ANTAGONISM IS THE PREDOMINANT EFFECT OF HERBICIDE MIXTURES USED FOR IMIDAZOLINONE-RESISTANT BARNYARDGRASS (Echinochloa crus-galli) CONTROL

ABSTRACTHerbicides mixtures are used in many situations without the adequate knowledge related with the effect on major target weeds. The objective of this study was to evaluate the effects of different herbicides mixtures used in irrigated rice in order to establish the adequate combinations for the prevention and management of herbicide resistance in barnyardgrass (Echinochloa crus-galli). Three experiments were performed at field conditions with all major post-emergent herbicides used in irrigated rice in Brazil. The first experiment was performed with barnyardgrass resistant to imidazolinone herbicides and herbicides applied at label rates. The second and third experiments were performed with barnyardgrass resistant and susceptible to imidazolinone herbicides applied at doses of 50 or 75% of the label rates. The occurrence of additive, synergistic and antagonistic effects was identified at 18, 18 and 64%, respectively, among the total of 50 different associations of herbicide and rates evaluated. In general, the mixture of ACCase inhibitors with ALS inhibitors, quinclorac, clomazone + propanil or thiobencarb resulted in antagonism. Sinergic mixtures were found in clomazone with propanil + thiobencarb, profoxydim with cyhalofop-butyl or clomazone, and quinclorac with imazapyr + imazapic, bispyribac-sodium or cyhalofop-butyl. The mixtures of quinclorac with profoxydim were antagonic. Rice grain yield varied according to the efficiency of weed control. Seveveral mixtures were effective for imidazolinone resistant barnyardgrass control.

The Human Communication Science Virtual Lab (HCS vLab): A repository microclimate in a rapidly evolving research-ecosystem

Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

Laser cladding with scanning optics

Scanning optics create different types of phenomena and limitation to cladding process compared to cladding with static optics. This work concentrates on identifying and explaining the special features of laser cladding with scanning optics. Scanner optics changes cladding process energy input mechanics. Laser energy is introduced into the process through a relatively small laser spot which moves rapidly back and forth, distributing the energy to a relatively large area. The moving laser spot was noticed to cause dynamic movement in the melt pool. Due to different energy input mechanism scanner optic can make cladding process unstable if parameter selection is not done carefully. Especially laser beam intensity and scanning frequency have significant role in the process stability. The laser beam scanning frequency determines how long the laser beam affects with specific place local specific energy input. It was determined that if the scanning frequency in too low, under 40 Hz, scanned beam can start to vaporize material. The intensity in turn determines on how large package this energy is brought and if the intensity of the laser beam was too high, over 191 kW/cm2, laser beam started to vaporize material. If there was vapor formation noticed in the melt pool, the process starts to resample more laser alloying due to deep penetration of laser beam in to the substrate. Scanner optics enables more flexibility to the process than static optics. The numerical adjustment of scanning amplitude enables clad bead width adjustment. In turn scanner power modulation (where laser power is adjusted according to where the scanner is pointing) enables modification of clad bead cross-section geometry when laser power can be adjusted locally and thus affect how much laser beam melts material in each sector. Power modulation is also an important factor in terms of process stability. When a linear scanner is used, oscillating the scanning mirror causes a dwell time in scanning amplitude border area, where the scanning mirror changes the direction of movement. This can cause excessive energy input to this area which in turn can cause vaporization and process instability. This process instability can be avoided by decreasing energy in this region by power modulation. Powder feeding parameters have a significant role in terms of process stability. It was determined that with certain powder feeding parameter combinations powder cloud behavior became unstable, due to the vaporizing powder material in powder cloud. Mainly this was noticed, when either or both the scanning frequency or powder feeding gas flow was low or steep powder feeding angle was used. When powder material vaporization occurred, it created vapor flow, which prevented powder material to reach the melt pool and thus dilution increased. Also powder material vaporization was noticed to produce emission of light at wavelength range of visible light. This emission intensity was noticed to be correlated with the amount of vaporization in the powder cloud.

Assessment of silver-stained AFLP markers for studying DNA polymorphism in proso millet (Panicum miliaceum L.)

Proso millet (Panicum miliaceum L.) is a serious weed in North America. A high number of wild proso millet biotypes are known but the genetic basis of its phenotypic variation is poorly understood. In the present study, a non-radioactive silver staining method for PCR-Amplified Fragment Length Polymorphism (AFLP) was evaluated for studying genetic polymorphism in American proso millet biotypes. Twelve biotypes and eight primer combinations with two/three and three/three selective nucleotides were used. Pair of primers with two/three selective nucleotides produced the highest number of amplified DNA fragments, while pair of primers with three/three selective nucleotides were more effective for revealing more polymorphic DNA fragments. The two better primer combinations were EcoR-AAC/Mse-CTT and EcoR-ACT/Mse-CAA with seven and eleven polymorphic DNA fragments, respectively. In a total of 450 amplified fragments, at least 339 appeared well separated in a silver stained acrylamide gel and 39 polymorphic DNA bands were scored. The level of polymorphic DNA (11.5%) using only eight pairs of primers were effective for grouping proso millet biotypes in two clusters but insufficient for separating hybrid biotypes from wild and crop. Nevertheless, the present result indicates that silver stained AFLP markers could be a cheap and important tool for studying genetic relationships in proso millet.

Reproductive phenology of Melocactus (Cactaceae) species from Chapada Diamantina, Bahia, Brazil

This paper discusses the phenological strategies of Melocactus glaucescens Buining & Brederoo, M. paucispinus G. Heimen & R. Paul, M. ernestii Vaupel and M. ×albicephalus Buining & Brederoo, species from Chapada Diamantina, northeastern Brazil. Melocactus glaucescens, M. ernestii and M. ×albicephalus occur sympatrically in an area of "caatinga"/"cerrado" vegetation, and M. paucispinus in an area of "cerrado"/"campo rupestre". The superposition of flowering in these sympatric taxa was compared and analyzed. The phenology of M. paucispinus was correlated with both abiotic and biotic factors. Flowering of M. glaucescens and M. ×albicephalus were observed to be continuous (though with moderate peaks of activity), while fruiting was sub-annual. Melocactus ernestii exhibited an annual pattern of both flowering and fruiting; while in M. paucispinus the same patterns were sub-annual. These sympatric taxa showed 40% overlap of flowering periods, reaching to more than 50% in paired combinations of taxa, considering both the number of specimens flowering, as well as the quantity of resources being offered. Available information indicates that these taxa share pollinators, but phenological data rejects the hypothesis of shared pollinators and supports the hypothesis of hybridization in the study area. Rainfall was negatively correlated with flowering in M. paucispinus, but positively correlated with fruiting. Flowering of M. paucispinus in dry periods of the year avoids that erect flowers positioned in terminal cephalium, exposed in open areas of the vegetation, be damaged for the rains, while fruiting in rainy periods can be favorable to the dispersion and germination of this species.

From genes to communities : stress tolerance in eelgrass (Zostera marina)

Shallow coastal areas are dynamic habitats that are affected by a variety of abiotic and biotic factors. In addition to the natural environmental stress, estuarine and coastal seagrass ecosystems are exposed to effects of climate change and other anthropogenic impacts. In this thesis the effect of different abiotic (shading stress, salinity and temperature) and biotic stressors (presence of co-occurring species) and different levels and combinations of stressors on the performance and survival of eelgrass (Zostera marina) was assessed. To investigate the importance of scale for stress responses, varying levels of biological organization (genotype, life stage, population and plant community) were studied in field and aquarium experiments. Light limitation, decreased salinity and increased temperature affected eelgrass performance negatively in papers I, II and III, respectively. While co-occurring plant species had no notable effect on eelgrass in paper IV, the presence of eelgrass increased the biomass of Potamogeton perfoliatus. The findings in papers II and III confirmed that more extreme levels of salinity and temperature had stronger impacts on plant performance compared to intermediate levels, but intermediate levels also had more severe effects on plants when they were exposed to several stressors, as illustrated in paper II. Thus, multiple stressors had negative synergetic effects. The results in papers I, II and III indicate that future changes in light climate, salinity and temperature can have serious impacts on eelgrass performance and survival. Stress responses were found to vary among genotypes, life stages and populations in papers I, II and III, respectively, emphasizing the importance of study scale. The results demonstrate that while stress in general affects seagrass productivity negatively, the severity of effects can vary substantially depending on the studied scale or level of biological organization. Eelgrass genotypes can differ in their stress and recovery processes, as observed in paper I. In paper II, eelgrass seedlings were less prone to abiotic stress compared to adult plants, but stress also decreased their survival considerably. This indicates that recruitment and re-colonization through seeds might be threatened in the future. Variation among population responses observed in paper III indicates that long-term local adaptation under differing selection pressures has caused divergence in salinity tolerance between Baltic eelgrass populations. This variability in stress tolerance observed in papers I and III suggests that some eelgrass genotypes and populations have a better capacity to adapt to changes and survive in a changing environment. Multiple stressors and biological level-specific responses demonstrate the uncertainty in predicting eelgrass responses in a changing environment. As eelgrass populations may differ in their stress tolerance both within and across regions, conservation strategies at both local and regional scales are urgently needed in order to ensure the survival of these important ecosystems.

Hedge-rahastojen menestyksen pysyvyys ja suhteellinen suoriutuminen sijoittajan näkökulmasta

The purpose of the thesis is to examine the long-term performance persistence and relative performance of hedge funds during bear and bull market periods. Performance metrics applied for fund rankings are raw return, Sharpe ratio, mean variance ratio and strategy distinctiveness index calculated of the original and clustered data correspondingly. Four different length combinations for selection and holding periods are employed. The persistence is examined using decile and quartile portfolio formatting approach and on the basis of Sharpe ratio and SKASR as performance metrics. The relative performance persistence is examined by comparing hedge portfolio returns during varying stock market conditions. The data is gathered from a private database covering 10,789 hedge funds and time horizon is set from January 1990 to December 2012. The results of this thesis suggest that long-term performance persistence of the hedge funds exists. The degree of persistence also depends on the performance metrics employed and length combination of selection and holding periods. The best results of performance persistence were obtained in the decile portfolio analysis on the basis of Sharpe ratio rankings for combination of 12-month selection period and the holding period of equal length. The results also suggest that the best performance persistence occurs in the Event Driven and Multi strategies. Dummy regression analysis shows that a relationship between hedge funds and stock market returns exists. Based on the results, Dedicated Short Bias, Global Macro, Managed Futures and Other strategies perform well during bear market periods. The results also indicate that the Market Neutral strategy is not absolutely market neutral and the Event Driven strategy has the best performance among all hedge strategies.

Online peer to peer lending: clustering borrowers using self-organizing maps

The purpose of this thesis is to find out whether all the peer to peer lenders are unworthy of credit and also if there are single qualities or combinations of qualities that determine the probability of default of a person or group of people. Distinguishing qualities are searched with self-organizing maps (SOM). Qualities and groups of people found by the self-organizing map are then compared to the average. The comparison is carried out by looking how big proportion of borrowers meeting the criteria is two months or more behind with their payments. Research data used is collected by an Estonian peer to peer lending company during the years of 2011-2014. Data consists of peer to peer borrowers and information gathered from them.

Tulevaisuuden työkonepuomin globaali optimointi -esiselvitys

Monitavoiteoptimointia käytetään laajasti auto- ja lentokoneteollisuudessa suunnittelun apu-välineenä, mutta muuten sen käyttö ei ole vielä yleistynyt laajemmin. Tässä työssä on tarkoi-tus tehdä laaja esiselvitys monitavoiteoptimoinnista ja sen hyödyntämisestä työkonepuomien suunnittelun apuvälineenä. Työ tehtiin yhteistyössä Lappeenrannan teknillisen yliopiston ja projektiin osallistuvien FIMA ry:n jäsenten kanssa. Tulosten ja johtopäätösten perusteella tutkimusta tullaan mahdollisesti jatkamaan Tampereen teknillisen yliopiston tohtorikoulussa. Työssä selvitettiin mitä monitavoiteoptimoinnilla tarkoitetaan ja esitellään sen etenemisvai-heet. Lisäksi työssä esitellään lyhyesti kuusi monitavoiteoptimointiohjelmistoa pääominai-suuksineen sekä selvitetään ohjelmistolisenssien hintoja. Työssä optimointiin perehdyttiin teleskooppipuomin jatkoksen case -tutkimuksen avulla. Ni-velpuomit ja nivel- ja teleskooppipuomien yhdistelmät rajattiin työn ulkopuolelle. Työssä muodostettiin teleskooppipuomin jatkoksen poikkileikkauksen optimointityökalu. Sen avulla voidaan laskea luotettavasti optimit mitat painon suhteen niin, että lommahdusrajoitteet, tai-vutusvastus sekä taipuma otetaan huomioon ja samalla voitiin arvioida optimointiprosessin etuja ja haittoja. Optimoinnin tuloksia voidaan käyttää edelleen monitavoiteoptimoinnin lähtö-arvoina. Optimointi tehtiin Matlabin avulla ja tulokset verifioitiin AGIFAP -elementtimenetelmäohjelmistolla. Optimoituja tuloksia tutkittiin edelleen Femap -elementtimenetelmäohjelmistolla, jolla haettiin vuorovaikutussuhteita monitavoiteoptimoinnin tueksi. FE -analyysien avulla muodostettiin kaksi apuohjelmaa optimoinnin tueksi. Työssä havaittiin, että teleskooppipuomin jatkoksen optimointi vaatii FE -analyysiohjelmiston rinnalleen, jotta voidaan varmistua rakenteen kestävyydestä ja optimoida väsymiskestävyyt-tä. Liukupalojen vaikutus teleskooppipuomin käytökseen sekä väsymiskestävyyden optimoin-ti vaatii jatkotutkimusta.

Germination and morphological characterization of the fruits, seeds, and seedlings of Pilosocereus gounellei

The present work examined the germination and morphology of the fruits and seeds of the cactus Pilosocereus gounellei (xique-xique) and describeb the different stages of seedling growth. Germination tests examined the effects of combinations of two illumination regimes (a 12 hour photoperiod and total darkness) and three temperature regimes (25, 30, and 20-30 ºC) on the seeds of this species. Germination counts were made daily until the 16th day after sowing and the germination percentage and velocity index, and average germination time were evaluated. Descriptions of seed morphology considered both their external and internal aspects. The processes of germination and seedling growth were evaluated during 150 days and eight developmental stages were identified based on morphological changes. The fruits of the xique-xique cactus are 40.67 ± 4.40 mm long and 48.09 ± 3.23 mm in diameter, weigh 53.85 ± 10.03 g, and contain 3713 ± 689.50 seeds. Alternating temperatures of 20-30 ºC together with a photoperiod of 12 hours of light resulted in the highest seed germination rate. The seeds are positively photoblastic and germination is epigeal and fanerocotyledonary. Seedling growth is slow, but at 150 days after sowing the plants had developed epicotyls, large numbers of thorns, and the whole plant averaged 59.56 mm in height.

Occurrence of Akodon cursor (Rodentia, Cricetidae) with 14, 15 and 16 chromosome cytotypes in the same geographic area in Southern Brazil

The karyotype of Akodon cursor (initially identified as A. arviculoides) had been reported with chromosomal numbers 14 and 15 in the South and Southeast and 16 in Northeastern Brazil. We found the three cytotypes in a region of Southern Brazil. The G-band patterns of these specimens were the same as those from southeastern and northeastern regions. Seventeen different combinations of chromosomes due to a complex rearrangement in pair 1 and pericentric inversions in pairs 2 and 3 were identified. Seven of these combinations are new to in the literature.

Effect of taxol on chromosome aberrations induced by gamma radiation or by doxorubicin in Chinese hamster ovary cells

Combined therapy with radiation and chemotherapy has being increasingly used in cancer treatment. The effect of combinations of taxol (0.08 mug/ml) with doxorubicin (DXR, 0.5 or 1.0 mug/ml) or gamma radiation (20 or 40 cGy) was examined in two different treatment schedules (pretreatment or simultaneous treatment) using Chinese hamster ovary (CHO) cells treated at the G2 phase of the cell cycle. The results showed that taxol did not have a radiosensitizing effect on the chromosomal aberrations induced by gamma radiation nor did it have a potentiating effect on the chromosomal aberrations induced by DXR in CHO cells treated in the G2 phase of the cell cycle

Diallel cross analysis for young plants of brachytic maize (Zea mays L.) varieties

Six brachytic maize varieties were crossed in a diallel mating scheme. Both varieties and crosses were grown hydroponically in a greenhouse, in randomized complete blocks with three replications in two seasons. Four brachytic double cross hybrids were used as checks. Twenty-eight days after planting, data for eight traits were taken for weights of the total plant (TPW), top plant (TOW), total roots (TRW), seminal roots (SRW), and nodal roots (NRW) and number of total roots (TRN), seminal roots (SRN), and nodal roots (NRN). Ten plants were measured in each plot and all the analyses were accomplished with plot means. In the diallel cross the top plant contributed 57.6% of the total plant weight, for seminal roots 15.4%, and for nodal roots 27.0%. Root number distribution was 36.7% seminal roots and 63.3% nodal roots. Approximately the same ratios were observed in the checks. The average heterosis effects were nonsignificant for all traits; the other components of heterosis (variety and specific heterosis) also were not important sources of variation in young plants. The overall results suggest that nonadditive gene action is not an important source of variation for the plant and root system of young plants. The positive correlation coefficients for combinations of traits indicated that they are under the control of a polygenic system

Potential of twenty exotic germplasms to improve Brazilian maize architecture

Temperate and temperate x tropical germplasms were introduced into the maize breeding of the Department of Genetics (ESALQ-USP). Twenty populations designated as P-1 to P-20 and a check population were evaluated in a randomized complete block design with two replications at Piracicaba, SP, Brazil. Plots were 2.0 m long, spaced 1.0 m apart, with 10 plants per plot after thinning. The following traits were evaluated: PH, plant height; EH, ear height; TB, tassel branch number; KW, 100 kernels weight; EL, ear length; ED, ear diameter; KR, kernels per row, and RN, number of rows of kernels. The means of the exotic populations showed a variation in performance for all traits. The population means were greater than check means for KW, EL, and KR. Populations P-9, P-10, P-12, and P-13 showed low relative ear placement values (EH/PH index), indicating that these materials could contribute to lower ear placement in local populations. P-1 and P-9 showed a high potential to reduce TB. The phenotypic correlation coefficients among populations were positive for most combinations, except for RN with PH, EH, TB, and KW. Predictions of 19 composite means were obtained for all traits.

Distribution of AMPA-type glutamate receptor subunits in the chick visual system

Several glutamate receptor (GluR) subunits have been characterized during the past few years. In the present study, subunit-specific antisera were used to determine the distribution of the AMPA-type glutamate receptor subunits GluR1-4 in retinorecipient areas of the chick brain. Six white leghorn chicks (Gallus gallus, 7-15 days old, unknown sex) were deeply anesthetized and perfused with 4% buffered paraformaldehyde and brain sections were stained using immunoperoxidase techniques. The AMPA-type glutamate receptor subunits GluR1, GluR2/3 and GluR4 were present in several retinorecipient areas, with varying degrees of colocalization. For example, perikarya in layers 2, 3, and 5 of the optic tectum contained GluR1, whereas GluR2/3 subunits appeared mainly in neurons of layer 13. The GluR4 subunit was only detected in a few cells of the tectal layer 13. GluR1 and GluR2/3 were observed in neurons of the nucleus geniculatus lateralis ventralis, whereas GluR4 was only present in its neuropil. Somata in the accessory optic nucleus appeared to contain GluR2/3 and GluR4, whereas GluR1 was the dominant subunit in the neuropil of this nucleus. These results suggest that different subpopulations of visual neurons might express different combinations of AMPA-type GluR subunits, which in turn might generate different synaptic responses to glutamate derived from retinal ganglion cell axons