Substrate with Organosuper® for cucumber seedlings formation in protected environments and polystyrene trays

Culture environments, trays and doses of organic compost were evaluated in the formation of cucumber seedlings (Cucumis sativus L.). Five environmental conditions were tested: (A1) a greenhouse with height of 2.5 m, covered with polyethylene film, (A2) nursery with height of 2.5 m, monofilament fabric, 50% shading, (A3) nursery with height of 2.5 m, heat-reflective screen, 50% shading, (A4) nursery with a height of 1.8 m, covered with coconut tree straw and (A5) greenhouse with height of 4.0 m, covered with polyethylene film, with zenith opening and thermo-reflective cloth under the plastic. Trays of 72 (R1) and 128 (R2) cells were filled with 93% soil and 7% organic compound (S1), 86% soil and 14% organic compound (S2) and 79% soil and 21% organic compound (S3). It was used a randomized design in split-split-plot scheme, with five replicates (environments x trays x substrates). The greenhouses provide the best environments for the formation of cucumber seedlings. A tray of 72 cells is the best container, promoting more vigorous seedlings in substrate with soil and 7 or 14% organic compound.

Formation of beetroot seedlings in different protected environments, substrates and containers in Aquidauana region, State of Mato Grosso do Sul, Brazil

This study with beetroot seedlings, cultivar Top Tall Early Wonder, was carried out at the State University of Mato Grosso do Sul (UEMS/Aquidauana), from October to November 2008. Three environments of cultivation were used: greenhouse; nursery with monofilament screen of 50 % of shading; and nursery with aluminized thermal reflective screen of 50% of shading. In these environments, three polystyrene trays of 72, 128 and 200 cells, filled with four substrates, were tested: soil; Plantmax®; coconut fiber and vermiculite. There were no replication environments and then each one was considered an experiment alone. For each environment, it was adopted a completely randomized design in factorial scheme 3x4 (three trays x four substrates), with four replications, performing individual analysis of variance and joint analysis of experiments for environment comparisons. The monofilament screen is the best environment for seedlings produced in tray of 72 cells, and the greenhouse was the best environment for seedlings produced in trays of 128 cells. The best seedlings were formed in the tray of 72 cells. Vermiculite was the best substrate.

Atrazine bound residues formation and dissipation in subtropical soil under swine wastewater application

The effects of swine wastewater on atrazine dissipation and formation of bound residues in subtropical clay soil were investigated in this study. The experiment was carried out in laboratory, under room conditions, where samples of Rhodic Hapludox soil received 168.61 mg kg-1 of atrazine and were incubated for 60 days in the following treatments: T1 (sterilized soil + swine wastewater), T2 (sterilized soil + distilled water), T3 (Non sterilized soil + swine wastewater) and T4 (Non sterilized soil + distilled water). The extractable residues and bound residues of atrazine were extracted and analyzed by high performance liquid chromatography. The results showed no effect of swine wastewater on atrazine dissipation. However, the addition of swine wastewater favored the increase of bound residues, which can increase the persistence of atrazine in the environment and reduce its bioavailability.

Finnish Institutional Innovation Support Policies from Russian Entrepreneurs' Perspective: Establishing Cross-Border Technology Oriented Start-Up Firm

The purpose of this thesis is to study how Russian entrepreneurs perceive Finnish institutional environment and innovation support policies provided in the country, as well as to present a practical example in form of a case study of one technology oriented start-up firm which was established in Finland by Russian entrepreneurs. The empirical research of the thesis is conducted qualitatively in two parts. First part is conducted through online questionnaire with open questions in order to review the perceptions of Russian entrepreneurs in general. Second part is based on personal interviews with case company’s founders with the focus on the process of establishing the company in Finland. In the first part of the empirical research, five Russian start-up firms were contacted, and four responses were received. All of these responses were qualified for further analysis. The findings of the first part of the research reveal that Russian entrepreneurs have rather positive attitudes towards Finnish institutional innovation support policies. However, most of the entrepreneurs stated that they are unlikely to create their presence in Finland. As an outcome of the second part of the research, the process of establishing a case company in Finland is illustrated. In order to be able to establish companies in Finland, Russian entrepreneurs who have a permanent residence outside European Economic Area (EEA) are required to apply for a permission to perform business operations in the country. In addition, the established company must engage in improving the economical stand of the country by creating new work places, raising tax revenues, develop technologies and generate innovations in the country.

Atenolol prevents the formation of expansive hematoma after rhytidoplasty

Objective: To evaluate the perioperative use of atenolol in reducing the incidence of hematoma after rhytidoplasty.Methods: Between January 2007 and February 2013, 80 patients were randomized into two groups: Group A (n = 26) received perioperative atenolol in order to maintain heart rate (PR) around 60 per minute; Group B (n = 54) did not receive atenolol. Both groups underwent the same anesthetic and surgical technique. We monitored blood pressure (BP), HR, hematoma formation and the need for drainage. Patients were followed-up until the 90th postoperative day. The variables were compared between the groups using the ANOVA test. Continuous variables were presented as mean ± standard deviation and the differences were compared with the Student's t test. Values of p d" 0.05 were considered significant.Results: In group A the mean BP (110-70mmHg ± 7.07) and HR (64 / min ± 5) were lower (p d" 0.05) than in group B (135-90mmHg ± 10.6) and (76 / min ± 7.5), respectively. There were four cases of expansive hematoma in group B, all requiring reoperation for drainage, and none in group A (p d" 0,001).Conclusion: The perioperative use of atenolol caused a decrease in blood pressure and heart rate and decreased the incidence of expanding hematoma after rhytidectomy.

Pasvik Water Quality Report Environmental Monitoring Programme in the Norwegian, Finnish and Russian Border Area

The Pasvik monitoring programme was created in 2006 as a result of the trilateral cooperation, and with the intention of following changes in the environment under variable pollution levels. Water quality is one of the basic elements of the Programme when assessing the effects of the emissions from the Pechenganikel mining and metallurgical industry (Kola GMK). The Metallurgic Production Renovation Programme was implemented by OJSC Kola GMK to reduce emissions of sulphur and heavy metal concentrated dust. However, the expectations for the reduction in emissions from the smelter in the settlement Nikel were not realized. Nevertheless, Kola GMK has found that the modernization programme’s measures do not provide the planned reductions of sulfur dioxide emissions. In this report, temporal trends in water chemistry during 2000–2009 are examined on the basis of the data gathered from Lake Inari, River Pasvik and directly connected lakes, as well as from 26 small lakes in three areas: Pechenganikel (Russia), Jarfjord (Norway) and Vätsäri (Finland). The lower parts of the Pasvik watercourse are impacted by both atmospheric pollution and direct wastewater discharge from the Pechenganikel smelter and the settlement of Nikel. The upper section of the watercourse, and the small lakes and streams which are not directly linked to the Pasvik watercourse, only receive atmospheric pollution. The data obtained confirms the ongoing pollution of the river and water system. Copper (Cu), nickel (Ni) and sulphates are the main pollution components. The highest levels were observed close to the smelters. The most polluted water source of the basin is the River Kolosjoki, as it directly receives the sewage discharge from the smelters and the stream connecting the Lakes Salmijarvi and Kuetsjarvi. The concentrations of metals and sulphates in the River Pasvik are higher downstream from the Kuetsjarvi Lake. There has been no fall in the concentrations of pollutants in Pasvik watercourse over the last 10 years. Ongoing recovery from acidification has been evident in the small lakes of the Jarfjord and Vätsäri areas during the 2000s. The buffering capacity of these lakes has improved and the pH has increased. The reason for this recovery is that sulphate deposition has decreased, which is also evident in the water quality. However, concentrations of some metals, especially Ni and Cu, have risen during the 2000s. Ni concentrations have increased in all three areas, and Cu concentrations in the Pechenganickel and Jarfjord areas, which are located closer to the smelters. Emission levels of Ni and Cu did not fall during 2000s. In fact, the emission levels of Ni compounds even increased compared to the 1990s.

Effects of hyperprolactinemia and ovariectomy on the tibial epiphyseal growth plate and bone formation in mice

PURPOSE: To evaluate the effects of ovariectomy and the hyperprolactinemia procedure in the tibial epiphyseal growth plate of female mice.METHODS: In this study, the epiphyseal growth plate of ovariectomized (OVX) and/or rendered hyperprolactinemic female mice by 50 days of treatment with 200 μg metoclopramide (M) was evaluated morphologically, morphometrically and immuno-histochemically. Forty female and adult mice were divided into four groups according to treatment: V group - animals treated with saline solution; H group - hyperprolactinemic animals; Ovx/V group - ovariectomized animals and treated with saline solution; Ovx/H group - hyperprolactinemic and ovariectomized animals. After the treatment period, the animals were sacrificed, tibia was removed and fixed in 10% buffered formalin and decalcified in 10% formic acid. The material was immersed in paraffin and subjected to histological processing in paraffin. The sections were stained with Masson's trichrome and immunohistochemistry was carried out for the pro-apoptotic protein BCL-2. The images for the morphological and morphometric study were analyzed with the imaging program AxioVision 4.8 (Carl-Zeiss(r), Germany).RESULTS: The combination of hyperprolactinemia and the ovariectomy procedure decreased the number of resting chondrocytes 1.5-fold, the number of proliferative chondrocytes 1.8-fold; the percentage of resting cartilage 2.4-fold and the percentage of trabecular bone 2.1-fold, compared with respective control animals.CONCLUSION: The procedure of ovariectomy combined with the metoclopramide-induced hyperprolactinemia in female mice has showed marked bone degeneration due to significant decrease of cell proliferation in the epiphyseal growth plate and bone formation.

Evaluation of Bubble Formation and Break Up in Suppression Pools by Using Pattern Recognition Methods

During a possible loss of coolant accident in BWRs, a large amount of steam will be released from the reactor pressure vessel to the suppression pool. Steam will be condensed into the suppression pool causing dynamic and structural loads to the pool. The formation and break up of bubbles can be measured by visual observation using a suitable pattern recognition algorithm. The aim of this study was to improve the preliminary pattern recognition algorithm, developed by Vesa Tanskanen in his doctoral dissertation, by using MATLAB. Video material from the PPOOLEX test facility, recorded during thermal stratification and mixing experiments, was used as a reference in the development of the algorithm. The developed algorithm consists of two parts: the pattern recognition of the bubbles and the analysis of recognized bubble images. The bubble recognition works well, but some errors will appear due to the complex structure of the pool. The results of the image analysis were reasonable. The volume and the surface area of the bubbles were not evaluated. Chugging frequencies calculated by using FFT fitted well into the results of oscillation frequencies measured in the experiments. The pattern recognition algorithm works in the conditions it is designed for. If the measurement configuration will be changed, some modifications have to be done. Numerous improvements are proposed for the future 3D equipment.

The role of due diligence in cross-border acquisitions

Mergers and acquisitions (M&A) have become an important strategy for international expansion, even though numerous acquisitions fail to achieve their financial and strategic objectives. The risk associated with transactions partly depends on the extent to which the insight into the target company actually holds true. Due diligence is performed to eliminate this information asymmetry. Due diligence is an audit conducted prior to the planned transaction. It can be described as a purposeful and systematic investigation of business opportunity and risk during on-going sale negotiations. The importance of due diligence is emphasized widely in the academic literature as well as among M&A practitioners. On the other hand, researches and practitioners have differing views on what and how much is enough for a due diligence audit. Therefore, this study examines the role of due diligence in a cross-border acquisition process. The main objective of the research is fulfilled by examining the reasons for conducting due diligence, recognizing the elements affecting effective due diligence and analyzing the need and opportunities for enhancing the utilization of due diligence. For the empirical part of this qualitative study five expert interviews were conducted among experienced Finnish acquirers and advisors. In addition, five expert interviews conducted for a distinct study were utilized as a secondary source of data. The results of this study present fundamental reasons for conducting due diligence. However, conducting due diligence is not always self-evident. Doubtful attitude towards due diligence exists, though it is exceptional. Carefully planning the focus of due diligence and compiling and managing the team conducting due diligence are identified as the main elements affecting effective due diligence. Altogether, due diligence can have plural roles which in this study are categorized as the confirmatory, preparative, and cross-functional roles of due diligence. The older academic literature tends to emphasize the confirmatory role whereas the current academic discussion also supports the preparative role of due diligence. It can be argued that the roles of due diligence differ among experienced due diligence practitioners based on several factors. In attempt to increase the value of due diligence for acquirers, more than one role of due diligence is likely to exist. As a result of the different approaches and the controversy regarding the concept of due diligence, the demand for a new, wider definition of due diligence can be claimed to exist.

Genital morphology of the male South American fur seal (Arctocephalus australis) and biological implications

Male capacity for spreading genes to a great number of descendents and to determine population dynamics depend directly on the genital organs. Morphological studies in pinnipeds are scarce and the functional meaning of some characteristics has never been discussed. We hypothesized that Arctocephalus australis (A. australis) shows morphophysiological adaptations in order to guarantee the perpetuation of the species in the unique annual mating season. Seven males, dead from natural causes, had their genital organs collected and fixed for morphological description. Some features differ from other described mammalian males and are closely related to the biology and reproductive cycle of this species, as the scrotal epidermis, absence of glandular portion in the ductus deferens and spermatogenic epithelium suggest a recrudescent testis period. The corona glandis exhibits a singular arrangement: its erectile border looks like a formation of petals and its association with the os penis gives a "lily-flower" form to this region. We propose the name margo petaliformis to this particular erectile border of the corona glandis because of its similarity to a flower corola. The male genital organs of A. australis show morphological features compatible with adaptation to environment requirements and reproductive efficiency.

Bordering with Culture(s): Europeanization and Cultural Agency at the External Border of the European Union.

Rajallistamisen kulttuuri(t): Eurooppalaistuminen ja kulttuurinen toimijuus Euroopan unionin ulkorajalla Euroopan integraation ja Euroopan unionin laajentumisen myötä EU:n sisärajat ovat avautuneet kun taas sen ulkorajoilla lisääntyvää rajan ylitysten valvontaa on pyritty kompensoimaan yhteistyön merkitystä ja verkostoitumista painottamalla. Tämä tutkimus pyrkii ymmärtämään EU:n ulkorajan muutosten merkitystä paikalliselle hyvinvoinnille sekä laajemmin ylirajaisuuden merkitystä identiteettien rakentamiselle raja-alueilla. EU:n ulkorajalla Puolassa ja Suomessa toteutettavat rajat ylittävät, kulttuuriin ja kulttuuriperintöön liittyvät, projektit kertovat eurooppalaistumisesta ja sen vaikutuksista kulttuurisen horisontin muutokselle. Voidaan nähdä miten Eurooppa kulttuurisena konstruktiona tulee paikallisesti merkittäväksi tavoilla jotka kertovat myös paikallisten toimijoiden mahdollisuuksista osallistua EU-rajan muutoksia ja paikallisuutta määritteleviin prosesseihin. Tällöin erityisesti raja-alueiden materiaalisen perinnön, ja sen mahdollistamien rajaan liittyvien neuvottelujen, voidaan nähdä kertovat Eurooppalaistumisesta myös ns. alhaaltapäin muotoutuvana prosessina. Artikkeliväitöskirjan taustalla on Puolan ja Suomen toisen maailmansodan seurauksena luovuttamien raja-alueiden (Kresy ja Karjala) asema nykyisellä Euroopan unionin ulkorajalla. Tutkimusidea perustuu tutkijan omiin kokemuksiin projekteista Puolan ja Ukrainan raja-alueella vuonna 2003, ennen Puolan liittymistä EU:hun vuonna 2004. Tutkimusaineisto on peräisin vuosien 2005-2009 aikana tehdyistä ns. monipaikkaisista (multi-sited) kenttätöistä EU:n ulkorajalla, pääosin Puolassa ja Suomessa, joissa kohteena olivat kulttuuria ja kulttuuriperintöä hyödyntävät, pääosin EU-rahoitetut, rajat ylittävät projektit. Materiaalit koostuvat 34 projektitoimijan haastatteluista, projektien materiaaleista, kenttätöiden havainnoista, paikallisten sanomalehtien artikkeleista sekä eri tasoilla (EU, kansallinen, alueellinen) tuotetuista ohjelmadokumenteista. Huomio kiinnittyy projektitoimijoiden tapoihin tehdä rajanylityksiä, sekä heidän tapaansa kokea ja hyödyntää raja-alueiden kulttuuriperintöä sekä ymmärtää niiden nykyistä kulttuurista moninaisuutta. Tällöin havaitaan miten erilaiset eurooppalaiset ideat, representaatiot ja käytänteet tulevat osaksi erilaisia translokaaleja, rajat ylittäviä ja paikallis-eurooppalaisia, suhteita. Vertailun kohteeksi eivät tällöin asetu projektit, toimijat tai raja-alueet sinänsä, vaan näihin suhteisiin liittyvä kulttuurinen toimijuus. Keskeinen käsite tutkimuksessa on ’rajallistaminen’, eli sen havaitseminen, miten jokainen rajan ylitys tarkoittaa myös neuvottelua rajasta. Rajan ylitys voi siis tarkoittaa myös sen vahvistamista. Myös itse raja voi asettua toiminnan kohteeksi, jolloin nousee esiin se, miten rajat ylittäviä ”kulttuureja” käytetään ja mitkä ovat niiden rajaan liittyvät paikalliset merkitykset. Kysymys on siitä kuka, ja kenelle, rajan merkityksiä neuvottelee? Projektitoimijoiden voidaan nähdä neuvottelevan näitä erilaisia ”kulttuureja” jotka tuottavat rajaa neuvottelevia suhteita, kuten esimerkiksi yhteistyön verkostojen tapaa ohittaa rajan paikallinen merkitys. Tämä rajallistaminen voi kuitenkin tarkoittaa myös paikallisten kulttuuristen identifikaatioiden huomioimista. Tällöin kyse on myös sen luovuuden havaitsemisesta, jota yksilöillä on kun he neuvottelevat näitä erilaisia rajallistamisen kulttuureja. Erityisesti toisen maailmansodan seurauksena valtiorajoista tuli vahvasti kansallisia kulttuureja erottavia, mutta nyt kulttuurisista rajoista neuvotellaan ja rajojen yli tapahtuva vuorovaikutus, sekä paikallisen ja Eurooppalaisen tason väliset suhteet, ja niiden moniäänisyys, nousevat tutkimuksen keskiöön. Tutkimuksen yhteenvedon kannalta keskeinen on kysymys raja/alueen kestävyydestä. Tyypillisesti verkostoitumista painottavan rajat ylittävän yhteistyön suhde paikalliseen yhteisöön voi jäädä häilyväksi. Tavoite paikallisen kulttuuriperinnön suojeluun ei itsessään vielä kerro sen merkityksestä paikalliselle hyvinvoinnille. Arvioinnin kannalta on hyödyllistä nähdä miten myös materiaalisella perinnöllä on toimijuutta osana paikallisuutta muokkaavia suhteita. Paikallisten asukkaiden kokemus rajasta voi edelleen olla että se ei ole muuttunut Neuvostoliiton ajoista, toisaalta EU:nkin voidaan toivoa määrittelemään rajansa vielä tarkemmin, jotta sen kansallinen luonne muuttuisi. Tutkimus nostaa esiin miten eurooppalaiset yhteistyötä ja kulttuurista moninaisuutta korostavat ideat ja käytänteet vaikuttavat erityisesti puolalaisten toimijoiden mahdollisuuksiin määritellä EU-rajaan liittyviä prosesseja osana paikallisia kulttuuriperinnön määrittelyjä. Paikallisten rajaan liittyvien kulttuuristen identifikaatioiden liittäminen osaksi projekteja ei kuitenkaan ole helppoa. Toisaalta rajan merkitys on sisäistetty osana arkea, toisaalta taas rajaan liittyvät suuret kertomukset kansallisena ja EU-rajana voivat olla etäännyttäviä tekijöitä. EU-raja, projektit ja monikulttuurisen perinnön autenttisuus ovat kuitenkin raja-alueen toimijoille ja yhteisöille mahdollisuus osallistua rajallistamiseen. Toiminnan kestävyyden kannalta kyse on pitkälti siitä avaako rajallistaminen paikallisen perinnön merkityksiä osana paikallis-eurooppalaisia suhteita.

Biofilm formation by Rhodococcus equi and putative association with macrolide resistance

Abstract: Rhodococcus equi is a facultative intracellular pathogen, which cause severe pyogranulomatous pneumonia in foals and tuberculosis-like lesions in humans. Its ability to form biofilm was described in strains isolated from chronic diseases associated to treatment failures in humans. This study aimed to verify the biofilm formation by 113 R. equi isolated from equine samples (clinical and fecal) using two different methods (biofilm-culturing with and without additional glucose and epifluorescence microscopy). We also aimed to determine the efficacy of azithromycin, clarithromycin and erythromycin on R. equi in established biofilm. We found 80.5% (26/41) and 63% (58/72) biofilm-positive isolates, in fecal and clinical samples, respectively. The additional glucose increased the biofilm formation by R. equi fecal samples, but not by clinical samples. The antimicrobials tested herein were not able to eradicate R. equi in biofilm even at higher concentrations. This is the first study showing the biofilm formation by R. equi isolated from equine samples. Our findings indicate that R. equi biofilm-producers may be more resistant to the antimicrobials evaluated. Further studies are warranted to test this hypothesis.

Modeling of fireside deposit formation in two industrial furnaces

Fireside deposits can be found in many types of utility and industrial furnaces. The deposits in furnaces are problematic because they can reduce heat transfer, block gas paths and cause corrosion. To tackle these problems, it is vital to estimate the influence of deposits on heat transfer, to minimize deposit formation and to optimize deposit removal. It is beneficial to have a good understanding of the mechanisms of fireside deposit formation. Numerical modeling is a powerful tool for investigating the heat transfer in furnaces, and it can provide valuable information for understanding the mechanisms of deposit formation. In addition, a sub-model of deposit formation is generally an essential part of a comprehensive furnace model. This work investigates two specific processes of fireside deposit formation in two industrial furnaces. The first process is the slagging wall found in furnaces with molten deposits running on the wall. A slagging wall model is developed to take into account the two-layer structure of the deposits. With the slagging wall model, the thickness and the surface temperature of the molten deposit layer can be calculated. The slagging wall model is used to predict the surface temperature and the heat transfer to a specific section of a super-heater tube panel with the boundary condition obtained from a Kraft recovery furnace model. The slagging wall model is also incorporated into the computational fluid dynamics (CFD)-based Kraft recovery furnace model and applied on the lower furnace walls. The implementation of the slagging wall model includes a grid simplification scheme. The wall surface temperature calculated with the slagging wall model is used as the heat transfer boundary condition. Simulation of a Kraft recovery furnace is performed, and it is compared with two other cases and measurements. In the two other cases, a uniform wall surface temperature and a wall surface temperature calculated with a char bed burning model are used as the heat transfer boundary conditions. In this particular furnace, the wall surface temperatures from the three cases are similar and are in the correct range of the measurements. Nevertheless, the wall surface temperature profiles with the slagging wall model and the char bed burning model are different because the deposits are represented differently in the two models. In addition, the slagging wall model is proven to be computationally efficient. The second process is deposit formation due to thermophoresis of fine particles to the heat transfer surface. This process is considered in the simulation of a heat recovery boiler of the flash smelting process. In order to determine if the small dust particles stay on the wall, a criterion based on the analysis of forces acting on the particle is applied. Time-dependent simulation of deposit formation in the heat recovery boiler is carried out and the influence of deposits on heat transfer is investigated. The locations prone to deposit formation are also identified in the heat recovery boiler. Modeling of the two processes in the two industrial furnaces enhances the overall understanding of the processes. The sub-models developed in this work can be applied in other similar deposit formation processes with carefully-defined boundary conditions.

Potential for seed bank formation of two weed species from Brazilian Amazonia

The potential for seed bank formation of two perennial weed species, Ipomoea asarifolia (Desr.) Roem. & Schult. (Convolvulaceae) and Stachytarpheta cayennensis (Rich.) M. Vahl (Verbenaceae), both common in Amazonia , was evaluated in a degraded pasture area in eastern Brazilian Amazonia . Seeds were enclosed in nylon mesh packets and placed at the soil surface or buried at 5 or 10 cm deep. The number of viable seeds was recorded at 6, 10, 14 and 18 months after burial. Results showed that S. cayennensis has the ability to form persistent soil seed bank, while I. asarifolia seeds do not build up in the soil seed bank. For S. cayennensis and, to some extent, for I. asarifolia, seed survival was highest at greater burial depths.