Dimensões do corredor bucal e sua relação com a distância inter pré-molar e intercomissural

The objective of the study was to analyze the size of buccal corridor during the smile of individuals from 10 to 19 years of age and to determine whether there is a relationship among buccal corridor, inter premolar distance, inter commissure width. Standard digital frontal photographs in posed broad smiles and dental casts were taken of a sample of 150 individuals divided into 5 age groups of 30 individuals: 10-11 years old (G1), 12-13 years old (G2), 14-15 years old (G3), 16-17 years old (G4), 18-19 years old (G5). Distances among the cusps of superior first premolars and buccal corridors were measured for subsequent comparisons using the Image Tool 3.0 program. Data was analyzed using Anova. The SNK test and Tamhane test were applied. The mean values of the buccal corridor ranged from 4.00-to 10.69 mm on the right side and from 4.06 to 11.43 mm on the left side. In percentage related with intercomissure width each side of the buccal corridor ranged from 7.46 to 16.47% on the right side and from 7.58% to 17.61% on the left side. Buccal corridors were different between genders and increased with age. Males have bigger buccal corridors than females, but there is no difference between gender when calculated as a percentage related with the inter commissure width. The inter premolar width is significantly correlated with inter commissure widths of female individuals 14-15 years old and 18-19 years old, and with the right linear buccal corridor of males and females aged 14-15 years old.

Confecção e montagem do set-up ortodôntico

Diagnosis and planning stages are critical to the success of orthodontic treatment, in which the orthodontist should have many elements that contribute to the most appropriate decision-making. The orthodontic set-up is an important resource in the planning of corrective orthodontics therapy. It consists of the repositioning of the teeth previously removed from the study dental casts and reassembled on its remaining basis. When properly made, the set-up allows a three-dimensional preview of problems and limitations of the case, assisting in decision-making regarding tooth extractions in cases with problems of space, amount of anchorage loss extent and type of tooth movement, discrepancy of dental arch perimeter, discrepancy of inter-arch tooth volume, among others, indicating the best option for treatment. This paper outlines the most important steps for its confection, an evaluation system and its application in the preparation of orthodontic treatment planning.

Montagem e confecção do set up ortodôntico

Diagnosis and planning stages are critical to the success of orthodontic treatment, in which the orthodontist should have many elements that contribute to the most appropriate decision-making. The orthodontic set-up is an important resource in the planning of corrective orthodontics therapy. It consists of the repositioning of the teeth previously removed from the study dental casts and reassembled on its remaining basis. When properly made, the set-up allows a three-dimensional preview of problems and limitations of the case, assisting in decision-making regarding tooth extractions in cases with problems of space, amount of anchorage loss extent and type of tooth movement, discrepancy of dental arch perimeter, discrepancy of inter-arch tooth volume, among others, indicating the best option for treatment. This paper outlines the most important steps for its confection, an evaluation system and its application in the preparation of orthodontic treatment planning.

Estudo comparativo da inclinação do plano oclusal de modelos para cirurgia ortognática montados em dois tipos de articuladores semi-ajustáveis

Purpose: The aim of this study was to compare occlusal plane angulation measured in two different types of semi-adjustable articulators with that obtained on the lateral cephalometric radiograph. Materials and Methods: 20 patients due to undergo orthognathic surgery had dental casts mounted in two different types of semi-adjustable articulators through face bow transfer from the position of the maxilla and occlusal recording to the mandible. After mounting, the inclination of the occlusal plane in the articulators was measured and compared with the inclination measured at on both articulators and compared with the inclination measured on the lateral cephalometric radiographs and between the articulators themselves. The results obtained werestatistically analyzed. Results: Mean angulation values for the Bio Art (7.55º) and Kavo (-5.70º) articulators differ by 13.25º, which is statistically significant (p=0.00). When individually compared to the lateral cephalometric radiograph (5.075º), the Bio Art articulator showed more similar angulation values, with a difference of 2.475º, while the Kavo articulator presented a difference of 10.775º. Conclusion: Neither of the models of semi-adjustable articulators accurately reproduced the inclination of the maxillary occlusal plane of patients with dentofacial deformities; the difference between the two articulators tested and the lateral cephalometric radiograph was lower for the Bio Art than for the Kavo articulator.

Avaliação da alteração dimensional de modelos obtidos a partir de moldagens com alginato tradicional e outro com desinfetante

The present study aims at evaluating dimensional alteration of stone casts made from impressions with a standard irreversible hydrocolloid and an antimicrobial one. For this, an alginate without disinfectant (Type II Jeltrate) and other containing chlorhexidine (Type II Avagel) were used, which rose by the same regime of treatment: without disinfection; immersion; and spraying. A 1% sodium hypochlorite solution was used for 10 minutes. To obtain the impressions, a perforated impression tray was made from a standard metal model. After molding, the molds were washed in running water for 30 seconds to simulate removal of saliva. Then, with the exception of the control group, these molds were subjected to disinfection treatment. After 10 minutes they were washed again. 60 samples poured with type V special gypsum (Durone) were obtained, that were measured 3 times in a stereomicroscope (SZX12, Olympus) to record the average of dimensional alterations. The disinfection treatment did not bring significant changes in the models obtained from both alginate tested (standard p = 0.7102; with chlorhexidine p = 0.5832). The results showed a statistically significant and additional advantage of the traditional alginate on alginate with chlorhexidine, with respect to dimensional alteration (p < 0.05).

Calibração e teste do modelo CROPGRO para a cultura do feijão

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

Modelos agrometeorológicos estatísticos de previsão de produtividade e qualidade para cana-de-açúcar

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

Estudo de propriedades da resina acrílica termoativada por energia de micro-ondas frente às variações nos procedimentos de inclusão

On heat cured acrylic resins by microwaves energy the action of electromagnetic waves on methylmethacrylate promote the polymerization process. However, part of this energy is absorbed by the gypsum present in the flask and the function of this gypsum is to maintain the characteristics of specimen, nevertheless is unknown in the literature as the amount of water present in this gypsum affects the characteristics of acrylic resin. The proposal of this study was verified if dried gypsum influenced in some properties of the acrylic resins thermally activated by microwaves: presence of porosity, microhardness, roughness, flexural strength and dimensional change. Two different types of acrylic resin for complete denture were utilized: Lucitone 550 e Vipi-Wave and groups were formed: Lucitone 550, polymerization by microwave energy without gypsum treatment; Lucitone 550, polymerization by microwave energy with pretreatment gypsum; Vipi-Wave by microwave energy without gypsum treatment; Vipi Wave, polymerization by microwave energy with pretreatment gypsum; Lucitone 550 control group polymerization in hot water bath. For both situations were performed analysis of microhardness and porosity three different metallic shaped specimens were formed with followed dimensions: 2,0x2,0x2,0cm (8cm3); 2,0x2,0x1,0 (4cm3) e 2,0x2,0x0,5 (2cm3). Standardized wax specimens was used to prepare groups (n=9) and included in glass fiber flasks. The gypsum dry was made by microwave oven cycle (10min and 600W) and then the flasks were maintained in dry oven during two hours. Polymerizations of specimens were made and then polished. Wax patterns #7 obtained from the metal were embedded in plastic flask and following the processes of pressing and polymerization of the resin according to established groups. To evaluate the flexural strength, specimens 65mm x 10mm x 3.0mm from metallic patterns in bar format were made. ...

Atributos químicos da solução e do solo após aplicação de resíduo da extração de celulose

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Lodo de esgoto e adubação mineral na recuperação de atributos químicos de solo degradado

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Preparo do solo e emissão de CO2, temperatura e umidade do solo em área canavieira

Soil tillage is one of the agricultural practices that may contribute to increase the loss of carbon through emission of CO2 (FCO2). The aim of this study was to investigate the effect of three soil tillage systems on FCO2, soil temperature and soil moisture in a sugarcane area under reform. The experimental area consisted of three tillage plots: conventional tillage (CT), conventional subsoiling (CS), and localized subsoiling (LS). FCO2, soil temperature and soil moisture were measured over a period of 17 days. FCO2 showed the highest value in CT (0.75 g CO2 m(-2) h(-1)). Soil temperature presented no significant difference (p > 0.05) between LS (26.2 degrees C) and CS (25.9 degrees C). Soil moisture was higher in LS (24%), followed by CS (21.8%) and CT (18.3%). A significant correlation (r = -0.71; p < 0.05) between FCO2 and soil temperature was observed only in CT. The conventional tillage presented a total emission (2,864.3 kg CO2 ha(-1)) higher than the emissions observed in CS (1,970.9 kg CO2 ha(-1)) and LS (1,707.7 kg CO2 ha(-1)). The conversion from CT to LS decreased soil CO2 emissions, reducing the contribution of agriculture in increasing the concentration of greenhouse gases in the atmosphere.

Inflection and stability points of diphasic logistic analysis of growth

Growth functions with inflection points following a diphasic model, can be adjusted by two approaches using segmented regression or the sum of two functions. In both cases, there are two functions, one for each phase, with inflection and stability points. However, when they are summed, the result is a new function and the points of inflection and stability are different from those obtained from using each function individually. A method to determine these points in a diphasic logistics sum of functions is suggested and the results obtained from fitting the models to eucalyptus growth data showed a better fit of the logistic diphasic sum as compared with segmented regression and monophasic logistic models.

Estoque de carbono e atributos físicos de um Latossolo em cronossequência sob diferentes manejos

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Reflexos da clarificação do caldo de cana com moringa sobre compostos inorgânicos do açúcar VHP

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Rentabilidade na semeadura cruzada da cultura da soja

Soybean cross-seeding tillage came from better spatial arrangement of plants per area, so some producers have opted for this tillage system, which consists in seeding the area in two steps, forming a chessboard with perpendicular lines of tillage. This study aims to analyse the soybean productivity and production costs when it planted in different dispositions of crossed tillage. The experiment was conducted during the harvests 2011/2012 and 2012/2013 at Lageado Farm of the FCA/UNESP, Botucatu-SP, in an area cultivated under no-tillage. The experimental design was in randomized block with five treatments and eight replications. The treatments were: seeding in parallel rows with recommended fertilization and recommended plant population (conventional); cross-seeding with doubled fertilization and doubled plant population; cross-seeding with recommended plant population and doubled fertilization; cross-seeding with doubled plant population and recommended fertilization; cross-seeding with fertilization and recommended plant population. The results showed statistical difference among the treatments, with increased productivity for the cross-seeding with doubled plant population and recommended fertilization. However the conventional tillage with parallel lines shows higher net earnings than soybean cross-seeding, being more profitable for producer.