderately extended regions and small losses make (k_imD)² ≪ 1 and the lossy character of the medium does not alter the results of the lossless case. In general the presence of the losses tends to reduce the forward scattering.

Polarizing beam splitter of deep-etched triangular-groove fused-silica gratings

We investigated the use of a deep-etched fused-silica grating with triangular-shaped grooves as a highly efficient polarizing beam splitter (PBS). A triangular-groove PBS grating is designed at a wavelength of 1550 nm to be used in optical communication. When it is illuminated in Littrow mounting, the transmitted TE- and TM-polarized waves are mainly diffracted in the minus-first and zeroth orders, respectively. The design condition is based on the average differences of the grating mode indices, which is verified by using rigorous coupled-wave analysis. The designed PBS grating is highly efficient over the C+L band range for both TE and TM polarizations (> 97.68 %). It is shown that such a triangular-groove PBS grating can exhibit a higher diffraction efficiency, a larger extinction ratio, and less reflection loss than the binary-phase fused-silica PBS grating. (C) 2008 Optical Society of America.

A potential approach to claims problems

Hart and Mas Colell (1989) introduce the potential function for cooperative TU games. In this paper, we extend this approach to claims problems, also known as bankruptcy or rationing problems. We show that for appropriate subproblems, the random arrival rule, the rules in the TAL-family (which include the uniform gains rule, the uniform losses rule and the Talmud rule), the minimal overlap rule, and the proportional rule admit a potential. We also study the balanced contributions property for these rules. By means of a potential, we introduce a generalization of the random arrival rule and mixtures of the minimal overlap rule and the uniform losses rule.

Structural Design under Seismic Risk Using Multiple Performance Objectives

Structural design is a decision-making process in which a wide spectrum of requirements, expectations, and concerns needs to be properly addressed. Engineering design criteria are considered together with societal and client preferences, and most of these design objectives are affected by the uncertainties surrounding a design. Therefore, realistic design frameworks must be able to handle multiple performance objectives and incorporate uncertainties from numerous sources into the process.

In this study, a multi-criteria based design framework for structural design under seismic risk is explored. The emphasis is on reliability-based performance objectives and their interaction with economic objectives. The framework has analysis, evaluation, and revision stages. In the probabilistic response analysis, seismic loading uncertainties as well as modeling uncertainties are incorporated. For evaluation, two approaches are suggested: one based on preference aggregation and the other based on socio-economics. Both implementations of the general framework are illustrated with simple but informative design examples to explore the basic features of the framework.

The first approach uses concepts similar to those found in multi-criteria decision theory, and directly combines reliability-based objectives with others. This approach is implemented in a single-stage design procedure. In the socio-economics based approach, a two-stage design procedure is recommended in which societal preferences are treated through reliability-based engineering performance measures, but emphasis is also given to economic objectives because these are especially important to the structural designer's client. A rational net asset value formulation including losses from uncertain future earthquakes is used to assess the economic performance of a design. A recently developed assembly-based vulnerability analysis is incorporated into the loss estimation.

The presented performance-based design framework allows investigation of various design issues and their impact on a structural design. It is a flexible one that readily allows incorporation of new methods and concepts in seismic hazard specification, structural analysis, and loss estimation.

NEW METHODOLOGY FOR FEEDER RECONFIGURATION IN DISTRIBUTION NETWORKS WITH DISTRIBUTED ENERGY RESOURCES

This doctoral Thesis defines and develops a new methodology for feeder reconfiguration in distribution networks with Distributed Energy Resources (DER). The proposed methodology is based on metaheuristic Ant Colony Optimization (ACO) algorithms. The methodology is called Item Oriented Ant System (IOAS) and the doctoral Thesis also defines three variations of the original methodology, Item Oriented Ant Colony System (IOACS), Item Oriented Max-min Ant System (IOMMAS) y Item Oriented Max-min Ant Colony System (IOACS). All methodologies pursue a twofold objective, to minimize the power losses and maximize DER penetration in distribution networks. The aim of the variations is to find the algorithm that adapts better to the present optimization problem, solving it most efficiently. The main feature of the methodology lies in the fact that the heuristic information and the exploitation information (pheromone) are attached to the item not to the path. Besides, the doctoral Thesis proposes to use feeder reconfiguration in order to increase the distribution network capacity of accepting a major degree of DER. The proposed methodology and its three variations have been tested and verified in two distribution networks well documented in the existing bibliography. These networks have been modeled and used to test all proposed methodologies for different scenarios with various DER penetration degrees.

Envolvimento cardíaco e pulmonar na esquistossomose aguda e crônica de camundongos alimentados com dieta hiperlipídica

O objetivo desse trabalho foi avaliar as alterações no tecido cardíaco e pulmonar de camundongos dislipidêmicos, esquistossomóticos e seus controles que haviam sido eutanasiados com 9 (fase aguda) e 17 (fase crônica) semanas de infecção. Foram estudados quatro grupos de camundongos, segundo a dieta e tempo de infecção: dieta padrão (SCa e SCc), dieta hiperlipídica (HFCa e HFCc), dieta padrão infectados (ISCa e ISCc) e dieta hiperlipídica infectados (IHFCa e IHFCc). O coração e o pulmão foram retirados, seccionados e os fragmentos foram submetidos a processamento histológico e corados com Hematoxilina e Eosina e Picrosirius red. Foram realizadas análises histopatológicas dos dois órgãos, além de estudos estereológico (dissector óptico) e morfométrico (vasos, cardiomiócitos e quantificação de colágeno) do coração. Os grupos foram comparados pelos Testes T de Student e/ou ANOVA. Todos os animais com dieta hiperlipídica, infectados ou não, apresentaram menor densidade de número e número total de cardiomiócitos (p<0,05), além de vasos intramiocárdicos com lúmen mais reduzido e paredes mais espessas que os controles, independente da semana em que foram eutanasiados. Os cardiomiócitos dos grupos IHFCa e IHFCc estavam mais hiperplásicos (p<0,0001) e continham mais colágeno ao redor (p<0,05) que os dos demais grupos estudados. Os corações dos grupos IHFC, nas duas fases, apresentaram maior quantidade de nichos inflamatórios, inúmeras regiões contendo coagulação de fibras cardíacas, maior número de áreas com desaparecimento de fibras e proliferação de fibroblastos quando comparados aos grupos ISC. Os pulmões de camundongos do grupo IHFCc apresentaram aumento do número de reações granulomatosas e infiltrados perivasculares quando comparados aos demais grupos infectados. Esses dados sugerem que a infecção por S. mansoni causa danos às estruturas miocárdica e pulmonar que se intensificam com a interação com a dieta rica em lipídios.

Stability analysis of RF amplifiers based on MIMO pole-zero identification

Spurious oscillations are one of the principal issues faced by microwave and RF circuit designers. The rigorous detection of instabilities or the characterization of measured spurious oscillations is still an ongoing challenge. This project aims to create a new stability analysis CAD program that tackles this chal- lenge. Multiple Input Multiple Output (MIMO) pole-zero identification analysis is introduced on the program as a way to create new methods to automate the stability analysis process and to help designers comprehend the obtained results and prevent incorrect interpretations. The MIMO nature of the analysis contributes to eliminate possible controllability and observability losses and helps differentiate mathematical and physical quasi-cancellations, products of overmodeling. The created program reads Single Input Single Output (SISO) or MIMO frequency response data, and determines the corresponding continuous transfer functions with Vector Fitting. Once the transfer function is calculated, the corresponding pole/zero diagram is mapped enabling the designers to analyze the stability of an amplifier. Three data processing methods are introduced, two of which consist of pole/zero elimina- tions and the latter one on determining the critical nodes of an amplifier. The first pole/zero elimination method is based on eliminating non resonant poles, whilst the second method eliminates the poles with small residue by assuming that their effect on the dynamics of a system is small or non-existent. The critical node detection is also based on the residues; the node at which the effect of a pole on the dynamics is highest is defined as the critical node. In order to evaluate and check the efficiency of the created program, it is compared via examples with another existing commercial stability analysis tool (STAN tool). In this report, the newly created tool is proved to be as rigorous as STAN for detecting instabilities. Additionally, it is determined that the MIMO analysis is a very profitable addition to stability analysis, since it helps to eliminate possible problems of loss of controllability, observability and overmodeling.

掺稀土离子液体激光器的研究进展

综合介绍了掺稀土离子液体激光器的主要发展历程，分析了掺稀土离子液体激光材料研究过程中需要解决的主要问题包括降低无辐射跃迁、增大溶解度和减少热致折射率梯度引起的光偏折损耗等。重点介绍了稀土离子在溶液中的无辐射跃迁机理以及降低无辐射跃迁的措施。

Modelagem hidrológica da bacia hidrográfica do rio Bengalas, Nova Friburgo, RJ, utilizando o potencial de geotecnologias na definição de áreas de risco de inundação.

A presente pesquisa concentra-se no estudo hidrológico utilizando o potencial das geotecnologias na modelagem do escoamento na bacia do rio Bengalas, cujo rio principal de mesmo nome, corta o município de Nova Friburgo, RJ, no sentido Sul-Norte. Esse município, um dos mais importantes da região serrana, sofre frequentemente com inundações e deslizamentos, onde, dados históricos e acontecimentos recentes mostram que a ocupação inadequada de encostas e calhas dos rios são as áreas destacada e negativamente afetadas. A metodologia tem suporte no uso de um SIG, extraindo informações, que por sua vez, serão entrada de dados na fase de modelagem, e reforçando a apresentação dos resultados das simulações através de mapas. Ela está divida basicamente em três etapas: "SIG", "Modelagem" e "Suporte à Tomada de Decisão/Simulação". Esse primeiro estudo permitiu compor um banco de dados geográfico com as características fisiográficas da bacia; a seleção criteriosa de uma modelagem matemática e encadeamento de seus parâmetros com os componentes do ciclo hidrológico; realizar a calibração do modelo de transformação chuva-vazão, Soil Conservation Service (CN); e simular a passagem dos volumes gerados pela precipitação efetiva na calha do rio Bengalas, com o objetivo de identificar e analisar as áreas suscetíveis a inundações na porção central da cidade de Nova Friburgo. Modelagem dessa natureza vem sendo empregada, principalmente, no gerenciamento de recursos hídricos, onde a tomada de decisões embasada nos resultados de simulações computacionais, contribuem para evitar prejuízos materiais e financeiros, e ainda, perdas de vidas humanas em áreas de risco, neste caso, aquelas suscetíveis a inundações. Analisando os resultados encontrados temos que a área suscetível à inundação para uma chuva com tempo de recorrência de 50 anos, o mais crítico estudado, seja de aproximadamente 1,0 km, distribuídos nos seus 8,5km na região central de Nova Friburgo-RJ, sendo está, ora delimitada, prioritariamente edificada.

Avaliação do copolímero de acrilonitrila e 2-vinil-2-oxazolina na eficiência de inibição de corrosão química em meio salino

Processos corrosivos geram perdas incalculáveis para a sociedade. Existe, portanto, uma incessante busca por métodos cada vez mais econômicos, eficientes e que não gerem impacto ao meio-ambiente. Polímeros heterocíclicos são macromoléculas de elevada performance que vêm sendo estudados como inibidores de corrosão por atenderem as premissas citadas acima. Neste trabalho realizou-se a modificação química da poliacrilonitrila com a incorporação de grupos 2-vinil-2-oxazolina no teor teórico de 20%. O copolímero obtido e a poliacrilonitrila não modificada foram caracterizados por espectroscopia na região do infravermelho e avaliados como inibidores de corrosão para alumínio e aço carbono em meio salino em temperatura de 60C. As concentrações utilizadas foram de 20, 50, 100 e 200 ppm e os períodos de checagem: 1, 2, 3 e 4 semanas. Os polímeros estudados apresentaram atividade inibitória de corrosão apenas para o aço carbono. Para o alumínio, o ensaio em branco apresentou a menor taxa de corrosão dentre todos os ensaios realizados

Intervenções psicossociais para Transtornos Mentais Comuns na Atenção Primária à Saúde.

Os Transtornos Mentais Comuns (TMC), especialmente ansiedade e depressão, são altamente prevalentes, independentemente das dificuldades com a sua classificação. Na Atenção Primária à Saúde (APS), representada no Brasil pela Estratégia de Saúde da Família (ESF), essas condições são pouco detectadas e tratadas, o que resulta em sobrecarga para pacientes, famílias e comunidades, além de prejuízos sociais e econômicos. Tal situação pode ser atenuada integrando-se cuidados de saúde mental à atenção básica. Nesse sentido, objetivou-se identificar e analisar as intervenções psicossociais voltadas para o cuidado do sofrimento psíquico e dos TMC atualmente empregadas na APS, no Brasil e no exterior. Para isso, foi realizada uma revisão bibliográfica da literatura nacional e internacional através das bases de dados MEDLINE/PubMed e LILACS/BVS. As intervenções identificadas foram reunidas em dois grupos. No primeiro, incluíram-se as intervenções com formato tradicional em que um profissional graduado conduz o tratamento presencialmente, enquanto no segundo grupo foram alocados os arranjos diferenciados em que o contato com o profissional é reduzido e seu papel é mais o de facilitar do que de liderar o tratamento, tal como nas intervenções com o uso de mão de obra leiga em saúde, suporte ao autocuidado, e sistemas automatizados ou pacotes de tratamento informatizados oferecidos via internet. Teoricamente, Terapia Interpessoal, Terapia Cognitivo-comportamental e Terapia de Solução de Problemas embasaram as intervenções. Na APS internacional, as intervenções são breves e bastante estruturadas, incluindo um plano de ação definido em um manual de aplicação. Na Estratégia de Saúde da Família destacaram-se as intervenções grupais e a Terapia Comunitária, modelo especialmente desenvolvido por brasileiros. Verificou-se que os TMC ganham visibilidade à medida que a APS se consolida no território e próxima à população. No exterior, a integração da saúde mental na APS é um processo em consolidação e há crescente tecnificação das intervenções psicossociais, enquanto, no Brasil, a aproximação da APS com a ESF é recente e não há um padrão de atuação consolidado. Resultados insuficientes ou controversos impediram concluir quais são as melhores intervenções, porém a alta prevalência dos TMC e o potencial de cuidado do setor da APS exigem que as pesquisas continuem.