Finite element modeling of carbon fibre reinforced polymer (CFRP) strengthened steel tubes under axial impact

Steel hollow sections used in structures such as bridges, buildings and space structures involve different strengthening techniques according to their structural purpose and shape of the structural member. One such technique is external bonding of CFRP sheets to steel tubes. The performance of CFRP strengthening for steel structures has been proven under static loading while limited studies have been conducted on their behaviour under impact loading. In this study, a comprehensive numerical investigation is carried out to evaluate the response of CFRP strengthened steel tubes under dynamic axial impact loading. Impact force, axial deformation impact velocities are studied. The results of the numerical investigations are validated by experimental results. Based on the developed finite element (FE) model several output parameters are discussed. The results show that CFRP wrapping is an effective strengthening technique to increase the axial dynamic load bearing capacity by increasing the stiffness of the steel tube.

Dynamic simulation of CFRP strengthened steel column under impact loading

Carbon fibre reinforced polymer (CFRP) strengthening of metallic structures under static loading has shown great potential in the recent years. However, steel structures are often experienced natural (e.g. earthquake, wind) as well as man-made (e.g. vehicular impact, blast) dynamic loading. Therefore, there is a growing interest among the researchers to investigate the capability of CFRP strengthened members under such dynamic conditions. This study focuses on the finite element (FE) numerical modelling and simulation of CFRP strengthened steel column under transverse impact loading to predict the behaviour and failure modes. Impact simulation process and the CFRP strengthened steel column are validated with the existing experimental results in literature. The validated FE model of CFRP strengthened steel column is then further used to investigate the effects of transverse impact loading on its structural performance. The results are presented in terms of transvers e impact force, lateral and axial displacement, and deformed shape to evaluate the effectiveness of CFRP strengthening technique. Comparisons between the bare steel and CFRP strengthened steel columns clearly indicate the performance enhancement of strengthened column under transverse impact loading.

A theory of process modeling impact

Process modeling – the design and use of graphical documentations of an organization’s business processes – is a key method to document and use information about the operations of businesses. Still, despite current interest in process modeling, this research area faces essential challenges. Key unanswered questions concern the impact of process modeling in organizational practice, and the mechanisms through which impacts are developed. To answer these questions and to provide a better understanding of process modeling impact, I turn to the concept of affordances. Affordances describe the possibilities for goal-oriented action that a technical object offers to a user. This notion has received growing attention from IS researchers. The purpose of my research is to further develop the IS discipline’s understanding of affordances and impacts from information objects, such as process models used by analysts for information systems analysis and design. Specifically, I seek to extend existing theory on the emergence, perception and actualization of affordances. I develop a research model that describes the process by which affordances emerge between an individual and an object, how affordances are perceived, and how they are actualized by the individual. The proposed model also explains the role of available information for the individual, and the influence of perceived actualization effort. I operationalize and test this research model empirically, using a full-cycle, mixed methods study consisting of case study and experiment.

The impact of frailty and polypharmacy on adverse outcomes in older inpatients

Background Older people are at significant risk of adverse outcomes as a result of changes in physiology, frailty, co-morbidity and polypharmacy.1 Timely identification of high-risk patients may facilitate the optimization of medication and reduce the incidence of adverse outcomes. The aims of this study were to evaluate in older inpatients the relationships between risk factors, including frailty and polypharmacy, and adverse health outcomes. Methods This is a prospective study of 1418 patients, aged 70 and older, admitted to general medical units in 11 acute care hospitals across Australia. The interRAI Acute Care (interRAI AC) assessment tool was used for data collection. Frailty status was measured using a Frailty Index (FI), adding each individual’s deficits and dividing by the total number of deficits considered. Adverse health outcomes included falls in hospital, delirium, in-hospital functional and cognitive decline, discharge to a higher level of care and inpatient mortality. Results Patients had a mean age 81 ± 6.8 years with a median length of hospital stay of 6 days (interquartile range 4 to 11 days); 701 (50%) experienced at least one adverse outcome. Polypharmacy (5-9 drugs per day) was observed in almost half of the study population (n=695, 49%) and hyper-polypharmacy (≥10 drugs) observed in about one-third of patients (n=490, 34.6%). Cognitive impairment was shown to be associated with the lower rate of prescribing. FI had a significant association with all adverse outcomes studied (p = <0.05). In contrast, no association was observed between polypharmacy categories and adverse outcomes except for those on 10 or more drugs where they were more likely to be discharged to a higher level of care (p= 0.014). Conclusions Among older inpatients, frailty status was a significant predictor of adverse outcomes. Lower rates of prescribing to patients with cognitive impairment may underpin the lack of an association between polypharmacy and adverse outcomes in this cohort. References: 1. Olsson IN, Runnamo R, Engfeldt P. Medication quality and quality of life in the elderly, a cohort study.Health Qual Life Outcomes.2011;9:95

The impact of the environment on health in Mongolia : a systematic review

Mongolia has significant exposure to environmental risk factors because of poor environmental management and behaviors, and children are increasingly vulnerable to these threats. This study aimed to assess levels of exposure and summarize the evidence for associations between exposures to environmental risk factors and adverse health outcomes in Mongolia, with a particular focus on children. A systematic review was conducted using the PubMed, EMBASE, Web of Science, Global Health Library, CINAHL, CABI, Scopus, and mongolmed.mn electronic databases up to April 2014 . A total of 59 studies meeting the predetermined criteria were included. Results indicate that the Mongolian population has significant exposure to outdoor and indoor air pollution, metals, environmental tobacco smoke, and other chemical toxins, and these risk factors have been linked to respiratory and cardiovascular diseases among adults and respiratory diseases and neurodevelopmental disorders among children. Well-designed epidemiological investigations in vulnerable populations especially in pregnant women and children are recommended.

Establishing the impact of temporary tissue expanders on electron and photon beam dose distributions

Purpose: This study investigates the effects of temporary tissue expanders (TTEs) on the dose distributions in breast cancer radiotherapy treatments under a variety of conditions. Methods: Using EBT2 radiochromic film, both electron and photon beam dose distribution measurements were made for different phantoms, and beam geometries. This was done to establish a more comprehensive understanding of the implant’s perturbation effects under a wider variety of conditions. Results: The magnetic disk present in a tissue expander causes a dose reduction of approximately 20% in a photon tangent treatment and 56% in electron boost fields immediately downstream of the implant. The effects of the silicon elastomer are also much more apparent in an electron beam than a photon beam. Conclusions: Evidently, each component of the TTE attenuates the radiation beam to different degrees. This study has demonstrated that the accuracy of photon and electron treatments of post-mastectomy patients is influenced by the presence of a tissue expander for various beam orientations. The impact of TTEs on dose distributions establishes the importance of an accurately modelled high-density implant in the treatment planning system for post-mastectomy patients.

The impact of socialisation on graduates’ public service motivation : a mixed method study

The need to attract and retain a high calibre cadre of public servants today has resulted in a renaissance of interest in public service motivation (PSM) within public management literature. This article outlines a study of PSM with graduate employees within an Australian public sector. The study extends our understanding of PSM by adopting a longitudinal, mixed method design, including surveys and individual interviews, to consider the effects of socialisation on levels of PSM. Results show an organisation's mission and values do not affect individual PSM while work type and communication style is vital and organisational socialisation can provide a negative influence.

The impact of relaxing music on insomnia-related thoughts and behaviours

Insomnia is a pervasive problem involving poor sleep quality and quantity. Previous research has suggested that music listening can help alleviate insomnia, but exactly how music helps sleep problems has not been determined. A greater understanding of these processes could help practitioners to design more effective music-based insomnia treatments. This randomised controlled trial was designed to assess the influences of nightly music listening on the sleep-related thoughts and behaviours described in Harvey’s (2002) cognitive model of insomnia maintenance. University students, including a range of good and poor sleepers, were randomly assigned to a music listening group or a control group and were assessed before and after a two-week music listening intervention. Measures included a range of self-report scales, each assessing an element of Harvey’s cognitive model. During the intervention, the music listening group was asked to listen to provided music for at least 20 minutes each night. The control group was asked to maintain their regular nightly routines. Results indicated that the music listening group significantly improved on most of the factors theorised to influence sleep quality, although their actual sleep quality did not significantly improve. The control group did not change significantly on any measures. The results of this study suggest that music listening can have positive impacts on a range of factors theorised to influence sleep quality. However, as the music was not shown to actually improve sleep quality, Harvey’s cognitive model explanation of music’s effect on sleep quality may require further investigation.

Who really pays for urban infrastructure? : the impact of developer infrastructure charges on housing affordability in Brisbane, Australia

This thesis advances the understanding of the impact of developer infrastructure charges on housing affordability in Brisbane, Australia through the development of an econometric model and empirical analysis. The results indicate substantial on-passing of these government charges to purchasers of both new and existing homes, thus negatively impacting housing affordability across the whole community. The results of this thesis will inform policy makers and assist in the development of evidence based policy related to housing affordability and funding of urban infrastructure. Being generic, the econometric model is expected to be a tool that is suitable for estimating similar house price effects in other housing markets.

Growth medium selection and its economic impact on plasmid DNA production

Current developments in gene medicine and vaccination studies are utilizing plasmid DNA (pDNA) as the vector. For this reason, there has been an increasing trend towards larger and larger doses of pDNA utilized in human trials: from 100-1000 μg in 2002 to 500-5000 μg in 2005. The increasing demand of pDNA has created the need to revolutionalize current production levels under optimum economy. In this work, different standard media (LB, TB and SOC) for culturing recombinant Escherichia coli DH5α harbouring pUC19 were compared to a medium optimised for pDNA production. Lab scale fermentations using the standard media showed that the highest pDNA volumetric and specific yields were for TB (11.4 μg/ml and 6.3 μg/mg dry cell mass respectively) and the lowest was for LB (2.8 μg/ml and 3.3 μg/mg dry cell mass respectively). A fourth medium, PDMR, designed by modifying a stoichiometrically-formulated medium with an optimised carbon source concentration and carbon to nitrogen ratio displayed pDNA volumetric and specific yields of 23.8 μg/ml and 11.2 μg/mg dry cell mass respectively. However, it is the economic advantages of the optimised medium that makes it so attractive. Keeping all variables constant except medium and using LB as a base scenario (100 medium cost [MC] units/mg pDNA), the optimised PDMR medium yielded pDNA at a cost of only 27 MC units/mg pDNA. These results show that greater amounts of pDNA can be obtained more economically with minimal extra effort simply by using a medium optimised for pDNA production.