Diameter structure of stratum and ecological groups of a Semideciduous Forest area in Dionísio-MG

The objective of this study was to obtain homogeneous groups of species and information on their density, dominance and volume, in terms of ecological group and diameter structure of an area of Submontane Semideciduous forest (Mata do Mumbaça) in Dionísio, MG. This work was conducted with data of the diameter distribution per species from floristic and phytosociological (Mata do Mumbaça) survey of 120 plots with 10 x 10 m each one. The 120 plots were contiguous and corresponding to a total sample area of 12,000 m² distributed over the topographic units (Low Ramp, Lower Slope, Upper Slope and Hill Top). The topographic units Low Ramp, Lower Slope and Upper Slope were in the middle stage of succession as they presented incipient stratification into two strata (canopy and understory) i.e. canopy ranging from 5 to 12 m high. However, the stratum Hill Top was classified as intermediate/advanced succession because it had a total height equal to or greater than 12 m. The distribution of individual trees of the four strata on diameter classes showed a typical J-inverted pattern that is, high concentration of individuals in smaller diameter classes and a sharp reduction towards the larger classes. In relation to absolute dominance and total volume of species, the ecological group that stood out in the four strata (Low Ramp, Lower Slope, Upper Slope and Hill Top) was the initial secondary, which were in the intermediate stage of secondary, rapidly developing into the mature phase.

Application of Computational Fluid Dynamics in Modeling Blood Flow in Human Thoracic Aorta

The aim of this study was to simulate blood flow in thoracic human aorta and understand the role of flow dynamics in the initialization and localization of atherosclerotic plaque in human thoracic aorta. The blood flow dynamics in idealized and realistic models of human thoracic aorta were numerically simulated in three idealized and two realistic thoracic aorta models. The idealized models of thoracic aorta were reconstructed with measurements available from literature, and the realistic models of thoracic aorta were constructed by image processing Computed Tomographic (CT) images. The CT images were made available by South Karelia Central Hospital in Lappeenranta. The reconstruction of thoracic aorta consisted of operations, such as contrast adjustment, image segmentations, and 3D surface rendering. Additional design operations were performed to make the aorta model compatible for the numerical method based computer code. The image processing and design operations were performed with specialized medical image processing software. Pulsatile pressure and velocity boundary conditions were deployed as inlet boundary conditions. The blood flow was assumed homogeneous and incompressible. The blood was assumed to be a Newtonian fluid. The simulations with idealized models of thoracic aorta were carried out with Finite Element Method based computer code, while the simulations with realistic models of thoracic aorta were carried out with Finite Volume Method based computer code. Simulations were carried out for four cardiac cycles. The distribution of flow, pressure and Wall Shear Stress (WSS) observed during the fourth cardiac cycle were extensively analyzed. The aim of carrying out the simulations with idealized model was to get an estimate of flow dynamics in a realistic aorta model. The motive behind the choice of three aorta models with distinct features was to understand the dependence of flow dynamics on aorta anatomy. Highly disturbed and nonuniform distribution of velocity and WSS was observed in aortic arch, near brachiocephalic, left common artery, and left subclavian artery. On the other hand, the WSS profiles at the roots of branches show significant differences with geometry variation of aorta and branches. The comparison of instantaneous WSS profiles revealed that the model with straight branching arteries had relatively lower WSS compared to that in the aorta model with curved branches. In addition to this, significant differences were observed in the spatial and temporal profiles of WSS, flow, and pressure. The study with idealized model was extended to study blood flow in thoracic aorta under the effects of hypertension and hypotension. One of the idealized aorta models was modified along with the boundary conditions to mimic the thoracic aorta under the effects of hypertension and hypotension. The results of simulations with realistic models extracted from CT scans demonstrated more realistic flow dynamics than that in the idealized models. During systole, the velocity in ascending aorta was skewed towards the outer wall of aortic arch. The flow develops secondary flow patterns as it moves downstream towards aortic arch. Unlike idealized models, the distribution of flow was nonplanar and heavily guided by the artery anatomy. Flow cavitation was observed in the aorta model which was imaged giving longer branches. This could not be properly observed in the model with imaging containing a shorter length for aortic branches. The flow circulation was also observed in the inner wall of the aortic arch. However, during the diastole, the flow profiles were almost flat and regular due the acceleration of flow at the inlet. The flow profiles were weakly turbulent during the flow reversal. The complex flow patterns caused a non-uniform distribution of WSS. High WSS was distributed at the junction of branches and aortic arch. Low WSS was distributed at the proximal part of the junction, while intermedium WSS was distributed in the distal part of the junction. The pulsatile nature of the inflow caused oscillating WSS at the branch entry region and inner curvature of aortic arch. Based on the WSS distribution in the realistic model, one of the aorta models was altered to induce artificial atherosclerotic plaque at the branch entry region and inner curvature of aortic arch. Atherosclerotic plaque causing 50% blockage of lumen was introduced in brachiocephalic artery, common carotid artery, left subclavian artery, and aortic arch. The aim of this part of the study was first to study the effect of stenosis on flow and WSS distribution, understand the effect of shape of atherosclerotic plaque on flow and WSS distribution, and finally to investigate the effect of lumen blockage severity on flow and WSS distributions. The results revealed that the distribution of WSS is significantly affected by plaque with mere 50% stenosis. The asymmetric shape of stenosis causes higher WSS in branching arteries than in the cases with symmetric plaque. The flow dynamics within thoracic aorta models has been extensively studied and reported here. The effects of pressure and arterial anatomy on the flow dynamic were investigated. The distribution of complex flow and WSS is correlated with the localization of atherosclerosis. With the available results we can conclude that the thoracic aorta, with complex anatomy is the most vulnerable artery for the localization and development of atherosclerosis. The flow dynamics and arterial anatomy play a role in the localization of atherosclerosis. The patient specific image based models can be used to diagnose the locations in the aorta vulnerable to the development of arterial diseases such as atherosclerosis.

NON-DESTRUCTIVE ANALYSIS OF THE ROOT SYSTEM AND TREE GROWTH PARAMETERS

ABSTRACT The productivity of Eucalyptus at plantations is increasing and has undergone a variety of research studies. Most research is dealing with simple dendrometric variables like the DBH (diameter at breast height) and tree height, or more complex variables including crown parameters or variables concerning photosynthesis. The root systems, however, have not been well analyzed yet. The objective of the study was to analyze the root system with a non-destructive method and to evaluate possible correlations with dendrometric variables of the tree (DBH, height, crown expansion). A small experimental plantation with 39 even-aged, 6-year-old trees of Eucalyptus grandis x urophylla has been investigated within this study. The results of the study show the highest correlation of the root areas with the crown expansion. In general, the root area shows a significantly bigger expansion in the eucalypt plantation than the tree crown, with a more homogeneous development.

Frequency-Domain and Wide-Pulse Time-Domain Measurements of Lanthanide Luminescence and Lanthanide-Based Resonance Energy Transfer

Resonance energy transfer (RET) is a non-radiative transfer of the excitation energy from the initially excited luminescent donor to an acceptor. The requirements for the resonance energy transfer are: i) the spectral overlap between the donor emission spectrum and the acceptor absorption spectrum, ii) the close proximity of the donor and the acceptor, and iii) the suitable relative orientations of the donor emission and the acceptor absorption transition dipoles. As a result of the RET process the donor luminescence intensity and the donor lifetime are decreased. If the acceptor is luminescent, a sensitized acceptor emission appears. The rate of RET depends strongly on the donor–acceptor distance (r) and is inversely proportional to r6. The distance dependence of RET is utilized in binding assays. The proximity requirement and the selective detection of the RET-modified emission signal allow homogeneous separation free assays. The term lanthanide-based RET is used when luminescent lanthanide compounds are used as donors. The long luminescence lifetimes, the large Stokes’ shifts and the intense, sharply-spiked emission spectra of the lanthanide donors offer advantages over the conventional organic donor molecules. Both the organic lanthanide chelates and the inorganic up-converting phosphor (UCP) particles have been used as donor labels in the RET based binding assays. In the present work lanthanide luminescence and lanthanide-based resonance energy transfer phenomena were studied. Luminescence lifetime measurements had an essential role in the research. Modular frequency-domain and time-domain luminometers were assembled and used successfully in the lifetime measurements. The frequency-domain luminometer operated in the low frequency domain ( 100 kHz) and utilized a novel dual-phase lock-in detection of the luminescence. One of the studied phenomena was the recently discovered non-overlapping fluorescence resonance energy transfer (nFRET). The studied properties were the distance and temperature dependences of nFRET. The distance dependence was found to deviate from the Förster theory and a clear temperature dependence was observed whereas conventional RET was completely independent of the temperature. Based on the experimental results two thermally activated mechanisms were proposed for the nFRET process. The work with the UCP particles involved the measurement of the luminescence properties of the UCP particles synthesized in our laboratory. The goal of the UCP particle research is to develop UCP donor labels for binding assays. In the present work the effect of the dopant concentrations and the core–shell structure on the total up-conversion luminescence intensity, the red–green emission ratio, and the luminescence lifetime was studied. Also the non-radiative nature of the energy transfer from the UCP particle donors to organic acceptors was demonstrated for the first time in aqueous environment and with a controlled donor–acceptor distance.

Production of baruzeiro seedling in different protected environments and substrates

The high seedlings quality is essential for deployment of homogeneous orchards. This study evaluated the baruzeiro (Dipteryx alata Vog) seedlings formation on different substrates within protected environments. It was used substrates with100% of cattle manure; 100% of cassava stems; 100% of vermiculite; 50% of cattle manure + 50% of cassava stems; 50% of cattle manure + 50% of vermiculite; 50% of cassava stems + 50% of vermiculite; and + ⅓ of cattle manure + ⅓ of cassava stems + ⅓ of vermiculite. These substrates were tested in protected areas: greenhouse; black shade net of 50% shading; and aluminized thermo-reflective screen of 50% shading. A completely randomized experimental design with five replicates of four plants was adopted. Initially, data were submitted to analysis of individual variance of the substrates, in each environment of cultivation, then performing the evaluation of the residual mean square and the analysis of these environments together for comparison. The best substrate for baruzeiro seedlings was pure vermiculite. The substrates with 100% of manure and the substrate with 33.33% of the mixed studied materials can be used for seedlings formation. The environment with screen can be indicated for the production of baruzeiro seedlings, since it gave vigor to the seedlings.

Evaluation of the heating of broilers in shed by means of gas hoods and underfloor heating

This study was conducted to evaluate and compare the behavior of the heating inside poultry shed through gas hood and underfloor heating. The experiment was conducted in poultry shed belonging to the Federal Institute of Education, Science and Technology of Triângulo Mineiro Region, Uberlândia city – state of Minas Gerais (MG), Brazil. The dimensions of the shed are 24 meters long and 9.6 meters wide and with a ceiling height of 3.2 meters. The temperature was measured with an optical thermometer of Minipa brand, MT 350 model. It was used, to the analysis of temperature behavior, the public domain software FEMM 4.2, which uses finite elements techniques, with data collected from two lots. Underfloor heating is made using hot water flowing through a serpentine type system, which is installed below the bed; this hot water is from solar heaters. An energetic and economic assessment of the warming shed for raising chickens was realized. From the results obtained with the simulations, it may observe that the heating through the floor provides a more homogeneous distribution of temperature when compared with the hood heating. The flow of heat is upwards supplying, thus, the greatest need of heating of the bird, which is the pectoral part.

Effect of adjuvants on the amount of air included in droplets generated by spray nozzles

The air included in droplets generated by spray nozzles directly int0erferes in transport, deposition and retention of the droplets after its impact on the target. The objective of this study was to analyze the interference of adjuvants in the amount of air included in droplets generated by spray nozzles. The treatments were composed by four spray solutions containing mineral oil, vegetable oil, surfactant and water, and three spray nozzles, two air induction type and one pre-orifice. The air included was calculated by the difference between the volume of spray mix (air plus liquid) and only the liquid, which was made by means of sprayed samples captured in a funnel and collected in a graduated cylinder. The surface tension was estimated by the gravimetric method using a precision scale and a graduated pipette. The surfactant provided the largest percentage of air included in the spray. For the surface tension, the mineral oil and the surfactant had the lowest values. It was concluded that the use of adjuvants had a direct influence on the percentage of air included. In addition, products with greater ability to reduce surface tension and to form homogeneous solutions provided the increase in the percentage of air included in the droplet.

Analysis of the relationship intensity, duration, frequency of disaggregated daily rainfall in southern Rio Grande do Sul, Brazil

The intensity, duration, and frequency relationship (IDF) of rainfall occurrence may be done through continuous records of pluviographs or daily pluviometer values . The objective of this study was to estimate the intensity-duration-frequency relationships of precipitation, using the method of daily rainfall disaggregation, at weather stations located to the southern half of the state of Rio Grande do Sul; comparing them with those obtained by rain gauge records, in places considered homogeneous from the meteorological point of view. The IDF equation parameters were estimated from daily rainfall disaggregation data, using the method of nonlinear optimization. To validate the equations confidence indices and efficiency and the "t" Student test, among maximum intensity values obtained from the disaggregated daily rainfall durations of 10; 30; 60 min and 6; 12 and 24 h and those extracted from existing IDF equations. For all studied stations and return periods, the trust index values were regarded as "optimal", i.e., greater than 0.85. The maximal intensity of rainfall obtained by daily rainfall disaggregation have similarity with those obtained by relations IDF standards. Thus, the method constitutes a feasible alternative in obtaining the IDF relationships.

Physical properties of Brazil nuts

The Brazil-nut, also known as Para-nut, is widely used as food and in cosmetic industries. The seeds are rich in lipids and protein, and also present a considerable amount of selenium. Limited research has been conducted on postharvest of the Brazil nut, being an important information to design equipment related to aeration, drying, storage and transportation steps. Thus, the objective of this study was to determine the physical properties of the Brazil-nut with and without tegument. The dimensions found for the almonds with tegument were 39.35 mm in the X axis, 24.19 mm in the Y axis, and 17.88 mm in the Z axis. However for the almond without tegument the values were 31.05 mm in X, 14.38 in Y and 15.91 mm in Z axis. The sphericity was 66.40% and 51.59% for the kernels with and without seed tegument respectively. The kernels with and without tegument presented sphericity of 63.00% and 47.72% respectively. The mass of 1000 almonds was 6.13 kg for almond with teguments and 3.18 kg for almonds without teguments. Specific mass of 0.947 g.cm-3 and 1.003 g.cm-3 for the kernels with and without tegument, coupled with a porosity of 46.88% and 37.60% and, resulting on a bulk density of 0.504 g.cm-3 and 0.626 g.cm-3 for almonds with and without teguments respectively. Finally, the angle of repose for the kernels with teguments was 36.37°.

Multivariate statistical analysis to support the minimum streamflow regionalization

ABSTRACT This study aimed to develop a methodology based on multivariate statistical analysis of principal components and cluster analysis, in order to identify the most representative variables in studies of minimum streamflow regionalization, and to optimize the identification of the hydrologically homogeneous regions for the Doce river basin. Ten variables were used, referring to the river basin climatic and morphometric characteristics. These variables were individualized for each of the 61 gauging stations. Three dependent variables that are indicative of minimum streamflow (Q7,10, Q90 and Q95). And seven independent variables that concern to climatic and morphometric characteristics of the basin (total annual rainfall – Pa; total semiannual rainfall of the dry and of the rainy season – Pss and Psc; watershed drainage area – Ad; length of the main river – Lp; total length of the rivers – Lt; and average watershed slope – SL). The results of the principal component analysis pointed out that the variable SL was the least representative for the study, and so it was discarded. The most representative independent variables were Ad and Psc. The best divisions of hydrologically homogeneous regions for the three studied flow characteristics were obtained using the Mahalanobis similarity matrix and the complete linkage clustering method. The cluster analysis enabled the identification of four hydrologically homogeneous regions in the Doce river basin.

Spraying systems and traveling speed in the deposit and spectrum of droplets in cotton plant

ABSTRACT Tractor traveling speed can influence the quality of spraying depending on the application technology used. This study aimed to evaluate the droplet spectrum, the deposition and uniformity of spray distribution with different spraying systems and traveling speeds of a self-propelled sprayer in two phenological stages of the cotton plant (B9 and F13). The experimental design was randomized blocks and treatments were three spraying techniques: common flat spray tips; tilted flat jet with air induction, at 120 L ha-1; and rotary atomizer disk, 20 L ha-1, combined with four traveling speeds: 12, 15, 18 and 25 km h-1, with four replications. Spraying deposition was evaluated for both leaf surfaces from the cotton plant apex and base (stage B9) and middle part of the plant (stage F13) with a cupric marker. A laser particle analyzer also assessed the droplet spectrum. The centrifugal power spray system produces more homogeneous droplet spectrum and increased penetration of droplets into the canopy in both phenological stages. Variation on the operating conditions necessary for increased traveling speed negatively influences the pattern of spraying deposits.

Does a previous surgical experience interfere on psychic stress in patients submitted to major surgery?

OBJECTIVE: to evaluate the impact of stress in patients undergoing major surgeries under general anesthesia, relating their physical and psychic reactions to the different stages of stress. METHODS: we studied 100 adult patients of both genders, who were divided into two groups: Group 1 - 22 patients without experience with surgery; Group 2 - 78 patients previously submitted to medium and major surgery. To investigate the stress, we used the Inventory of Stress Symptoms for Adults, developed by Lipp, the day before the procedure and two days and seven days after the operation. The comparison of groups with respect to gender, pain, and percentage of stress were performed using the Chi-square test, and for the age variable the Student's t test was used. Differences were considered significant at p<0.05. RESULTS: the groups were not homogeneous as for the overall percentage of stress on the three measurements. G1 had decreased postoperative stress, whilst in G2 it increased. Psychological symptoms of stress prevailed in both groups. CONCLUSION: previous surgery reduced preoperative stress but did not affect postoperative emotional disorders.

Theoretical Analysis and Numerical Simulation of Spectral Radiative Properties of Combustion Gases in Oxy/Air-Fired Combustion Systems

Energy efficiency is one of the major objectives which should be achieved in order to implement the limited energy resources of the world in a sustainable way. Since radiative heat transfer is the dominant heat transfer mechanism in most of fossil fuel combustion systems, more accurate insight and models may cause improvement in the energy efficiency of the new designed combustion systems. The radiative properties of combustion gases are highly wavelength dependent. Better models for calculating the radiative properties of combustion gases are highly required in the modeling of large scale industrial combustion systems. With detailed knowledge of spectral radiative properties of gases, the modeling of combustion processes in the different applications can be more accurate. In order to propose a new method for effective non gray modeling of radiative heat transfer in combustion systems, different models for the spectral properties of gases including SNBM, EWBM, and WSGGM have been studied in this research. Using this detailed analysis of different approaches, the thesis presents new methods for gray and non gray radiative heat transfer modeling in homogeneous and inhomogeneous H2O–CO2 mixtures at atmospheric pressure. The proposed method is able to support the modeling of a wide range of combustion systems including the oxy-fired combustion scenario. The new methods are based on implementing some pre-obtained correlations for the total emissivity and band absorption coefficient of H2O–CO2 mixtures in different temperatures, gas compositions, and optical path lengths. They can be easily used within any commercial CFD software for radiative heat transfer modeling resulting in more accurate, simple, and fast calculations. The new methods were successfully used in CFD modeling by applying them to industrial scale backpass channel under oxy-fired conditions. The developed approaches are more accurate compared with other methods; moreover, they can provide complete explanation and detailed analysis of the radiation heat transfer in different systems under different combustion conditions. The methods were verified by applying them to some benchmarks, and they showed a good level of accuracy and computational speed compared to other methods. Furthermore, the implementation of the suggested banded approach in CFD software is very easy and straightforward.

Arterial hypertension and metabolic profile in patients with polycystic ovary syndrome

PURPOSE: To evaluate parameters related with arterial pressure and metabolic profile in women with polycystic ovary syndrome (POS). METHODS: This monocentric study at the University Hospital Endocrinology Section included 60 women aged 18-45 years, 42 being diagnosed with POS and acting as 18 controls. All women were subjected to transvaginal ultrasound and monitored for arterial pressure for 24 h in the ambulatory (MAP). Venous blood samples were taken between 07.00 and 09.00, after 12 h fasting. Basal (BG) and fasting glucose concentrations, total cholesterol and its fractions, triglycerides and insulin (to calculate the homeostatic assay insulin-resistance, HOMA-IR) were measured. Collected data were the mean arterial blood pressure (24-h awake/sleep cycle), arterial pressure nocturnal descensus, glycemia and fasting glucose for HOMA-IR, and lipid profile. The Student's t test was used to compare homogeneous variables; the Mann-Whitney test was used to compare non-homogeneous variables; the Pearson's correlation coefficient was used to search for correlation between the variables. The c² test was used for comparison of the absence of nocturnal descensus. Significance was taken as p<0.05. RESULTS: The mean age of the patients with POS was 27.4±5.5 (18-45 years, n=42) and the body mass index (BMI) was 30.2±6.5 kg/m² (18.3-54.9). In the Control Group, the mean age was 31.4±6.1 (18-45 years) and the BMI was 27.1±6.2 kg/m² (18.3-54.9, n=18). No difference in the metabolic parameters and insulin resistance was observed between the two groups. Comparison between these parameters and MAP showed that the only parameter with a correlation was the BMI, independent of the POS diagnosis. This was not seen in nocturnal descensus, which was uncorrelated with POS and any of the other studied parameters. CONCLUSION: POS women do not show higher arterial blood pressure, glycemia, HDL-col, TG, HOMA-IR and BMI compared to non-POS women. However, POS patients showed correlation between arterial pressure and BMI, suggesting that obesity is a primary factor involved in arterial pressure changes in these patients.

Imagining a New Society: Public Painting as Politics in Postwar Finland

The thesis is the first comprehensive study on Finnish public painting, public artworks generally referred to as murals or monumental paintings. It focuses on the processes of production of public paintings during the post-WWII decades in Finland and the complex relationships between the political sphere and the production of art. The research studies the networks of agents involved in the production of public paintings. Besides the human agents—artists, assistants, commissioners and viewers—also public paintings were and are agents in the processes of production and in their environments. The research questions can be grouped into three overlapping series of questions: First, the research investigates the production public paintings: What kinds of public paintings were realised in postwar Finland—how, where, by whom and for what purposes? Second, it discusses the publicness of these paintings: How were public paintings defined, and what aspects characterised them as “public”? What was their relation to public space, public authorities, and audience? And third, it explores the politics of public paintings: the relationship between Finnish public painting, nationalism, and the memory of war. To answer these questions, extensive archival work has been performed, and over 200 public paintings have been documented around Finland. The research material has been studied in a sociological framework and in the context of the political and economic history of Finland, employing critical theories on public space and public art as well as theories on the building of nationalism, commemoration, memory, and forgetting. An important aim of this research was to open up a new field of study and position public painting within Finnish art history, from which it has been conspicuous by its absence. The research indicates that public painting was a significant genre of art in postwar Finland. The process of creating a national genre of public painting participated in the defining of municipal and state art politics in the country, and paintings functioned as vehicles of carrying out the agenda of the commissioning bodies. In the formation of municipal art policies in Finland in the 1950s, public painting connected to the same tendency of democratising art as the founding of public art museums. Public painting commissions also functioned as an arena of competition and a means of support for the artists. Public paintings were judged and commissioned within the realm of political decision-making, and they suggested the values of the decision-making groups, generally conveyed as the values of the society. The participation of official agents in the production allocated a position of official art to the genre. Through the material of this research, postwar public painting is seen as an agent in a society searching for a new identity. The postwar public painting production participated in the creation of the Finnish welfare society as indications of a humane society. It continued a tradition of public art production that had been built on nationalist and art educational ideologies in the late 19th and early 20th century. Postwar public paintings promoted the new national narrative of unification by creating an image of a homogeneous society with a harmonious communal life. The paintings laid out an image of Finnishness that was modern but rooted in the agrarian past, of a society that was based on hard work and provided for its members a good life. Postwar public painting was art with a mission, and it created an image of a society with a mission.