Synthesis of an antibody-like material for the detection of Albumin

6th Graduate Student Symposium on Molecular Imprinting

A novel antibody-like material for breast cancer antigen CA15-3, used to track breast cancer by potentiometric transduction

This work presents the development of a low cost sensor device for the diagnosis of breast cancer in point-of-care, made with new synthetic biomimetic materials inside plasticized poly(vinyl chloride), PVC, membranes, for subsequent potentiometric detection. This concept was applied to target a conventional biomarker in breast cancer: Breast Cancer Antigen (CA15-3). The new biomimetic material was obtained by molecularly-imprinted technology. In this, a plastic antibody was obtained by polymerizing around the biomarker that acted as an obstacle to the growth of the polymeric matrix. The imprinted polymer was specifically synthetized by electropolymerization on an FTO conductive glass, by using cyclic voltammetry, including 40 cycles within -0.2 and 1.0 V. The reaction used for the polymerization included monomer (pyrrol, 5.0×10-3 mol/L) and protein (CA15-3, 100U/mL), all prepared in phosphate buffer saline (PBS), with a pH of 7.2 and 1% of ethylene glycol. The biomarker was removed from the imprinted sites by proteolytic action of proteinase K. The biomimetic material was employed in the construction of potentiometric sensors and tested with regard to its affinity and selectivity for binding CA15-3, by checking the analytical performance of the obtained electrodes. For this purpose, the biomimetic material was dispersed in plasticized PVC membranes, including or not a lipophilic ionic additive, and applied on a solid conductive support of graphite. The analytical behaviour was evaluated in buffer and in synthetic serum, with regard to linear range, limit of detection, repeatability, and reproducibility. This antibody-like material was tested in synthetic serum, and good results were obtained. The best devices were able to detect 5 times less CA15-3 than that required in clinical use. Selectivity assays were also performed, showing that the various serum components did not interfere with this biomarker. Overall, the potentiometric-based methods showed several advantages compared to other methods reported in the literature. The analytical process was simple, providing fast responses for a reduced amount of analyte, with low cost and feasible miniaturization. It also allowed the detection of a wide range of concentrations, diminishing the required efforts in previous sample pre-treating stages.

Leishmaniose Cutânea Causada por Leishmania Infantum Zimodeme Mon-1 em Portugal

Leishmania infantum zimodeme MON-1 foi isolado a partir de uma lesão cutânea da face de uma criança, residente em Lisboa e que nunca saíu do país. Após biópsia excisional não houve recorrência da lesão. Este é o primeiro caso em que este agente é identificado como responsável pela leishmaniose cutãnea em Portugal.

Three-Dimensional Contrast-Enhanced Magnetic Resonance Pulmonary Angiography in the Study of Pulmonary Vascular Pathology

OBJECTIVES: To assess the feasibility of performing pulmonary angiography using MRI with contrast enhancement in patients with pulmonary vascular disease. METHODS: We present our experience in ten individuals, two controls and eight patients who underwent the exam after injection of a gadolinium-based contrast agent on a 1 Tesla MR scanner using a time-of-flight sequence and breath-holding during injection of contrast. RESULTS: Pathology in the main pulmonary artery and its major branches was detected easily while resolution at the segmental and subsegmental levels was inadequate. CONCLUSION: Contrast-enhanced magnetic resonance pulmonary angiography is feasible on a 1 Tesla MR scanner for the study of pathology of the main pulmonary artery and its major branches, like massive pulmonary embolism. However its ability to detect and define distal vessel pathology as found in chronic thromboembolic pulmonary hypertension and small pulmonary emboli is limited.

Human vaccinia-like virus outbreaks in São Paulo and Goiás States, Brazil: virus detection, isolation and identification

Since October 2001, the Adolfo Lutz Institute has been receiving vesicular fluids and scab specimens of patients from Paraíba Valley region in the São Paulo and Minas Gerais States and from São Patricio Valley, in the Goiás State. Epidemiological data suggested that the outbreaks were caused by Cowpox virus or Vaccinia virus. Most of the patients are dairy milkers that had vesiculo-pustular lesions on the hands, arms, forearms, and some of them, on the face. Virus particles with orthopoxvirus morphology were detected by direct electron microscopy (DEM) in samples of 49 (66.21%) patients of a total of 74 analyzed. Viruses were isolated in Vero cell culture and on chorioallantoic membrane (CAM) of embryonated chicken eggs. Among 21 samples submitted to PCR using primers for hemagglutinin (HA) gene, 19 were positive. Restriction digestion with TaqI resulted in four characteristic Vaccinia virus fragments. HA nucleotide sequences showed 99.9% similarity with Cantagalo virus, described as a strain of Vaccinia virus. The only difference observed was the substitution of one nucleotide in the position 616 leading to change in one amino acid of the protein in the position 206. The phylogenetic analysis showed that the isolates clustered together with Cantagalo virus, other Vaccinia strains and Rabbitpox virus.

Single step polymerase chain reaction (PCR) for the diagnosis of the Leishmania (Viannia) subgenus

In Brazil, the main etiologic agent of Leishmaniasis that frequently presents with mucosal involvement belongs to the Viannia subgenus. The therapeutic conduct in this disease depends on the parasitological diagnosis, and classical methods are restricted in identifying the agent. In this paper we describe a polymerase chain reaction (PCR), which uses primers designed from mini-exons repetitive sequences. The PCR amplifies a 177bp fragment that can distinguish (Viannia) from (Leishmania) subgenus. This test could be a useful diagnostic tool.

Modeling and Control of a Dragonfly-Like Robot

Dragonflies demonstrate unique and superior flight performances than most of the other insect species and birds. They are equipped with two pairs of independently controlled wings granting an unmatchable flying performance and robustness. In this paper it is studied the dynamics of a dragonfly-inspired robot. The system performance is analyzed in terms of time response and robustness. The development of computational simulation based on the dynamics of the robotic dragonfly allows the test of different control algorithms. We study different movement, the dynamics and the level of dexterity in wing motion of the dragonfly. The results are positive for the construction of flying platforms that effectively mimic the kinematics and dynamics of dragonflies and potentially exhibit superior flight performance than existing flying platforms.

The histopathology of cutaneous leishmaniasis due to Leishmania (Leishmania) mexicana in the Yucatan peninsula, Mexico

Localized Cutaneous Leishmaniasis (LCL) known as "chiclero's ulcer" in southeast Mexico, was described by SEIDELIN in 1912. Since then the sylvatic region of the Yucatan peninsula has been documented as an endemic focus of LCL. This study of 73 biopsies from parasitological confirmed lesions of LCL cases of Leishmania (Leishmania) mexicana infection was undertaken: 1) to examine host response at tissue level; and 2) to relate manifestations of this response to some characteristics of clinical presentation. Based on Magalhães' classification we found that the most common pattern in our LCL cases caused by L. (L.) mexicana was predominantly characterized by the presence of unorganized granuloma without necrosis, (43.8%). Another important finding to be highlighted is the fact that in 50/73 (68.5%) parasite identification was positive. There was direct relation between the size of the lesion and time of evolution (r s = 0.3079, p = 0.03), and inverse correlation between size of the lesion and abundance of amastigotes (r s = -0.2467, p = 0.03). In view of the complexity of clinical and histopathological findings, cell-mediated immune response of the disease related to clinical and histopathological features, as so genetic background should be studied.

Fractional Dynamics in Forest Fires

Every year forest fires consume large areas, being a major concern in many countries like Australia, United States and Mediterranean Basin European Countries (e.g., Portugal, Spain, Italy and Greece). Understanding patterns of such events, in terms of size and spatiotemporal distributions, may help to take measures beforehand in view of possible hazards and decide strategies of fire prevention, detection and suppression. Traditional statistical tools have been used to study forest fires. Nevertheless, those tools might not be able to capture the main features of fires complex dynamics and to model fire behaviour [1]. Forest fires size-frequency distributions unveil long range correlations and long memory characteristics, which are typical of fractional order systems [2]. Those complex correlations are characterized by self-similarity and absence of characteristic length-scale, meaning that forest fires exhibit power-law (PL) behaviour. Forest fires have also been proved to exhibit time-clustering phenomena, with timescales of the order of few days [3]. In this paper, we study forest fires in the perspective of dynamical systems and fractional calculus (FC). Public domain forest fires catalogues, containing data of events occurred in Portugal, in the period 1980 up to 2011, are considered. The data is analysed in an annual basis, modelling the occurrences as sequences of Dirac impulses. The frequency spectra of such signals are determined using Fourier transforms, and approximated through PL trendlines. The PL parameters are then used to unveil the fractional-order dynamics characteristics of the data. To complement the analysis, correlation indices are used to compare and find possible relationships among the data. It is shown that the used approach can be useful to expose hidden patterns not captured by traditional tools.

Ball Sensing in a Leg Like Robotic Kicker

The trend to have more cooperative play and the increase of game dynamics in Robocup MSL League motivates the improvement of skills for ball passing and reception. Currently the majority of the MSL teams uses ball handling devices with rollers to have more precise kicks but limiting the capability to kick a moving ball without stopping it and grabbing it. This paper addresses the problem to receive and kick a fast moving ball without having to grab it with a roller based ball handling device. Here, the main difficulty is the high latency and low rate of the measurements of the ball sensing systems, based in vision or laser scanner sensors.Our robots use a geared leg coupled to a motor that acts simultaneously as the kicking device and low level ball sensor. This paper proposes a new method to improve the capability for ball sensing in the kicker, by combining high rate measurements from the torque and energy in the motor and angular position of the kicker leg. The developed method endows the kicker device with an effective ball detection ability, validated in several game situations like in an interception to a fast pass or when chasing the ball where the relative speed from robot to ball is low. This can be used to optimize the kick instant or by the embedded kicker control system to absorb the ball energy.

Application of Visual-Inertial SLAM for 3D Mapping of Underground Environments

The underground scenarios are one of the most challenging environments for accurate and precise 3d mapping where hostile conditions like absence of Global Positioning Systems, extreme lighting variations and geometrically smooth surfaces may be expected. So far, the state-of-the-art methods in underground modelling remain restricted to environments in which pronounced geometric features are abundant. This limitation is a consequence of the scan matching algorithms used to solve the localization and registration problems. This paper contributes to the expansion of the modelling capabilities to structures characterized by uniform geometry and smooth surfaces, as is the case of road and train tunnels. To achieve that, we combine some state of the art techniques from mobile robotics, and propose a method for 6DOF platform positioning in such scenarios, that is latter used for the environment modelling. A visual monocular Simultaneous Localization and Mapping (MonoSLAM) approach based on the Extended Kalman Filter (EKF), complemented by the introduction of inertial measurements in the prediction step, allows our system to localize himself over long distances, using exclusively sensors carried on board a mobile platform. By feeding the Extended Kalman Filter with inertial data we were able to overcome the major problem related with MonoSLAM implementations, known as scale factor ambiguity. Despite extreme lighting variations, reliable visual features were extracted through the SIFT algorithm, and inserted directly in the EKF mechanism according to the Inverse Depth Parametrization. Through the 1-Point RANSAC (Random Sample Consensus) wrong frame-to-frame feature matches were rejected. The developed method was tested based on a dataset acquired inside a road tunnel and the navigation results compared with a ground truth obtained by post-processing a high grade Inertial Navigation System and L1/L2 RTK-GPS measurements acquired outside the tunnel. Results from the localization strategy are presented and analyzed.

Estudo dos flebótomos (Diptera, Phlebotominae), vectores de Leishmania sp. No Concelho de Torres Novas, Portugal

Estudo dos flebótomos (Diptera, Phlebotominae), vectores de Leishmania sp. no Concelho de Torres Novas, Portugal. Sofia Isabel Martins Branco PALAVRAS-CHAVE: flebótomos, bioecologia, Leishmania, Torres Novas, Portugal. Os flebótomos são insectos vectores de vários agentes patogénicos, dos quais se destacam os protozoários do Género Leishmania. Em Portugal, as leishmanioses, canina e humana, são causadas por L. infantum, sendo o cão o principal reservatório e Phlebotomus perniciosus e P. ariasi os vectores comprovados do parasita. São conhecidos três focos de doença, mas casos de leishmaniose canina têm sido reportados em outras regiões nas quais se desconhecem as espécies flebotomínicas presentes e respectivas taxas de infecção. Neste trabalho, efectuou-se a primeira prospecção flebotomínica no Concelho de Torres Novas, Distrito de Santarém, localizado na região Centro de Portugal. Os principais objectivos foram determinar a fauna flebotomínica do Concelho, os aspectos bioecológicos, as taxas de infecção por Leishmania e os factores de risco para a transmissão vectorial. De Junho a Novembro de 2010, 275 biótopos foram prospectados com armadilhas CDC. As capturas foram realizadas em 91 localidades, nas 17 freguesias do Concelho, e incluíram habitats domésticos, peridomésticos e silváticos. Os exemplares capturados foram identificados morfologicamente, as fêmeas utilizadas para detecção molecular de DNA de Leishmania e identificação das refeições sanguíneas. Análises de regressão simples e múltipla foram utilizadas para avaliação dos factores de risco para a presença das várias espécies flebotomínicas. Testes não paramétricos foram usados para comparar densidades. Dos 1262 flebótomos capturados, quatro espécies foram assinaladas com as seguintes abundâncias relativas: P. perniciosus 73,69%, P. ariasi 8,16%, P. sergenti 6,58% e Sergentomyia minuta 11,57%. Em 82% das localidades prospectadas foi detectada pelo menos uma espécie flebotomínica e em 71,4% destas foi capturada pelo menos uma das espécies comprovadamente vectoras de L. infantum. P. perniciosus foi assinalado em todas as 17 freguesias do Concelho. Os factores de risco identificados foram: temperaturas elevadas e humidades relativas baixas, locais abrigados e ausência de vento forte, presença de pinheiros como vegetação dominante, biótopos peridomésticos, particularmente currais de ovelhas e coelheiras, ou na proximidade de ovelhas, aves de capoeira e ninhos com andorinhas. A taxa de infecção flebotomínica por L. infantum foi de 4% para P. ariasi e de 0,32% para o total de fêmeas capturadas. A maioria das fêmeas para as quais se identificou a origem da refeição sanguínea pertencia a P. perniciosus. Esta espécie apresentou um comportamento oportunista, alimentando-se numa grande variedade de hospedeiros vertebrados. A elevada abundância e distribuição das espécies vectoras, juntamente com a seroprevalência de Leishmania nos cães do Distrito (5-10%), e a captura de uma fêmea grávida de P. ariasi (infectante), sugerem que o Concelho de Torres Novas é um foco de leishmaniose no país. A maior abundância relativa de P. sergenti, comparando com prospecções realizadas noutras áreas da região Centro de Portugal, sugere que este potencial vector esteja a expandir-se para latitudes mais elevadas, aumentando o risco de introdução de L. tropica no território, por contacto com imigrantes ou viajantes infectados de áreas endémicas. A monitorização flebotomínica, e dos hospedeiros vertebrados, deverá ser continuada no Concelho para que medidas eficazes de controlo possam ser definidas e implementadas.

Reproduction of Leishmania (Leishmania ) infantum chagasi in conditioned cell culture growth medium

Leishmanias can be produced by inoculation in conditioned McCoy cell culture growth medium (CGM). Leishmania (Leishmania) infantum chagasi (100 parasites) grown in NNN medium was inoculated in 2.5 mL CGM, kept in plates (24 wells) and its multiplication was observed for five days (120 hours). After day 5, the medium was saturated with the flagellate forms of the parasite (promastigotes). The reproduction of the leishmanias was observed every 24 hours and the number of parasites was calculated by counting the parasites in a drop of 10 µ L and photomicrographied. So the number of Leishmanias was adjusted to 1 mL volume. The advantage of the technique by isolation of Leishmania in CGM demonstrated in this study is its low cost and high efficacy even with a small quantity of parasites (10² promastigotes) used as inoculum. Additionally, isolation of the leishmania can be obtained together with an increase in their density (180 times) as observed by growth kinetics, within a shorter time. These results justify the use of this low-cost technique for the isolation and investigation of the behavior and multiplication of Leishmania both in vertebrates and invertebrates, besides offering means of obtaining antigens, whether whole antigens (leishmanias) or the soluble antigens produced by the parasites which may be useful for the production of new diagnostic kits.

Presence of Leishmania amastigotes in peritoneal fluid of a dog with leishmaniasis from Alagoas, Northeast Brazil

The goal of this short communication is to report the uncommon presence of intracellular amastigotes of Leishmania in peritoneal fluid of a dog with leishmaniasis from Alagoas State, Brazil. Physical examination of an adult male rottweiler suspected to be suffering of leishmaniasis revealed severe loss of weight, ascitis, splenomegaly, moderately enlarged lymph nodes, onychogryphosis, generalized alopecia, skin ulcers on the posterior limbs, and conjunctivitis. Samples of bone marrow, popliteal lymph node, skin ulcer, and peritoneal fluid were collected and smears of each sample were prepared and stained with hematoxylin and eosin. Numerous amastigotes were detected in bone marrow, popliteal lymph node, and skin ulcer smears. Smears of peritoneal fluid revealed the unusual presence of several free and intracellular amastigotes of Leishmania. Future studies are needed to determine whether the cytology of ascitic fluid represents a useful tool for diagnosis Leishmania infection in ascitic dogs, particularly in those living in areas where canine leishmaniasis is enzootic.

Detection of Arah1 (a major peanut allergen) in food using an electrochemical gold nanoparticle-coated screen-printed immunosensor

A gold nanoparticle-coated screen-printed carbon electrode was used as the transducer in the development of an electrochemical immunosensor for Ara h 1 (a major peanut allergen) detection in food samples. Gold nanoparticles (average diameter=32 nm) were electrochemically generated on the surface of screen-printed carbon electrodes. Two monoclonal antibodies were used in a sandwich-type immunoassay and the antibody–antigen interaction was electrochemically detected through stripping analysis of enzymatically (using alkaline phosphatase) deposited silver. The total time of the optimized immunoassay was 3 h 50 min. The developed immunosensor allowed the quantification of Ara h 1 between 12.6 and 2000 ng/ml, with a limit of detection of 3.8 ng/ml, and provided precise (RSD <8.7%) and accurate (recovery >96.6%) results. The immunosensor was successfully applied to the analysis of complex food matrices (cookies and chocolate), being able to detect Ara h 1 in samples containing 0.1% of peanut.