Widespread environmental contamination with Mycobacterium tuberculosis complex revealed by a molecular detection protocol

Environmental contamination with Mycobacterium tuberculosis complex (MTC) has been considered crucial for bovine tuberculosis persistence in multi-host-pathogen systems. However, MTC contamination has been difficult to detect due to methodological issues. In an attempt to overcome this limitation we developed an improved protocol for the detection of MTC DNA. MTC DNA concentration was estimated by the Most Probable Number (MPN) method. Making use of this protocol we showed that MTC contamination is widespread in different types of environmental samples from the Iberian Peninsula, which supports indirect transmission as a contributing mechanism for the maintenance of bovine tuberculosis in this multi-host-pathogen system. The proportion of MTC DNA positive samples was higher in the bovine tuberculosis-infected than in presumed negative area (0.32 and 0.18, respectively). Detection varied with the type of environmental sample and was more frequent in sediment from dams and less frequent in water also from dams (0.22 and 0.05, respectively). The proportion of MTC-positive samples was significantly higher in spring (p<0.001), but MTC DNA concentration per sample was higher in autumn and lower in summer. The average MTC DNA concentration in positive samples was 0.82 MPN/g (CI95 0.70-0.98 MPN/g). We were further able to amplify a DNA sequence specific of Mycobacterium bovis/caprae in 4 environmental samples from the bTB-infected area.

Performance assessment of electrically small antennas for implantable microsystems with wireless power and communications

Dissertação de mestrado integrado em Engenharia Biomédica (área de especialização em Eletrónica Médica)

Ionic, paramagnetic and photophysical properties of a new biohybrid material incorporating copper perchlorate

The sol-gel method was employed in the synthesis of di-urethane cross-linked poly(-caprolactone) (d-PCL(530)/siloxane biohybrid ormolytes incorporating copper perchlorate, (Cu(ClO4)2). The highest ionic conductivity of the d PCL(530)/siloxanenCu(ClO4)2 system is that with n = 10 (1.4 x 10-7 and 1.4 x 10-5 S cm-1, at 25 and 100 ºC, respectively). In an attempt to understand the ionic conductivity/ionic association relationship, we decide to inspect the chemical environment experienced by the Cu2+ ions in the d-PCL(530)/siloxane medium. The observed EPR spectra are typical of isolated monomeric Cu2+ ions in axially distorted sites. The molecular orbital coefficients obtained from the EPR spin Hamiltonian parameters and the optical absorption band suggests that bonding between the Cu2+ and its ligand in the ormolytes are moderately ionic. Investigation by photoluminescence spectroscopy did not evidence or allow selective excitation of transitions corresponding to complexed Cu2+ species.

Ureasilicate hybrid coatings for corrosion protection of galvanized steel in chloride-contaminated simulated concrete pore solution

Organic-inorganic hybrid (OIH) sol-gel coatings based on ureasilicates (U(X)) have promising properties for use as eco-friendly coatings on hot dip galvanized steel (HDGS) and may be considered potential substitutes for pre-treatment systems containing Cr(VI). These OIH coatings reduce corrosion activity during the initial stages of contact of the HDGS samples with highly alkaline environments (cementitious media) and allow the mitigation of harmful effects of an initial excessive reaction between cement pastes and the zinc layer. However, the behavior of HDGS coated with U(X) in the presence of chloride ions has never been reported. In this paper, the performance of HDGS coated with five different U(X) coatings was assessed by electrochemical measurements in chloride-contaminated simulated concrete pore solution (SCPS). U(X) sol-gel coatings were produced and deposited on HDGS by a dip coating method. The coatings performance was evaluated by electrochemical impedance spectroscopy, potentiodynamic polarization curves measurements, macrocell current density and polarization resistance in contact with chloride-contaminated SCPS. The SEM/EDS analyses of the coatings before and after the tests were also performed. The results showed that the HDGS samples coated with the OIH coatings exhibited enhanced corrosion resistance to chloride ions when compared to uncoated galvanized steel.

Measurements of the top quark branching ratios into channels with leptons and quarks with the ATLAS detector

A measurement of the inclusive cross section for top quark pair production in pp collisions using events with an isolated lepton (muon or electron) and a τ lepton decaying to hadrons (τhad) is reported. Measurements of the branching ratios of top quark decays into leptons and jets using events with tt¯ (top antitop) pairs are also reported. Events were recorded with the ATLAS detector at the LHC in pp collisions at a center-of-mass energy of 7 TeV. The collected data sample corresponds to an integrated luminosity of 4.6 fb−1. The inclusive cross section measured using events with an isolated lepton and a τhad is σtt¯=183±9(stat.)±23(syst.)±3(lumi.)pb. The measured top quark branching ratios agree with the Standard Model predictions within the measurement uncertainties of a few percent.

Propolis: A complex natural product with a plethora of biological activities that can be explored for drug development

The health industry has always used natural products as a rich, promising, and alternative source of drugs that are used in the health system. Propolis, a natural resinous product known for centuries, is a complex product obtained by honey bees from substances collected from parts of different plants, buds, and exudates in different geographic areas. Propolis has been attracting scientific attention since it has many biological and pharmacological properties, which are related to its chemical composition. Several in vitro and in vivo studies have been performed to characterize and understand the diverse bioactivities of propolis and its isolated compounds, as well as to evaluate and validate its potential. Yet, there is a lack of information concerning clinical effectiveness. The goal of this review is to discuss the potential of propolis for the development of new drugs by presenting published data concerning the chemical composition and the biological properties of this natural compound from different geographic origins.

Cognitive processes affect the gait of subjects with Parkinson’s and Alzheimer’s disease in dual tasks

Objective To investigate the relation between gait parameters and cognitive impairments in subjects with Parkinson’s disease (PD) and Alzheimer’s disease (AD) during the performance of dual tasks. Methods This was a cross-sectional study involving 126 subjects divided into three groups: Parkinson group (n = 43), Alzheimer group (n = 38), and control group (n = 45). The subjects were evaluated using the Timed Up and Go test administered with motor and cognitive distracters. Gait analyses consisted of cadence and speed measurements, with cognitive functions being assessed by the Brief Cognitive Screening Battery and the Clock Drawing Test. Statistical procedures included mixed-design analyses of variance to observe the gait patterns between groups and tasks and the linear regression model to investigate the influence of cognitive functions in this process. A 5% significant level was adopted. Results Regarding the subjects’ speed, the data show a significant difference between group vs task interaction (p = 0.009), with worse performance of subjects with PD in motor dual task and of subjects with AD in cognitive dual task. With respect to cadence, no statistical differences was seen between group vs task interaction (p = 0.105), showing low interference of the clinical conditions on such parameter. The linear regression model showed that up to 45.79%, of the variance in gait can be explained by the interference of cognitive processes. Conclusion Dual task activities affect gait pattern in subjects with PD and AD. Differences between groups reflect peculiarities of each disease and show a direct interference of cognitive processes on complex tasks.

A modular traffic sampling architecture for flexible network measurements

Dissertação de Mestrado (Programa Doutoral em Informática)

Normal values of echocardiographic measurements. A population-based study

OBJECTIVE: To describe echocardiographic measurements and left ventricular mass in a population sample of healthy adults inhabitants of the urban region of Porto Alegre. METHODS: An analytical, observational, population-based, cross-sectional study was done. Through a multi-stage probability sample, 114 individuals were selected to be submitted to a M-mode and two-dimensional echocardiogram with color Doppler. The analyses were restricted to healthy participants. Echocardiographic measurements were described by mean, standard deviation, 95 percentile and 95% confidence limits. RESULTS: A total of 100 healthy participants, with several characteristics similar to those from the original population, had a complete and reliable echocardiographic examination. The measurements of aorta, left atrium, interventricular septum, left ventricle in systole and diastole, left posterior wall and left ventricular mass, adjusted or not for body surface area or height, were significantly higher in males. The right ventricle size was similar among the genders. Several echocardiographic measurements were within standard normal limits. Interventricular septum, left posterior wall and left ventricular mass, adjusted or not for anthropometric measurements, and aortic dimensions had lower mean and range than the reference limits. CONCLUSION: The means and estimates of distribution for the measurements of interventricular septum, left posterior wall and left ventricular mass found in this survey were lower than those indicated by the international literature and accepted as normal limits.

Beeswax organogels: Influence of gelator concentration and oil type in the gelation process

This work focused on how different types of oil phase, MCT (medium chain triglycerides) and LCT (long chain triglycerides), exert influence on the gelation process of beeswax and thus properties of the organogel produced thereof. Organogels were produced at different temperatures and qualitative phase diagrams were constructed to identify and classify the type of structure formed at various compositions. The microstructure of gelator crystals was studied by polarized light microscopy. Melting and crystallization were characterized by differential scanning calorimetry and rheology (flow and small amplitude oscillatory measurements) to understand organogels' behaviour under different mechanical and thermal conditions. FTIR analysis was employed for a further understanding of oil-gelator chemical interactions. Results showed that the increase of beeswax concentration led to higher values of storage and loss moduli (G, G) and complex modulus (G*) of organogels, which is associated to the strong network formed between the crystalline gelator structure and the oil phase. Crystallization occurred in two steps (well evidenced for higher concentrations of gelator) during temperature decreasing. Thermal analysis showed the occurrence of hysteresis between melting and crystallization. Small angle X-ray scattering (SAXS) analysis allowed a better understanding in terms of how crystal conformations were disposed for each type of organogel. The structuring process supported by medium or long-chain triglycerides oils was an important exploit to apprehend the impact of different carbon chain-size on the gelation process and on gels' properties.

A multi–physics approach applied to masonry structures with non–hydraulic lime mortars

Tese de Doutoramento em Engenharia Civil (área de especialização em Engenharia de Estruturas).

Técnicas Experimentales para Caracterizar Flujos Complejos. Experimental techniques for complex flows characterization.

En ambientes fluviales, la interacción del flujo con la geometría del cauce y con los sedimentos del lecho define una dinámica turbulenta compleja en permanente evolución. El nivel de complejidad del flujo aumenta ante la presencia de estructuras hidráulicas (pilas de puentes, protecciones contra erosión, etc.). La mayoría de los ríos, o canales naturales, presentan confluencias y bifurcaciones, en donde se genera una convergencia (o divergencia) del flujo con el resultado de un ambiente hidrodinámico complejo en la cercanía de las uniones (Kenworthy y Rhoads 1995). Bajo estas condiciones no es posible extrapolar las soluciones tradicionales básicas de las ecuaciones de gobierno desarrolladas para canales rectos y uniformes. Algunas investigaciones experimentales realizadas en estos sistemas son las de Best (1988), Rhoads y Sukhodolov (2001), Richardson et al. (1996); Richardson y Thorne (1998, 2001); Parsons et al. (2004); Szupiany et al. (2005).Por otro lado, la zona costera en ambientes marítimos se caracteriza por la existencia de diversos procesos dinámicos, entre los que se destacan la acción de olas, corrientes, interacción olas-corrientes, transporte de sedimentos y cambios batimétricos. Estos se manifiestan en una alteración morfodinámica de la playa generando superficies potenciales de erosión. Así, el diseño de las protecciones costeras (ya sean continuas, como escolleras o muros verticales; o discontinuas como espigones o diques externos) sometidas al clima marítimo bajo distintas condiciones de olas y mareas, alteran los patrones de circulación y de transporte afectando la morfodinámica en su zona de influencia y plantean, por ejemplo, la necesidad de ajustes de los coeficientes de estabilidad y pesos de los bloques de roca de las escolleras. Los problemas generados, son especialmente complejos ya que deben considerarse para su estudio, los niveles de turbulencia, la transmisión del oleaje sobre o a través de la estructura, difracción alrededor de la misma, refracción y shoaling sobre un fondo dinámico, reflexión en la estructura, etc. (Alsina et al., 2007) Revisiones bibliográficas previas muestran que, en ambos ambientes (fluvial y marítimo), es necesario optimizar las técnicas experimentales existentes para que ellas permitan caracterizar con precisión los flujos turbulentos complejos presentes. El objetivo general propuesto en esta investigación es contribuir a mejorar el conocimiento de los procesos hidrodinámicos de flujos turbulentos naturales con y sin la presencia de estructuras hidráulicas que den lugar a formaciones complejas (3D). Para alcanzar este objetivo se propone realizar una recopilación de antecedentes y un análisis crítico detallado de los equipos de ultima generación para mediciones de flujo con alta frecuencia y resolución disponibles en el Laboratorio de Hidráulica (LH) de la Universidad Nacional de Córdoba (UNC): ADV 3D (Acoustic Doppler Velocimeter de Sontek) y laser PIV 2D (Particle Image Velocimeter de Dantec). A estos equipamientos se le agrega un moderno equipo de generación bidimensional de oleaje con absorción dinámica (adquiridos a HR Ltd. en 2007 por el CAI 085 del FONTAR). Finalmente se prevé utilizar este equipamiento durante el desarrollo de experimentos y mediciones los cuales se realizarán sobre modelos físicos fluviales y costeros diseñados y construidos con y sin estructuras que interactúen con flujo turbulentos complejos. Los resultados obtenidos en este proyecto permitirá alcanzar una mejor comprensión de los procesos hidrodinámicos de los flujos turbulentos complejos, lo cual es necesario y de gran utilidad para realizar un manejo apropiado de los ambientes fluviales y marítimos, teniendo como campo directo de aplicación el correcto diseño de estructuras hidráulicas, asistiendo a la toma de medidas correctivas en sistemas naturales sometidos a procesos erosivos o de sedimentación, y contribuyendo de esta forma al manejo ambientalmente sustentable de los recursos.

Dinámica Cuántica de Sistemas Complejos: Fundamentos y Aplicaciones. Quantum Dynamics in Complex Systems: Fundamentals and Aplications.

El procedimiento de revertir la dinámica colectiva (diablillo de Loschmidt apresurado) mediante un pulso de radio frecuencia, permite generar un Eco de Loschmidt, es decir la refocalización de una excitación localizada. Alternativamente, en acústica es posible implementar un Espejo de Reversión Temporal, que consiste en la progresiva inyección de una débil excitación ultrasónica en la periferia de un sistema, para construir una excitación que se propaga "hacia atrás". Así, podemos afirmar que es posible revertir y controlar la dinámica. Sin embargo, aún no se posee una comprensión detallada de los mecanismos que gobiernan estos procedimientos. Este proyecto busca responder las preguntas que posibilitan esta comprensión.

Procesos oxidativos en matrices alimentarias complejas. Oxidative processes in complex food matrices.

Las reacciones bioquímicas que ocurren como consecuencia del tratamiento y almacenamiento de los alimentos, mejoran la seguridad alimentaria, las propiedades sensoriales y la vida útil. Sin embargo, el tratamiento térmico, la exposición a la luz y el oxígeno pueden causar daño oxidativo a los lípidos y proteínas. Los procesos oxidativos de matrices complejas tienen características distintivas que no se manifiestan cuando los componentes son sometidos a oxidación individualmente. La hipótesis de trabajo es que la oxidación de proteínas en matrices alimentarias complejas altera la estructura y las propiedades funcionales de las proteínas y, que las modificaciones que se producen varían según las condiciones de procesamiento y de la composición química del alimento. Nuestros estudios intentan demostrar que el estado oxidativo de las proteínas de un alimento es un parámetro importante para la evaluación de las propiedades funcionales, sensoriales y nutricionales de un producto lácteo. El objetivo general del proyecto es el estudio de los procesos de oxidación de matrices alimentarias complejas (la leche, miel) y su relación con distintos procesos y materiales utilizados en la industria. Es decir, nos proponemos estudiar las consecuencias funcionales y biológicas (calidad nutricional, coagulación) de la oxidación proteica en modelos experimentales “in vitro” y en productos comerciales. 1. Estudiar los fenómenos de peroxidación proteica en leche entera y descremada sometida a los distintos procesos tecnológicos de la producción de leche y queso a escala laboratorio. Se realizarán las mismas experiencias con albúmina sérica y con proteínas aisladas de suero de leche para comparar diferencias entre una matriz compleja y una simple. 2. Determinar la relación entre oxidación y composición proteica de la leche, y los cambios en las fracciones proteicas aisladas (caseínas y beta-lactoglobulina). 3. Analizar el impacto de los procesos tecnológicos a nivel de producción primaria (composición proteica y estado de oxidación) en los indicadores de inflamación (contenido de células somáticas y proteína C Reactiva) y de estado redox (capacidad antioxidante de los productos lácteos y nivel de carbonilos de proteinas). 4. Comparar las características de composición química y el estado de oxidación de leche provenientes de las tres regiones (Buenos Aires, Santa Fe y Córdoba) que conforman la cuenca láctea Argentina. Este objetivo se realizará conjuntamente con los integrantes de nuestro grupo de investigación que trabajan en el Laboratorio de Control de Calidad de la Escuela Superior de Lechería. 5. Determinar los metabolitos secundarios de mieles uniflorales propuestos como responsables de la capacidad antioxidante de estas (polifenoles) y como indicadores de su origen botánico. 6. Valorar la capacidad antioxidante total de mieles uniflorales. 7. Validar los métodos analíticos y semicuantitativos utilizados y a utilizar en el presente proyecto teniendo en cuenta lo efectos de matrices típico de los fluidos biológicos y las mezclas. El estudio de las modificaciones oxidativas de matrices complejas es un tema que es importante tanto desde el punto de vista del conocimiento básico como del aplicado. Nosotros creemos que el presente proyecto aportará conocimiento sobre las características de las vías oxidativas de proteínas en matrices complejas y que podrá ser utilizado para diseñar estrategias productivas tendientes a disminuir el deterioro de la calidad de la leche debido a la exposición a energía radiante. Parte de la experiencia ganada por el grupo ha sido ya volcada a subsanar dificultades y problemas de oxidación y deterioro de la calidad de alimentos. Además, se contribuirá a discernir la paradoja que existe en el área sobre las propiedades oxidantes/antioxidantes de los polifenoles y la relación entre estas y el estado oxidativo de un alimento. The biochemical reactions that occur as a result of food treatment and storage, improve food security, sensory properties and shelf life. Heat treatment, exposure to light and oxygen can cause oxidative damage to lipids and proteins. Oxidative processes in complex matrices display distinctive features that do not appear when the components are individually subjected to oxidation. The hypothesis is that protein oxidation in complex food matrices alters the structure and functional properties of proteins and that the modifications vary according to process conditions and food composition. The main goal is to study oxidation of complex food matrices (milk, honey) with different processes and materials used in the industry. The specific aims are: 1. To study protein oxidation in whole milk and skim subject to various technological processes. The same experiences will be done with serum albumin and isolated whey proteins to compare complex and simple matrices. 2. To determine the relationship between oxidation and milk protein composition, and changes in casein and beta-lactoglobulin. 3. Analyze the impact of technological processes at the level of primary production on markers of inflammation and redox (antioxidant capacity and protein carbonyls). 4. Compare characteristics of chemical composition and oxidation state of milk. 5. Determine secondary metabolites of honey responsible for the antioxidant capacity of these. 6. To evaluate the total antioxidant capacity unifloral honey. This project will provide knowledge about characteristics of oxidative pathways of proteins in complex matrices that can be used to design production strategies aimed at reduce the deterioration of milk quality. Also, it would help to discern the paradox that exists on the oxidants/antioxidants properties of polyphenols and the relationship between these and the oxidative status of a food.

Analysis of the Atmosphere Aerosol and Ozone Condition Over Tbilisi Using Satellite Data and Ground Truth Measurements

Ground-based measurements of the parameters of atmosphere in Tbilisi during the same period, which are provided by the Mikheil Nodia Institute of geophysics, were used as calibration data. Satellite data monthly averaging, preprocessing, analysis and visualization was performed using Giovanni web-based application. Maps of trends and periodic components of the atmosphere aerosol optical thickness and ozone concentration over the study area were calculated.