Trace metals -- a potential threat to our fishing industry

Trace metals constitute a major form of water pollutant that can adversely affect fish production. The potentially toxic metals have been identified as lead, zinc, copper, arsenic, antimony, mercury beryllium, barium, cadmium, chromium, nickel, selenium among others. Preliminary laboratory studies have been directed to the determination of traces of lead in the aquatic biota and its toxicity. There are indications that the levels reported in effluents from some of the industries may be above the tolerant limits of local fish species and organisms that make up their food. Metal pollution could become a serious problem to freshwater fisheries in the future as a result of increasing urbanization and industrialization, unless efforts are made to prevent it

Artisanal canoe fishing industry of the Rivers State: its economic viability and investment potentials

Consequent upon the present national call in Nigeria for all to go back to agriculture including fishing, most retrenched workers and unemployed youths from the riverine areas are taking up fishing as a legitimate and gainful livelihood. To sustain this tempo and attract more investment, the economic viability of such projects must be known. This study is an attempt to document the profitability and investment potential of artisanal canoe fishing. Socio-economic information including catches, operational cost and returns were obtained through a personal interview questionnaire survey of 240 randomly selected artisanal canoe fishermen from Bonny, Brass and Degema Local Government Areas (LGA) of the State and analyzed. With an investment cost of about 8,135, 8,490 and 6,571 and operation cost of 750, 776 and 627, the analysis showed an average monthly gross income of 1,869, 3,221 and 1,775 for the three local government areas respectively. A benefit-cost-ratio of 1:8, net present value of 400, 603 and internal rate of return greater than 50% were obtained. Since capital invested in fisheries is not tied up for long before benefits start flowing, coupled with the high IRR, it is concluded that artisanal canoe fishing would be an economically viable venture if well managed

An economic overview of the fish and shrimp production of the Nigeria fish trawling industry under the structural adjustment programme

Over the years, Nigeria have witnessed different government with different policy measures. Against the negative consequences of the past policies, the structural adjustment was initiated in 1986. Its aims is to effectively altar and restructure the consumption patterns of the economy as well as to eliminate price distortions and heavy dependence on the oil and the imports of consumer goods and services. Within the period of implementation, there has been a decreasing trend in yearly fish catch landings and sizes but the reverse in shrimping. There is also a gradual shift from fishing to shrimping, from the vessels purchased with 83.3% increase of shrimpers from 1985 to 1989. Decreasing fish catch sizes and quantity aggravated by the present high cost of fishing coupled with the favourable export market for Nigeria shrimp tend to influence the sift. This economic situation is the result of the supply measures of SAP through the devaluation of the Naira. There is also overconcentration of vessels on the inshore waters as majority of the vessels are old and low powers hence incapable of fishing on the deep sea. Rotterdam price being paid for automotive gas oil (AGO) by fishing industries is observed to be discriminating and unhealthy to the growth of the industry as it is exceedingly high and unstable thus affecting planning for fishing operation. Fuel alone takes 43% of the total cost of operation. The overall consequences is that fishing days are loss and therefore higher overhead cost. It was concluded that for a healthy growth and sustainable resources of our marine fishery under the structural adjustment programme licensing of new fishing vessels should be stopped immediately and the demand side of SAP should be employed by subsidizing high powered fishing vessels which can operate effectively on the deep sea

Aspects of the fishing industry and an overview of artificial reefs and fish aggregating devices for increasing fisheries output and viability in Nigeria

Aspects of the Nigerian fishing industry are outlined to explain the concept of fishing systems viability which is often influenced by a combination of factors including biological productivity, as well as technical, economic and social factors. The productivity of the aquatic environments can be increased by the construction and installation of artificial reefs and fish aggregating devices. These man-made structures provide shelters, food and breeding grounds for fin fish and shell fish. The habitat enhancement techniques are appropriate, efficient, cheap and simple strategic options for increase in fish production. Recommendations for effective utilization and long term management are outlined.

An overview of the challenges and prospects in developing an aquaculture industry in Lagos State, Nigeria

Macroeconomic growth and the development of sustainable business activities are interrelated. In Lagos State, aquaculture is a marginal economic activity thriving mainly on a semi-intensive level. Notwithstanding the available potentials for the development of successful commercial aquaculture enterprises in the state, the transformation to a full-flagged industry continues to be undetermined by certain critical factors. Feasible development strategies may be sought in increasing all stakeholders' capacity in the formulation of policies, plans and regulations, a complete separation of aquaculture from the capture fisheries in administrative structure and policy; the adoption of precautionary approach; provision of economic incentives to enhance private investments and increase output,respectively

Estrategias de arranque de biofiltros orgánicos para el tratamiento de corrientes gaseosas contaminadas con compuestos de azufre

[ES]El disulfuro de carbono (CS2) y el sulfuro de hidrógeno (H2S) son gases especialmente tóxicos presentes en una gran cantidad de emisiones gaseosas industriales, principalmente en la producción de fibras de rayón a partir de celulosa en el caso del CS2, y en la industria petroquímica en el caso del H2S. La legislación vigente en cuanto a las emisiones de estos compuestos se refiere hace que su tratamiento sea, en muchos casos, necesario. La biofiltración como tecnología para el tratamiento de corrientes gaseosas contaminadas se ha convertido en los últimos años en una alternativa a los tratamientos físico-químicos empleados hasta la fecha. Sin embargo, uno de los principales obstáculos a la hora de la implantación de este tratamiento biológico a escala industrial es la duración del periodo de aclimatación de la biomasa encargada de degradar los contaminantes, que en función del compuesto a tratar puede resultar demasiado largo para la aplicación comercial de esta tecnología. El presente trabajo se centra en el estudio de estos periodos de arranque y aclimatación, especialmente lentos en el caso del CS2, y propone una estrategia de arranque basada en la reutilización de biomasa capaz de degradar los compuestos de interés, almacenada tras usos anteriores, que permite reducir el tiempo necesario para alcanzar eficacias de eliminación elevadas. Paralelamente, se ha concluido que paradas de corta duración no afectan de manera importante a la operación del sistema.

Oxidation of Volatile Organic Compounds in Aqueous Solution and at the Air-water Interface of Aqueous Microdroplets

Isoprene (ISO),the most abundant non-methane VOC, is the major contributor to secondary organic aerosols (SOA) formation. The mechanisms involved in such transformation, however, are not fully understood. Current mechanisms, which are based on the oxidation of ISO in the gas-phase, underestimate SOA yields. The heightened awareness that ISO is only partially processed in the gas-phase has turned attention to heterogeneous processes as alternative pathways toward SOA.

During my research project, I investigated the photochemical oxidation of isoprene in bulk water. Below, I will report on the λ > 305 nm photolysis of H₂O₂ in dilute ISO solutions. This process yields C₁₀H₁₅OH species as primary products, whose formation both requires and is inhibited by O₂. Several isomers of C₁₀H₁₅OH were resolved by reverse-phase high-performance liquid chromatography and detected as MH⁺ (m/z = 153) and MH⁺-18 (m/z = 135) signals by electrospray ionization mass spectrometry. This finding is consistent with the addition of ·OH to ISO, followed by HO-ISO· reactions with ISO (in competition with O₂) leading to second generation HO(ISO)₂· radicals that terminate as C₁₀H₁₅OH via β-H abstraction by O₂.

It is not generally realized that chemistry on the surface of water cannot be deduced, extrapolated or translated to those in bulk gas and liquid phases. The water density drops a thousand-fold within a few Angstroms through the gas-liquid interfacial region and therefore hydrophobic VOCs such as ISO will likely remain in these relatively 'dry' interfacial water layers rather than proceed into bulk water. In previous experiments from our laboratory, it was found that gas-phase olefins can be protonated on the surface of pH < 4 water. This phenomenon increases the residence time of gases at the interface, an event that makes them increasingly susceptible to interaction with gaseous atmospheric oxidants such as ozone and hydroxyl radicals.

In order to test this hypothesis, I carried out experiments in which ISO(g) collides with the surface of aqueous microdroplets of various compositions. Herein I report that ISO(g) is oxidized into soluble species via Fenton chemistry on the surface of aqueous Fe(II)Cl₂ solutions simultaneously exposed to H₂O₂(g). Monomer and oligomeric species (ISO)1-8H⁺ were detected via online electrospray ionization mass spectrometry (ESI-MS) on the surface of pH ~ 2 water, and were then oxidized into a suite of products whose combined yields exceed ~ 5% of (ISO)1-8H⁺. MS/MS analysis revealed that products mainly consisted of alcohols, ketones, epoxides and acids. Our experiments demonstrated that olefins in ambient air may be oxidized upon impact on the surface of Fe-containing aqueous acidic media, such as those of typical to tropospheric aerosols.

Related experiments involving the reaction of ISO(g) with ·OH radicals from the photolysis of dissolved H₂O₂ were also carried out to test the surface oxidation of ISO(g) by photolyzing H₂O₂(aq) at 266 nm at various pH. The products were analyzed via online electrospray ionization mass spectrometry. Similar to our Fenton experiments, we detected (ISO)1-7H⁺ at pH < 4, and new m/z⁺ = 271 and m/z^- = 76 products at pH > 5.

Magnetic behavior of basic iron(III) compounds. I. Magnetic behavior of the basic iron sulphates and basic iron chromate. II. Magnetic behavior of delta ferric oxide hydroxide

I. The thermomagnetic behavior and infrared spectroscopic features of KFe₃(SO₄)₂(OH)₆ (jarosite), (H₃O)Fe₃(SO₄)₂ (OH)₆ (hydronium jarosite), KFe₃(CrO₄)₂ (OH)₆, Fe(OH)SO₄ (basic iron sulfate), and Fe(OH)CrO₄ (basic iron chromate) are reported. Fe(OH)CrO₄ and KFe₃(CrO₄)₂ (OH)₆ are shown to be weak ferro magnets with Curie temperatures of 73 and 71 °K, respectively. This unusual magnetic behavior is rationalized in terms of the ionic spin configurations of the phases. Exchange coupling through chromate bridging groups is shown to be weak.

II. The magnetic behavior and the influence of preparative history on the magnetic behavior of δFeO(OH) is reported. δFeO(OH) is shown to be a fine-particulate, uniaxial, magnetic species. Magnetization data for this species are shown to be consistent with the existence of magnetically inactive layers surrounding magnetic particles.

High pressure states in condensed matter: I. High pressure behavior of the iron-sulphur system with applications to the earth's core. II. Empirical equation of state for organic compounds at high pressures

Part I:

The earth's core is generally accepted to be composed primarily of iron, with an admixture of other elements. Because the outer core is observed not to transmit shear waves at seismic frequencies, it is known to be liquid or primarily liquid. A new equation of state is presented for liquid iron, in the form of parameters for the 4th order Birch-Murnaghan and Mie-Grüneisen equations of state. The parameters were constrained by a set of values for numerous properties compiled from the literature. A detailed theoretical model is used to constrain the P-T behavior of the heat capacity, based on recent advances in the understanding of the interatomic potentials for transition metals. At the reference pressure of 10⁵ Pa and temperature of 1811 K (the normal melting point of Fe), the parameters are: ρ = 7037 kg/m³, K_S0 = 110 GPa, K_S' = 4.53, K_S" = -.0337 GPa-1, and γ = 2.8, with γ α ρ^-1.17. Comparison of the properties predicted by this model with the earth model PREM indicates that the outer core is 8 to 10 % less dense than pure liquid Fe at the same conditions. The inner core is also found to be 3 to 5% less dense than pure liquid Fe, supporting the idea of a partially molten inner core. The density deficit of the outer core implies that the elements dissolved in the liquid Fe are predominantly of lower atomic weight than Fe. Of the candidate light elements favored by researchers, only sulfur readily dissolves into Fe at low pressure, which means that this element was almost certainly concentrated in the core at early times. New melting data are presented for FeS and FeS₂ which indicate that the FeS₂ is the S-hearing liquidus solid phase at inner core pressures. Consideration of the requirement that the inner core boundary be observable by seismological means and the freezing behavior of solutions leads to the possibility that the outer core may contain a significant fraction of solid material. It is found that convection in the outer core is not hindered if the solid particles are entrained in the fluid flow. This model for a core of Fe and S admits temperatures in the range 3450K to 4200K at the top of the core. An all liquid Fe-S outer core would require a temperature of about 4900 K at the top of the core.

Part II.

The abundance of uses for organic compounds in the modern world results in many applications in which these materials are subjected to high pressures. This leads to the desire to be able to describe the behavior of these materials under such conditions. Unfortunately, the number of compounds is much greater than the number of experimental data available for many of the important properties. In the past, one approach that has worked well is the calculation of appropriate properties by summing the contributions from the organic functional groups making up molecules of the compounds in question. A new set of group contributions for the molar volume, volume thermal expansivity, heat capacity, and the Rao function is presented for functional groups containing C, H, and O. This set is, in most cases, limited in application to low molecular liquids. A new technique for the calculation of the pressure derivative of the bulk modulus is also presented. Comparison with data indicates that the presented technique works very well for most low molecular hydrocarbon liquids and somewhat less well for oxygen-bearing compounds. A similar comparison of previous results for polymers indicates that the existing tabulations of group contributions for this class of materials is in need of revision. There is also evidence that the Rao function contributions for polymers and low molecular compounds are somewhat different.

Strategies for the Stereoselective Synthesis of Carbon Quaternary Centers via Transition Metal-Catalyzed Alkylation of Enolate Compounds

Notwithstanding advances in modern chemical methods, the selective installation of sterically encumbered carbon stereocenters, in particular all-carbon quaternary centers, remains an unsolved problem in organic chemistry. The prevalence of all-carbon quaternary centers in biologically active natural products and pharmaceutical compounds provides a strong impetus to address current limitations in the state of the art of their generation. This thesis presents four related projects, all of which share in the goal of constructing highly-congested carbon centers in a stereoselective manner, and in the use of transition-metal catalyzed alkylation as a means to address that goal.

The first research described is an extension of allylic alkylation methodology previously developed in the Stoltz group to small, strained rings. This research constitutes the first transition metal-catalyzed enantioselective α-alkylation of cyclobutanones. Under Pd-catalysis, this chemistry affords all–carbon α-quaternary cyclobutanones in good to excellent yields and enantioselectivities.

Next is described our development of a (trimethylsilyl)ethyl β-ketoester class of enolate precursors, and their application in palladium–catalyzed asymmetric allylic alkylation to yield a variety of α-quaternary ketones and lactams. Independent coupling partner synthesis engenders enhanced allyl substrate scope relative to allyl β-ketoester substrates; highly functionalized α-quaternary ketones generated by the union of our fluoride-triggered β-ketoesters and sensitive allylic alkylation coupling partners serve to demonstrate the utility of this method for complex fragment coupling.

Lastly, our development of an Ir-catalyzed asymmetric allylic alkylation of cyclic β-ketoesters to afford highly congested, vicinal stereocenters comprised of tertiary and all-carbon quaternary centers with outstanding regio-, diastereo-, and enantiocontrol is detailed. Implementation of a subsequent Pd-catalyzed alkylation affords dialkylated products with pinpoint stereochemical control of both chiral centers. The chemistry is then extended to include acyclic β-ketoesters and similar levels of selective and functional group tolerance are observed. Critical to the successful development of this method was the employment of iridium catalysis in concert with N-aryl-phosphoramidite ligands.

The changes in various iron compounds in culture media for algae. [Translation from: Archiv fur Hydrobiologie Supplemente Band 38(1/2) 151-169, 1970.]

The purpose of this work is a contribution to the quantitative record of the use of iron by planktonic algae. Preliminary experiments with Chlorella to determine the rate of iron intake in the presence of inorganic sources of iron did not produce the desired result. The crucial point of this work is the investigation of the influence of various external factors on the stability of FeEDTA (FeEDTA = Ferric(III)-compound of ethylene-diamine tetra-acetic acid), since this compound appears to be particularly well-suited as a source of iron for planktonic algae (e.g. TAMIYA et al. 1953). Cultures of Chlorella fusca in a light thermostat were used in experimental research. Methods and results are discussed.