Implementação de um tuboexpansor na refinaria do Planalto Paulista – REPLAN com objetivo do aproveitamento da energia contida nos gases residuais do FCC – Fluid Catalytic Cracking na geração de energia elétrica

The steel type AISI 4130 (ultra-high strength steel) is an alloy of low carbon and its main alloying elements are chromium and molybdenum, which improves the toughness of the weld metal. It has numerous applications, especially where the need for high mechanical strength. It is widely used in equipment used by the aviation industry, such as cradle-tomotor, and this is the motivation for this study. Cots are of fundamental importance, because the engine supports and maintains balance in the fixed landing gear. This equipment is subjected to intense loading cycles, whose fractures caused by fatigue are constantly observed. Will be determined the effects caused by re-welding the structure of aeronautical equipment, and will also study the microstructure of the metal without welding. The studies will be done on materials used in aircraft, which was given to study. The results provide knowledge of microstructure to evaluate any type of fracture that maybe caused by fatigue. Fatigue is a major cause of aircraft accidents and incidents occurred, which makes the study of the microstructure of the metal, weld and re-solder the knowledge essential to the life of the material. The prevention and control of the process of fatigue in aircraft are critical, since the components are subjected to greater responsibility cyclic loading

Uso das técnicas de difusão em filmes finos por gradiente de concentração (DGT) para avaliação de metais disponibilizados em passivos de mineração de Urânio

The objective of this work is to use the technique of diffusion by concentration gradient films (DGT) for evaluation of dissolved urano in hydro bodies. For this we chose this work as a systems investigation of water bodies in the region of Poços de Caldas, state of Minas Gerais, because, there is a large amount of mining of uranila. The technique to be used to evaluate the potential for dissolved metals analysis involves the use of passive samplers with application in in situ. This allows detection with excellent sensitivity and selectivity allowing the determination of the labile fraction of dissolved metals

As políticas de formação do arte educador no século XXI: o caso da UNESP no Estado de São Paulo

This paper deals with the training of art educators, focusing on the courses offered at public universities in the state of São Paulo, where, specifically the pedagogical approach of training curricula of grades offered at UNESP, campus of São Paulo and Bauru. In the current situation have been proposed, from training in undergraduate courses, new tasks and responsibilities to work teaching the teacher in order to develop this educational increasingly effective so as to ensure efficient productivity autonomous learner in the process cognitive development in basic education, the teacher being assigned the task of stimulating that process and manage situations of educational work as a way of systematizing knowledge. The research consisted of questioning whether that teacher training allowed contact with the educational resources necessary for teaching, under current conditions assigned by the neoliberal conjuncture educational work of art educator with a view to the formation of aesthetic sensibility of the students from the class working, privileged pupils of public schools, to contribute to establishing the apprehension about the pedagogical training of art educators to confront the reality school, considering the specificity of action of these teachers. Therefore we conducted a desk study of existing legislation and the National Curriculum Guidelines that guide teacher training, correlating them to Pedagogical Policy Projects and curricula of undergraduate courses in Arts Education and / or Visual Arts courses UNESP. The work of desk research, quantitative and analytical, refers strictly pedagogical part, amid restructuring curriculum established by the undergraduate courses in the periods 2003 to 2011, with the promulgation of the CNE/ CP nº. 9 / 2001 and the Resolution CNE/CP n.º 1/2002 and n.º 2/2002... (Complete abstract click electronic access below)

Ensino fundamental de nove anos: processo de implantação no munícipio de Rio Claro

The object of this study was to analyze the process of implementing the compulsory education to nine years, according to the Law 11.274/06, in Rio Claro. Thus it was established a brief analysis of the trajectory of Brazilian educational policy that began with the Law of Directives and Bases 4.024/61 and was followed by the Law 5.692/71, the 1988 Federal Constitution, the Law of Directives and Bases 9394 / 96, the National Educational Plan - Law 10.172/01, Law 11.114/05, 11.274/06 and the Constitutional Amendment. 59/2009, pointing to increase access to education that aims to expand and ensure free education and compulsory basic education for children aging from 04 to 17 years old. The research has been based on collecting bibliographical data, information and data for the municipality of Rio Claro, through official documents, semi-structured interviews, and research on government websites. The expansion of basic education to nine years has been securing the rights gained over time through education. Moreover, this expansion of education promotes a questioning about the quality of teaching and a concern for the financial contributions required for education.

Avaliação de projetos logísticos de RFID aplicados na indústria aeronáutica brasileira

Pós-graduação em Engenharia Mecânica - FEG

A psicanálise entre a higiene mental e a escola nova na obra de Arthur Ramos: contribuições à história da educação no Brasil

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Análise da diversidade genética em Curimbatá (Prochilodus) da Bacia do Prata e Amazônia

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Função pulmonar em indivíduos com SAOS antes e após o uso do CPAP: estudo randomizado duplo cego

Pós-graduação em Bases Gerais da Cirurgia - FMB

Effect of two formulations of 10% sodium ascorbate on fracture resistance of endodontically treated tooth submitted to dental bleaching with hydrogen peroxide associated titanium dioxide nanoparticles

Purpose: This study evaluated the effect of 10% sodium ascorbate (10SA), in gel (10SAg) or aqueous solution (10SAs) formulations, on fracture resistance of endodontically treated tooth submitted to dental bleaching procedures with 15% hydrogen peroxide associated with titanium dioxide (15HP-TiO2) nanoparticles and photoactivated by LED-laser. Material and methods: Forty maxillary premolars were endodontically-treated and embedded in acrylic resin up to the cement-enamel junction. The specimens were divided into four groups (n=10): G1 (negative control): no bleaching, coronal access restored with composite resin; G2 (positive control): three dental bleaching sessions using 15HP-TiO2 and LED-laser photoactivation and restored with composite resin (positive control); G3 (10SAg): similar procedures to G2, but applied 10SA, in gel formulation, for 24 hours before restoration; G4 (10SAs): similar procedures to G3, but applied 10SA, in aqueous solution formulation. The 15HP-TiO2 was applied on buccal and lingual surfaces of the crown tooth and inside the pulp chamber and photoactivated by LED-laser. Between each bleaching session, the teeth were maintained in artificial saliva, at 37oC, for 7 days. In sequence, the teeth were submitted to fracture resistance testing using an eletromechanical machine test. The data was analyzed using Kruskal Wallis test (p = 0.05) Results: There are no differences significant among the groups in relation to fracture resistance of endodontically treated teeth (p>0.05). Conclusions: The use of 10% sodium ascorbate, in gel or aqueous solution formulations, did not interfered on the fracture resistance teeth after dental bleaching using 15HP-TiO2 and LED-laser photoactivation.

The effect of final irrigation on the penetrability of an epoxy resin-based sealer into dentinal tubules: a confocal microscopy study

Introduction The aim of this study was to compare the effect of QMix, BioPure MTAD, 17 % EDTA, and saline on the penetrability of a resin-based sealer into dentinal tubules using a confocal laser scanning microscope (CLSM) and to describe the cleaning of root canal walls by SEM. Methods Eighty distobuccal roots from upper molars were selected and randomly divided into four groups (n=20) before root canal preparation according to the solution used in the final rinse protocol (FRP): QG (QMix), MG (BioPure MTAD), EG (17 % EDTA), and CG (control group: saline). Ten roots of each group were prepared for SEM, and images (×2000) from the canal walls were acquired. The remaining canals were filled with a single gutta-percha cone and AH Plus with 0.1 % Rhodamine B. The specimens were horizontally sectioned at 4 mm from the apex, and the slices were analyzed in CLSM (×10). Sealer penetration was analyzed with Adobe Photoshop software. Results QG and EG presented similar amounts of sealer penetration (P>.05). MG and CG presented the lowest penetrability values (P<.05). The best results for smear layer removal of the apical third of the root canal were achieved by the QG and EG groups when compared with MG and CG (P<.05). Conclusions Seventeen percent EDTA and QMix promoted sealer penetration superior to that achieved by BioPure MTAD and saline. Clinical relevance Despite studies have not confirmed the relationship between sealing ability of endodontic sealers and their penetration in dentinal tubules, sealer penetration assumes importance, since endodontic sealers, unlike guttapercha, are able to penetrate in dentinal tubules, isthmus, and accessory canals, filling the root canal system.

Residues of different gel formulations on dentinal walls: a SEM/EDS analysis

The aim of this study was to evaluate the presence of residues of sodium hypo-chlorite gel, chlorhexidine gel, and EDTA gel on dentina l walls after canal preparat ion throughchemical SEM- elemental chemical microanal ys is (EDS) analysis. Forty-eight single-rootedteeth were selected. They had their crowns sectioned and were instrumented with a reciprocat-ing system. The canals were irrigated with 5 mL of saline solution during root canal preparation.After instrumentation, the root canals were irrigated with 3 mL 17% EDTA followed by 1 min ofultrasonic passive activation (33 20 sec) to remove the smear layer, and then irrigated with3 mL of saline solution. The specimens were randomized into three groups (n 5 12) accord ing tothe chemical substance that filled the root canal for 30 min: GI: 5.5% sodium hypochlorite gel;GII: 2% chlorhexidine gel; GIII: 24% EDTA gel; Negative c ontrol group: no substance was used.Then, the root canals were irrigated with 6 mL of saline solution followed by 1 min of ultrasonicpassive activation (33 20 sec). After ultrasonic activation , the canals were irrigated with 2 mLsaline. The roots were sect ioned, and the perce ntage of each chemical element present in thesamples was analyzed through chemi cal SEM-EDS microanalysis. All expe rimental groupsshowed a significantly higher percentage of chemical elements (Na and/or Cl) than the controlgroup (P < 0.03). This in vitro study has shown that, regardless of chemical solutions used evenafter the final irrigation protocol, chemical residues of d ifferent substances remained attached tothe r oot c anal wa lls. Microsc. Res. Tech. 78:495–49 9, 2015.

Push-out bond strength of fiber posts to root dentin using glass ionomer and resin modified glass ionomer cements

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Comparative study on direct and indirect bracket bonding techniques regarding time length and bracket detachment

OBJECTIVE: The aim of this study was to assess the time spent for direct (DBB - direct bracket bonding) and indirect (IBB - indirect bracket bonding) bracket bonding techniques. The time length of laboratorial (IBB) and clinical steps (DBB and IBB) as well as the prevalence of loose bracket after a 24-week follow-up were evaluated. METHODS: Seventeen patients (7 men and 10 women) with a mean age of 21 years, requiring orthodontic treatment were selected for this study. A total of 304 brackets were used (151 DBB and 153 IBB). The same bracket type and bonding material were used in both groups. Data were submitted to statistical analysis by Wilcoxon non-parametric test at 5% level of significance. RESULTS: Considering the total time length, the IBB technique was more time-consuming than the DBB (p < 0.001). However, considering only the clinical phase, the IBB took less time than the DBB (p < 0.001). There was no significant difference (p = 0.910) for the time spent during laboratorial positioning of the brackets and clinical session for IBB in comparison to the clinical procedure for DBB. Additionally, no difference was found as for the prevalence of loose bracket between both groups. CONCLUSION: the IBB can be suggested as a valid clinical procedure since the clinical session was faster and the total time spent for laboratorial positioning of the brackets and clinical procedure was similar to that of DBB. In addition, both approaches resulted in similar frequency of loose bracket.

Prevalence of low back pain and associated factors in adults from a middle-size Brazilian city

Objective: To determine the prevalence of low back pain and some related variables among adults of both genders. Methods: Was conduct a cross-sectional study of population-based in the urban area of Presidente Prudente, São Paulo. The sample consisted of 743 adult residents for over two years in this city. Low back pain, quality of sleep and physical activity were collected through face to face interview at the residence of respondents. Was used the chi-square test to analyze the association between variables, later was created tree multivariate models with hierarchical inclusion of confounding factors. Results: The prevalence of low back pain reported last year was 50.2% (95% CI: 46.6, 53.8), and the last week 32.3% (95% CI: 28.9, 35.6). Was association among low back pain and females (p-value = 0.031), older age, lower education, altered sleep and overweight, the adjusted model found that people over the age of 45 years (45 to 59.9 years, OR = 13.1 [1.72-98.5] and ≥ 60 years, OR = 9.10 [1.15-71.7]), with some alteration of sleep (OR = 3.21 [1.84-5.61]) and obese (OR = 2.33 [1:26 to 4:33]) seems to be a risk group for low back pain. Conclusion: The prevalence of low back pain is high and obese people aged over 45 years, with any sleep disturbance are a group at higher risk for low back pain.

Fibras alimentares: efeito na farinha, reologia das massas, qualidade e taxa de envelhecimento de pães

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)