Use of low-level plasma for enhancing the shrink resistance of wool fabric treated with a silicone polymer

This study examines the effects of an atmospheric pressure plasma (APP) pre-treatment on the shrink resistance of wool fabric treated subsequently, by the pad/dry method, with an aqueous emulsion of the amino-functional polydimethylsiloxane, SM 8709. Optimal shrink resistance (with no impairment of fabric handle) was obtained after a low-level plasma treatment (1-3 s exposure time), using 5% of the polymer emulsion. Higher levels of silicone polymer could be used to achieve shrink resistance in the absence of a plasma pre-treatment, but the fabric handle would be adversely affected. X-ray photoelectron spectroscopy (XPS) studies showed that the bulk of the covalently bound surface lipid layer was removed after a plasma exposure time of 30 s. For treatment times of 3 s or less, however, the removal was incomplete, suggesting that optimum shrink resistance (after treatment with the silicone polymer) was associated with the modification of the surface layer rather than its complete destruction. Scanning electron micrographs (SEMs) revealed that the plasma pre-treatment did not lead to any physical modifications (such as smoothening of the scale edges), even for long exposure times, and had no significant impact on the extent or nature of the inter-fibre bonding of the polymer. Confocal microscopy showed uniform spread of polymer on single fibres. It is concluded that the main impact of the plasma pre-treatment was to enhance the distribution of polymer both on and between fibres and to improve adhesion of polymer to the fibre.

A validity-driven approach to the understanding of the personal and societal burden of low back pain : development of a conceptual and measurement model

Introduction: While the importance and magnitude of the burden of low back pain upon the individual is well recognized, a systematic understanding of the impact of the condition on individuals is currently hampered by the lack of an organized understanding of what aspects of a person’s life are affected and the lack of comprehensive measures for these effects. The aim of the present study was to develop a conceptual and measurement model of the overall burden of low back pain from the individual’s perspective using a validity-driven approach.
Methods: To define the breadth of low back pain burden we conducted three concept-mapping workshops to generate an item pool. Two face-to-face workshops (Australia) were conducted with people with low back pain and clinicians and policy-makers, respectively. A third workshop (USA) was held with international multidisciplinary experts. Multidimensional scaling, cluster analysis, participant input and thematic analyses organized participants’ ideas into clusters of ideas that then informed the conceptual model.
Results: One hundred and ninety-nine statements were generated. Considerable overlap was observed between groups, and four major clusters were observed - Psychosocial, Physical, Treatment and Employment - each with between two and six subclusters. Content analysis revealed that elements of the Psychosocial cluster were sufficiently distinct to be split into Psychological and Social, and a further cluster of elements termed Positive Effects also emerged. Finally, a hypothesized structure was proposed with six domains and 16 subdomains. New domains not previously considered in the back pain field emerged for psychometric verification: loss of independence, worry about the future, and negative or discriminatory actions by others.
Conclusions: Using a grounded approach, an explicit a priori and testable model of the overall burden of low back pain has been proposed that captures the full breadth of the burden experienced by patients and observed by experts.

Effects of continuity of care by a primary midwife (caseload midwifery) on caesarean section rates in women of low obstetric risk : the COSMOS randomised controlled trial

Objective  To determine whether primary midwife care (caseload midwifery) decreases the caesarean section rate compared with standard maternity care.

Design  Randomised controlled trial.

Setting  Tertiary-care women’s hospital in Melbourne, Australia.

Population  A total of 2314 low-risk pregnant women.

Methods  Women randomised to caseload received antenatal, intrapartum and postpartum care from a primary midwife with some care by ‘back-up’ midwives. Women randomised to standard care received either midwifery or obstetric-trainee care with varying levels of continuity, or community-based general practitioner care.

Main outcome measures  Primary outcome: caesarean birth. Secondary outcomes included instrumental vaginal births, analgesia, perineal trauma, induction of labour, infant admission to special/neonatal intensive care, gestational age, Apgar scores and birthweight.

Results  In total 2314 women were randomised–1156 to caseload and 1158 to standard care. Women allocated to caseload were less likely to have a caesarean section (19.4% versus 24.9%; risk ratio [RR] 0.78; 95% CI 0.67–0.91; P = 0.001); more likely to have a spontaneous vaginal birth (63.0% versus 55.7%; RR 1.13; 95% CI 1.06–1.21; P < 0.001); less likely to have epidural analgesia (30.5% versus 34.6%; RR 0.88; 95% CI 0.79–0.996; P = 0.04) and less likely to have an episiotomy (23.1% versus 29.4%; RR 0.79; 95% CI 0.67–0.92; P = 0.003). Infants of women allocated to caseload were less likely to be admitted to special or neonatal intensive care (4.0% versus 6.4%; RR 0.63; 95% CI 0.44–0.90; P = 0.01). No infant outcomes favoured standard care.

Conclusion  In settings with a relatively high baseline caesarean section rate, caseload midwifery for women at low obstetric risk in early pregnancy shows promise for reducing caesarean births.

Effect of aluminum on the corrosion resistance of low-alloy steel in 10wt% sulfuric acid solution

The aqueous corrosion behavior of low-alloy steel with aluminum contents was examined in a 10 wt% H₂SO₄ (pH 0.13) solution using electrochemical techniques and surface analyses. The corrosion resistance of the new alloy steel was evaluated in terms of electrochemical parameters, such as passive current density, film, and charge transfer resistances. The results showed that a high Al content in the steel imparted better passivation behavior resulting in a lower corrosion rate. It related to the enrichment of iron carbonate and hydrocarbon by the dissolution of the carbide phase.

Dynamic strain-induced ferrite transformation during hot compression of low carbon Si-Mn steels

The dynamic strain-induced transformation (DSIT) of austenite to ferrite was investigated under different undercooling conditions using three low carbon Si-Mn steels. The undercooling of austenite (ΔT) was controlled by varying the cooling rate between austenitization and deformation temperatures. Uniform DSIT ferrite grains (∼2.3 μm) were produced at a relatively high deformation temperature above 840°C using a low carbon high Si steel (0.077C-0.97Mn-1.35Si, mass%) in connection with a larger ΔT. The critical conditions for DSIT were determined based on the flow stress-strain curves measured during hot compression tests. Influence of deformation temperature on DSIT of low carbon Si-added steel was also discussed.

Effect of baking process on microstructures and mechanical properties of low silicon TRIP steel sheet with niobium

After 2% predeformation, the baking treatment with different schedule was carried out for low silicon TRIP steel sheet with niobium. The effects of baking temperature and time on microstructures and mechanical properties were investigated. The results showed that with increasing the baking temperature and time, the volume fraction of retained austenite decreases, and the volume fraction of tempered martensite increases; as baking temperature ranges from 80°C to 170°C, the bake-hardening (BH) value increases obviously, while from 170°C to 230°C, the variation of BH value is very slight; as baking time ranges from 2 min to 20 min, the BH value increases significantly, while the BH value decreases when baking time exceeds 20 min. So that when the baking temperature is 170°C and the baking time is 20 min, the low silicon TRIP steel sheet exhibits good bake-hardening behavior, and the highest BH value is above 70 MPa.

Transformation behavior of low carbon steels containing two different Si contents

Continuous cooling transformation behaviors of low carbon steels with two Si contents (0.50% and 1. 35%) were investigated under undeformed and deformed conditions. Effects of Si contents, deformation, and cooling rates on y transformation start temperature (A,_r3), phase microstructures, and hardness were studied. The results show that, in the case of the deformation with the true strain of 0. 4, the length of bainitic ferrite laths is significantly decreased in low Si steel, whereas, the M/A constituent becomes more uniform in high Si steel. An increase in cooling rates lowers the A,_r3 greatly. The steel with higher level of Si exhibits higher A,_r3, and higher hardness both under undeformed and deformed conditions compared with the steel with a lower Si content. Especially, the influence of Si on A_r3 is dependent on deformation. Such effects are more significant under the undeformed condition. The hardness of both steels increases with the increase of cooling rates, whereas, the deformation involved in both steels reduces the hardness.

Comparative study of ni effect on the corrosion behavior of low alloy steels in FGD and acid rain environments

The alloying effect of a small amount of nickel on low alloy steel for application to flue gas desulfurization(FGD) systems was studied. The structural characteristics of the rust layer were investigated by scanning electron microscopy(SEM). The electrochemical properties were examined by means of potentiostatic polarization test, potentiodynamic polarization test, and electrochemical impedance spectroscopy(EIS) in a modified green death solution of 16.9 vol.% H2SO4+0.35 vol.% HC1 at 60°C and an acid rain solution of 6.25 X 10-5 M H2S04+5.5 X 10-3 M NaCl at room temperature. It was found that as the amount of nickel increased, the corrosion rate increased in the modified green death solution, which seemed to result from micro-galvanic corrosion between NiS and alloy matrix. In acid rain solution, the corrosion rate decreased as the amount of nickel increased due to the repulsive force of NiFe204 rust against Cl-ions by electronegativity.

Repeated bouts of high-intensity exercise and muscle glycogen sparing in the rat

Even in the absence of food intake, several animal species recovering from physical activity of high intensity can replenish completely their muscle glycogen stores. In some species of mammals, such as in rats and humans, glycogen repletion is only partial, thus suggesting that a few consecutive bouts of high-intensity exercise might eventually lead to the sustained depletion of their muscle glycogen. In order to test this prediction, groups of rats with a lead weight of 10% body mass attached to their tails were subjected to either one, two or three bouts of high-intensity swimming, each bout being separated from the next by a 1 h recovery period. Although glycogen repletion after the first bout of exercise was only partial, all the glycogen mobilised in subsequent bouts was completely replenished during the corresponding recovery periods and irrespective of muscle fibre compositions. The impact of repeated bouts of high-intensity exercise on plasma levels of fatty acids, acetoacetate and β-hydroxybutyrate suggests that the metabolic state of the rat prior to the second and third bouts of exercise was different from that before the first bout. In conclusion, rats resemble other vertebrate species in that without food intake there are conditions under which they can replenish completely their muscle glycogen stores from endogenous carbon sources when recovering from high-intensity exercise. It remains to be established, however, whether this capacity is typical of mammals in general.

High-pressure study of low-compressibility Ta2N

Room temperature synchrotron x-ray diffraction experiments were performed on nanocrystal Ta₂N in a diamond anvil cell to a pressure of 55.48 GPa. This nitride is a well-known kind of high-hardness material, and it is found to be highly incompressible. The structure is stable with no phase transitions observed in this pressure range. The zero-pressure bulk modulus and its pressure derivative at ambient pressure are B₀ = 360 ± 3 GPa, B₀' = 4, and in room conditions, the a and c parameters are 3.054 Å, 4.996 Å, respectively. The bulk modulus of Ta₂N is greater than those of TaC, ε-TaN, Cr₂N and MoN. The differences in bulk moduli might be due to the differences in structure and the cohesive energy among these phases.