The kinetics of two-stage formation of TiAl3 in multilayered Ti/Al foils prepared by accumulative roll bonding

The solid-state reactions of Ti/Al multilayered samples produced by Accumulative Roll Bonding (ARB) have been investigated using differential scanning calorimetry, X-ray diffraction and scanning electron microscopy. The kinetics of the formation of the intermetallic compound TiAl3 was highlighted. Experimental evidence and analysis of the data shows that, there was a two-stage process in the formation of TiAl₃ in the ARB Ti/Al reactive multilayered samples. Calorimetric and microstructural analyses also suggest that the interdiffusion of Al and Ti which led to solid solutions preceded the formation of intermetallic compounds. Despite the apparent chaos in the thickness of the ARB multilayered samples, the distribution of layer spacing did not become broad enough to lose the main features of the double exothermal behaviour. Isothermal DSC shows a larger Avarami constant in ARB Ti/Al multilayered structures than was found in Ti/Al thin films. A modified model based on thin films was set up to describe the kinetic characteristics of the formation of the intermetallic compound TiAl₃ in ARB samples.

Thermal degradation kinetics and morphology of natural rubber/silica nanocomposites

A novel natural rubber/silica (NR/SiO₂) nanocomposite with a SiO₂ loading of 4 wt% is developed by incorporating latex compounding with self-assembly techniques. The SiO₂ nanoparticles are homogenouslydistributed throughout the NR matrix as spherical nano-clusters with an average size of 75 nm. In comparison with the host NR, the thermal resistance of the nanocomposite is significantly improved. The degradation temperatures (T), reaction activation energy(E), and reaction order (n) of the nanocomposite are markedly higher than those of the pure NR, due to significant retardant effect of the SiO₂ nanoparticles.

Poly (vinyl alcohol) / silica nanocomposites: morphology and thermal degradation kinetics

The morphology of self-assembled poly(vinyl alcohol)/silica (PVA/SiO₂) nanocomposites is investigated with atomic force microscopy (AFM) and transmission electron microscopy (TEM). It is found that the SiO₂ nanoparticles are homogenously distributed throughout the PVA matrix in a form of spherical nano-cluster. The average size of the SiO₂ clusters is below 50 nm at the low contents (SiO₂ ≤ 5 wt%), while particle aggregations are clearly observed and their average size markedly increases to 110 nm when 10 wt% SiO₂ is loaded. The thermogravimetric analysis (TGA) shows that the nanocomposite significantly outperforms the pure PVA in the thermal resistance. By using a multi-heating-rate method, the thermal degradation kinetics of the nanocomposite with a SiO₂ content of 5 wt% is compared to the PVA host. The reaction activation energy (E) of the nanocomposite, similar to the pure PVA, is divided into two main stages corresponding to two degradation steps. However, at a given degradation temperature, the nanocomposite presents much lower reaction velocity constants (k), while its E is 20 kJ/mol higher than that of the PVA host.

Thermodynamics and kinetics of the formation of Al2 O3/ MgAl2O4/MgO in Al-Silica metal matrix composite

The formation of Al₂O₃, MgAl₂O₄, and MgO has been widely studied in different Al base metal matrix composites, but the studies on thermodynamic aspects of the Al₂O₃/ MgAl₂O₄/MgO phase equilibria have been limited to few systems such as Al/Al₂O₃ and Al/SiC. The present study analyzes the Al₂O₃/MgAl₂O₄ and MgAl₂O₄/MgO equilibria with respect to the temperature and the Mg content in Al/SiO2 system using an extended Miedema model. There is a linear and parabolic variation in Mg with respect to the temperature for MgAl₂O₄/MgO and Al₂O₃/MgAl₂O₄ equilibria, respectively, and the influence of Si and Cu in the two equilibria is not appreciable. The experimental verification has been limited to MgAl₂O₄/MgO equilibria due to the high Mg content (≥0.5 wt pct) required for composite processing. The study has been carried out on two varieties of Al/SiO₂ composites, i.e., Al/Silica gel and Al/Micro silica processed by liquid metallurgy route (stir casting route). MgO is found to be more stable compared to MgAl₂O₄ at Mg levels ≥5 and 1 wt pct in Al/Silica gel and Al/Micro silica composites, respectively, at 1073 K. MgO is also found to be more stable at lower Mg content (3 wt pct) in Al/Silica gel composite with decreasing particle size of silica gel from 180 micron to submicron and nanolevels. The MgO to MgAl₂O₄ transformation has taken place through a series of transition phases influenced by the different thermodynamic and kinetic parameters such as holding temperature, Mg concentration in the alloy, holding time, and silica particle size.

Exercise performance and V0₂ kinetics during upright and recumbent high-intensity cycling exercise

This study investigated cycling performance and oxygen uptake (VO₂) kinetics between upright and two commonly used recumbent (R) postures, 65ºR and 30ºR. On three occasions, ten young active males performed three bouts of high-intensity constant-load (85% peak workload achieved during a graded test) cycling in one of the three randomly assigned postures (upright, 65ºR or 30ºR). The first bout was performed to fatigue and second and third bouts were limited to 7 min. A subset of seven subjects performed a final constant-load test to failure in the supine posture. Exercise time to failure was not altered when the body inclination was lowered from the upright (13.1 ± 4.5 min) to 65ºR (10.5 ± 2.7 min) and 30ºR (11.5 ± 4.6 min) postures; but it was significantly shorter in the supine posture (5.8 ± 2.1 min) when compared with the three inclined postures. Resulting kinetic parameters from a tri-exponential analysis of breath-by-breath VO₂ data during the first 7 min of exercise were also not different between the three inclined postures. However, inert gas rebreathing analysis of cardiac output revealed a greater cardiac output and stroke volume in both recumbent postures compared with the upright posture at 30 s into the exercise. These data suggest that increased cardiac function may counteract the reduction of hydrostatic pressure from upright ~25 mmHg; to 65ºR ~22 mmHg; and 30ºR ~18 mmHg such that perfusion of active muscle presumably remains largely unchanged, and also therefore, VO₂ kinetics and performance during high-intensity cycling.

Studies on the properties and the thermal decomposition kinetics of natural rubber prepared with calcium chloride

To evaluate calcium chloride coagulation technology, two kinds of raw natural rubber samples were produced by calcium chloride and acetic acid respectively. Plasticity retention index (PRI), thermal degradation process, thermal degradation kinetics and differential thermal analysis of two samples studied. Furthermore, thermal degradation activation energy, pre-exponential factor and rate constant were calculated. The results show that natural rubber produced by calcium chloride possesses good mechanical property and poor thermo-stability in comparison to natural rubber produced by acetic acid.

Solar thermal drying of canarium indicum nuts

Many situations exist in rural areas of developing countries where the help of simple technology can make substantial positive impacts on living conditions, finance, and in this case; sustainability. In the Melanesia region, there are numerous areas identified as needing improvement, including indigenous food preservation which will be addressed with a proposed solar thermal solution utilizing locally available materials as much as possible for low cost local construction. The current knowledge of the drying requirements for the product chosen in this study is quite limited. However, it is believed that solar thermal drying might be feasible for the remote sunny regions as in Melanesia. This paper describes the processes involved in determining the drying parameters of the Canarium indicum nut, and the proposed solar dryer designs that have been considered for the particular environmental conditions and product specifications. Through the selection process, a mixed mode, low-tunnel solar dryer was chosen as the best match to satisfy the different parameters.

Oxygen (O2) kinetics during early recovery from peak exercise in patients with type 2 diabetes

Aims To examine the oxygen (O₂) kinetics during early recovery from peak exercise in patients with Type 2 diabetes and to examine whether oxygen O₂ recovery is associated with fasting glucose and HbA_1c in this population.

Methods Eighty-nine participants (52 men) aged 51.8 ± 7.1 years (mean ± sd) were divided into three groups: normal weight (BMI ≤ 25.0 kg/m²), overweight/obese without diabetes (BMI ≥ 26 kg/m²) and overweight/obese with Type 2 diabetes. Participants were assessed for their aerobic power (VO_2peak) on a cycle ergometer, provided a fasting blood sample and underwent a series of anthropometric measurements. Early recovery period was measured for 60 s from cessation of exercise and expressed as percentage of VO_2peak (higher percentage represents slower recovery).

Results No significant differences were observed for age between the three study groups. Both the overweight/obese groups without diabetes and with Type 2 diabetes had higher BMI than the normal weight group, with no significant differences between overweight/obese participants without diabetes and those with diabetes. Participants with Type 2 diabetes had lower VO_2peak than overweight/obese participants without diabetes and normal weight individuals (19.6 ± 4.8, 22.6 ± 5.4 and 25.7 ± 5.3 ml kg⁻¹ min⁻¹, respectively, P < 0.004 for overall trends). Participants with Type 2 diabetes also had slower recovery in oxygen O₂ kinetics after exercise, compared with both normal weight and overweight/obese individuals without diabetes (56.5 ± 7.7, 49.2 ± 7.2, 47.7 ± 7.4%, P < 0.004 for overall trends). Multiple regression analysis revealed that percentage of oxygen O₂ recovery was a stronger predictor than VO_2peak, BMI or age for fasting glucose and HbA_1c.

Conclusions Patients with Type 2 diabetes have lower VO_2peak and prolonged oxygen O₂ recovery from peak exercise. However, only prolonged oxygen O₂ recovery was associated with fasting glucose and HbA_1c.

RiboSys, a high-resolution, quantitative approach to measure the in vivo kinetics of pre-mRNA splicing and 3'-end processing in Saccharomyces cerevisiae

We describe methods for obtaining a quantitative description of RNA processing at high resolution in budding yeast. As a model gene expression system, we constructed tetON (for induction studies) and tetOFF (for repression, derepression, and RNA degradation studies) yeast strains with a series of reporter genes integrated in the genome under the control of a tetO7 promoter. Reverse transcription and quantitative real-time-PCR (RT-qPCR) methods were adapted to allow the determination of mRNA abundance as the average number of copies per cell in a population. Fluorescence in situ hybridization (FISH) measurements of transcript numbers in individual cells validated the RT-qPCR approach for the average copy-number determination despite the broad distribution of transcript levels within a population of cells. In addition, RT-qPCR was used to distinguish the products of the different steps in splicing of the reporter transcripts, and methods were developed to map and quantify 3′-end cleavage and polyadenylation. This system permits pre-mRNA production, splicing, 3′-end maturation and degradation to be quantitatively monitored with unprecedented kinetic detail, suitable for mathematical modeling. Using this approach, we demonstrate that reporter transcripts are spliced prior to their 3′-end cleavage and polyadenylation, that is, cotranscriptionally.

Evaluation of chlorine decay kinetics expressions for drinking water distribution systems modelling

The decay of chlorine in drinking water involves a complex set of reactions that is usually simplified to first order kinetics in models of water quality in distribution systems. However, to be useful in optimising chlorine dosing regimes, the kinetics expression should accurately describe the shape of the chlorine decay curve for different chlorine doses and be able to simulate re-chlorination. After considering the nature of the reactions involved in chlorine decay, five simplified reaction schemes were evaluated for their suitability to describe chlorine concentration in bulk water. Each scheme was fitted to a sample of experimental data of chlorine decay in raw water obtained from Warragamba Dam (the major source of water supplied to Sydney, Australia). A scheme involving two parallel reactions of organic carbon compounds with chlorine is both necessary and sufficient to satisfy the requirements of modelling chlorine decay accurately.