Interacción genotipo por ambiente sobre caracteres de calidad comercial e industrial en trigo pan (Triticum aestivum L.)

El genotipo (G), el ambiente (A) y la interacción G x A pueden influir de manera diferente sobre las característica que definen la calidad comercial e industrial de trigo pan. Los objetivos de esta tesis fueron: 1) Caracterizar el rendimiento y a sus componentes en cultivares de trigo pertenecientes a diferentes grupos de calidad, expuestos a ofertas de nitrógeno contrastantes. 2) Estudiar el impacto de distinta disponibilidad de nitrógeno sobre los componentes fisiológicos del llenado de los granos (i.e tasa y duración) en distintaas variedades de trigo pan y su posible efecto sobre los parámetros de calidad. 3) Caracterizar y cuantificar la interacción genotipo por ambiente sobre la expresión de los parámetros que determinan el rendimiento y la calidad comercial e industrial del trigo pan en ambientes con diferentes disponibilidades de nitrógeno. Se realizaron ensayos en dos localidades, durante dos años, utilizando seis variedades de distinta aptitud panadera (2 de cada grupo de clasificación por grupo de calidad -GC-), aplicando cuatro tratamientos de fertilización nitrogenadas. Se evaluó el efecto genético, ambiental y la interacción G x A, sobre el rendimiento y sus componentes, el peso de los granos y sus componentes y sobre los parámetros de calidad comercial e industrial. Los resultados mostraron que el rendimiento y sus componentes (número de granos, biomasa aérea, eficiencia de uso de la radiación interceptada acumulada) fueron afectados principalmente por el ambiente y el manejo nutricional dentro de de cada ambiente. Para el peso de los granos y sus componentes (tasa y duración) el efecto del manejo del nitrógeno no fue importante, aunque sí lo fue el efecto genotipo. Para los parámetros de calidad el efecto genotipo fue más importante solo para la tenacidad, mientras que el peso hectolítrico, gluten húmedo, fuerza panadera, la relación de equilibrio (P/L) y volumen de pan fueron modificados principalmente por el efecto ambiente no manejable como son el año y la localidad, en tanto la proteína fue afectada principalmente por el factor ambiental asociado al manejo nutricional. La interacción GxA fue el efecto que explicó en mayor medida las variaciones de rendimiento de harina, absorción de agua y tiempo de amasado. La fuerte interacción GxA observada para la mayoría de los parámetros de calidad determinó que variedades de un determinado GC cambien de grupo asociado principalmente a factores ambientales como la localidad y el año, mientras que el manejo nutricional tuvo un impacto menor

Momento de ocurrencia, magnitud y reiteración de lluvias como determinante del lavado del grano de trigo y su efecto en la calidad comercial e industrial

p.45-53

Interacción genotipo por ambiente sobre caracteres de calidad comercial e industrial en trigo pan (Triticum aestivum L.)

El genotipo (G), el ambiente (A)y la interacción G x A pueden influir de manera diferente sobre las característica que definen la calidad comercial e industrial de trigo pan. Los objetivos de esta tesis fueron: 1)Caracterizar el rendimiento y a sus componentes en cultivares de trigo pertenecientes a diferentes grupos de calidad, expuestos a ofertas de nitrógeno contrastantes. 2)Estudiar el impacto de distinta disponibilidad de nitrógeno sobre los componentes fisiológicos del llenado de los granos (i.e tasa y duración)en distintaas variedades de trigo pan y su posible efecto sobre los parámetros de calidad. 3)Caracterizar y cuantificar la interacción genotipo por ambiente sobre la expresión de los parámetros que determinan el rendimiento y la calidad comercial e industrial del trigo pan en ambientes con diferentes disponibilidades de nitrógeno. Se realizaron ensayos en dos localidades, durante dos años, utilizando seis variedades de distinta aptitud panadera (2 de cada grupo de clasificación por grupo de calidad -GC-), aplicando cuatro tratamientos de fertilización nitrogenadas. Se evaluó el efecto genético, ambiental y la interacción G x A, sobre el rendimiento y sus componentes, el peso de los granos y sus componentes y sobre los parámetros de calidad comercial e industrial. Los resultados mostraron que el rendimiento y sus componentes (número de granos, biomasa aérea, eficiencia de uso de la radiación interceptada acumulada)fueron afectados principalmente por el ambiente y el manejo nutricional dentro de de cada ambiente. Para el peso de los granos y sus componentes (tasa y duración)el efecto del manejo del nitrógeno no fue importante, aunque sí lo fue el efecto genotipo. Para los parámetros de calidad el efecto genotipo fue más importante solo para la tenacidad, mientras que el peso hectolítrico, gluten húmedo, fuerza panadera, la relación de equilibrio (P/L)y volumen de pan fueron modificados principalmente por el efecto ambiente no manejable como son el año y la localidad, en tanto la proteína fue afectada principalmente por el factor ambiental asociado al manejo nutricional. La interacción GxA fue el efecto que explicó en mayor medida las variaciones de rendimiento de harina, absorción de agua y tiempo de amasado. La fuerte interacción GxA observada para la mayoría de los parámetros de calidad determinó que variedades de un determinado GC cambien de grupo asociado principalmente a factores ambientales como la localidad y el año, mientras que el manejo nutricional tuvo un impacto menor

Efecto del pastoreo del trigo sobre el rendimiento y la calidad industrial del grano

p.93-102

Modelling of industrial multi-physics processes—a key role for computational mechanics.

In the analysis of industrial processes, there is an increasing emphasis on systems governed by interacting continuum phenomena. Mathematical models of such multi-physics processes can only be achieved for practical simulations through computational solution procedures—computational mechanics. Examples of such multi-physics systems in the context of metals processing are used to explore some of the key issues. Finite-volume methods on unstructured meshes are proposed as a means to achieve efficient rapid solutions to such systems. Issues associated with the software design, the exploitation of high performance computers, and the concept of the virtual computational-mechanics modelling laboratory are also addressed in this context.

Bulk synchronous parallelization of industrial electromagentic software

The parallelization of existing/industrial electromagnetic software using the bulk synchronous parallel (BSP) computation model is presented. The software employs the finite element method with a preconditioned conjugate gradient-type solution for the resulting linear systems of equations. A geometric mesh-partitioning approach is applied within the BSP framework for the assembly and solution phases of the finite element computation. This is combined with a nongeometric, data-driven parallel quadrature procedure for the evaluation of right-hand-side terms in applications involving coil fields. A similar parallel decomposition is applied to the parallel calculation of electron beam trajectories required for the design of tube devices. The BSP parallelization approach adopted is fully portable, conceptually simple, and cost-effective, and it can be applied to a wide range of finite element applications not necessarily related to electromagnetics.

Numerical predictions of particle degradation in industrial-scale pneumatic conveyors

This paper presents an Eulerian-based numerical model of particle degradation in dilute-phase pneumatic conveying systems including bends of different angles. The model shows reasonable agreement with detailed measurements from a pilot-sized pneumatic conveying system and a much larger scale pneumatic conveyor. The potential of the model to predict degradation in a large-scale conveying system from an industrial plant is demonstrated. The importance of the effect of the bend angle on the damage imparted to the particles is discussed.

Nonlinear MHD stability of aluminium reduction cells

An industrial electrolysis cell used to produce primary aluminium is sensitive to waves at the interface of liquid aluminium and electrolyte. The interface waves are similar to stratified sea layers [1], but the penetrating electric current and the associated magnetic field are intricately involved in the oscillation process, and the observed wave frequencies are shifted from the purely hydrodynamic ones [2]. The interface stability problem is of great practical importance because the electrolytic aluminium production is a major electrical energy consumer, and it is related to environmental pollution rate. The stability analysis was started in [3] and a short summary of the main developments is given in [2]. Important aspects of the multiple mode interaction have been introduced in [4], and a widely used linear friction law first applied in [5]. In [6] a systematic perturbation expansion is developed for the fluid dynamics and electric current problems permitting reduction of the three-dimensional problem to a two dimensional one. The procedure is more generally known as “shallow water approximation” which can be extended for the case of weakly non-linear and dispersive waves. The Boussinesq formulation permits to generalise the problem for non-unidirectionally propagating waves accounting for side walls and for a two fluid layer interface [1]. Attempts to extend the electrolytic cell wave modelling to the weakly nonlinear case have started in [7] where the basic equations are derived, including the nonlinearity and linear dispersion terms. An alternative approach for the nonlinear numerical simulation for an electrolysis cell wave evolution is attempted in [8 and references there], yet, omitting the dispersion terms and without a proper account for the dissipation, the model can predict unstable waves growth only. The present paper contains a generalisation of the previous non linear wave equations [7] by accounting for the turbulent horizontal circulation flows in the two fluid layers. The inclusion of the turbulence model is essential in order to explain the small amplitude self-sustained oscillations of the liquid metal surface observed in real cells, known as “MHD noise”. The fluid dynamic model is coupled to the extended electromagnetic simulation including not only the fluid layers, but the whole bus bar circuit and the ferromagnetic effects [9].

Numerical simulation of flow-induced cavity noise in self-sustained oscillations

The generation and near-field radiation of aerodynamic sound from a low-speed unsteady flow over a two-dimensional automobile door cavity is simulated by using a source-extraction-based coupling method. In the coupling procedure, the unsteady cavity flow field is first computed solving the Reynolds averaged Navier–Stokes (RANS) equations. The radiated sound is then calculated by using a set of acoustic perturbation equations with acoustic source terms which are extracted from the time-dependent solutions of the unsteady flow. The aerodynamic and its resulting acoustic field are computed for the Reynolds number of 53,266 based on the base length of the cavity. The free stream flow velocity is taken to be 50.9m/s. As first stage of the numerical investigation of flow-induced cavity noise, laminar flow is assumed. The CFD solver is based on a cell-centered finite volume method. A dispersion-relation-preserving (DRP), optimized, fourth-order finite difference scheme with fully staggered-grid implementation is used in the acoustic solver

Industrial water pollution in Dhaka, Bangladesh: strategies and incentives for pollution control in small and medium enterprises

The extent and gravity of the environmental degradation of the water resources in Dhaka due to untreated industrial waste is not fully recognised in international discourse. Pollution levels affect vast numbers, but the poor and the vulnerable are the worst affected. For example, rice productivity, the mainstay of poor farmers, in the Dhaka watershed has declined by 40% over a period of ten years. The study found significant correlations between water pollution and diseases such as jaundice, diarrhoea and skin problems. It was reported that the cost of treatment of one episode of skin disease could be as high as 29% of the weekly earnings of some of the poorest households. The dominant approach to deal with pollution in the SMEs is technocratic. Given the magnitude of the problem this paper argues that to control industrial pollution by SMEs and to enhance their compliance it is necessary to move from the technocratic approach to one which can also address the wider institutional and attitudinal issues. Underlying this shift is the need to adopt the appropriate methodology. The multi-stakeholder analysis enables an understanding of the actors, their influence, their capacity to participate in, or oppose change, and the existing and embedded incentive structures which allow them to pursue interests which are generally detrimental to environmental good. This enabled core and supporting strategies to be developed around three types of actors in industrial pollution, i.e., (i) principal actors, who directly contribute to industrial pollution; (ii) stakeholders who exacerbate the situation; and (iii) potential actors in mitigation. Within a carrot-and-stick framework, the strategies aim to improve environmental governance and transparency, set up a packet to incentive for industry and increase public awareness.

Production of lightweight aggregate from industrial waste and carbon dioxide

The concomitant recycling of waste and carbon dioxide emissions is the subject of developing technology designed to close the industrial process loop and facilitate the bulk-re-use of waste in, for example, construction. The present work discusses a treatment step that employs accelerated carbonation to convert gaseous carbon dioxide into solid calcium carbonate through a reaction with industrial thermal residues. Treatment by accelerated carbonation enabled a synthetic aggregate to be made from thermal residues and waste quarry fines. The aggregates produced had a bulk density below 1000 kg/m3 and a high water absorption capacity. Aggregate crushing strengths were between 30% and 90% stronger than the proprietary lightweight expanded clay aggregate available in the UK. Cast concrete blocks containing the carbonated aggregate achieve compressive strengths of 24 MPa, making them suitable for use with concrete exposed to non-aggressive service environments. The energy intensive firing and sintering processes traditionally required to produce lightweight aggregates can now be augmented by a cold-bonding, low energy method that contributes to the reduction of green house gases to the atmosphere.

Accelerated carbonation treatment of industrial wastes

The disposal of industrial waste presents major logistical, financial and environmental issues. Technologies that can reduce the hazardous properties of wastes are urgently required. In the present work, a number of industrial wastes arising from the cement, metallurgical, paper, waste disposal and energy industries were treated with accelerated carbonation. In this process carbonation was effected by exposing the waste to pure carbon dioxide gas. The paper and cement wastes chemically combined with up to 25% by weight of gas. The reactivity of the wastes to carbon dioxide was controlled by their constituent minerals, and not by their elemental composition, as previously postulated. Similarly, microstructural alteration upon carbonation was primarily influenced by mineralogy. Many of the thermal wastes tested were classified as hazardous, based upon regulated metal content and pH. Treatment by accelerated carbonation reduced the leaching of certain metals, aiding the disposal of many as stable non-reactive wastes. Significant volumes of carbon dioxide were sequestrated into the accelerated carbonated treated wastes.

Characterising noise signals in 2-phase solid gas flows

Pneumatic conveying of powder and granular material involve the mixed flow of solid particles in air. Characterisation of solid/gas flow regimes is important for the design, operation and control of plants involving such two-phase processes. This paper describes preliminary studies directed at identifying flow regimes in solid/gas flows by analysis of the process `noise' signals from a flow transmitter which has a relatively wide frequency response.

An industrial implementation of a methodology for the optimisation of product design tolerances

Today, the key to commercial success in manufacturing is the timely development of new products that are not only functionally fit for purpose but offer high performance and quality throughout their entire lifecycle. In principle, this demands the introduction of a fully developed and optimised product from the outset. To accomplish this, manufacturing companies must leverage existing knowledge in their current technical, manufacturing and service capabilities. This is especially true in the field of tolerance selection and application, the subject area of this research. Tolerance knowledge must be readily available and deployed as an integral part of the product development process. This paper describes a methodology and framework,currently under development in a UK manufacturer, to achieve this objective.