COMPARATIVE-STUDY OF KALMAN FILTERING, SYNCHRONOUS EXCITATION AND NUMERICAL DERIVATIVE TECHNIQUES IN FLUOROMETRY

The performance of Kalman filtering, synchronous excitation and numerical derivative techniques for the resolution of overlapping emission spectra in spectrofluorimetry was studied. The extent of spectrum overlap was quantitatively described by the separation degree D(s), defined as the ratio of the peak separation to the full width at half-maximum of the emission spectrum of the interferent. For the system of Rhodamine B and Rhodamine 6G with a large D(s) of about 0.4, both Kalman filtering and synchronous techniques are able to resolve the overlapping spectra well and to give satisfactory results while the derivative spectra are still overlapped with each other. Moreover, the sensitivities are greatly decreased in derivative techniques. For more closely spaced spectra emitted by the complexes of Al and Zn with 7-iodo-8-hydroxyquinoline-5-sulphonic acid (Ferron)-hexadecyltrimethylammonium bromide, the synchronous excitation technique cannot completely separate the overlapping peaks, although it increases the separation degree from 0.25 in the conventional spectra to 0.37 in the synchronous spectra. On the other hand, Kalman filtering is capable of resolving this system. When the Al/Zn intensity ratio at the central wavelength of Al was > 1, however, the accuracy and precision of the estimates for Zn concentration produced by the Kalman filter became worse. In this event, the combination of synchronous excitation and Kalman filtering can much improve the analytical results.

ON THE SIGNIFICANCE OF WAVELENGTH POSITIONING ACCURACY IN MULTICOMPONENT ANALYSIS TECHNIQUES FOR THE CORRECTION OF LINE INTERFERENCES IN INDUCTIVELY COUPLED PLASMA ATOMIC EMISSION-SPECTROMETRY

The present paper reports some definite evidence for the significance of wavelength positioning accuracy in multicomponent analysis techniques for the correction of line interferences in inductively coupled plasma atomic emission spectrometry (ICP-AES). Using scanning spectrometers commercially available today, a large relative error, DELTA(A) may occur in the estimated analyte concentration, owing to wavelength positioning errors, unless a procedure for data processing can eliminate the problem of optical instability. The emphasis is on the effect of the positioning error (deltalambda) in a model scan, which is evaluated theoretically and determined experimentally. A quantitative relation between DELTA(A) and deltalambda, the peak distance, and the effective widths of the analysis and interfering lines is established under the assumption of Gaussian line profiles. The agreement between calculated and experimental DELTA(A) is also illustrated. The DELTA(A) originating from deltalambda is independent of the net analyte/interferent signal ratio; this contrasts with the situation for the positioning error (dlambda) in a sample scan, where DELTA(A) decreases with an increase in the ratio. Compared with dlambda, the effect of deltalambda is generally less significant.

WAVELENGTH POSITIONING ERRORS AND TRUE DETECTION LIMIT IN RELATION TO MULTICOMPONENT ANALYSIS TECHNIQUES FOR THE CORRECTION OF LINE INTERFERENCES IN INDUCTIVELY COUPLED PLASMA ATOMIC EMISSION-SPECTROMETRY

The present paper deals with the evaluation of the relative error (DELTA(A)) in estimated analyte concentrations originating from the wavelength positioning error in a sample scan when multicomponent analysis (MCA) techniques are used for correcting line interferences in inductively coupled plasma atomic emission spectrometry. In the theoretical part, a quantitative relation of DELTA(A) with the extent of line overlap, bandwidth and the magnitude of the positioning error is developed under the assumption of Gaussian line profiles. The measurements of eleven samples covering various typical line interferences showed that the calculated DELTA(A) generally agrees well with the experimental one. An expression of the true detection limit associated with MCA techniques was thus formulated. With MCA techniques, the determination of the analyte and interferent concentrations depend on each other while with conventional correction techniques, such as the three-point method, the estimate of interfering signals is independent of the analyte signals. Therefore. a given positioning error results in a larger DELTA(A) and hence a higher true detection limit in the case of MCA techniques than that in the case of conventional correction methods. although the latter could be a reasonable approximation of the former when the peak distance expressed in the effective width of the interfering line is larger than 0.4. In the light of the effect of wavelength positioning errors, MCA techniques have no advantages over conventional correction methods unless the former can bring an essential reduction ot the positioning error.

IMPROVEMENT OF SELECTIVITY WITH NUMERICAL DERIVATIVE TECHNIQUES IN INDUCTIVELY COUPLED PLASMA ATOMIC EMISSION-SPECTROMETRY

One of the most attractive features of derivative spectrometry is its higher resolving power. In the present power, numerical derivative techniques are evaluated from the viewpoint of increase in selectivity, the latter being expressed in terms of the interferent equivalent concentration (IEC). Typical spectral interferences are covered, including flat background, sloped background, simple curved background and various types of line overlap with different overlapping degrees, which were defined as the ratio of the net interfering signal at the analysis wavelength to the peak signal of the interfering line. the IECs in the derivative spectra are decreased by one to two order of magnitudes compared to those in the original spectra, and in the most cases, assume values below the conventional detection limits. The overlapping degree is the dominant factor that determines whether an analysis line can be resolved from an interfering line with the derivative techniques. Generally, the second derivative technique is effective only for line overlap with an overlapping degree of less than 0.8. The effects of other factors such as line shape, data smoothing, step size and the intensity ratio of analyte to interferent on the performance of the derivative techniques are also discussed. All results are illustrated with practical examples.

基于GIS的黄河三角洲地面沉降研究及相关分析

黄河三角洲存在着不可忽视的地面沉降现象，并在一定程度上阻碍着三角洲的快速发展。对黄河三角洲地面沉降的研究在黄河三角洲防灾减灾、土地利用、河口河道治理等方面具有理论与实践指导意义。 本文收集了黄河三角洲地区1956年、1967年、1980年和1995年四个时期的1：5万地形图，提取高程信息，应用地理信息系统（GIS）软件生成数字高程模型并展开了相应的空间分析，得到各个时间段内黄河三角洲的地面沉降速率图，通过对各沉降速率图的统计分析得出了三角洲地区地面沉降的时空变化规律。文章继而分析了引发黄河三角洲地面沉降的三个主要诱导因子、它们在影响范围、作用时间、作用强度等方面的特点，以及在不同时间段内各诱导因子在引发地面沉降方面所发挥作用的主次。随后，在列举地面沉降对黄河三角洲产生的影响之后，归纳总结了防治地面沉降及其引发灾害的对策。最后，基于采用常规水准测量方法进行地面沉降监测费时费力，提出利用InSAR技术对黄河三角洲地面沉降进行监测的设想，并简要分析了其可行性。

基于GIS探讨人类活动和坡度对藏羚生境的影响

以3S技术为手段，研究了藏羚在青海最主要分布区曲麻莱、治多和可可西里境内藏羚生境状况及其坡度、道路、和居民点对藏羚生境的影响。通过野外考察基本掌握了藏羚的生境的基本特征，取得了考察路线附近区域内藏羚分布的GPS数据及其具有对应的数量、地形地貌、生境类型、人类活动状况等属性数据的藏羚分布点图层。对研究地区LANDSAT TM / ETM+ 5（红）、4（绿）、3（蓝）波段组合影像进行非监督分类，共分出水体和裸岩、沼泽地、沙地、砾石地、低草地、中草地和高草地7种生境类型，将藏羚生境适宜等级划分为不适宜、较差、适宜和非常适宜，其中适宜等级和非常适宜等级的生境类型为藏羚适宜的生境。 首先，将藏羚分布点图层分别和遥感影像假彩色合成图像、坡度图层、道路图层、居民点图层进行叠加分析、距离查询等分析了遥感影像非监督分类的判图依据，设立了坡度、道路、居民点对藏羚生境影响强度的评价原则。然后，通过对研究地区遥感影像进行非监督分类分析研究了藏羚不同适宜程度的生境面积。通过坡度分析和地图查询分析研究了坡度对藏羚生境的影响。通过缓冲区分析研究了道路和居民点对藏羚生境的影响。最后将坡度、道路和居民点三个因素结合起来通过地图综合查询分析研究了这三个因素对藏羚生境的综合影响，并给出了研究地区藏羚不同适宜等级的生境面积。 主要的研究结果和结论如下： 1、从不同类型生境在研究地区中所占比例的趋势上看，治多地区和曲麻莱地区的植被要明显优于可可西里地区，这与整个研究地区从西北到东南地势逐渐降低、水热条件逐渐变好的趋势相一致，至少可以说，从食物条件来看，治多地区和曲麻莱地区比可可西里地区更适于藏羚的栖息。 在曲麻莱地区藏羚的潜在生境面积共26861 km2，占该地区总面积的69%；在治多地区藏羚的潜在生境面积共21617 km2，占该地区总面积的68%；在可可西里地区藏羚的潜在生境面积共26398 km2，占该地区总面积的54%。 2、根据藏羚分布点图层与坡度分析图层的地图查询分析，把藏羚的生境按坡度分为2类，坡度小于等于30度时为适宜生境，坡度大于30度时为不适宜生境。将研究地区坡度栅格图像（grid文件）和非监督分类结果栅格图像（grid文件）进行地图查询分析，结果表明，在整个研究地区坡度大于30度的生境面积所占的比例不到总面积的3%，坡度影响下研究地区藏羚适宜栖息的生境面积变化不大。考虑到坡度的影响，曲麻莱、治多和可可西里适合藏羚栖息的面积分别为26663 km2（68%）、21187 km2（66%）和26350 km2（54%）。 3、根据最近原则连接藏羚分布点图层与道路图层空间数据，通过Distance综合查询分析，把道路对藏羚的影响程度划分为4个等级：距离道路0－1000m，强烈影响；距离道路1000－2000m，中度影响；距离道路2000－3000m，轻度影响；距离道3000m以外，无影响。然后在ArcView GIS 3.2a软件环境的支持下对研究地区的道路图层分别做距离道路为1000m、2000m和3000m的缓冲区分析研究，则曲麻莱、治多和可可西里地区藏羚生境受道路累计影响的面积及其分别占各研究地区总面积的比例分别为20215 km2（51.80%）、19480 km2（61%）和4437 km2（9 %）。考虑道路对藏羚生境的影响，在治多和曲麻莱地区，由于道路的影响将使得藏羚生境大面积丧失，生境高度破碎化。 4、根据最近原则连接藏羚分布点图层与居民点图层空间数据，通过Distance综合查询分析，把居民点对藏羚的影响程度划分为4个等级：距离居民点0－3000m，强烈影响；距离居民点3000－6000m，中度影响；距离居民点6000－9000m，轻度影响；距离居民点9000m以外，无影响。然后在ArcView GIS 3.2a软件环境的支持下对研究地区的居民点图层分别做距离居民点距离为3000m、6000m和9000m的缓冲区分析。曲麻莱、治多和可可西里地区藏羚生境受居民点影响的面积及其分别占总面积的比例分别为11282 km2（29%）、15258 km2（48%）和3846 km2（8%）。从居民点对藏羚生境的影响看，由于居民点的影响使得治多和曲麻莱地区，尤其是治多地区，藏羚生境大面积丧失，生境高度破碎化。 5、人类活动（主要是道路和居民点）对藏羚生境适宜生境面积的影响是研究中主要的内容，鉴于道路和居民点对藏羚生境影响的评价原则分类方法一致，我们把道路和居民点对藏羚的影响程度合并为4个等级（距离道路0－1000m内或距离居民点0－3000m内，强烈影响；距离道路1000－2000m内或距离居民点3000－6000m内，中度影响；距离道路2000－3000m内或距离居民点6000－9000m内，轻度影响；距离道路3000m以外或距离居民点9000m以外，无影响，对道路和居民点相应距离的缓冲区分析图层进行合并等操作，测定曲麻莱、治多和可可西里地区藏羚生境受人类活动影响的面积及其占总面积的比例分别为21595 km2（55%）、22271 km2（70%）和4775 km2（10%）。 在治多和曲麻莱地区，由于人类活动的影响使得藏羚生境大面积丧失，生境高度破碎化，尤其是治多地区，影响面积达将近70%。在可可西里地区，10%的影响面积虽然不是太大，但是近几年来由于各种形式的旅游日趋升温，尤其是青藏铁路建设开通，将增加道路对藏羚生境的影响程度。人类活动影响在研究地区分布极不平均，在曲麻莱的中东部、治多的东部以及可可西里的109国道附近人类活动影响的强度较大，在这些地区藏羚的生存条件恶劣，甚至部分地区已经不适合藏羚栖息了。 6、最后，基于研究地区的坡度grid图层、非监督分类grid图层以及不同程度人类活动影响的grid图层，对不同坡度、道路和居民影响的生境面积进行综合查询分析。把人类活动对藏羚生境的影响强度重新划分为如下3个等级，A、短距离影响，距离道路1000m或距离居民点3000m范围内的影响，也就是人类活动的强烈影响；B、中距离影响，距离道路2000m或距离居民点6000m范围内的影响，也就是人类活动的强烈影响和中度影响之和；C、长距离影响，距离道路3000m或距离居民点9000m范围内的影响，也就是人类活动的强烈影响、中度影响和轻度影响的总和。曲麻莱、治多和可可西里研究地区中坡度小于等于30度并且人类活动长距离范围影响下藏羚适合栖息的生境面积及占相应研究地区总面积的比例为12597 km2（32%）、6117km2（19%）和23564km2（48%）。 在研究地区，治多地区人类活动对藏羚生境适宜性的影响最为严重，其次为曲麻莱地区，而可可西里地区的人类活动影响较小。尤其是治多地区和曲麻莱地区，当人类活动的影响最大距离时，治多地区藏羚适宜生境面积竟然不到总面积的1/5，曲麻莱地区不到1/3。这两地区人类活动主要集中在东部，导致治多东部地区和曲麻莱中东部地区几乎没有藏羚分布。于是，由于人类活动的影响，使得拥有良好生境条件的治多和曲麻莱地区适合藏羚栖息的生境却较少，而生境条件相对较差的可可西里地区反而拥有相对较多的适合藏羚栖息的生境。

GIS环境下的最佳路径规划

:本文从沈阳市消防通信指挥系统的实际需要出发 ,在 GIS环境下求解从消防中队到火灾发生地的最佳路径 .采用了离线搜索、建立最佳路径库来解决实际应用中对实时性的要求 ,叙述了如何建立最佳路径的数学模型和利用遗传算法通过样本路径来求解模型中的参数 .

消防指挥系统中GIS环境下的最佳路径问题

基于GPS、GSM以及GIS技术的城市交通动态监控系统的设计及关键技术研究

随着城市交通日益繁忙，如何开发出一套定位精度高、价格低廉的车辆导航与定位系统，成为目前工TS（智能交通系统）中一个重要的研究部分。本文将GPS（全球定位系统）、GSM（全球移动通信系统）以及GIS（地理信息系统佩技术结合起来，开发出一套适合社会需求的车辆导航与定位系统，并对系统的设计、建立、系统功能、实现过程以及实验结果做了详尽的说明，提出了系统需要进一步改进的地方。系统总体工作的总体思路是使用安装在车辆上的GPS车载终端接收GPS卫星的定位信息、以GSM网络的短消息业务方式传回监控中心，在监控中心，GSM控制器将接收到的信息通过标准串口发送给监控计算机，监控计算机对信息、进行伪距一位置集中差分处理以及卡尔曼滤波，使定位精度由原来的100米左右提高到10米左右，然后使用集成地图的方法将其显示在地图上，以便作出合理的决策。

胜利勘探数据中心及勘探辅助决策系统研究

In the paper through extensive study and design, the technical plan for establishing the exploration database center is made to combine imported and self developed techniques. By research and repeated experiment a modern database center has been set up with its hardware and network having advanced performance, its system well configured, its data store and management complete, and its data support being fast and direct. Through study on the theory, method and model of decision an exploration decision assistant schema is designed with one decision plan of well location decision support system being evaluated and put into action. 1. Study on the establishment of Shengli exploration database center Research is made on the hardware configuration of the database center including its workstations and all connected hardware and system. The hardware of the database center is formed by connecting workstations, microcomputer workstations, disk arrays, and those equipments used for seismic processing and interpretation. Research on the data store and management includes the analysis of the contents to be managed, data flow, data standard, data QC, data backup and restore policy, optimization of database system. A reasonable data management regulation and workflow is made and the scientific exploration data management system is created. Data load is done by working out a schedule firstly and at last 200 more projects of seismic surveys has been loaded amount to 25TB. 2. Exploration work support system and its application Seismic data processing system support has the following features, automatic extraction of seismic attributes, GIS navigation, data order, extraction of any sized data cube, pseudo huge capacity disk array, standard output exchange format etc. The prestack data can be accessed by the processing system or data can be transferred to other processing system through standard exchange format. For supporting seismic interpretation system the following features exist such as auto scan and store of interpretation result, internal data quality control etc. the interpretation system is connected directly with database center to get real time support of seismic data, formation data and well data. Comprehensive geological study support is done through intranet with the ability to query or display data graphically on the navigation system under some geological constraints. Production management support system is mainly used to collect, analyze and display production data with its core technology on the controlled data collection and creation of multiple standard forms. 3. exploration decision support system design By classification of workflow and data flow of all the exploration stages and study on decision theory and method, target of each decision step, decision model and requirement, three concept models has been formed for the Shengli exploration decision support system including the exploration distribution support system, the well location support system and production management support system. the well location decision support system has passed evaluation and been put into action. 4. Technical advance Hardware and software match with high performance for the database center. By combining parallel computer system, database server, huge capacity ATL, disk array, network and firewall together to create the first exploration database center in China with reasonable configuration, high performance and able to manage the whole data sets of exploration. Huge exploration data management technology is formed where exploration data standards and management regulations are made to guarantee data quality, safety and security. Multifunction query and support system for comprehensive exploration information support. It includes support system for geological study, seismic processing and interpretation and production management. In the system a lot of new database and computer technology have been used to provide real time information support for exploration work. Finally is the design of Shengli exploration decision support system. 5. Application and benefit Data storage has reached the amount of 25TB with thousand of users in Shengli oil field to access data to improve work efficiency multiple times. The technology has also been applied by many other units of SINOPEC. Its application of providing data to a project named Exploration achievements and Evaluation of Favorable Targets in Hekou Area shortened the data preparation period from 30 days to 2 days, enriching data abundance 15 percent and getting information support from the database center perfectly. Its application to provide former processed result for a project named Pre-stack depth migration in Guxi fracture zone reduced the amount of repeated process and shortened work period of one month and improved processing precision and quality, saving capital investment of data processing of 30 million yuan. It application by providing project database automatically in project named Geological and seismic study of southern slope zone of Dongying Sag shortened data preparation time so that researchers have more time to do research, thus to improve interpretation precision and quality.

基于GIS的滑坡危险度区划定量研究

Abstract With the Development of the West Regions, the contradiction between economy and geological hazards was once again brought to our face in the Loess Plateau where was ,and is liable to geological hazards for the unique conditions of geology, hydrogeology, geography and meteorology. The goal to realize harmonious development between human and the earth was always there, and landslide hazard zoning provided us an effective way against geological hazards and damage. In the background of the construction of 750KV transformer substation in TianShui, we summarized some theories, methods and development of landslide hazard zoning and discussed the application of information value model in landslide hazard zoning. A called “judgement matrix” like in AHP was introduced to the information value model to solve the key point of landslide hazard zoning — choice of factors and weight of each factor. GIS was applied in the landslide hazard zoning, with its comprehensive function on data management, spatial analysis and mapping. A zonation map of landslide hazard was worked out on MAPGIS aimed to have something of reference and instruction on the construction of the transformer substation. Key words: landslide; hazard zoning; information value model; GIS; judgement matrix

面向决策支持的综合地质信息系统功能开发和GIS应用

Synthetic Geology Information System(SGIS) is a part of the theory of Engineering Geomechanics-mate-Synthetics(EGMS), is also a development of its technical methodology. SGIS includes ways of geology engineering investigation, design, and construction. Although SGIS has an integrate theory frame, and some parts of it have gained great progress, the completion of SGIS is a continuous and accumulative process. This paper analyses the ways and principle of building knowledge database and model database, summarizes the experts' experience on exploration methods selection and the characters of exploration models, combining with the application of Decision Support System(DSS) in Decision support of Synthetic Exploration Methods for Railway engineering Geology. By the analysis of hierarchy structure of the model database, the effects of geology engineering factors on the selection of exploration methods are expressed. By the usage of fuzzy patterns recognize, hierarchy structure analysis, fuzzy collection closement analysis etc, the software of DSS for engineering design and construction are developed. At same time, by the development of Monitoring Data Analysis System and experiment data management system of Hydro-power project, this paper discussed the data management of science experiment of Hydro-power project by the usage of synthetic database and the usage of Geography Information System(GIS) and DSS technics. The technic of visual operation of data process and project monitoring system are presented. The intelligence algorithm of self-adoption is carried out to improve the data process and analysis of monitoring. Items of the project theoretical analysis and data process are designed in detail. All the theory and technical methods presented in this paper are one part of SGIS, in which the application of DSS and GIS, is an important step of the progress and completion of SGIS.

工程地质三维建模与可视化技术应用开发

Synthetic Geology Information System (SGIS) is an important constituent part of the theory of Engineering Geomechanics Mate-Synthetic (EGMS), and is the information system more suited for the collection, storage, management, analysis and processing to the information coming from engineering geology,' geological engineering and geotechnical engineering. Its contents involve various works and methods of the investigation, design, and construction in different stages of the geological engineering. Engineering geological and three-dimensional modeling and visualization is the fundamental part of the SGIS, and is a theory, method and technique by which, adopting the computer graphics and image processing techniques, the data derived from engineering geological survey and the calculated results obtained from the geomechanical numerical simulation and analysis are converted to the graphics and images displayed on the computer screen and can be processed interactively. In this paper, the significance and realizing approaches of the three-dimensional modeling and visualization for the complex geological mass in the engineering geology are discussed and the methods of taking advantage of the interpolation and fitting for the scattered and field-surveyed data to simulate the geological layers, such as the topography and earth surface, the groundwater table and the stratum boundary, are researched into. At the mean time, in mind the characteristics of the structure of the basic data for three-dimensional modeling, its visual management can be resolved into the engineering surveyed database management module, plot parameter management module and data output module and the requirement for basic data management can be fulfilled. In the paper, the establishment and development of the three-dimensional geological information system are probed tentatively, and an instance of three-dimensional visual Engineering Distribution Information System (EDIS), theConstruction Management Information System for an airport, in which the functions, such as the real-time browse among the three-dimensional virtual-reality landscapes of the airport construction from start to finish, the information query to the airport facility and the building in the housing district and the recording and playback of the animation sets for the browse and the takeoff and landing of the planes, is developed by applying the component-mode three-dimensional virtual-reality geological information system (GIS) software development kits (SDK), so the three-dimensional visual management platform is provided for the airport construction. Moreover, in the gaper, integrated with the three-dimensional topography visualization and its application in the Sichuan-Tibet Highways, the method of the digital elevation model (DEM) data collection from the topographic maps is described, and the three-dimensional visualization and the roaming about the terrain along the highway are achieved through computer language programming. Understanding to the important role played by the varied and unique topographical condition in the gestation and germination of the highly-dense, frequently-arising and severely-endangered geological hazards can be deepened.

人口统计信息空间可视化系统研究

Population research is a front area concerned by domestic and overseas, especially its researches on its spatial visualization and its geo-visualization system design, which provides a sound base for understanding and analysis of the regional difference in population distribution and its spatial rules. With the development of GIS, the theory of geo-visualization more and more plays an important role in many research fields, especially in population information visualization, and has been made the big achievements recently. Nevertheless, the current research is less attention paid to the system design for statistical-geo visualization for population information. This paper tries to explore the design theories and methodologies for statistical-geo-visualization system for population information. The researches are mainly focused on the framework, the methodologies and techniques for the system design and construction. The purpose of the research is developed a platform for population atlas by the integration of the former owned copy software of the research group in statistical mapping system. As a modern tool, the system will provide a spatial visual environment for user to analyze the characteristics of population distribution and differentiate the interrelations of the population components. Firstly, the paper discusses the essentiality of geo-visualization for population information and brings forward the key issue in statistical-geo visualization system design based on the analysis of inland and international trends. Secondly, the geo-visualization system for population design, including its structure, functionality, module, user interface design, is studied based on the concepts of theory and technology of geo-visualization. The system design is proposed and further divided into three parts: support layer, technical layer, user layer. The support layer is a basic operation module and main part of the system. The technical layer is a core part of the system, supported by database and function modules. The database module mainly include the integrated population database (comprises spatial data, attribute data and geographical features information), the cartographic symbol library, the color library, the statistical analysis model. The function module of the system consists of thematic map maker component, statistical graph maker component, database management component and statistical analysis component. The user layer is an integrated platform, which provides the functions to design and implement a visual interface for user to query, analysis and management the statistic data and the electronic map. Based on the above, China's E-atlas for population was designed and developed by the integration of the national fifth census data with 1:400 million scaled spatial data. The atlas illustrates the actual development level of the population nowadays in China by about 200 thematic maps relating with 10 map categories(environment, population distribution, sex and age, immigration, nation, family and marriage, birth, education, employment, house). As a scientific reference tool, China's E-atlas for population has already received the high evaluation after published in early 2005. Finally, the paper makes the deep analysis of the sex ratio in China, to show how to use the functions of the system to analyze the specific population problem and how to make the data mining. The analysis results showed that: 1. The sex ratio has been increased in many regions after fourth census in 1990 except the cities in the east region, and the high sex ratio is highly located in hilly and low mountain areas where with the high illiteracy rate and the high poor rate; 2. The statistical-geo visualization system is a powerful tool to handle population information, which can be used to reflect the regional differences and the regional variations of population in China and indicate the interrelations of the population with other environment factors. Although the author tries to bring up a integrate design frame of the statistical-geo visualization system, there are still many problems needed to be resolved with the development of geo-visualization studies.