Avaliação em modelos digitais das modificações ocorridas em modelos de gesso em função do posicionamento da moldeira

The objective of this study was to assess if the positioning of the impression tray could cause plaster casts distortion during gypsum setting time. fifteen pairs of master models were cast with alginate impression material and immediately poured with gypsum. impressions were allowed to set with the tray in the not inverted position (group a) or in the inverted position (group b). the plaster models were digitized using a laser scanner (3shape r-700, 3shape a/s). tooth size measurements and distances were obtained using o3d software (widialabs, brasil) measurement tools. data were analyzed by paired t test and linear regression with 5% significance. most measurements of both groups were similar, except for the lower intermolar distance. it was not possible to corroborate the presence of distortions owing to the position of the impression tray during gypsum setting time.

Estabilidade oclusal a longo prazo de Classe II, divisão 1, após tratamento com extração de pré-molares

Patients are looking for esthetic and functional changes when seeking orthodontic treatment and expect the remaining of a stable occlusion. Occlusion stability is one of the goals of the orthodontist; however, dental relationships changes in long-term can occur leading to a relapse of the treatment. Teeth and shape of arches tend to return to the original form, been the retention phase important after the appliance removal, even after several years of post-treatment. This article approaches a submission of a clinical case of Class II division 1 treated with extraction of premolars analyzing its long-term stability.

Extração seriada: considerações clínicas

The early malocclusion treatment has increased interest of orthodontic community. Among these is the serial extraction that harmonizes the differences between the amount of dental material and permanent deficiency of supporting bone. The technique is applied in mixed dentition through a predetermined sequence of extractions between deciduous and permanent teeth, in order to reach spontaneous immediately alignment of remaining permanent teeth with a minimum orthodontic mechanics. It will be reported a case where the serial extraction was performed in a growing patient with biprotrusion, Class I malocclusion and severe crowding. All functional and aesthetics goals were reached.

Confecção e montagem do set-up ortodôntico

Diagnosis and planning stages are critical to the success of orthodontic treatment, in which the orthodontist should have many elements that contribute to the most appropriate decision-making. The orthodontic set-up is an important resource in the planning of corrective orthodontics therapy. It consists of the repositioning of the teeth previously removed from the study dental casts and reassembled on its remaining basis. When properly made, the set-up allows a three-dimensional preview of problems and limitations of the case, assisting in decision-making regarding tooth extractions in cases with problems of space, amount of anchorage loss extent and type of tooth movement, discrepancy of dental arch perimeter, discrepancy of inter-arch tooth volume, among others, indicating the best option for treatment. This paper outlines the most important steps for its confection, an evaluation system and its application in the preparation of orthodontic treatment planning.

Descrição do aparelho VABB (Vertically Activated Bite Block) para o tratamento da mordida aberta anterior

Nowadays, the correction of skeletal vertical dysplasia is considered a great challenge in Orthodontics. The skeletal open bite treatment presents limitations related to vertical growth pattern, the extension of open bite and especially the stability, which is very questioned. The treatment of skeletal open bite is mostly realized by the inhibition of vertical alveolar posterior development (relative intrusion) or absolute intrusion of posterior teeth, through vertical forces, generated by the action of masticatory muscles. The purpose of this article is to present a new appliance for the treatment of skeletal open bite, the VABB (Vertically Activated Bite Block) or modified Bite Block, whose action mechanism is to limit the vertical development of the molars, by the action of facial muscles and two bilateral expansion screws that provide a counterclockwise rotation of the mandible. It will also be presented a clinical case and the technical steps for the construction of this appliance.

Extração de incisivo inferior: uma alternativa no tratamento da classe III

The correction of a Class III malocclusion in adult patients is one of the major challenges in orthodontics due to facial deformities occurring during the unfavorable growth of this kind of pattern, as well as the treatment options capable of producing facial changes aesthetically acceptable and adequate for today's beauty standards. One acceptable alternative treatment is the removal of a lower incisor. For a Class III correction through a lower incisor extraction a thorough analysis and planning must be carried out by taking into consideration the amount of overjet and overbite, periodontal condition of the teeth and the possibility of obtaining a good dental occlusion with acceptable facial aesthetics. Will be presented two case reports of patients presenting an anteroinferior crowding, Class III malocclusion condition. The treatment through a lower incisor extraction and the reasons why this treatment was adopted will be discussed.

Intrusão de incisivos superiores com periodonto comprometido

O tratamento ortodôntico de pacientes periodontalmente comprometidos requer abordagem interdisciplinar que envolva diferentes especialidades odontológicas para que sejam obtidos resultados estéticos e funcionais satisfatórios. Normalmente, pacientes adultos com problemas periodontais apresentam migração dentária, erupção patológica e diastemas. Essas alterações de posição, geralmente, são o resultado da falta de equilíbrio entre o suporte periodontal e as forças oclusais que estão atuando nos dentes durante a mastigação e movimentos funcionais.

Montagem e confecção do set up ortodôntico

Diagnosis and planning stages are critical to the success of orthodontic treatment, in which the orthodontist should have many elements that contribute to the most appropriate decision-making. The orthodontic set-up is an important resource in the planning of corrective orthodontics therapy. It consists of the repositioning of the teeth previously removed from the study dental casts and reassembled on its remaining basis. When properly made, the set-up allows a three-dimensional preview of problems and limitations of the case, assisting in decision-making regarding tooth extractions in cases with problems of space, amount of anchorage loss extent and type of tooth movement, discrepancy of dental arch perimeter, discrepancy of inter-arch tooth volume, among others, indicating the best option for treatment. This paper outlines the most important steps for its confection, an evaluation system and its application in the preparation of orthodontic treatment planning.

Necessidade de ancoragem do grupo A e o controle biomecanico da mola T pré-ativada por curvatura para o fechamento de espacos

Contemporary orthodontics has sought, beyond the esthetic, occlusal and functional goals, treatments even faster and with less visits to the orthodontist — especially in patients that require dental extractions in which the generated space becomes a nuisance. The segmented arch technic (SAT), by the use of a "T" loop spring, has provided such results within these requirements. Therefore, this study aimed to appraise and demonstrate the confection, activation and biomechanical control of "T" loop spring, in the group with high anchorage necessity (group A), for retraction of anterior teeth; as well as to present a case report, with high anterior retraction necessity, treated with "T" loop spring.

Hipomineralização Molar Incisivo (HMI): avaliação clínica e microscópica

This study aimed to evaluate the clinical and microscopic changes of MIH, and compare them to areas of healthy dental enamel. Methodology: epoxy resin replicas of healthy incisors and affected by MIH were evaluated qualitatively by scanning electron microscopy (SEM) photographs. Results: Clinically it was observed that MIH incisors showed changes in color and surface, with significant structural losses. By SEM, these had irregular surfaces and margins with structural losses. Conclusions: The teeth affected by HMI have clinical and morphological characteristics that are important for the definition of patient's treatment plan.

Innovation in pediatric surgery: the use of ultrasonic CVD tips: case report

The non-eruption of teeth due to highly keratinized gingival mucosa is a frequent event in the pediatric dentistry, which harms the oral aesthetics and function. A surgical excision of the involved area is indicated, exposing the non-erupted tooth. This procedure involves anesthesia and cutting instruments that may increase the fear and anxiety in young patients. The use of new technologies has avoided these instruments and has promoted more comfort to the patients. This study presents clinical cases in which gingivectomy was performed using the innovative method with an ultrasound-activated CVD tip. It was concluded that this method presented effectiveness, promoted more comfort, and less fear to the patients, making its use a viable alternative to pediatric surgery.

Tratamento cirúrgico de canino incluso em mento: relato de caso

The mandibular and maxillary canines when well positioned in the arch, are important functionally and aesthetically. Although these teeth are frequently malpositioned in the dental arch, their absence of eruption are not common, occuring more frequently with the maxillary canine than the mandibular canine. The canine transmigration is a well-known pre eruptive phenomenon in which the tooth goes thru the facial midline, occurring more frequently in the mandible than in maxila. Females are more susceptible than males and the right side more than the left one. Normally the patients do not show any symptoms, and this condition is observed during radiographic exams to diagnose the late exfoliation of the deciduous canine or for any other purpose. Due to the relationship between impacted canines and pathologic lesions, infection, trauma to the adjacent teeth, pain, ectopic eruption and interference with prosthesis, it´s indicated the surgical extraction of these teeth. The goal of this article is to describe and discuss the surgical treatment of an impacted canine (43) in the chin.

Morphology and adhesion on blood components in root surfaces treated by a piezoelectric ultrasonic: an in vitro study

The aim of this study was to evaluate the morphology and adhesion of blood components on root surfaces instrumented with piezoelectric ultrasonic Piezon Master Surgery. Methods 10 teeth were used in this study. The teeth had their proximal divided into four areas that received different treatments: Group 1: untreated control Group 2: scaling with manual instrument; Group 3: scaling with ultrasound; Group 4: Scaling with manual instruments and ultrasound. We obtained 20 samples, 10 of which were used to analyze the morphology and the other 10 were used for analysis of adhesion of blood components. The specimens were analyzed by scanning electron microscopy. Photomicrographs were analyzed by the scores of adhesion of blood components and the index of root morphology. The results were statistically by the Kruskall-Wallis and Mann-Whitney with a significance level of 95%. Results The morphological analysis showed that the Group 1 had a surface unchanged in relation to other groups (Group 1 X Group 2 = 0.0025; Group 1 X Group 3 = 0.0003; Group 1 X Group 4 = 0.0003) and Group 2 presented a smoother surface compared to Group 1 and groups instrumented with ultrasound (Group 2 X Group 3 = 0.0025; Group 2 X Group 4 = 0.0025) there were no statistical differences between the Groups 3 and 4. analysis of adhesion of blood components showed that the Groups 2, 3 and 4 had no statistically significant differences between themselves, but more biocompatible surfaces promoted the surface untreated control (Group 1 X Group 2 = 0.02; Group 1 X Group 3 = 0.04; Group 1 X Group 4 = 0.005). Conclusion The instrumentation with piezoelectric ultrasonic promoted an irregular root surface, but did not negatively affect the adhesion of blood components.

Uso de um distrator ósseo dentoimplantossuportado, feito a partir de tornos expansores convencionais, na reabilitação oral

Osteodistraction is a clinical reality, available in the last decades for the resolution of large bone deficiencies, in cases that there are pre-existing, but misplaced implants and teeth. The aims of thearticle is to present a case report in which a new possibility for bone distraction, based on tooth-implant bone distractors, made from standard orthodontic expansion-screws, was used in an area where there was an extensive need of alveolar bone and aesthetical recovery, allied to teeth and dental implant misplacement. This technique presented good clinical results, associated to effective simplicity and low cost, becoming viable clinical solution for bone tissue augmentation and aesthetical optimization. In resume, it is possible to say that the suggested technique achieved its objectives, improving the hard and soft tissue profile, whilst allowing completion of oral rehabilitation.

Efeito do ângulo de trabalho do ultrassom e do jato de bicarbonato sobre as superfícies ranculares

The aim of this study was to evaluate the effect of the working angle variation of the magnetoestritive ultrasonic (MU) and air polishing devices (APD) on the roughness and wear of dental root. Fifty bovine incisive teeth were used in this study. The proximal surfaces of the teeth were divided in three regions: coronal, median, and an apical. The coronal region was treated with a manual scaler, the apical region was treated with APD or with a MU and the medium region was maintained untreated to serve as a control. The teeth were divided in 11 groups according to the treatment applied: MU-0º; MU-30º; MU-45º; MU-60º; MU-90º; AP-0º; AP-30º; AP-45º; AP-60º; AP-90º; MS: manual scaler. To the statistical analysis, data submitted to the Anova and Tukey's test (p < 0.05). The manual curette promotes less roughness and higher tooth wear in comparison with the both ultrasonic and air polishing devices (p < 0.05). The angles of 45º, 60º and 90º caused higher rate of tooth wear and roughness when the MU was used (p < 0.05), while the angle of 90° caused a higher tooth wear than the angle of 30° when the APD was used (p < 0.05). The working angle variation influenced the tooth wear and roughness promoted by MU, whereas when using APD, the working angle variation influenced only the tooth wear.