A New Modified Expanding Cavity Model for Characterizing the Spherical Indentation Behaviour of Bulk Metallic Glass with Pile-up

Spherical nanoindentation tests were performed on Zr41.2Ti13.8Cu12.5Ni10Be22.5 bulk metallic glass and pile-ups were observed around the indenter. A new modified expanding cavity model was developed to characterize the indentation deformation behavior of strain-hardening and pressure-dependent materials. By using this model, the representative stress-strain response of this bulk metallic glass to hardness and indentation in the elastic-plastic regime were obtained taking into consideration the effect of pile-up.

Molecular Dynamics Simulation of Thermal and Mechanical Properties of Polyimide-Carbon-Nanotube Composites

An aromatic polyimide and its mixture with randomly distributed carbon nanotubes (NTs) are simulated by using molecular dynamics, repeated energy minimization and cooling processes. The glass transition temperatures are identified through volume-temperature curves. Stress-strain curves, Young's moduli, densities and Poisson ratios are computed at different temperatures. It is demonstrated that the carbon NT reduces the softening effects of temperature on mechanical properties and increases the ability to resist deformation.

Impossibilità di pensare Dio non esistente : il Proslogion di Anselmo d'Aosta come applicazione implicita dei moderni procedimenti di logica aletica

Resumen: La vera intenzione teologica di Anselmo d���Aosta nello scrivere il Proslogion e il vero significato del suo celebre unum argumentum vanno visti nella funzione che la ragione svolge necessariamente all’interno della vita di fede del cristiano. Anselmo, come Tommaso d���Aquino, non sostiene che l’esistenza di Dio sia un “articulus fidei” ma piuttosto uno dei “praeambula fidei”. La ragione naturale ha la certezza che Dio esiste, ancora prima della dimostrazione metafisica, e questo non fa che confermare l’assurdità di pensare che non esista il fondamento reale di tutte le cose esistenti.

El Conde de Portugal D. Henrique : ambición y lealtad

Resumen: La presente investigación reivindica la persona de D. Henrique de Borgoña, padre del primer rey de Portugal, como inspirador de la política separatista que hizo del condado portugalense un reino reconocido de la Europa cristiana. Igualmente se pone de relieve la importancia del parentesco y relaciones familiares para conseguir ese éxito diplomático.

Les attributs et contextes d'utilisation du travail collaboratif

Résumé: Le travail collaboratif s’invite à présent partout, et est identifié dans des domaines aussi multiples que variés. Dans le monde de l’entreprise, de la prise en charge médico-sociale, de l’éducation / formation, de la recherche, de l’économie, de la politique, de la gestion de carrière… etc. Ce travail vise dans un premier temps à d��cliner ce qu’est la collaboration, ses caractéristiques, ses contextes d���utilisation, et la façon dont elle se différencie des autres formes d���organisation (coopération et compétition notamment). Dans un deuxième temps, il réexamine la question de la nouveauté du travail collaboratif à la lumière des résultats obtenus. S’il est assez évident que les « ingrédients », les attributs du travail collaboratif ne sont pas nouveaux (le d��veloppement informatique mis à part), il semble en revanche que les combinaisons rencontrées et les domaines d���application génèrent de nouvelles questions. Pour finir, en s’inspirant des termes associés à collaboration, il consid��re quelques-uns des nouveaux enjeux dans la sphère professionnelle.

Effect of Carbon Addition on Microstructure and Mechanical Properties of Ti-Based Bulk Metallic Glass Forming Alloys

A kind of novel Ti-based composites was developed by introducing different amounts of carbon element to the Ti-50 Cu-23 Ni-20 Sn-7 bulk metallic glass forming alloys. The thermal stability and microstructural evolution of the composites were investigated. Room temperature compression tests reveal that the composite samples with 1% and 3% (mass fraction) carbon additions have higher fracture strength and obvious plastic strain of 2 195 MPa, 3.1% and 1 913 MPa, 1.3% respectively, compared with those of the corresponding carbon-free Ti-50 Ni-20 Cu-23 Sn-7 alloys. The deformation mechanisms of the composites with improved mechanical properties were also discussed.

Phase Evolution and its Effect on Magnetic Properties of Nd60Al10Fe20Co10 Bulk Metallic Glass

The thermal stability of nanocrystalline clusters, the phase evolution, and their effects on magnetic Propertieswere studied for as-cast Nd60Al10Fe20Co10 alloy using differential scanning calorimetry curves, x-ray diffraction patterns, scanning electron microscopy, and high-resolution transition electron microscopy. Thermomagnetic curves and hysteresis loops of the bulk metallic glass were measured during the annealing process. The high thermostability of the hardmagnetic properties of the samples observed is attributed to the stability of the nanocrystalline clusters upon annealing, while the slight enhancement in the magnetization is due to the precipitation of some Nd-rich metastable phases. The mechanism of thermostability of the nanocrystalline clusters and the formation of the metastable phases are discussed.

Material properties and tribological performance of rf-PECVD deposited DLC coatings

Diamond-like carbon (DLC) coatings were deposited on to silicon, glass and metal substrates, using an rf-plasma enhanced chemical vapour deposition (rf-PECVD) process. The resultant film properties were evaluated in respect of material and interfacial property control, based on bias voltage variation and the introduction of inert (He and Ar) and reactive (N2) diluting gases in a CH4 plasma. The analysis techniques used to assess the material properties of the films included AFM, EELS, RBS/ERDA, spectroscopic, electrical, stress, microhardness, and adhesion. These were correlated to the tribological performance of the coatings using wear measurements. The most important observation is that He dilution (>90%) promotes enhanced adhesion with respect to all substrate material studies. Coatings typically exhibit a microhardness of the order of 10-20 GPa in films 0.1<d<2 μm thick, with associated electrical resistivity in the range 108<ρ<1012Ω.cm, coefficient of fricton <0.1 and surface RMS roughness as low as 2Å. The results are discussed with respect to surface pre-treatment, ion surface bombardment, interfacial reactivity and changes in plasma gas breakdown processes. | Diamond-like carbon (DLC) coatings were deposited on to silicon, glass and metal substrates, using an rf-plasma enhanced chemical vapour deposition (rf-PECVD) process. The resultant film properties were evaluated in respect of material and interfacial property control, based on bias voltage variation and the introduction of inert (He and Ar) and reactive (N2) diluting gases in a CH4 plasma. The analysis techniques used to assess the material properties of the films included AFM, EELS, RBS/ERDA, spectroscopic, electrical, stress, microhardness, and adhesion. These were correlated to the tribological performance of the coatings using wear measurements. The most important observation is that He dilution (>90%) promotes enhanced adhesion with respect to all substrate materials studied. Coatings typically exhibit a microhardness of the order of 10-20 GPa in films 0.1 < d < 2 μm thick, with associated electrical resistivity in the range 108 < ρ < 1012 Ω·cm, coefficient of friction <0.1 and surface RMS roughness as low as 2 A. The results are discussed with respect to surface pre-treatment, ion surface bombardment, interfacial reactivity and changes in plasma gas breakdown processes.

Field of view expansion for 3-D holographic display using a single spatial light modulator with scanning reconstruction light

Increasing the field of view of a holographic display while maintaining adequate image size is a difficult task. To address this problem, we designed a system that tessellates several sub-holograms into one large hologram at the output. The sub-holograms we generate is similar to a kinoform but without the paraxial approximation during computation. The sub-holograms are loaded onto a single spatial light modulator consecutively and relayed to the appropriate position at the output through a combination of optics and scanning reconstruction light. We will review the method of computer generated hologram and describe the working principles of our system. Results from our proof-of-concept system are shown to have an improved field of view and reconstructed image size. ©2009 IEEE.

Melting and Crystallization of Nd60Al10Fe20Co10 Bulk Metallic Glass under High Pressure

Crystallization, melting and structural evolution upon crystallization in Nd60Al10Fe20Co10 bulk metallic glass (BMG) are in situ investigated by x-ray diffraction with synchrotron radiation under high pressure. It is found that the crystallization is pressure promoted, while themelting is inhibited. The crystallization and melting process are also changed under high pressure. The features of the crystallization and melting under high pressure are discussed.

El acompañamiento espiritual como práctica eclesial : apuntes a partir del pensamiento de H-J. Gagey, D. Tracy e I. Baumgartner

Resumen: En este texto la autora retoma algunas afirmaciones sobre teología práctica que hacen tres autores contemporáneos: Henri-Jerôme Gagey, David Tracy e I. Baumgartner. Se propone observar cómo esas afirmaciones arrojan luz sobre el acompañamiento espiritual como práctica eclesial. Finalmente, hace una breve reflexión en orden a la continuidad en el estudio del tema.