Integración de la industria del gas natural en el Mercosur. Un modelo de redes

El objetivo de este trabajo es identificar la política óptima (considerando producción, transporte y regulación) para la integración de la industria de gas natural en el Mercosur. Se analizarán factores que promueven o limitan la integración en la región. Utilizando un modelo matemático de flujo de redes, se minimizará el costo total (producción y transporte) para la región en su conjunto, satisfaciendo las restricciones de producción, capacidad de transporte y equilibrio (oferta igual a demanda) en cada nodo. El costo total (CT) de la producción y transporte de gas natural (considerando nodos para cada país en la región) es la función objetivo. El proceso de optimización consiste en identificar el nivel de gas natural producido y transportado que minimiza el costo total del sistema para la región. El modelo es estático, no considerando una optimización dinámica con relación a las reservas remanentes. Restricciones Consideramos cuatro restricciones en operación, a saber: 1. Equilibrio en los nodos: esta ecuación establece el equilibrio entre la oferta y la demanda de gas natural en cada nodo. La oferta incluye la producción local y las importaciones. Por su parte, la demanda incluye el consumo doméstico más las exportaciones. 2. Capacidad de producción en cada cuenca: esta restricción establece que las cantidades producidas en cada cuenca debería ser menor o igual a su capacidad de producción. Ello también permite la existencia de una utilización no plena de la capacidad. La capacidad máxima de producción en cada cuenca está determinada sobre la base de una medida de política para cada país a través de la cual el horizonte de consumo de las reservas probadas está establecido. Dada esta relación, el límite sobre la producción de cada año está fijado. En otras palabras, el nivel de producción no está basado ni en la capacidad instalada de producción ni en los precios, sino en la política de agotamiento decidida sobre las reservas probadas en el año de calibración del modelo. Esto permite diferentes escenarios para el análisis. Para las simulaciones se tomó el ratio de reservas a producción en el año de calibración del modelo. 3. Capacidad de transporte: el gas transportado a través de un gasoducto (los operativos y aquellos que están en plan de construcción), en general, y el gas transportado desde cada cuenca a cada mercado, en particular, debería ser menor o igual a la capacidad del gasoducto. 4. Nivel no negativo de gas natural producido: esto evita la existencia de soluciones inconsistentes no sólo desde un punto de vista económico sino también técnico. Referencias Banco Interamericano de Desarrollo BID (2001). Integración Energética en el Mercosur Ampliado, Washington DC. Beato, Paulina and Juan Benavides (2004). Gas Market Integration in the Southern Cone. Inter-American Development Bank. Washington, D.C. Conrad, Jon M. (1999). Resource Economics. Cambridge University Press. United States of America. Dasgupta, P.S. and G. M. Heal (1979). Economic Theory and Exhaustible Resources. Cambridge University Press. United States of America. Dos Santos, Edmilson M, Victorio E. Oxilia Dávalos, and Murilo T. Werneck Fagá (2006). “Natural Gas Integration in Latin America: Forward or Backwards?”. Revue de l’Energie, Nº 571, mai-juin. Fagundes de Almeida, E.L. y Trebat, N. (2004). “Drivers and barriers to cross-border gas trade in the southern cone”. Oil, Gas & Energy Law Intelligence, Vol. 2, Nº 3, Julio. Givogri, Pablo (2007). “Condiciones de abastecimiento y precios de la industria del gas de Argentina en los próximos años”. Fundación Mediterránea. Julio. Córdoba, Argentina. Kozulj, Roberto (2004). “La industria del gas natural en América del Sur: situación y posibilidades de la integración de los mercados”. Serie Recursos Naturales e Infraestructura. Nº 77. CEPAL. Santiago de Chile, Chile. Diciembre.

The use of forensic polycyclic aromatic hydrocarbon signatures and Compound Ratio Analysis Techniques (CORAT) for the source characterisation of petrogenic/pyrogenic environmental releases.

This study utilised recent developments in forensic aromatic hydrocarbon fingerprint analysis to characterise and identify specific biogenic, pyrogenic and petrogenic contamination. The fingerprinting and data interpretation techniques discussed include the recognition of: The distribution patterns of hydrocarbons (alkylated naphthalene, phenanthrene, dibenzothiophene, fluorene, chrysene and phenol isomers), • Analysis of “source-specific marker” compounds (individual saturated hydrocarbons, including n-alkanes (n-C5 through 0-C40) • Selected benzene, toluene, ethylbenzene and xylene isomers (BTEX), • The recalcitrant isoprenoids; pristane and phytane and • The determination of diagnostic ratios of specific petroleum / non-petroleum constituents, and the application of various statistical and numerical analysis tools. An unknown sample from the Irish Environmental Protection Agency (EPA) for origin characterisation was subjected to analysis by gas chromatography utilising both flame ionisation and mass spectral detection techniques in comparison to known reference materials. The percentage of the individual Polycyclic Aromatic Hydrocarbons (PAIIs) and biomarker concentrations in the unknown sample were normalised to the sum of the analytes and the results were compared with the corresponding results with a range of reference materials. In addition, to the determination of conventional diagnostic PAH and biomarker ratios, a number of “source-specific markers” isomeric PAHs within the same alkylation levels were determined, and their relative abundance ratios were computed in order to definitively identify and differentiate the various sources. Statistical logarithmic star plots were generated from both sets of data to give a pictorial representation of the comparison between the unknown sample and reference products. The study successfully characterised the unknown sample as being contaminated with a “coal tar” and clearly demonstrates the future role of compound ratio analysis (CORAT) in the identification of possible source contaminants.

Instrumentation and software for the VERITAS Project and the detection of TeV Gamma-Ray Emission from the BL Lacertae Object 1ES1959+650

Transmission of Cherenkov light through the atmosphere is strongly influenced by the optical clarity of the atmosphere and the prevailing weather conditions. The performance of telescopes measuring this light is therefore dependent on atmospheric effects. This thesis presents software and hardware developed to implement a prototype sky monitoring system for use on the proposed next-generation gamma-ray telescope array, VERITAS. The system, consisting of a CCD camera and a far-infrared pyrometer, was successfully installed and tested on the ten metre atmospheric Cherenkov imaging telescope operated by the VERITAS Collaboration at the F.L. Whipple Observatory in Arizona. The thesis also presents the results of observations of the BL Lacertae object, 1ES1959+650, made with the Whipple ten metre telescope. The observations provide evidence for TeV gamma-ray emission from the BL Lacertae object, 1ES1959+650, at a level of more than 15 standard deviations above background. This represents the first unequivocal detection of this object at TeV energies, making it only the third extragalactic source seen at such levels of significance in this energy range. The flux variability of the source on a number of timescales is also investigated.

Neural correlates of target detection in the attentional blink

Attention, attentional blink, rapid serial visual presentation, RSVP, ERP, EEG, fMRI, gammaband, oscillatiory activity

Untersuchung des Flüssigkeitseintrages auf die Temperaturverteilung in Gas-/Feststoff-Wirbelschichten

Liquid separation efficiency, liquid penetration, modeling, arrays of temperature, distribution, fluidized bed, two-phase-nozzle

Analysis of energy efficiency of gas driven heat pumps

Magdeburg, Univ., Fak. für Verfahrens- und Systemtechnik, Diss., 2011

Ground penetrating radar signal processing for landmine detection

Ground penetrating radar; landmine; background clutter removal, buried targets detecting

imaging capabilities of ground penetrating radar for the detection of buries anti-personnel landmines

Subsurface Radar, Ground Penetrating Radar (GPR), Synthetic Aperture Radar (SAR), Anti-Personnel Landmine, Antenna Desing, Field Simulation, Focusing, Dielectric Lens, Geophysics, Soil Properties

Electrochemical high temperature membrane reactor for the processing of hydrogen-carbon monoxide gas mixtures

Magdeburg, Univ., Fak. für Verfahrens- und Systemtechnik, Diss., 2013

Computer-aided detection of cerebral aneurysms in angiographies

Magdeburg, Univ., Fak. für Informatik, Diss., 2013

Electrochemical oxidation of H 2, CO gas mixtures in polymer-electrolyte-membrane fuel cells

Magdeburg, Univ., Fak. für Verfahrens- und Systemtechnik, Diss., 2014

Citation-based Plagiarism Detection : applying citation pattern analysis to identify currently non-machine-detectible disguised plagiarism in scientific publications

Magdeburg, Univ., Fak. für Informatik, Diss., 2013

Experimental and theoretical analysis of the cyclic water gas shift reactor

Magdeburg, Univ., Fak. für Verfahrens- und Systemtechnik, Diss., 2015

Composition of Greenhouse Gas Emissions in Spain: an Input-Output Analysis

Extending the traditional input-output model to account for the environmental impacts of production processes reveals the channels by which environmental burdens are transmitted throughout the economy. In particular, the environmental input-output approach is a useful technique for quantifying the changes in the levels of greenhouse emissions caused by changes in the final demand for production activities. The inputoutput model can also be used to determine the changes in the relative composition of greenhouse gas emissions due to exogenous inflows. In this paper we describe a method for evaluating how the exogenous changes in sectorial demand, such as changes in private consumption, public consumption, investment and exports, affect the relative contribution of the six major greenhouse gases regulated by the Kyoto Protocol to total greenhouse emissions. The empirical application is for Spain, and the economic and environmental data are for the year 2000. Our results show that there are significant differences in the effects of different sectors on the composition of greenhouse emissions. Therefore, the final impact on the relative contribution of pollutants will basically depend on the activity that receives the exogenous shock in final demand, because there are considerable differences in the way, and the extent to which, individual activities affect the relative composition of greenhouse gas emissions. Keywords: Greenhouse emissions, composition of emissions, sectorial demand, exogenous shock.