967 resultados para ISODOSE CURVES
Resumo:
The response of porous Al2O3 to nanoindentation was investigated at microscopic scales (nm-mu m) and under ultra-low loads from 5 to 90 mN with special attention paid to the dependence of the load-depth behaviour to sample porosity. It was found that the load-depth curves manifest local responses typical of the various porous structures investigated. This is particularly clear for the residual deformation after load removal. Similarly, the limited mean pressure of the sample containing small grains and interconnected pores is consistent with its porous structure. By comparison, the samples with larger grain size and various porous structures exhibit higher pressures and smaller residual deformations that can be attributed to the mechanical response of the solid phase. (C) 2007 Elsevier B.V. All rights reserved.
Resumo:
As part of an ongoing program of benthic sampling and related assessments of sediment quality at Gray’s Reef National Marine Sanctuary (GRNMS) off the coast of Georgia, a survey of soft-bottom benthic habitats was conducted in spring 2005 to characterize condition of macroinfaunal assemblages and levels of chemical contaminants in sediments and biota relative to a baseline survey carried out in spring 2000. Distribution and abundance of macrobenthos were related foremost to sediment type (median particle size, % gravel), which in turn varied according to bottom-habitat mesoscale features (e.g., association with live bottom versus flat or rippled sand areas). Overall abundance and diversity of soft-bottom benthic communities were similar between the two years, though dominance patterns and relative abundances of component species were less repeatable. Seasonal summer pulses of a few taxa (e.g., the bivalve Ervilia sp. A) observed in 2000 were not observed in 2005. Concentrations of chemical contaminants in sediments and biota, though detectable in both years, were consistently at low, background levels and no exceedances of sediment probable bioeffect levels or FDA action levels for edible fish or shellfish were observed. Near-bottom dissolved oxygen levels and organic-matter content of sediments also have remained within normal ranges. Highly diverse benthic assemblages were found in both years, supporting the premise that GRNMS serves as an important reservoir of marine biodiversity. A total of 353 taxa (219 identified to species) were collected during the spring 2005 survey. Cumulatively, 588 taxa (371 identified to species) have been recorded in the sanctuary from surveys in 2000, 2001, 2002, and 2005. Species Accumulation Curves indicate that the theoretical maximum should be in excess of 600 species. Results of this study will be of value in advancing strategic science and management goals for GRNMS, including characterization and long-term monitoring of sanctuary resources and processes, as well as supporting evolving interests in ecosystem-based management of the surrounding South Atlantic Bight (SAB) ecosystem. (PDF contains 46 pages)
Resumo:
Estimates of length at birth and early postnatal growth are made for the northern and southern populations of the offshore spotted dolphin in the offshore eastern tropical Pacific. Length at birth is estimated to be 85.4 cm for the northern population and 83.2 cm for the southern population. Analyses of series of monthly distributions of length revealed two cohorts born each year in the northern population, at least in the northern inshore part of its geographic range, but only one cohort born each year in the southern population. Growth curves fitted to the means of the monthly distributions of length gave estimates of length at 1 year of 126.2 and 132.6 cm and length at 2 years of 154.3 and 154.9 cm for the two cohorts in the northern population. and length at 1 year of 127.9 cm for the southern population. A growth curve fitted to lengths and ages (in dental growth layer groups) from the northern population gave estimates of lengths at 1 and 2 years of 123.0 and 143.0 cm, respectively.
Resumo:
本文集收入了著名力学家、应用数学家、中国科学院院士谈镐生先生在流体力学、稀薄气体动力学和应用数学研究领域的论文和研究报告26篇,谈镐生先生倡导和支持力学基础研究的有关文章和论述21篇,谈先生的学术活动和生活图片多幅,以及谈镐生先生生平,最后附有谈先生生平年表。
目录
科技论文
Theaerodynamics of supersonic biplanes
Strength of reflected shock in Mach reflection
On laminar boundary layer over arotating blade
A unique law for ideal incompressible flow with preserved pattern off initeseparation
On motion of submerged cylinder
On source and vortex off luctuating strength U~aveling beneath a free surface
Wave sproduced by a pulsating source U~ave lingbeneath a free surface
On optimum nose Curves form issiles in the superaerodynamic regime
On optimum nose Curves for superaerodynamic missiles
On a special bolzavariational problem and the minimization of superaerodynamic
Hypersonic nose drag
Nose drag in free-molecule flow and its minimization
Final mdash;stagedecay of a single line vortex
Final stage decay of grid—produced turbulence
Resumo:
This paper sets out an optimum synthesis methodology for wheel profiles of railway vehicles in order to secure good dynamic behaviour with different track configurations. Specifically, the optimisation process has been applied to the case of rail wheelsets mounted on double gauge bogies, that move over two different gauges, which also have different types of rail: the Iberian gauge (1668 mm) and the UIC gauge (1435 mm). Optimisation is performed using Genetic Algorithms and traditional optimisation methods in a complementary way. The objective function used is based on an ideal equivalent conicity curve which ensures good stability on straight sections and also proper negotiation of curves. To this end the curve is constructed in such a way that it is constant with a low value for small lateral wheelset displacements (with regard to stability), and increases as the displacements increase (to facilitate negotiation of curved sections). Using this kind of ideal conicity curve also enables a wheel profile to be secured where the contact points have a larger distribution over the active contact areas, making wear more homogeneous and reducing stresses. The result is a wheel profile with a conicity that is closer to the target conicity for both gauges studied, producing better curve negotiation while maintaining good stability on straight sections of track. The paper shows the resultant wheel profile, the contact curves it produces, and a number of dynamic analyses demonstrating better dynamic behaviour of the synthesised wheel on curved sections with respect to the original wheel.
Resumo:
A stock assessment of the gulf menhaden. Brevoortia patronus, fishery was conducted with data on purse-seine landings from 1946 to 1985 and port sampling data from 1964 to 1985. These data were analyzed to determine growth rates, yield-per-recruit, spawner-recruit relationships, and maximum sustainable yield (MSY). Virtual population analysis was used to estimate stock size, year-class size, and fishing mortality rates. During the period studied, an average of 27% of age-l fish and 55% of age-2 and age-3 fish were taken by the fishery, and 54% for age-I and 38% for age-2 and -3 fish were lost annually to natural causes. Annual yield-per-recruit estimates ranged from 6.9 to 19.3 g, with recent mean conditions averaging 12.2 g since 1978. Surplus production models produced estimates of MSY from 620 to 700 kilometric tons. Recruits to age-I ranged from 8.3 to 41.8 billion fish for 1964-82. Although there was substantial scatter about the fitted curves, Ricker·type spawner-recruit relationships were found suitable for use in a population simulation model. Estimates of MSY from population simulation model runs ranged from 705 to 825 kilometric tons with F -multiples of the mean rate of fishing ranging from 1.0 to 1.5. Recent harvests in excess of the historical MSY may not be detrimental to the gulf menhaden stock. However, one should not expect long-term harvesting above the historical MSY because of the short life span of gulf menhaden and possible changes from currently favorable environmental conditions supporting high recruitment.(PDF file contains 24 pages.)
Resumo:
10 p.