The development of internal water cooling techniques for the rotational moulding process

This paper reports the findings from internal mould cooling trials using a water spray configuration applied at various internal mould air temperatures from 120°C to 180°C for an aluminium mould. To achieve maximum benefit in terms of cycle time reduction, internal mould water cooling was used in conjunction with a combination of external forced air and water cooling. Savings in cooling times of up to 30% were achieved compared to conventional external only forced air cooling.

Political Violence and Adolescent Out-group Attitudes and Prosocial Behaviors: Implications for Positive Inter-group Relations

The negative impact of political violence on adolescent adjustment is well established. Less is known about factors that affect adolescents' positive outcomes in ethnically divided societies, especially influences on prosocial behaviors toward the out-group, which may promote constructive relations. For example, understanding how inter-group experiences and attitudes motivate out-group helping may foster inter-group co-operation and help to consolidate peace. The current study investigated adolescents' overall and out-group prosocial behaviors across two time points in Belfast, Northern Ireland (N = 714 dyads; 49% male; Time 1: M = 14.7, SD = 2.0, years old). Controlling for Time 1 prosocial behaviors, age, and gender, multi-variate structural equation modeling showed that experience with inter-group sectarian threat predicted fewer out-group prosocial behaviors at Time 2 at the trend level. On the other hand, greater experience of intra-group non-sectarian threat at Time 1 predicted more overall and out-group prosocial behaviors at Time 2. Moreover, positive out-group attitudes strengthened the link between intra-group threat and out-group prosocial behaviors one year later. Finally, experience with intra-group non-sectarian threat and out-group prosocial behaviors at Time 1 was related to more positive out-group attitudes at Time 2. The implications for youth development and inter-group relations in post-accord societies are discussed.

Use of Short Time-on-Stream Attenuated Total Internal Reflection Infrared Spectroscopy To Probe Changes in Adsorption Geometry for Determination of Selectivity in the Hydrogenation of Citral

Abstract Image

A new experimental procedure based on attenuated total reflection infrared spectroscopy has been developed to investigate surface species under liquid phase reaction conditions. The technique has been tested by investigating the enhanced selectivity in the hydrogenation of α,β-unsaturated aldehyde citral over a 5% Pt/SiO2 catalyst toward unsaturated alcohols geraniol/nerol, which occurs when citronellal is added to the reaction. The change in selectivity is proposed to be the result of a change in the citral adsorption mode in the presence of citronellal. Short time on stream attenuated total internal reflection infrared spectroscopy has allowed identification of the adsorption modes of citral. With no citronellal, citral adsorbs through both the C═C and C═O groups; however, in the presence of citronellal, citral adsorption occurs through the C═O group only, which is proposed to be the cause of the altered reaction selectivity.

Direct Detection of YORP Spin-up on Asteroid (25143) Itokawa and Implications for its Internal Structure

Near-Earth asteroid (25143) Itokawa was visited by the Hayabusa spacecraft in 2005, resulting in a highly detailed surface shape and topography model. This model has led to several predictions for the expected radiative torques on this asteroid, suggesting that its spin rate should be decelerating. Through an observational survey spanning 2001 to 2013 we have successfully measured an acceleration in its spin rate of dω/dt = 3.54 (± 0.38) × 10^(-8) rad day^(-2), equivalent to a decrease of its rotation period of ~ 45 ms year^(-1). Using the shape model determined from the Hayabusa spacecraft, we applied a detailed thermophysical analysis, to reconcile the predicted YORP strength with that observed. We find that the center-of-mass for Itokawa must be shifted by ~20 m along the long-axis of the asteroid to reconcile observations with theory. This can be explained if Itokawa is composed of two separate bodies with very different bulk densities of 1740 ± 110 kg m^(-3) and 2730 ± 440 kg m^(-3), and was formed from the merger of two separate bodies, consistent with the collapse of a binary system or the re-accumulation of material from a catastrophic collisional disruption. We demonstrate that an observational measurement of radiative torques, when combined with a detailed shape model, can provide insight into the interior structure of an asteroid.

Preparation of Aqueous Core/Polymer Shell Microcapsules by Internal Phase Separation

Aqueous core/polymer shell microcapsules with mommuclear and polynuclear core morphologies have been formed by internal phase separation from water-in-oil emulsions. The water-in-oil emulsions were prepared with the shell polymer dissolved in the aqueous phase by adding a low boiling point cosolvent. Subsequent removal of this cosolvent (by evaporation) leads to phase separation of the polymer and, if the spreading conditions are correct, formation of a polymer shell encapsulating the aqueous core. Poly(tetrahydrofuran) (PTHF) shell/aqueous core microcapsules, with a single (mononuclear) core, have been prepared, but the low T-g (-84 degreesC) of PTHF makes characterization of the particles more difficult. Poly(methyl methacrylate) and poly(isobutyl methacrylate) have higher T-g values (105 and 55 degreesC, respectively) and can be dissolved in water at sufficiently high acetone concentrations, but evaporation of the acetone from the emulsion droplets in these cases mostly resulted in polynuclear capsules, that is, having cores with many very small water droplets contained within the polymer matrix. Microcapsules with fewer, larger aqueous droplets in the core could be produced by reducing the rate of evaporation of the acetone. A possible mechanism for the formation of these polynuclear cores is suggested. These microcapsules were prepared dispersed in an oil-continuous phase. They could, however, be successfully transferred to a water-continuous phase, using a simple centrifugation technique. In this way, microcapsules with aqueous cores, dispersed in an aqueous medium, could be made. It would appear that a real challenge with the water-core systems, compared to the previous oil-core systems, is to obtain the correct order of magnitude of the three interfacial tensions, between the polymer, the aqueous phase, and the continuous oil phase; these control the spreading conditions necessary to produce shells rather than "acorns".

The EU Constitution of Social Governance in an Economic Crisis: in Defence of a Transnational Dimension to Social Europe

Conventional wisdom has it that the EU is unable to promote viable social integration, which contrasts with its commitments to improving working and living conditions and to social values and goals such as solidarity, social protection and social inclusion. This
article challenges two diff erent standpoints: on the one hand, competitive neoliberalism demands that the EU focuses on economic integration through legally binding internal market and competition rules even if Member States can only maintain a limited commitment to social inclusion, while authors defending the social models unique to the continent of Europe demand that the EU rescinds some of its established legal principles in order to make breathing space for Member States to maintain market correcting social policies. Both positions convene that there should be no genuine social policy at EU level.
This article uses scenarios of widely discussed rulings by the Court of Justice to illustrate that legally enforceable economic integration would prevent most Member States from achieving sustainable health services, labour relations and free university education on the basis of national closure. Since the EU has limited legislative competences to create EU level institutions to balance inequalities, it derives a Constitution of Social Governance from the EU’s values, proposing that the Court of Justice develops its urisprudence into an instrument for challenging European disunion induced by new EU economic governance

Water and temperature relations of soil Actinobacteria

Actinobacteria perform essential functions within soils, and are dependent on available water to do so. We determined the water-activity (a_w) limits for cell division of Streptomyces albidoflavus, Streptomyces rectiviolaceus, Micromonospora grisea and Micromonospora (JCM 3050) over a range of temperatures, using culture media supplemented with a biologically permissive solute (glycerol). Each species grew optimally at 0.998 a_w (control; no added glycerol) and growth rates were near-optimal in the range 0.971–0.974 (1 M glycerol) at permissive temperatures. Each was capable of cell division at 0.916–0.924 a_w (2 M glycerol), but only S. albidoflavus grew at 0.895 or 0.897 a_w (3 M glycerol, at 30 and 37°C respectively). For S. albidoflavus, however, no growth occurred on media at ≤ 0.870 (4 M glycerol) during the 40-day assessment period, regardless of temperature, and a theoretical limit of 0.877 a_w was derived by extrapolation of growth curves. This level of solute tolerance is high for non-halophilic bacteria, but is consistent with reported limits for the growth and metabolic activities of soil microbes. The limit, within the range 0.895–0.870 a_w, is very much inferior to those for obligately halophilic bacteria and extremely halophilic or xerophilic fungi, and is inconsistent with earlier reports of cell division at 0.500 a_w. These findings are discussed in relation to planetary protection policy for space exploration and the microbiology of arid soils.

Water and Temperature Relations of Growth of the Entomogenous Fungi Beauveria bassiana, Metarhizium anisopliae, and Paecilomyces farinosus

The effects of temperature (5-50°C), water availability (0.998-0.88 water activity, aw), and aw × temperature interactions (15-45°C) on growth of three entomogenous fungi, Beauveria bassiana, Metarhizium anisopliae, and Paecilomyces farinosus, were evaluated on a Sabouraud dextrose-based medium modified with the ionic solute KCl, the non-ionic solute glycerol, and an inert solute, polyethylene glycol (PEG) 600. The temperature ranges for growth of B. bassiana, M. anisopliae, and P. farinosus were 5-30, 5-40, and 5-30°C, and optimum growth temperatures were 25, 30, and 20°C, respectively. All three species grew over a similar aw range (0.90-0.998) at optimum temperatures for growth. However, there were significant interspecies variations in growth rates on media modified with each of the three aw-modifying solutes. Growth aw optima ranged between 0.99 and 0.97 on KCl-, glycerol-, and PEG 600-modified media for M. anisopliae and P. farinosus. B. bassiana grew optimally at 0.998 aw, regardless of aw. Comprehensive two-dimensional profiles of aw × temperature relations for growth of these three species were constructed for the first time. The results are discussed in relation to the environmental limits that determine efficacy of entomogenous fungi as biocontrol agents in nature. © 1999 Academic Press.

Experimental Reconstruction of Work Distribution and Study of Fluctuation Relations in a Closed Quantum System

We report the experimental reconstruction of the nonequilibrium work probability distribution in a closed quantum system, and the study of the corresponding quantum fluctuation relations. The experiment uses a liquid-state nuclear magnetic resonance platform that offers full control on the preparation and dynamics of the system. Our endeavors enable the characterization of the out-of-equilibrium dynamics of a quantum spin from a finite-time thermodynamics viewpoint.