Modulation of the perception of temporal order by attentional and pre-attentional factors

When two stimuli are presented simultaneously to an observer, the perceived temporal order does not always correspond to the actual one. In three experiments we examined how the location and spatial predictability of visual stimuli modulate the perception of temporal order. Thirty-two participants had to report the temporal order of appearance of two visual stimuli. In Experiment 1, both stimuli were presented at the same eccentricity and no perceptual asynchrony between them was found. In Experiment 2, one stimulus was presented close to the fixation point and the other, peripheral, stimulus was presented in separate blocks in two eccentricities (4.8º and 9.6º). We found that the peripheral stimulus was perceived to be delayed in relation to the central one, with no significant difference between the delays obtained in the two eccentricities. In Experiment 3, using three eccentricities (2.5º, 7.3º and 12.1º) for the presentation of the peripheral stimulus, we compared a condition in which its location was highly predictable with two other conditions in which its location was progressively less predictable. Here, the perception of the peripheral stimulus was also delayed in relation to the central one, with this delay depending on both the eccentricity and predictability of the stimulus. We argue that attentional deployment, manipulated by the spatial predictability of the stimulus, seems to play an important role in the temporal order perception of visual stimuli. Yet, under whichever condition of spatial predictability, basic sensory and attentional processes are unavoidably entangled and both factors must concur to the perception of temporal order.

Measuring higher order optical aberrations of the human eye: techniques and applications

In the present paper we discuss the development of "wave-front", an instrument for determining the lower and higher optical aberrations of the human eye. We also discuss the advantages that such instrumentation and techniques might bring to the ophthalmology professional of the 21st century. By shining a small light spot on the retina of subjects and observing the light that is reflected back from within the eye, we are able to quantitatively determine the amount of lower order aberrations (astigmatism, myopia, hyperopia) and higher order aberrations (coma, spherical aberration, etc.). We have measured artificial eyes with calibrated ametropia ranging from +5 to -5 D, with and without 2 D astigmatism with axis at 45º and 90º. We used a device known as the Hartmann-Shack (HS) sensor, originally developed for measuring the optical aberrations of optical instruments and general refracting surfaces in astronomical telescopes. The HS sensor sends information to a computer software for decomposition of wave-front aberrations into a set of Zernike polynomials. These polynomials have special mathematical properties and are more suitable in this case than the traditional Seidel polynomials. We have demonstrated that this technique is more precise than conventional autorefraction, with a root mean square error (RMSE) of less than 0.1 µm for a 4-mm diameter pupil. In terms of dioptric power this represents an RMSE error of less than 0.04 D and 5º for the axis. This precision is sufficient for customized corneal ablations, among other applications.

Large-eddy simulation of wind flows over complex terrains for wind energy applications

Wind energy has obtained outstanding expectations due to risks of global warming and nuclear energy production plant accidents. Nowadays, wind farms are often constructed in areas of complex terrain. A potential wind farm location must have the site thoroughly surveyed and the wind climatology analyzed before installing any hardware. Therefore, modeling of Atmospheric Boundary Layer (ABL) flows over complex terrains containing, e.g. hills, forest, and lakes is of great interest in wind energy applications, as it can help in locating and optimizing the wind farms. Numerical modeling of wind flows using Computational Fluid Dynamics (CFD) has become a popular technique during the last few decades. Due to the inherent flow variability and large-scale unsteadiness typical in ABL flows in general and especially over complex terrains, the flow can be difficult to be predicted accurately enough by using the Reynolds-Averaged Navier-Stokes equations (RANS). Large- Eddy Simulation (LES) resolves the largest and thus most important turbulent eddies and models only the small-scale motions which are more universal than the large eddies and thus easier to model. Therefore, LES is expected to be more suitable for this kind of simulations although it is computationally more expensive than the RANS approach. With the fast development of computers and open-source CFD software during the recent years, the application of LES toward atmospheric flow is becoming increasingly common nowadays. The aim of the work is to simulate atmospheric flows over realistic and complex terrains by means of LES. Evaluation of potential in-land wind park locations will be the main application for these simulations. Development of the LES methodology to simulate the atmospheric flows over realistic terrains is reported in the thesis. The work also aims at validating the LES methodology at a real scale. In the thesis, LES are carried out for flow problems ranging from basic channel flows to real atmospheric flows over one of the most recent real-life complex terrain problems, the Bolund hill. All the simulations reported in the thesis are carried out using a new OpenFOAM® -based LES solver. The solver uses the 4th order time-accurate Runge-Kutta scheme and a fractional step method. Moreover, development of the LES methodology includes special attention to two boundary conditions: the upstream (inflow) and wall boundary conditions. The upstream boundary condition is generated by using the so-called recycling technique, in which the instantaneous flow properties are sampled on aplane downstream of the inlet and mapped back to the inlet at each time step. This technique develops the upstream boundary-layer flow together with the inflow turbulence without using any precursor simulation and thus within a single computational domain. The roughness of the terrain surface is modeled by implementing a new wall function into OpenFOAM® during the thesis work. Both, the recycling method and the newly implemented wall function, are validated for the channel flows at relatively high Reynolds number before applying them to the atmospheric flow applications. After validating the LES model over simple flows, the simulations are carried out for atmospheric boundary-layer flows over two types of hills: first, two-dimensional wind-tunnel hill profiles and second, the Bolund hill located in Roskilde Fjord, Denmark. For the twodimensional wind-tunnel hills, the study focuses on the overall flow behavior as a function of the hill slope. Moreover, the simulations are repeated using another wall function suitable for smooth surfaces, which already existed in OpenFOAM® , in order to study the sensitivity of the flow to the surface roughness in ABL flows. The simulated results obtained using the two wall functions are compared against the wind-tunnel measurements. It is shown that LES using the implemented wall function produces overall satisfactory results on the turbulent flow over the two-dimensional hills. The prediction of the flow separation and reattachment-length for the steeper hill is closer to the measurements than the other numerical studies reported in the past for the same hill geometry. The field measurement campaign performed over the Bolund hill provides the most recent field-experiment dataset for the mean flow and the turbulence properties. A number of research groups have simulated the wind flows over the Bolund hill. Due to the challenging features of the hill such as the almost vertical hill slope, it is considered as an ideal experimental test case for validating micro-scale CFD models for wind energy applications. In this work, the simulated results obtained for two wind directions are compared against the field measurements. It is shown that the present LES can reproduce the complex turbulent wind flow structures over a complicated terrain such as the Bolund hill. Especially, the present LES results show the best prediction of the turbulent kinetic energy with an average error of 24.1%, which is a 43% smaller than any other model results reported in the past for the Bolund case. Finally, the validated LES methodology is demonstrated to simulate the wind flow over the existing Muukko wind farm located in South-Eastern Finland. The simulation is carried out only for one wind direction and the results on the instantaneous and time-averaged wind speeds are briefly reported. The demonstration case is followed by discussions on the practical aspects of LES for the wind resource assessment over a realistic inland wind farm.

Imaging Neuroinflammation in Progressive Multiple Sclerosis

Multiple sclerosis (MS) is a chronic autoimmune disease of the central nervous system CNS), where inflammation and neurodegeneration lead to irreversible neuronal damage. In MS, a dysfunctional immune system causes auto‐reactive lymphocytes to migrate into CNS where they initiate an inflammatory cascade leading to focal demyelination, axonal degeneration and neuronal loss. One of the hallmarks of neuronal injury and neuroinflammation is the activation of microglia. Activated microglia are found not only in the focal inflammatory lesions, but also diffusely in the normal‐appearing white matter (NAWM), especially in progressive MS. The purine base, adenosine is a ubiquitous neuromodulator in the CNS and also participates in the regulation of inflammation. The effect of adenosine mediated via adenosine A2A receptors has been linked to microglial activation, whereas modulating A2A receptors may exert neuroprotective effects. In the majority of patients, MS presents with a relapsing disease course, later advancing to a progressive phase characterised by a worsening, irreversible disability. Disease modifying treatments can reduce the severity and progression in relapsing MS, but no efficient treatment exists for progressive MS. The aim of this research was to investigate the prevalence of adenosine A2A receptors and activated microglia in progressive MS by using in vivo positron emission tomography (PET) imaging and [11C]TMSX and [11C](R)‐PK11195 radioligands. Magnetic resonance imaging (MRI) with diffusion tensor imaging (DTI) was performed to evaluate structural brain damage. Non‐invasive input function methods were also developed for the analyses of [11C]TMSX PET data. Finally, histopathological correlates of [11C](R)‐PK11195 radioligand binding related to chronic MS lesions were investigated in post‐mortem samples of progressive MS brain using autoradiography and immunohistochemistry. [11C]TMSX binding to A2A receptors was increased in NAWM of secondary progressive MS (SPMS) patients when compared to healthy controls, and this correlated to more severe atrophy in MRI and white matter disintegration (reduced fractional anisotropy, FA) in DTI. The non‐invasive input function methods appeared as feasible options for brain [11C]TMSX images obviating arterial blood sampling. [11C](R)‐PK11195 uptake was increased in the NAWM of SPMS patients when compared to patients with relapsing MS and healthy controls. Higher [11C](R)‐PK11195 binding in NAWM and total perilesional area of T1 hypointense lesions was associated with more severe clinical disability, increased brain atrophy, higher lesion load and reduced FA in NAWM in the MS patients. In autoradiography, increased perilesional [11C](R)‐PK11195 uptake was associated with increased microglial activation identified using immunohistochemistry. In conclusion, brain [11C]TMSX PET imaging holds promise in the evaluation of diffuse neuroinflammation in progressive MS. Being a marker of microglial activation, [11C](R)‐ PK11195 PET imaging could possibly be used as a surrogate biomarker in the evaluation of the neuroinflammatory burden and clinical disease severity in progressive MS.

Suomen mahdollisuudet vaikuttaa Euroopan unionin lainsäädäntömenettelyyn

Väitöstutkimuksen kohteena on säädösten valmistelu ja niitä koskevaa päätöksenteko Euroopan unionissa erityisesti siitä näkökulmasta, miten Suomen kaltainen pieni jäsenvaltio voi vaikuttaa EU-säädöksiin. Väitöskirjassa analysoidaan unionin toimielinten välillä vallitsevaa dynamiikkaa ja Suomen asemaa erityisesti EUT-sopimuksen 289 artiklan 1 kohdan ja 294 artiklan mukaisessa tavallisessa lainsäätämisjärjestyksessä. Lissabonin sopimuksen voimaantulon jälkeen tavallinen lainsäätämisjärjestys, joka aiemmin tunnettiin yhteispäätösmenettelynä, on selvästi yleisin lainsäädäntömenettely unionissa. Väitöskirja koostuu kuudesta erillisjulkaistusta pääosin vertaisarvioidusta artikkelista ja niitä täydentävästä ja kokoavasta yhteenveto-osasta. Kirjan tämä painos sisältää vain yhteenvetoluvun, ei erikseen julkaistuja artikkeleita. Väitöskirjassa hyödynnetään eurooppaoikeuden ja politiikan tutkimuksen kirjallisuutta. Metodologisesti väitöstutkimus edustaa empiiristä oikeustutkimusta, jossa yhdistyy lainopillinen analyysi ja empiiristen, tässä tapauksessa lähinnä laadullisten aineistojen analyysi. Yhteenvedossa on seurattu lainsäädäntömuutoksia ja oikeuskäytäntöä 10. huhtikuuta 2015 asti. Väitöskirjatutkimuksen kantavana teemana on oikeuden ja politiikan suhde EUlainsäätämisessä. Artikkeleita ja yhteenvetoa sitovat yhteen kaksi yleisen tason argumenttia. Ensiksi, EU:n lainsäädäntömenettelyä koskevat oikeussäännöt ja institutionalisoituneet käytännöt luovat kehikon toimielinten sisäiselle päätöksenteolle sekä niiden välisille poliittisluonteisille neuvotteluille, vaikkakaan sääntöihin ja käytäntöihin ei yleensä ole tarvetta nimenomaisesti vedota menettelyn kuluessa. Toiseksi, koska Suomen kaltaisen pienen jäsenvaltion muodollinen valta – siis äänimäärä neuvostossa – on hyvin rajallinen, suomalaisten ministerien ja virkamiesten tulisi hyödyntää erilaisia epävirallisia vaikuttamiskanavia, jos halutaan vahvistaa Suomen tosiasiallista vaikutusvaltaa menettelyssä. Unionin lainsäädäntötoiminta ei tyypillisesti ole rationaalisen mallin mukaan etenevää päätöksentekoa, vaan tempoilevaa ja vaikeasti ennakoitavaa kamppailua eri preferenssejä edustavien toimijoiden välillä. Väitöskirjan ensimmäisessä artikkelissa analysoidaan säädösvalmistelua ja lainsäätämismenettelyä unionissa vaihe vaiheelta. Johtopäätöksenä todetaan, että unioniin on syntynyt yhteispäätösmenettelyn, sittemmin tavallisen lainsäätämisjärjestyksen myötä uudenlainen lainsäätämiskulttuuri, jolle on leimallista tiiviit yhteydet komission, Euroopan parlamentin ja neuvoston välillä. Toimielimet ottavat nykyisin joustavasti huomioon toistensa kantoja menettelyn edetessä, mikä mahdollistaa sen, että valtaosa EU-säädöksistä voidaan hyväksyä jo ensimmäisessä käsittelyssä. Toisessa tutkimusartikkelissa analysoidaan komission asemaa unionin toimielinrakenteessa. Artikkelissa tarkastellaan komission aloiteoikeutta sekä komission puheenjohtajan ja sen jäsenten valintamenettelyjä siitä näkökulmasta, edistääkö komissio todella unionin yleistä etua itsenäisenä ja riippumattomana, kuten EU-sopimuksen 17 artiklassa edellytetään. Tiettyjen järjestelyjen myötä Euroopan parlamentin ja komission suhde on kehittynyt siihen suuntaan, että komissio toimii jossain määrin parlamentille vastuunalaisena hallituksena. Artikkelissa kritisoidaan, että kehitys ei välttämättä lähennä kansalaisia unionin toimielimiin ja että kehitys omiaan vaarantamaan komission aseman verrattain riippumattomana välittäjänä trilogeissa. Kolmas artikkeli sisältää tapaustutkimuksen kuluttajille myönnettäviä luottoja sääntelevän direktiivin (2008/48/EY) valmisteluvaiheista. Tapaustutkimus konkretisoi Suomen hallituksen edustajien tekemän EU-vaikuttamisen keinoja, vahvuuksia ja kehittämiskohteita. Artikkelissa todetaan, että Suomelle aivan keskeinen vaikuttamisresurssi ovat sellaiset virkamiehet, jotka hallitsevat niin käsiteltävän säädöshankkeen sisältökysymykset kuin unionin päätöksentekomenettelyt ja toimielinten institutionalisoituneet käytännöt. Artikkelissa tehdyt empiiriset havainnot jäsenvaltioiden välillä käydyistä neuvotteluista tukevat konstruktiivisen mallin perusoletuksia. Neljännessä artikkelissa, joka on laadittu yhteistyönä professori Tapio Raunion kanssa, analysoidaan unioniasioiden kansallista valmistelua ja tarkemmin ottaen sitä, miten Suomen neuvottelukannat muotoutuvat valtioneuvoston yhteensovittamisjärjestelmän ylimmällä tasolla EU-ministerivaliokunnassa. Artikkelissa todetaan laajan pöytäkirja-aineiston ja sitä täydentävän haastatteluaineiston pohjalta, että EUministerivaliokunnan asialistan laadinta on delegoitu kokonaisuudessaan asiantuntijavirkamiehille. Lisäksi asialistan muotoutumiseen vaikuttaa luonnollisesti unionin toimielinten, erityisesti Eurooppa-neuvoston agenda. Toisaalta, EU-ministerivaliokunnan kokouksissa ministerit yksin tekevät päätöksiä ja linjaavat Suomen EU-politiikkaa. Viidennessä artikkelissa selvitetään, miten olisi toimittava, jos pyritään siihen, että uusi tai muutettu EU-säädös vastaisi mahdollisimman pitkälti Suomen kansallisesti määriteltyä neuvottelukantaa. Tehokkainta on vaikuttaa aloiteoikeutta lainsäädäntömenettelyssä käyttävään komissioon, tarvittaessa myös virkahierarkian ylimmillä tasoilla, sekä tehdä yhteistyötä muiden jäsenvaltioiden kanssa, erityisesti puheenjohtajavaltion, tulevien puheenjohtajavaltioiden ja suurten jäsenvaltioiden kanssa. Mikäli käsittelyssä oleva EU-säädöshanke arvioidaan kansallisesti erityisen tärkeiksi tai ongelmalliseksi, tulisi vaikuttamistoimia laajentaa kattamaan myös Euroopan parlamentin avainhenkilöitä. Kuudennessa artikkelissa analysoidaan suomalaisen kansalaisyhteiskunnan ja etujärjestöjen vaikutusmahdollisuuksia EU-asioiden valmistelussa. Johtopäätöksenä todetaan, että muodollinen yhteensovittaminen EU-valmistelujaostojen laajan kokoonpanon kokouksissa ei ole sidosryhmille ensisijainen eikä tehokkain vaikuttamisen keino. Sen sijaan korostuvat epäviralliset yhteydet toimivaltaisen ministeriön vastuuvirkamieheen kotimaassa ja vaikuttaminen eurooppalaisen kattojärjestön välityksellä. Väitöskirjan yhteenveto-osassa on eritelty, missä EU:n säädösvalmistelun ja lainsäätämismenettelyn vaiheissa Suomen kaltaisella pienellä jäsenvaltiolla on parhaat edellytykset vaikuttaa valmisteltavana olevaan säädökseen. Parhaat vaikutusmahdollisuudet ovat aivan EU-säädöksen elinkaaren alkuvaiheessa, kun komissio on vasta käynnistämässä uutta säädösvalmistelua. Väitöstutkimuksessa todetaan, että varhaista kannanmuodostusta ja sen mahdollistamaa ennakkovaikuttamista on Suomessa kyetty kehittämään etenkin niissä poliittisesti, taloudellisesti tai oikeudellisesti tärkeissä hankkeissa, joissa hallituksen kannanmuodostus tapahtuu EU-ministerivaliokunnassa. Muissa unionin säädöshankkeissa ennakollisen vaikuttamisen intensiteetti näyttäisi vaihtelevan, riippuen muun muassa toimivaltaisen ministeriön keskijohdon ja ylimmän johdon sitoutumisesta. Toinen Suomelle otollinen vaikuttamisen ajankohta on silloin, kun komission antamaa ehdotusta käsitellään asiantuntijavirkamiesten kesken neuvoston työryhmässä. Tehokas vaikuttaminen edellyttää, että Suomea neuvotteluissa edustavat henkilöt kokoavat ”samanmielisistä” jäsenvaltioista kaksoisenemmistösäännön mukaisen voittavan koalition. Viimeinen vaikuttamisen ikkuna aukeaa silloin, kun Coreper-komiteassa laaditaan neuvoston puheenjohtajalle neuvottelumandaattia toimielinten välisiin trilogeihin tavallisen lainsäätämisjärjestyksen ensimmäisessä käsittelyssä. Tässä varsin myöhäisessä menettelyvaiheessa vaikuttaminen on pienen jäsenvaltion näkökulmasta jo selvästi vaikeampaa. Väitöskirja sijoittuu luontevasti osaksi valtiotieteellistä eurooppalaistumis-kirjallisuutta siltä osin, kuin siinä on tutkittu EU-jäsenyyden vaikutuksia kotimaisiin hallinnon rakenteisiin ja politiikan asialistaan. Kuten tunnettua, Suomen EU-politiikka rakentuu eduskunnalle vastuullisen valtioneuvoston varaan. Väitöskirjassa ei kuitenkaan ole otettu erityiseen tarkasteluun perustuslakiin sidottua eduskunnan ja hallituksen yhteistoimintaa EU-asioissa. Sen sijaan on tutkittu unioniasioiden valmistelua ja yhteensovittamista valtioneuvoston sisällä. Kun EU-asioiden yhteensovittamisjärjestelmää luotiin, pidettiin tärkeänä, että jokaisessa säädöshankkeessa ja politiikkahankkeessa kyetään muodostamaan kansallisesti yksi ja yhtenäinen neuvottelupositio. Yhtenäisen kansallisen linjan ajamisen katsottiin parantavan Suomen asemaa unionin päätöksenteossa. Väitöskirjassa todetaan johtopäätöksenä, että EU-asioiden kansallinen valmistelujärjestelmä toteuttaa sille asetetut tavoitteet käytännössä varsin hyvin. Merkittävin kehittämiskohde liittyy kansallisen EU-valmistelun reaktiivisuuteen. Jos Suomi haluaa vaikuttaa yhä vahvemmin EU-lainsäätämiseen, Suomelle tärkeät hankkeet pitäisi tunnistaa jo varhaisessa vaiheessa ja priorisoida selkeästi niiden hoitamista ministeriöissä.

Engineer-to-order tuotteen ja tuotannon kehittäminen kohti massakustomointia

Tämän kandidaatinyön tavoitteena on selvittää keinoja joilla ETO-yhtiö voi kehittää tuotettaan ja tuotantoaan kohti massakustomointi. Lisäksi selvitetään mitkä asiat vaikuttavat asiakastilauksen kytkentäpisteen asettamiseen siirtyessä massakustomointiin. Työ on tehty kirjallisuuskatsauksena. Esitettyjen tietojen ja tulosten pohjana on alan kirjallisuus sekä julkaistut artikkelit. Työn perusteella voidaan todeta että parhaimmat keinot massakustomoinnin tavoitteluun ETO-yhtiölle ovat; tuotannon ja tuotteiden kehittäminen siten että pystytään hyödyntämään modularisointia ja komponenttien standardointia, lisäksi tuotesuunnitteluun käytettävää aikaa tulee vähentää automatisoimalla tuotesuunnittelua tai käyttämällä standardi suunnitelmia. ETO-yhtiössä siirtyessä massakustomointiin tulee asiakastilauksen kytkentäpisteen paikkaa asetettaessa ottaa huomioon tuotannon ja suunnittelun ulottuvuus kytkettynä asiakkaan vaatimuksiin.

Cognitive performance of young and elderly subjects on the free word recall memory test: effect of presentation order on recall order

The influence of aging on memory has been extensively studied, but the importance of short-term memory and recall sequence has not. The objective of the current study was to examine the recall order of words presented on lists and to determine if age affects recall sequence. Physically and psychologically healthy male subjects were divided into two groups according to age, i.e., 23 young subjects (20 to 30 years) and 50 elderly subjects (60 to 70 years) submitted to the Wechsler Adult Intelligence Scale-Revised and the free word recall test. The order of word presentation significantly affected the 3rd and 4th words recalled (P < 0.01; F = 14.6). In addition, there was interaction between the presentation order and the type of list presented (P < 0.05; F = 9.7). Also, both groups recalled the last words presented from each list (words 13-15) significantly more times 3rd and 4th than words presented in all remaining positions (P < 0.01). The order of word presentation also significantly affected the 5th and 6th words recalled (P = 0.05; F = 7.5) and there was a significant interaction between the order of presentation and the type of list presented (P < 0.01; F = 20.8). The more developed the cognitive functions, resulting mainly from formal education, the greater the cognitive reserve, helping to minimize the effects of aging on the long-term memory (episodic declarative).

Generalization of temporal order detection skill learning: two experimental studies of children with dyslexia

The objective of this study was to investigate the phenomenon of learning generalization of a specific skill of auditory temporal processing (temporal order detection) in children with dyslexia. The frequency order discrimination task was applied to children with dyslexia and its effect after training was analyzed in the same trained task and in a different task (duration order discrimination) involving the temporal order discrimination too. During study 1, one group of subjects with dyslexia (N = 12; mean age = 10.9 ± 1.4 years) was trained and compared to a group of untrained dyslexic children (N = 28; mean age = 10.4 ± 2.1 years). In study 2, the performance of a trained dyslexic group (N = 18; mean age = 10.1 ± 2.1 years) was compared at three different times: 2 months before training, at the beginning of training, and at the end of training. Training was carried out for 2 months using a computer program responsible for training frequency ordering skill. In study 1, the trained group showed significant improvement after training only for frequency ordering task compared to the untrained group (P < 0.001). In study 2, the children showed improvement in the last interval in both frequency ordering (P < 0.001) and duration ordering (P = 0.01) tasks. These results showed differences regarding the presence of learning generalization of temporal order detection, since there was generalization of learning in only one of the studies. The presence of methodological differences between the studies, as well as the relationship between trained task and evaluated tasks, are discussed.

Effects of different levels of positive airway pressure on breathing pattern and heart rate variability after coronary artery bypass grafting surgery

The application of continuous positive airway pressure (CPAP) produces important hemodynamic alterations, which can influence breathing pattern (BP) and heart rate variability (HRV). The aim of this study was to evaluate the effects of different levels of CPAP on postoperative BP and HRV after coronary artery bypass grafting (CABG) surgery and the impact of CABG surgery on these variables. Eighteen patients undergoing CABG were evaluated postoperatively during spontaneous breathing (SB) and application of four levels of CPAP applied in random order: sham (3 cmH2O), 5 cmH2O, 8 cmH2O, and 12 cmH2O. HRV was analyzed in time and frequency domains and by nonlinear methods and BP was analyzed in different variables (breathing frequency, inspiratory tidal volume, inspiratory and expiratory time, total breath time, fractional inspiratory time, percent rib cage inspiratory contribution to tidal volume, phase relation during inspiration, phase relation during expiration). There was significant postoperative impairment in HRV and BP after CABG surgery compared to the preoperative period and improvement of DFAα1, DFAα2 and SD2 indexes, and ventilatory variables during postoperative CPAP application, with a greater effect when 8 and 12 cmH2O were applied. A positive correlation (P < 0.05 and r = 0.64; Spearman) was found between DFAα1 and inspiratory time to the delta of 12 cmH2O and SB of HRV and respiratory values. Acute application of CPAP was able to alter cardiac autonomic nervous system control and BP of patients undergoing CABG surgery and 8 and 12 cmH2O of CPAP provided the best performance of pulmonary and cardiac autonomic functions.

Effect of soaking and cooking on phytate concentration, minerals, and texture of food-type soybeans

The increasing consumption of soybeans due to its bioactive compounds has attracted interest in describing the grain's constituents and variation during processing. Phytate has been the aim of much research since it chelates essential minerals but also has beneficial antioxidant effects. This study evaluated the variation of phytate, calcium, zinc, and iron during soaking and cooking of soybeans. The phytate: Zn and phytate: Fe molar ratios were determined in order to estimate the bioavailability of these minerals. Six food-type varieties were used: BR 36, BRS 213, BRS 216, BRS 232, BRS 155, and Embrapa 48. The samples were soaked in water 3:1 (w/w) for 12 hours at room temperature and cooked. Cooking time was determined by modeling the softening of each variety using fractional conversion. Water content, phytate, and minerals were determined in raw, soaked and cooked samples. The water content of raw grains for all varieties was 9.9 g.100 g-1 increasing to a range of 58.1-63.7 g.100 g-1 after soaking and 63.1-66.0 g.100 g-1 after cooking. Soaking caused a significant reduction in phytate (23-30%), but cooking caused no additional reduction. The phytate: Zn molar ratio was 20 indicating that zinc absorption could be impaired, while the phytate: Fe molar ratio was 8, below the level of compromising absorption

A statistical approach to define some tofu processing conditions

The aim of this work was to make tofu from soybean cultivar BRS 267 under different processing conditions in order to evaluate the influence of each treatment on the product quality. A fractional factorial 2(5-1) design was used, in which independent variables (thermal treatment, coagulant concentration, coagulation time, curd cutting, and draining time) were tested at two different levels. The response variables studied were hardness, yield, total solids, and protein content of tofu. Polynomial models were generated for each response. To obtain tofu with desirable characteristics (hardness ~4 N, yield 306 g tofu.100 g-1 soybeans, 12 g proteins.100 g-1 tofu and 22 g solids.100 g-1 tofu), the following processing conditions were selected: heating until boiling plus 10 minutes in water bath, 2% dihydrated CaSO4 w/w, 10 minutes coagulation, curd cutting, and 30 minutes draining time.

Improving business processes in a globally dispersed make-to-order supply chain. Case study on outbound logistics in a Multinational Corporation

The purpose of this thesis is to find out how outbound logistics process can be improved by reducing unnecessary waste in a globally dispersed make-to-order (MTO) supply chain. The research problem was addressed by a multinational corporation that aims to find a solution for reducing unnecessary waste in their outbound logistics process. The focus is on customized products that are delivered via sea transportation. Theoretical framework for improving outbound logistics processes in globally dispersed MTO supply chain was created based on business process management, Porter’s value chain theory, value stream mapping and current reality tree. The empirical research was conducted by using constructive approach due to its ability to research a practical problem and to improve the existing practices. The data was collected from ten semi-structured interviews and three non-participant observations. By analysing the data and applying the theoretical framework, five types of waste were detected in the process that were seen to derive from six root causes. Practical solution was constructed to reduce the waste in the process by combining the existing literature with the ideas raising from empirical data. The results of this thesis suggest that a MNC with a globally dispersed MTO supply chain can improve its outbound logistics process by applying activities that enhance internal and external integration, collaboration and coordination, and increase predictability of the process. This research has practical relevance both for the case company as well as for other MNCs with globally dispersed MTO supply chains that aim to improve their outbound logistics processes. This research contributes to the BPM and CRA research by providing an evidence for their applicability in the new context.

Order and membrane organization in chlorhexidine-lipid mixtures /

Formulations of a general bactericidal agent, chlorhexidine, mixed with a phospholipid at different concentrations are investigated using ^H NMR spectroscopy on a chain-deuterated lipid analog. Lipid-chlorhexidine formulation is known to release the drug into an aqueous medium slowly, maintaining a comparable concentration of the drug for up to four times longer than a direct aqueous solution. The NMR data does not support the proposed liposomal entrapment of chlorhexidine in lipid compartments. Complex thermal history of the lipid-chlorhexidine preparations is investigated in detail. In preparation for a counterpart measurement, using ^H NMR of deuterated chlorhexidine mixed with protonated lipid, the synthesis of a deuterated analog of chlorhexidine is performed.