Desempenho de discos de corte de semeadora-adubadora em diferentes quantidades de cobertura vegetal

The quality and efficiency in straw cutting are determinants in the sowing process, according to the occurrence of "tamp" and stops, the magnitude of the straw removal or even the known effects of the seed "envelopment" where the cutting mechanism can not cut the remaining straw. Thus, the objective of this study was to evaluate the performance of different mechanisms for straw cutting of a seeder individualized in different amounts of crop coverage artificially added in a clay soil. The experiment was conducted at Unesp – Sao Paulo State University in the Experimental Farm Lageado, belonging to the College of Agricultural Sciences - Unesp, Botucatu. The experimental design was split plot with four replications, with main plots consisting of five quantities of black oat straw, in area with no-tillage system and subplots of three opening furrows mechanisms, which are: plane disk (PD), corrugated disk (CD) and wavy disk (WD). The wavy disk provided greater rolling resistance, reducing the speed of the set (tractor and equipment). The plane cutting disk showed the highest values of mobilized soil area, deeper penetration into the soil, requiring lower values of vertical force and higher values of lateral force. Regarding the type of waste and doses used, they offered no resistance to cutting and there was no change in the horizontal force on straw.

Revisão dos procedimentos operacionais padrão da farmácia-escola Prof. Dr. Antonio Alonso Martinez conforme RDC 67/07

O Projeto de Iniciação Científica foi desenvolvido na Farmácia-Escola Prof. Dr. Antônio Alonso Martinez, uma unidade auxiliar da Faculdade de Ciências Farmacêuticas da UNESP-Araraquara e que é parte integrante do NAC (Núcleo de Atendimento à Comunidade). Por ser vinculada à uma instituição pública ela serve como modelo para toda a comunidade, além de ser um estabelecimento de ensino, pesquisa e extensão. Por isso, ela tem o compromisso de cumprir com todas as exigências legais de maneira exemplar, garantindo a qualidade dos produtos manipulados. Realizou-se a revisão e adequação dos Procedimentos Operacionais Padrão (POPs) presente no Manual de Boas Práticas de Manipulação da Farmácia-Escola, baseando-se nas diretrizes da RDC 67/07 (Anexo I - Boas Práticas de Manipulação em Farmácia) e também uma inspeção na rotina dos processos envolvidos na manipulação e dispensação dos produtos manipulados. Fez-se a aplicação do Roteiro de Inspeção para Farmácia - Anexo VII da RDC 67/07 com a finalidade de constatar e avaliar o cumprimento das Boas Práticas de Manipulação em Farmácias (BPMF). Verificou-se que a Farmácia-Escola ainda não está em conformidade com todos os critérios estabelecidos pela RDC 67/07, mas que mesmo com as dificuldades enfrentadas para se adequar ela atende à quase todos os itens considerados imprescindíveis. Segundo as farmacêuticas responsáveis, medidas corretivas vêm sendo estudadas para que aos poucos todos os itens constantes na Resolução em questão sejam cumpridos.

Determinação comparativa do grau de deformação plástica aplicado a componentes obtidos por conformação

The manufacturing process of components of Pressure Vessels has a great importance in the efficiency during the operation and life cycle of the equipment. Taking this into account, the objective of this dissertation was to analyze the methods to determine the strain rate in formed components by measuring the components themselves, and posterior results comparison with the values found in manufacturing standards of Pressure vessels. In this study the whole manufacturing process of a component from a pressure vessel, known as Head or End, was accompanied. Using the methodology obtained from literatures it was possible to execute the relative and logarithmic deformation measurements of these components and compare with the obtained results by means of equations presented in the Standards as AD-Merkblatt and ASME (for pressure vessels). The found results were also compared with the logarithmic methodology, taking into account the deformation of the empirical mesh and the thickness of the components studied. It is possible to conclude from this study that despite the existence of empirical methods of measurement of strain rate in components plastically formed, it is recommended the adoption in all situation of the component manufacturing standard. It can be noticed and explained during the development of this study and through the results found

Preface to Lesser Known Large dsDNA Viruses. Current Topics in Microbiology and Immunology 328

Several large dsDNA-containing viruses such as poxviruses (smallpox) and herpes viruses are well known among the scientific community, as well as the general populace, because they cause human diseases. The large dsDNA insect-infecting baculoviruses are also well known in the scientific community because they are used both as biological control agents and as protein expression systems. However, there are other large dsDNA-containing viruses, including the giant 1.2-Mb mimivirus, which are less well known even though all of them play important roles in everyday life. Seven of these virus families are reviewed in this book.

Cetacean Notes. I. Sei and Rorqual Whales on the Mississippi Coast, a Correction. II. A Dwarf Sperm Whale in Mississippi Sound and Its Helminth Parasites

I. Gunter and Christmas (1973) described the events leading to the stranding of a baleen whale on Ship Island, Mississippi, in 1968, giving the species as Balaenopteru physalus, the Rorqual. Unfortunately the identification was in error, but fortunately good photographs were shown. The underside of the tail was a splotched white, but there was no black margin. The specimen also had fewer throat and belly grooves than the Rorqual, as a comparison with True’s (1904) photograph shows. Dr. James Mead (in litt.) pointed out that the animal was a Sei Whale, Balaenoptera borealis. This remains a new Mississippi record and according to Lowery’s (1974) count, it is the fifth specimen reported from the Gulf of Mexico. The stranding of a sixth Sei Whale on Anclote Keys in the Gulf, west of Tarpon Springs, Florida on 30 May 1974, was reported in the newspapers and by the Smithsonian Institution (1974). II. Gunter, Hubbs and Beal (1955) gave measurements on a Pygmy Sperm Whale, Kogia breviceps, which stranded on Mustang Island on the Texas coast and commented upon the recorded variations of proportional measurements in this species. Then according to Raun, Hoese and Moseley (1970) these questions were resolved by Handley (1966), who showed that a second species, Kogia simus, the Dwarf Sperm Whale, is also present in the western North Atlantic. Handley’s argument is based on skull comparisons and it seems to be rather indubitable. According to Raun et al. (op. cit.), the stranding of a species of Kogia on Galveston Island recorded by Caldwell, Ingles and Siebenaler (1960) was K. simus. They also say that Caldwell (in litt.) had previously come to the same conclusion. Caldwell et al. also recorded another specimen from Destin, Florida, which is now considered to have been a specimen of simus. The known status of these two little sperm whales in the Gulf is summarized by Lowery (op. cit.).

Revision of Hawaiian, Australasian, Oriental, and Japanese Parandrinae (Coleoptera, Cerambycidae)

A comprehensive revision of the Subfamily Parandrinae (Coleoptera, Cerambycidae) from the Hawaiian, Australasian, Oriental, and Japanese regions is presented. Seven (7) new genera are described: Komiyandra, Melanesiandra, Papuandra, Storeyandra, Hawaiiandra, Caledonandra, and Malukandra. All known, indigenous species from these regions are assigned to new genera resulting in the following new combinations: Komiyandra janus (Bates, 1875), K. shibatai (Hayashi, 1963), K. formosana (Miwa and Mitono, 1939), K. lanyuana (Hayashi, 1981), Melanesiandra striatifrons (Fairmaire, 1879), M. solomonensis (Arigony, 1983), Caledonandra austrocaledonica (Montrouzier, 1861), C. passandroides (Thomson, 1867), Hawaiiandra puncticeps (Sharp, 1878), Malukandra heterostyla (Lameere, 1902), Storeyandra frenchi (Blackburn, 1895), and Papuandra araucariae (Gressitt, 1959). Thirty-one (31) new species are described: Komiyandra javana, K. nayani, K. ohbayashii, K. luzonica, K. philippinensis, K. mindanao, K. mehli, K. vivesi, K. lombokia, K. sulawesiana, K. irianjayana, K. menieri, K. sangihe, K. mindoro, K. niisatoi, K. drumonti, K. cabigasi, K. koni, K. johkii, K. poggii, K. uenoi, Melanesiandra bougainvillensis, M. birai, Papuandra gressitti, P. weigeli, P. queenslandensis, P. norfolkensis, P. rothschildi, P. oberthueri, Malukandra jayawijayana and M. hornabrooki. A lectotype is designated for Parandra janus Bates, 1875. Komiyandra janus (Bates, 1875) is excluded from nearly all previously reported locations, even one location given in the original description, and is now only known from Sulawesi. A paralectotype of Parandra janus Bates, 1875, is designated as a paratype for Komiyandra menieri, new species. Komiyandra formosana is excluded from the Japanese (Ryukyu Is.) fauna. Parandra vitiensis Nonfried, 1894, is again placed in synonymy with P. striatifrons Fairmaire (now Melanesiandra striatifrons). A neotype is designated for Parandra austrocaledonica Montrouzier, 1861. A lectotype is designated for Parandra janus Bates, 1875. The lectotype of Parandra gabonica Thomson, 1858, designated by Quentin and Villiers (1975) is considered invalid. Papuandra araucariae (Gressitt, 1959) is excluded from the fauna of Norfolk Island. The African species Stenandra kolbei (Lameere, 1903) is reported for the first time from Asia (N. Vietnam). Keys are presented to separate worldwide genera of Parandrini and all species within the study regions. Illustrations are provided for all species including many special characters to differentiate genera and species.

Revisão dos procedimentos operacionais padrão da farmácia-escola Prof. Dr. Antonio Alonso Martinez conforme RDC 67/07

O Projeto de Iniciação Científica foi desenvolvido na Farmácia-Escola Prof. Dr. Antônio Alonso Martinez, uma unidade auxiliar da Faculdade de Ciências Farmacêuticas da UNESP-Araraquara e que é parte integrante do NAC (Núcleo de Atendimento à Comunidade). Por ser vinculada à uma instituição pública ela serve como modelo para toda a comunidade, além de ser um estabelecimento de ensino, pesquisa e extensão. Por isso, ela tem o compromisso de cumprir com todas as exigências legais de maneira exemplar, garantindo a qualidade dos produtos manipulados. Realizou-se a revisão e adequação dos Procedimentos Operacionais Padrão (POPs) presente no Manual de Boas Práticas de Manipulação da Farmácia-Escola, baseando-se nas diretrizes da RDC 67/07 (Anexo I - Boas Práticas de Manipulação em Farmácia) e também uma inspeção na rotina dos processos envolvidos na manipulação e dispensação dos produtos manipulados. Fez-se a aplicação do Roteiro de Inspeção para Farmácia - Anexo VII da RDC 67/07 com a finalidade de constatar e avaliar o cumprimento das Boas Práticas de Manipulação em Farmácias (BPMF). Verificou-se que a Farmácia-Escola ainda não está em conformidade com todos os critérios estabelecidos pela RDC 67/07, mas que mesmo com as dificuldades enfrentadas para se adequar ela atende à quase todos os itens considerados imprescindíveis. Segundo as farmacêuticas responsáveis, medidas corretivas vêm sendo estudadas para que aos poucos todos os itens constantes na Resolução em questão sejam cumpridos.

Determinação comparativa do grau de deformação plástica aplicado a componentes obtidos por conformação

The manufacturing process of components of Pressure Vessels has a great importance in the efficiency during the operation and life cycle of the equipment. Taking this into account, the objective of this dissertation was to analyze the methods to determine the strain rate in formed components by measuring the components themselves, and posterior results comparison with the values found in manufacturing standards of Pressure vessels. In this study the whole manufacturing process of a component from a pressure vessel, known as Head or End, was accompanied. Using the methodology obtained from literatures it was possible to execute the relative and logarithmic deformation measurements of these components and compare with the obtained results by means of equations presented in the Standards as AD-Merkblatt and ASME (for pressure vessels). The found results were also compared with the logarithmic methodology, taking into account the deformation of the empirical mesh and the thickness of the components studied. It is possible to conclude from this study that despite the existence of empirical methods of measurement of strain rate in components plastically formed, it is recommended the adoption in all situation of the component manufacturing standard. It can be noticed and explained during the development of this study and through the results found

A snapshot of suspended sediment and fluid mud occurrence in a mixed-energy embayment, Tijucas Bay, Brazil

Along the southern Brazilian coast, Tijucas Bay is known for its unique muddy tidal flats associated with chenier plains. Previous field observations pointed to very high suspended sediment concentrations (SSCs) in the inner parts of the bay, and in the estuary of the Tijucas River, suggesting the presence of fluid mud. In this study, the occurrences of suspended sediments and fluid mud were examined during a larger-scale, high-resolution 2-day field campaign on 1-2 May 2007, encompassing survey lines spanning nearly 80 km, 75 water sampling stations for near-bottom density estimates, and ten sediment sampling stations. Wave refraction modeling provided qualitative wave energy estimates as a function of different incidence directions. The results show that SSC increases toward the inner bay near the water surface, but seaward near the bottom. This suggests that suspended sediment is supplied by the local rivers, in particular the Tijucas. Near-surface SSCs were of the order of 50 mg l(-1) close to the shore, but exceeded 100 mg l(-1) near the bottom in the deeper parts of the bay. Fluid mud thickness and location given by densimetry and echo-sounding agreed in some places, although being mostly discordant. The best agreement was observed where wave energy was high during the campaign. The discrepancy between the two methods may be an indication for the existence of fluid mud, which is recorded by one method but not the other. Agreement is considered to be an indication of fluidization, whereas disagreement indicates more consolidation. Wave modeling suggests that waves from the ENE and SE are the most effective in supplying energy to the inner bay, which may induce the liquefaction of mud deposits to form fluid mud. Nearshore mud resuspension and weak horizontal currents result in sediment-laden offshore flow, which explains the higher SSCs measured in the deeper parts of the bay, besides providing a mechanism for fine-sediment export to the inner shelf.

Range extensions and conservation of some threatened or little known Brazilian grassland birds

Populations of grassland birds are declining in Brazil due to profound alterations to grassland habitats. In this paper, we present recent records and range extensions for 12 threatened or little known Brazilian grassland species: Ocellated Crake Micropygia schomburgkii, Sickle-winged Nightjar Eleothreptus anomalus, Campo Miner Geositta poeciloptera, Rufous-sided Pygmytyrant Euscarthmus rufomarginatus, Sharp-tailed Grass-tyrant Culicivora caudacuta, Cocktailed Tyrant Alectrurus tricolor, Cinereous Warbling-finch Poospiza cinerea, Black-masked Finch Coryphaspiza melanotis, Tawny-bellied Seedeater Sporophila hypoxantha, Marsh Seedeater S. palustris, Chestnut Seedeater S. cinnamomea and Black-bellied Seedeater S. melanogaster. We also comment on the biogeography and conservation of these species.

Antioxidant, anti-acetylcholinesterase and cytotoxic activities of ethanol extracts of peel, pulp and seeds of exotic Brazilian fruits Antioxidant, anti-acetylcholinesterase and cytotoxic activities in fruits

Ethanol extracts of powdered genipap (Genipa americana L), umbu (Spondia tuberosa A.) and siriguela (Spondia purpurea L) prepared from separate pulp, seeds and peel were investigated for their (i) antioxidant capacity, which was evaluated by various known methods; (ii) acetylcholinesterase (AChE) inhibitory activity; and (iii) cytotoxic effect on corneal epithelial cells of sheep. The highest values of total phenolic content were obtained with peel and seed extracts. Siriguela and umbu (seeds and peel) extracts displayed the highest antioxidant activities. Lipid peroxidation assays using mimetic biomembranes and mouse liver homogenates indicated that genipap pulp is a promising antioxidant. The investigation of phenols and organic acid contents revealed the presence of quercetin, citric and quinic acids, chlorogenic acid derivatives, among others, in several extracts, with the highest amount found in siriguela seeds. Genipap pulp and siriguela seed ethanol extracts presented an AChE inhibition zone similar to that of the positive control, carbachol. AChE inhibition assay with chlorogenic acid, one of the main constituents of siriguela seeds, revealed that this acid showed activity similar to that of the control physostigmine. These data suggest that these extracts are potentially important antioxidant supplements for the everyday human diet, pharmaceutical and cosmetic industries. (C) 2012 Elsevier Ltd. All rights reserved.

Ecological distribution of the shrimp Litopenaeus schmitti (Burkenroad, 1936) (Decapoda, Penaeoidea) in Ubatuba Bay, Sao Paulo, Brazil

The penaeidean Litopenaeus schmitti, popularly known as white shrimp, is a species of great economic importance, being a target of fishing fleets in the southeast region of Brazil. It is distributed through the western Atlantic, from Cuba to Brazil, until Rio Grande do Sul. Adults are found from shallow depths up to 30 m and have been found to depths of 47 m in the state of Rio de Janeiro, while juveniles are located in bays and estuaries. The studied species is seasonally distributed in the region of Ubatuba. The objectives of this study are to analyze the abundance and ecological distribution of L. schmitti and to assess if and when juveniles use the Indaia estuary during their life cycle. Furthermore, the hypothesis was tested that the main period of recruitment in the bay coincides with the period of closure of fisheries defined by the Instruction of IBAMA. To that end, samples were taken monthly from July 2005 through June 2007, both in Ubatuba Bay and in the estuary formed by the Rio Indaia. At each sampling station, salinity, temperature (bottom), depth, organic matter content (%), and grain size of sediments were measured. We found that the largest catches in the estuary were in late spring and early summer. In Ubatuba Bay, peak catches occurred during winter and early spring, whereas in the second year, already in May, there was a high peak capture. The variation in the number of individuals was correlated with some environmental factors both in the estuary and in the inlet (p < 0.05). In the estuary, abundance was positively correlated with temperature (p = 0.008) and organic matter (p = 0.025) and negatively with depth (p = 0.009). Regarding the Ubatuba Bay, only temperature (p = 0.034) and depth (p = 0.013) were significantly associated with the distribution of the shrimp, both being negative relations. The shrimp L. schmitti uses both the estuarine as well the shore environment, particularly the Ubatuba estuary and its adjacent bay, to complete its life cycle. The proposed period of fisheries closure (between March to May in the state of Sao Paulo) for this and other shrimps coincides with individuals capable of reproduction entering the inlet and thus are being protected.

Gastrotricha: A Marine Sister for a Freshwater Puzzle

Background: Within an evolutionary framework of Gastrotricha Marinellina flagellata and Redudasys fornerise bear special interest, as they are the only Macrodasyida that inhabit freshwater ecosystems. Notwithstanding, these rare animals are poorly known; found only once (Austria and Brazil), they are currently systematised as incertae sedis. Here we report on the rediscovery of Redudasys fornerise, provide an account on morphological novelties and present a hypothesis on its phylogenetic relationship based on molecular data. Methodology/Principal Findings: Specimens were surveyed using DIC microscopy and SEM, and used to obtain the 18 S rRNA gene sequence; molecular data was analyzed cladistically in conjunction with data from 42 additional species belonging to the near complete Macrodasyida taxonomic spectrum. Morphological analysis, while providing new information on taxonomically relevant traits (adhesive tubes, protonephridia and sensorial bristles), failed to detect elements of the male system, thus stressing the parthenogenetic nature of the Brazilian species. Phylogenetic analysis, carried out with ML, MP and Bayesian approaches, yielded topologies with strong nodal support and highly congruent with each other. Among the supported groups is the previously undocumented clade showing the alliance between Redudasys fornerise and Dactylopodola agadasys; other strongly sustained clades include the densely sampled families Thaumastodermatidae and Turbanellidae and most genera. Conclusions/Significance: A reconsideration of the morphological traits of Dactylopodola agadasys in light of the new information on Redudasys fornerise makes the alliance between these two taxa very likely. As a result, we create Anandrodasys gen. nov. to contain members of the previously described D. agadasys and erect Redudasyidae fam. nov. to reflect this novel relationship between Anandrodasys and Redudasys. From an ecological perspective, the derived position of Redudasys, which is deeply nested within the Macrodasyida clade, unequivocally demonstrates that invasion of freshwater by gastrotrichs has taken place at least twice, in contrast with the single event hypothesis recently put forward.

Correlation Between Molecular Conformation, Packing, and Dynamics in Oligofluorenes: A Theoretical/Experimental Study

Fluorene-based systems have shown great potential as components in organic electronics and optoelectronics (organic photovoltaics, OPVs, organic light emitting diodes, OLEDs, and organic transistors, OTFTs). These systems have drawn attention primarily because they exhibit strong blue emission associated with relatively good thermal stability. It is well-known that the electronic properties of polymers are directly related to the molecular conformations and chain packing of polymers. Here, we used three oligofluorenes (trimer, pentamer, and heptamer) as model systems to theoretically investigate the conformational properties of fluorene molecules, starting with the identification of preferred conformations. The hybrid exchange correlation functional, OPBE, and ZINDO/S-CI showed that each oligomer exhibits a tendency to adopt a specific chain arrangement, which could be distinguished by comparing their UV/vis electronic absorption and C-13 NMR spectra. This feature was used to identify the preferred conformation of the oligomer chains in chloroform-cast films by comparing experimental and theoretical UV/vis and C-13 NMR spectra. Moreover, the oligomer chain packing and dynamics in the films were studied by DSC and several solid state NMR techniques, which indicated that the phase behavior of the films may be influenced by the tendency that each oligomeric chain has to adopt a given conformation.

Descriptions of Macrolygistopterus subparallelus Pic, 1930 immatures from southeastern Brazil (Coleoptera, Lycidae, Lycinae, Calochromini)

Mature larva and pupa of Macrolygistopterus subparallelus Pic are described and compared to known Calochromini immatures. Larvae were collected alive inside dead trunk in the Atlantic Forest at Estacao Biologica de Boraceia, Salesopolis, Sao Paulo, Brazil. They were maintained in laboratory conditions, and the pupal period was 12 days (one observation). The pupa of this genus is described for the first time. This larva differs from known Calochromini larvae mainly because of its almost cylindrical campodeiform body and longer urogomphi.