Performance-Based Quality Assurance/Quality Control (QA/QC) Acceptance Procedures for In-Place Soil Testing Phase 3

One of the objectives of this study was to evaluate soil testing equipment based on its capability of measuring in-place stiffness or modulus values. As design criteria transition from empirical to mechanistic-empirical, soil test methods and equipment that measure properties such as stiffness and modulus and how they relate to Florida materials are needed. Requirements for the selected equipment are that they be portable, cost effective, reliable, a ccurate, and repeatable. A second objective is that the selected equipment measures soil properties without the use of nuclear materials.The current device used to measure soil compaction is the nuclear density gauge (NDG). Equipment evaluated in this research included lightweight deflectometers (LWD) from different manufacturers, a dynamic cone penetrometer (DCP), a GeoGauge, a Clegg impact soil tester (CIST), a Briaud compaction device (BCD), and a seismic pavement analyzer (SPA). Evaluations were conducted over ranges of measured densities and moistures.Testing (Phases I and II) was conducted in a test box and test pits. Phase III testing was conducted on materials found on five construction projects located in the Jacksonville, Florida, area. Phase I analyses determined that the GeoGauge had the lowest overall coefficient of variance (COV). In ascending order of COV were the accelerometer-type LWD, the geophone-type LWD, the DCP, the BCD, and the SPA which had the highest overall COV. As a result, the BCD and the SPA were excluded from Phase II testing.In Phase II, measurements obtained from the selected equipment were compared to the modulus values obtained by the static plate load test (PLT), the resilient modulus (MR) from laboratory testing, and the NDG measurements. To minimize soil and moisture content variability, the single spot testing sequence was developed. At each location, test results obtained from the portable equipment under evaluation were compared to the values from adjacent NDG, PLT, and laboratory MR measurements. Correlations were developed through statistical analysis. Target values were developed for various soils for verification on similar soils that were field tested in Phase III. The single spot testing sequence also was employed in Phase III, field testing performed on A-3 and A-2-4 embankments, limerock-stabilized subgrade, limerock base, and graded aggregate base found on Florida Department of Transportation construction projects. The Phase II and Phase III results provided potential trend information for future research—specifically, data collection for in-depth statistical analysis for correlations with the laboratory MR for specific soil types under specific moisture conditions. With the collection of enough data, stronger relationships could be expected between measurements from the portable equipment and the MR values. Based on the statistical analyses and the experience gained from extensive use of the equipment, the combination of the DCP and the LWD was selected for in-place soil testing for compaction control acceptance. Test methods and developmental specifications were written for the DCP and the LWD. The developmental specifications include target values for the compaction control of embankment, subgrade, and base materials.

The Library beyond (just) the book: Collaboration and co-working spaces for new technology and new technological practices

Libraries have often been first adopters of many new technological innovations, such as, punch cards, computers, barcodes, and e-book readers. It is thus not surprising that many libraries have embraced the advent of the internet as an opportunity to move away from just being repositories of books, towards becoming ideas stores and local network hubs for entrepreneurial thinking and new creative practices. This presentation will look at the case of “The Edge” – an initiative of the State Library of Queensland in Brisbane, Australia, to establish a digital culture centre and learning environment deliberately designed for the co-creation and co-construction of knowledge. This initiative illustrates the potential role of libraries as testing grounds for new technologies and technological practices, which is particularly relevant in the context of the NBN rollout across Australia. It also provides an example of new engagement strategies for innovative co-working spaces that are a vital element in a trend that sees professionals, creatives and designers leave their traditional places of work and embrace the city as their office.

Bone-anchored prosthesis: Update in international developments

This symposium will provide hand-on update on the current development of the load sensors measuring the inner prosthetic loading that can strongly contribute the ever increasing demand for evidence-based clinical practice. Surgical implantations of osseointegrated fixations for bone-anchored prosthesis are developing at an unprecedented pace worldwide (e.g., Australia, UK, Sweden, US). This option is becoming accessible to a wide range of individuals with limb loss. With these new developments come new potential challenges and opportunities for all the stakeholders involved in the prosthetic care of these patients. Clearly, there is a need for those stakeholders, particularly those attending the ISPO, to be informed of the current and upcoming international developments in bone-anchored prostheses. The objectives of this symposium will be: • To present an overview of the current growth of the procedures worldwide (e.g., identification of key players, centers of activities, growth trend) with a strong focus on the introduction of the framework to evaluate the availability of the procedure at national level (e.g., number of patients treated, range of the levels of implantation, number of commercial fixations accessible), • To provide first-hand updates on the latest cutting-edge scientific and clinical developments of fixations and rehabilitations programs (e.g., Innovative design of implant, cost-effectiveness, long-terms rehabilitation outcomes for screw-type fixation, current developments in US, comparative analysis for press-fit type of implant, potential moves toward single-stage surgeries).

Indigenous university champion angles for outcomes

The proportion of Australians to finish uni is about 25 per cent. This figure varies dramatically from the amount of Indigenous kids who attain the same result. Only five percent of Aboriginal and Torres Strait Islanders gain a degree. That's why Marnee Shay from Ilkey on the Sunshine Coast is bucking the trend... above and beyond expectations. She's believed to be the first Aboriginal recipient of the Chancellor's Medal at the University of the Sunshine Coast, and she's now starting a PHD at QUT in Brisbane. The ABC's Jon Coghill asked her about her studies and what the medal signifies.

Quantitative assessment and characterisation of airborne engineered nanoparticles

This research has brought new scientific insight into the characteristics of airborne engineered nanoparticles, which is essential when considering their effects on human health. The key findings of the work were a harmonised and traceable protocol for the size characterisation of engineered nanoparticles, and quantification of their emissions and dynamics in workplaces. The novelty of this project is in coupling a comprehensive experimental measurement approach with innovative and effective data interpretation. Also, for the first time, the existence of a general trend in the emission of nanoparticles from a nanotechnology process was investigated.

Are there generalizable trends in the release of airborne synthetic clay nanoparticles from a jet milling process?

Despite recent efforts to assess the release of nanoparticles to the workplace during different nanotechnology activities, the existence of a generalizable trend in the particle release has yet to be identified. This study aimed to characterize the release of synthetic clay nanoparticles from a laboratory-based jet milling process by quantifying the variations arising from primary particle size and surface treatment of the material used, as well as the feed rate of the machine. A broad range of materials were used in this study, and the emitted particles mass (PM2.5) and number concentrations (PNC) were measured at the release source. Analysis of variance, followed by linear mixed-effects modeling, was applied to quantify the variations in PM2.5 and PNC of the released particles caused by the abovementioned factors. The results confirmed that using materials of different primary size and surface treatment affects the release of the particles from the same process by causing statistically-significant variations in PM2.5 and PNC. The interaction of these two factors should also be taken into account as it resulted in variations in the measured particles release properties. Furthermore, the feed rate of the milling machine was confirmed to be another influencing parameter. Although this research does not identify a specific pattern in the release of synthetic clay nanoparticles from the jet milling process generalizable to other similar settings, it emphasizes that each tested case should be handled individually in terms of exposure considerations.

Do great minds appear in batches?

Despite much scholarly fascination with the question of whether great minds appear in cycles, together with some empirical evidence that historical cycles exist, prior studies mostly disregard the ‘‘great minds’’ hypothesis as it relates to scientists. Rather, researchers assume a linear relation based on the argument that science is allied with the development of technology. To probe this issue further, this study uses a ranking of over 5600 scientists based on number of appearances in Google Books over a period of 200 years (1800–2000). The results point to several peak periods, particularly for scientists born in the 1850–1859, 1897–1906, or 1900–1909 periods, suggesting overall cycles of around 8 years and a positive trend in distinction that lasts around 100 years. Nevertheless,a non-parametric test to determine whether randomness can be rejected indicates that nonrandomness is less apparent, although once we analyse the greatest minds overall, rejection is more likely.

Adapting to concurrent expert evidence in medical litigation

In medical negligence litigation expert evidence has long played a dominant role. The trend towards the use of concurrent expert evidence is now well underway. However, for the lawyers and the doctors involved, the pathway is not yet familiar. Disputes have frequently arisen in the context of pre-hearing expert conclaves, given the adversarial nature of litigation and perhaps fuelled by fears of a less transparent process at this increasingly important stage. This article explains the concurrent expert evidence framework and examines areas of common dispute both in the conclaves and at trial, with a view to providing assistance to legal practitioners working in this area and the medical practitioners called upon to provide expert evidence in such litigation.

Designing 'other' citizens into the city: Investigating perceptions of architectural opportunities for wildlife habitat in the Brisbane CBD

Traditional perceptions of the human-animal relationship in the urban context typically see the spatial rejection of wildlife from the built environment and limiting of biodiversity conservation programs to areas of natural reserve. As urban growth places further spatial demands on natural habitat and contributes to continued global biodiversity loss, the recently introduced conservation approach of reconciliation ecology makes a call promoting ecological stewardship through embedding wildlife habitat within human dominated areas. Coinciding with this, the architectural sphere has seen a recent trend of design investigation addressing artificial animal habitat as features of the built environment. Although these precedents are currently a niche and scattered trend they show potential to address the human-animal dualism challenging the framework of reconciliation ecology. This research explores the role design plays in influencing perceptions of urban wildlife habitat, particularly considering the need to create and communicate value around wildlife biodiversity as a component of urban cultural place-making and ecological literacy. The study purpose sets out to establish a set of approaches and cultural preferences with which to direct further classification and development of this architectural trend. Brisbane is utilised as a case study city, as a locale containing proximities of relatively high wildlife and human populations in an urban setting and an established legislative biodiversity heritage and ethic. Through use of a qualitative and quantitative questionnaire targeting Brisbane residents, the research methodology established that although respondents perceptions generally aligned with traditional prejudice against wildlife around human buildings, artificial habitat intervention would be supported within the CBD provided it allowed for adequate distancing of humans from wildlife and conformed with contextual surroundings, or otherwise addressed habitat through redevelopment at an urban scale. As such further research directions for artificial habitat should focus on integration of artificial habitat as a component of façade design or green infrastructure programs.

Beyond blue gene: Intellectual property and bioinformatics

This article considers the challenges posed to intellectual property law by the emerging field of bioinformatics. It examines the intellectual property strategies of established biotechnology companies, such as Celera Genomics, and information technology firms entering into the marketplace, such as IBM. First this paper argues that copyright law is not irrelevant to biotechnology, as some commentators would suggest. It claims that the use of copyright law and contract law is fundamental to the protection of biomedical and genomic databases. Second this article questions whether biotechnology companies are exclusively interested in patenting genes and genetics sequences. Recent evidence suggests that biotechnology companies and IT firms are patenting bioinformatics software and Internet business methods, as well as underlying instrumentation such as microarrays and genechips. Finally, this paper evaluates what impact the privatisation of bioinformatics will have on public research and scientific communication. It raises important questions about integration, interoperability, and the risks of monopoly. It finally considers whether open source software such as the Ensembl Project and peer to peer technology like DSAS will be able to counter this trend of privatisation.

Identifying and forecasting the reverse salient in video game consoles: A performance gap ratio comparative analysis

This study uses the reverse salient methodology to contrast subsystems in video game consoles in order to discover, characterize, and forecast the most significant technology gap. We build on the current methodologies (Performance Gap and Time Gap) for measuring the magnitude of Reverse Salience, by showing the effectiveness of Performance Gap Ratio (PGR). The three subject subsystems in this analysis are the CPU Score, GPU core frequency, and video memory bandwidth. CPU Score is a metric developed for this project, which is the product of the core frequency, number of parallel cores, and instruction size. We measure the Performance Gap of each subsystem against concurrently available PC hardware on the market. Using PGR, we normalize the evolution of these technologies for comparative analysis. The results indicate that while CPU performance has historically been the Reverse Salient, video memory bandwidth has taken over as the quickest growing technology gap in the current generation. Finally, we create a technology forecasting model that shows how much the video RAM bandwidth gap will grow through 2019 should the current trend continue. This analysis can assist console developers in assigning resources to the next generation of platforms, which will ultimately result in longer hardware life cycles.

Stochastic analysis of a radial-inflow turbine in the presence of parametric uncertainties

This paper presents an uncertainty quantification study of the performance analysis of the high pressure ratio single stage radial-inflow turbine used in the Sundstrand Power Systems T-100 Multi-purpose Small Power Unit. A deterministic 3D volume-averaged Computational Fluid Dynamics (CFD) solver is coupled with a non-statistical generalized Polynomial Chaos (gPC) representation based on a pseudo-spectral projection method. One of the advantages of this approach is that it does not require any modification of the CFD code for the propagation of random disturbances in the aerodynamic and geometric fields. The stochastic results highlight the importance of the blade thickness and trailing edge tip radius on the total-to-static efficiency of the turbine compared to the angular velocity and trailing edge tip length. From a theoretical point of view, the use of the gPC representation on an arbitrary grid also allows the investigation of the sensitivity of the blade thickness profiles on the turbine efficiency. The gPC approach is also applied to coupled random parameters. The results show that the most influential coupled random variables are trailing edge tip radius coupled with the angular velocity.

Subcortical brain alterations in major depressive disorder: findings from the ENIGMA Major Depressive Disorder working group

The pattern of structural brain alterations associated with major depressive disorder (MDD) remains unresolved. This is in part due to small sample sizes of neuroimaging studies resulting in limited statistical power, disease heterogeneity and the complex interactions between clinical characteristics and brain morphology. To address this, we meta-analyzed three-dimensional brain magnetic resonance imaging data from 1728 MDD patients and 7199 controls from 15 research samples worldwide, to identify subcortical brain volumes that robustly discriminate MDD patients from healthy controls. Relative to controls, patients had significantly lower hippocampal volumes (Cohen’s d=−0.14, % difference=−1.24). This effect was driven by patients with recurrent MDD (Cohen’s d=−0.17, % difference=−1.44), and we detected no differences between first episode patients and controls. Age of onset ⩽21 was associated with a smaller hippocampus (Cohen’s d=−0.20, % difference=−1.85) and a trend toward smaller amygdala (Cohen’s d=−0.11, % difference=−1.23) and larger lateral ventricles (Cohen’s d=0.12, % difference=5.11). Symptom severity at study inclusion was not associated with any regional brain volumes. Sample characteristics such as mean age, proportion of antidepressant users and proportion of remitted patients, and methodological characteristics did not significantly moderate alterations in brain volumes in MDD. Samples with a higher proportion of antipsychotic medication users showed larger caudate volumes in MDD patients compared with controls. This currently largest worldwide effort to identify subcortical brain alterations showed robust smaller hippocampal volumes in MDD patients, moderated by age of onset and first episode versus recurrent episode status.

Direct mapping of hippocampal surfaces with intrinsic shape context

We propose in this paper a new method for the mapping of hippocampal (HC) surfaces to establish correspondences between points on HC surfaces and enable localized HC shape analysis. A novel geometric feature, the intrinsic shape context, is defined to capture the global characteristics of the HC shapes. Based on this intrinsic feature, an automatic algorithm is developed to detect a set of landmark curves that are stable across population. The direct map between a source and target HC surface is then solved as the minimizer of a harmonic energy function defined on the source surface with landmark constraints. For numerical solutions, we compute the map with the approach of solving partial differential equations on implicit surfaces. The direct mapping method has the following properties: (1) it has the advantage of being automatic; (2) it is invariant to the pose of HC shapes. In our experiments, we apply the direct mapping method to study temporal changes of HC asymmetry in Alzheimer's disease (AD) using HC surfaces from 12 AD patients and 14 normal controls. Our results show that the AD group has a different trend in temporal changes of HC asymmetry than the group of normal controls. We also demonstrate the flexibility of the direct mapping method by applying it to construct spherical maps of HC surfaces. Spherical harmonics (SPHARM) analysis is then applied and it confirms our results on temporal changes of HC asymmetry in AD.