An acid method for the volumetric estimation of water-soluble dithiocarbamates

Dithiocarbamates have been estimated previously by reaction with a strong acid, the carbon disulfide evolved being converted into a xanthate and the latter estimated iodimetrically. In the present method, a water-soluble dithiocarbamate is reacted with a decinormal mineral acid and the excess acid is determined to compute the amount of dithiocarbamate present. This method is applicable for the determination of a dithiocarbamate in a mixture containing thiuram disulfide.

Method for obtaining minimum noise in a general purpose hot wire amplifier

It has been shown that the conventional practice of designing a compensated hot wire amplifier with a fixed ceiling to floor ratio results in considerable and unnecessary increase in noise level at compensation settings other than optimum (which is at the maximum compensation at the highest frequency of interest). The optimum ceiling to floor ratio has been estimated to be between 1.5-2.0 ωmaxM. Application of the above considerations to an amplifier in which the ceiling to floor ratio is optimized at each compensation setting (for a given amplifier band-width), shows the usefulness of the method in improving the signal to noise ratio.

A method for the determination of dixanthogens

One mole of diethyl dixanthogen reacts with 26 moles of chloramine-T, and this reaction can be used for the determination of the dixanthogen. Higher alkyl dixanthogens react in a more complicated fashion, but may still be estimated using an empirical correction.

A weighted mean square method of linearization in non-linear oscillations

The paper deals with a linearization technique in non-linear oscillations for systems which are governed by second-order non-linear ordinary differential equations. The method is based on approximation of the non-linear function by a linear function such that the error is least in the weighted mean square sense. The method has been applied to cubic, sine, hyperbolic sine, and odd polynomial types of non-linearities and the results obtained are more accurate than those given by existing linearization methods.

New Method for Delexicalization and its Application to Prosodic Tagging for Text-to-Speech Synthesis

This paper describes a new flexible delexicalization method based on glottal excited parametric speech synthesis scheme. The system utilizes inverse filtered glottal flow and all-pole modelling of the vocal tract. The method provides a possibil- ity to retain and manipulate all relevant prosodic features of any kind of speech. Most importantly, the features include voice quality, which has not been properly modeled in earlier delex- icalization methods. The functionality of the new method was tested in a prosodic tagging experiment aimed at providing word prominence data for a text-to-speech synthesis system. The ex- periment confirmed the usefulness of the method and further corroborated earlier evidence that linguistic factors influence the perception of prosodic prominence.

Every method counts

In this study we explore the concurrent, combined use of three research methods, statistical corpus analysis and two psycholinguistic experiments (a forced-choice and an acceptability rating task), using verbal synonymy in Finnish as a case in point. In addition to supporting conclusions from earlier studies concerning the relationships between corpus-based and ex- perimental data (e. g., Featherston 2005), we show that each method adds to our understanding of the studied phenomenon, in a way which could not be achieved through any single method by itself. Most importantly, whereas relative rareness in a corpus is associated with dispreference in selection, such infrequency does not categorically always entail substantially lower acceptability. Furthermore, we show that forced-choice and acceptability rating tasks pertain to distinct linguistic processes, with category-wise in- commensurable scales of measurement, and should therefore be merged with caution, if at all.

Transient MHD stagnation flow of a non-Newtonian fluid due to impulsive motion from rest

The transient boundary layer flow and heat transfer of a viscous incompressible electrically conducting non-Newtonian power-law fluid in a stagnation region of a two-dimensional body in the presence of an applied magnetic field have been studied when the motion is induced impulsively from rest. The nonlinear partial differential equations governing the flow and heat transfer have been solved by the homotopy analysis method and by an implicit finite-difference scheme. For some cases, analytical or approximate solutions have also been obtained. The special interest are the effects of the power-law index, magnetic parameter and the generalized Prandtl number on the surface shear stress and heat transfer rate. In all cases, there is a smooth transition from the transient state to steady state. The shear stress and heat transfer rate at the surface are found to be significantly influenced by the power-law index N except for large time and they show opposite behaviour for steady and unsteady flows. The magnetic field strongly affects the surface shear stress, but its effect on the surface heat transfer rate is comparatively weak except for large time. On the other hand, the generalized Prandtl number exerts strong influence on the surface heat transfer. The skin friction coefficient and the Nusselt number decrease rapidly in a small interval 0 < t* < 1 and reach the steady-state values for t* >= 4. (C) 2010 Published by Elsevier Ltd.

A Computationally Efficient Generalized Poisson Solution for Independent Double-Gate Transistors

Previous techniques used for solving the 1-D Poisson equation ( PE) rigorously for long-channel asymmetric and independent double-gate (IDG) transistors result in potential models that involve multiple intercoupled implicit equations. As these equations need to be solved self-consistently, such potential models are clearly inefficient for compact modeling. This paper reports a different rigorous technique for solving the same PE by which one can obtain the potential profile of a generalized IDG transistor that involves a single implicit equation. The proposed Poisson solution is shown to be computationally more efficient for circuit simulation than the previous solutions.

A model Integrating the Facilities Management Process with the Building End User’s Business Process (ProFacil)

The ProFacil model is a generic process model defined as a framework model showing the links between the facilities management process and the building end user’s business process. The purpose of using the model is to support more detailed process modelling. The model has been developed using the IDEF0 modelling method. The ProFacil model describes business activities from the generalized point of view as management-, support-, and core processes and their relations. The model defines basic activities in the provision of a facility. Examples of these activities are “operate facilities”, “provide new facilities”, “provide re-build facilities”, “provide maintained facilities” and “perform dispose of facilities”. These are all generic activities providing a basis for a further specialisation of company specific FM activities and their tasks. A facilitator can establish a specialized process model using the ProFacil model and interacting with company experts to describe their company’s specific processes. These modelling seminars or interviews will be done in an informal way, supported by the high-level process model as a common reference.

A Method for Comparing Scholarly Journals as Service Providers to Authors

When authors of scholarly articles decide where to submit their manuscripts for peer review and eventual publication, they often base their choice of journals on very incomplete information abouthow well the journals serve the authors’ purposes of informing about their research and advancing their academic careers. The purpose of this study was to develop and test a new method for benchmarking scientific journals, providing more information to prospective authors. The method estimates a number of journal parameters, including readership, scientific prestige, time from submission to publication, acceptance rate and service provided by the journal during the review and publication process. Data directly obtainable from the web, data that can be calculated from such data, data obtained from publishers and editors, and data obtained using surveys with authors are used in the method, which has been tested on three different sets of journals, each from a different discipline. We found a number of problems with the different data acquisition methods, which limit the extent to which the method can be used. Publishers and editors are reluctant to disclose important information they have at hand (i.e. journal circulation, web downloads, acceptance rate). The calculation of some important parameters (for instance average time from submission to publication, regional spread of authorship) can be done but requires quite a lot of work. It can be difficult to get reasonable response rates to surveys with authors. All in all we believe that the method we propose, taking a “service to authors” perspective as a basis for benchmarking scientific journals, is useful and can provide information that is valuable to prospective authors in selected scientific disciplines.