Use of the dried blood spot sampling process coupled with fast gas chromatography and negative-ion chemical ionization tandem mass spectrometry: application to fluoxetine, norfluoxetine, reboxetine, and paroxetine analysis.

The objective of this work was to combine the advantages of the dried blood spot (DBS) sampling process with the highly sensitive and selective negative-ion chemical ionization tandem mass spectrometry (NICI-MS-MS) to analyze for recent antidepressants including fluoxetine, norfluoxetine, reboxetine, and paroxetine from micro whole blood samples (i.e., 10 microL). Before analysis, DBS samples were punched out, and antidepressants were simultaneously extracted and derivatized in a single step by use of pentafluoropropionic acid anhydride and 0.02% triethylamine in butyl chloride for 30 min at 60 degrees C under ultrasonication. Derivatives were then separated on a gas chromatograph coupled with a triple-quadrupole mass spectrometer operating in negative selected reaction monitoring mode for a total run time of 5 min. To establish the validity of the method, trueness, precision, and selectivity were determined on the basis of the guidelines of the "Société Française des Sciences et des Techniques Pharmaceutiques" (SFSTP). The assay was found to be linear in the concentration ranges 1 to 500 ng mL(-1) for fluoxetine and norfluoxetine and 20 to 500 ng mL(-1) for reboxetine and paroxetine. Despite the small sampling volume, the limit of detection was estimated at 20 pg mL(-1) for all the analytes. The stability of DBS was also evaluated at -20 degrees C, 4 degrees C, 25 degrees C, and 40 degrees C for up to 30 days. Furthermore, the method was successfully applied to a pharmacokinetic investigation performed on a healthy volunteer after oral administration of a single 40-mg dose of fluoxetine. Thus, this validated DBS method combines an extractive-derivative single step with a fast and sensitive GC-NICI-MS-MS technique. Using microliter blood samples, this procedure offers a patient-friendly tool in many biomedical fields such as checking treatment adherence, therapeutic drug monitoring, toxicological analyses, or pharmacokinetic studies.

Chemical, physico-chemical and sensory characterization of mixed açai (Euterpe oleracea) and cocoa´s honey (Theobroma cacao) jellies

Four formulations of mixed açaí (Euterpe oleracea) (A) and cocoa´s honey (Theobroma cacao) (CH) jellies were prepared according to the following proportions: T1 (40% A:60% CH), T2 (50% A:50% CH), T3 (60% A: 40% CH) and T4 (100% A - control). All formulations were prepared using a rate 60:40 (w/w) of sucrose and pulp, plus 0.5% pectin and the products reached to average of 65% soluble solids content. The jellies were analyzed by chemical and physicochemical (titratable acidity, pH, soluble solid content, dry matter, total protein, lipids, vitamin C and calories) and sensory characteristics; also were evaluated levels of P, K, Ca, Mg, Fe, Zn, Cu and Mn. It was used a hedonic scale of 7 points to evaluate the attributes: overall impression, spreadability, brightness, flavor, texture and color, and also was verified the purchase intention score. The titratable acidity and pH ranged from 0.46 to 0.64% and 3.35 to 3.64, respectively, that are within the range found at most fruit jellies. The soluble solids content ranged between 65.2 and 65.5 ºBrix. The sensory acceptance results showed that all treatments (T1, T2, T3 and T4) presented means of sensory attributes above 4, demonstrating good acceptance of the product, but the treatment T1 presented the higher scores for the evaluated attributes. Cocoa´s honey added a positive influence on the attributes of color, texture and spreadability.

HBV genotypes and response to tenofovir disoproxil fumarate in HIV/HBV-coinfected persons.

BACKGROUND: Hepatitis B virus (HBV) genotypes can influence treatment outcome in HBV-monoinfected and human immunodeficiency virus (HIV)/HBV-coinfected patients. Tenofovir disoproxil fumarate (TDF) plays a pivotal role in antiretroviral therapy (ART) of HIV/HBV-coinfected patients. The influence of HBV genotypes on the response to antiviral drugs, particularly TDF, is poorly understood. METHODS: HIV/HBV-co-infected participants with detectable HBV DNA prior to TDF therapy were selected from the Swiss HIV Cohort Study. HBV genotypes were identified and resistance testing was performed prior to antiviral therapy, and in patients with delayed treatment response (>6 months). The efficacy of TDF to suppress HBV (HBV DNA <20 IU/mL) and the influence of HBV genotypes were determined. RESULTS: 143 HIV/HBV-coinfected participants with detectable HBV DNA were identified. The predominant HBV genotypes were A (82 patients, 57 %); and D (35 patients, 24 %); 20 patients (14 %) were infected with multiple genotypes (3 % A + D and 11 % A + G); and genotypes B, C and E were each present in two patients (1 %). TDF completely suppressed HBV DNA in 131 patients (92 %) within 6 months; and in 12 patients (8 %), HBV DNA suppression was delayed. No HBV resistance mutations to TDF were found in patients with delayed response, but all were infected with HBV genotype A (among these, 5 patients with genotype A + G), and all had previously been exposed to lamivudine. CONCLUSION: In HIV/HBV-coinfected patients, infection with multiple HBV genotypes was more frequent than previously reported. The large majority of patients had an undetectable HBV viral load at six months of TDF-containing ART. In patients without viral suppression, no TDF-related resistance mutations were found. The role of specific genotypes and prior lamivudine treatment in the delayed response to TDF warrant further investigation.

Testing and Monitoring Mill Connection Messages

Tarve tälle työlle on noussut sanomapalvelinsoveluksissa (servers) esiintyvistä ongelmista. Sanomapalvelinsovelluksia käytetään lähettämään ja vastaanottamaan sanomia paperiteollisuuden myynnin ja jakelun järjestelmässä maantieteellisesti erillään olevista paperiteollisuuden tehtaista. Sanomapalvelinsovelusten kunnollinen toimivuus on tärkeää koko järjestelmän toimivuuden kannalta, koska nämä palvelimet käsittelevät päivittäin tuhansia sanomia, jotka sisältävät merkityksellistä järjestelmätietoa. Tässä työssä on tutkittu mahdollisia toteutustekniikoita ja näihin tutkimuksiin pohjautuen toteutettu työkalut sanomapalvelinsovellusten testaukseen ja valvontaan. Sovellus-arkkituuritekniikoita tutkittaessa tutkimus rajattiin 3-tasoarkkitehtuuritekniikkaan, erityisesti TUXEDOTM -järjestelmätekniikkaan, koska toteutettavaa sovellusta käytetään hajautetussa sovellusympäristössä. Sovellusasiakkaan (client) toteutusta varten tutkittiin ja vertailtiin XML-tekniikkaa ja Microsoft Visual C++ -tekniikkaa käytettynä Tieto-Enatorin Phobos Interaktiivisen C++ -luokkakirjaston kanssa. XML-tekniikoita sekä Visual C++ ja Phobos-luokkakirjasto –tekniikkaa tutkittiin niiltä osin, mitä tarvittiin sanomamerkkijonojen katseluun. XML-tietokantatekniikoita tutkittiin mahdollisena vaihtoehtona tietokanta ja sovelluspalvelintekniikalle. Työn ensimmäisenä tavoitteena oli toteuttaa työkalu sanomapalvelinsovellusten testaamiseen. Toisena tavoitteena oli toteuttaa työkalu sanomien sisällön oikeellisuuden valvontaan. Kolmantena tavoitteena oli analysoida olemassaolevaa sanomavirheiden valvontasovellusta ja kehittää sitä eteenpäin. Diplomityön tuloksena toteutettiin sovellus sanomapalvelinsovellusten testaamiseen ja valvontaan. Tutkituista asiakassovelustekniikoista valittiin toteutus-tekniikaksi MS Visual C++ käytettynä Phobos Interaktiivisen C++ luokkakirjaston kanssa tekniikan tunnettavuuden vuoksi. 3-taso TUXEDOTM-tekniikka valittiin sovelluksen arkkitehtuuriksi. Lisäksi löydettiin parannuksia olemassa oleviin sanoma-virheiden valvontatoimintoihin. Tutkitut toteutustekniikat ovat yleisiä ja niitä voidaan käyttää, kun toteutetaan samanlaisia sovelluksia samanlaisiin sovellusympäristöihin.

Nutrient enrichment and water depth modify consumer control in rocky shore macroalgal communities

The objective of my thesis is to assess mechanisms of ecological community control in macroalgal communities in the Baltic Sea. In the top-down model, predatory fish feed on invertebrate mesograzers, releasing algae partly from grazing pressure. Such a reciprocal relationship is called trophic cascade. In the bottom-up model, nutrients increase biomass in the food chain. The nutrients are first assimilated by algae and, via food chain, increase also abundance of grazers and predators. Previous studies on oceanic shores have described these two regulative mechanisms in the grazer - alga link, but how they interact in the trophic cascades from fish to algae is still inadequately known. Because the top-down and bottom-up mechanisms are predicted to depend on environmental disturbances, such as wave stress and light, I have studied these models at two distinct water depths. There are five factorial field experiments behind the thesis, which were all conducted in the Finnish Archipelago Sea. In all the experiments, I studied macroalgal colonization - either density, filament length or biomass - on submerged colonization substrates. By excluding predatory fish and mesograzers from the algal communities, the studies compared the strength of the top-down control to natural algal communities. A part of the experimental units were, in addition, exposed to enriched nitrogen and phosphorus concentrations, which enabled testing of bottom-up control. These two models of community control were further investigated in shallow (<1 m) and deep (ca. 3 m) water. Moreover, the control mechanisms were also expected to depend on grazer species. Therefore different grazer species were enclosed into experimental units and their impacts on macroalgal communities were followed specifically. The community control in the Baltic rocky shores was found to follow theoretical predictions, which have not been confirmed by field studies before. Predatory fish limited grazing impact, which was seen as denser algal communities and longer algal filaments. Nutrient enrichment increased density and filament length of annual algae and, thus, changed the species composition of the algal community. The perennial alga Fucus vesiculosusA and the red alga Ceramium tenuicorne suffered from the increased nutrient availabilities. The enriched nutrient conditions led to denser grazer fauna, thereby causing strong top-down control over both the annual and perennial macroalgae. The strength of the top-down control seemed to depend on the density and diversity of grazers and predators as well as on the species composition of macroalgal assemblages. The nutrient enrichment led to, however, weaker limiting impact of predatory fish on grazer fauna, because fish stocks did not respond as quickly to enhanced resources in the environment as the invertebrate fauna. According to environmental stress model, environmental disturbances weaken the top-down control. For example, on a wave-exposed shore, wave stress causes more stress to animals close to the surface than deeper on the shore. Mesograzers were efficient consumers at both the depths, while predation by fish was weaker in shallow water. Thus, the results supported the environmental stress model, which predicts that environmental disturbance affects stronger the higher a species is in the food chain. This thesis assessed the mechanisms of community control in three-level food chains and did not take into account higher predators. Such predators in the Baltic Sea are, for example, cormorant, seals, white-tailed sea eagle, cod and salmon. All these predatory species were recently or are currently under intensive fishing, hunting and persecution, and their stocks have only recently increased in the region. Therefore, it is possible that future densities of top predators may yet alter the strengths of the controlling mechanisms in the Baltic littoral zone.

Relationship between sedimentation sign and morphological grade in symptomatic lumbar spinal stenosis.

PURPOSE: We aimed to study the relationship between two morphological parameters recently described on MRI images in relation to lumbar spinal stenosis (LSS): the first is the sedimentation sign (SedS) and the second is the morphological grading of lumbar stenosis. MATERIALS AND METHODS: MRIs from a total of 137 patients were studied. From those, 110 were issued from a prospective database of symptomatic LSS patients, of whom 73 were treated surgically and 37 conservatively based on symptom severity. A third group consisting of 27 subjects complaining of low back pain (LBP) served as control. Severity of stenosis was judged at disc level using the four A to D grade morphological classification. The presence of a SedS was judged at pedicle level, above or below the site of maximal stenosis. RESULTS: A positive SedS was observed in 58, 69 and 76 % of patients demonstrating B, C and D morphology, respectively, but in none with grade A morphology. The SedS was positive in 67 and 35 % of the surgically and conservatively treated patients, respectively, and in 8 % of the LBP group. C and D morphological grades were present in 97 and 35 % of patients in the surgically and conservatively treated group, respectively, and in 18 % of the LBP group. Presence of a positive SedS carried an increased risk of being submitted to surgery in the symptomatic LSS group (OR 3.5). This risk was even higher in the LSS patients demonstrating grade C or D morphology (OR 65). DISCUSSION AND CONCLUSION: One-third of surgically treated LSS patients do not present a SedS. This sign appears to be a lesser predictor of treatment modality in our setting of symptomatic LSS patients compared to the severity of stenosis judged by the morphological grade.

Genetic variation in the European hake, Merluccius merluccius. Description of protein loci and genetic divergence between Atlantic and Mediterranean populations = Anàlisi de la variabilitat genètica en el lluç europeu, Merluccius merluccius. Descripció dels loci electroforètics i divergència genètica entre les poblacions atlàntica i mediterrània

We examined the genetic population structure of the european hake (Merluccius merluccius) using electrophoretically detectable population markers in 35 protein loci. Samples were collected from 7 locations in the Atlantic Ocean and Mediterranean Sea. Six loci were polymorphic using the 0.05 criterion of polymorphism. Sample heterozigosities ranged from 0.052 to 0.072 and averaged 0.0625. In this study, significant allele frequency differences were detected between Atlantic and Mediterranean populations in three polymorphic loci: GAPDH-1*, GPI-2* and SOD-1*. Two major genetic groups were considered: a North-Atlantic stock and the Mediterranean stock. The Nei genetic distance, D, (based on 33 loci) between samples from these two groups ranged from 0.002 to 0.006. Genetic differenciation between these areas appears to reflect the barrier effect of Strait of Gibraltar. On average over loci, 96.92 % of the total gene diversity was contained within samples, 0.23 % expressed differences among locations within areas, and 2.64 % differences between regions. A review of morphological variation together with the genetic data presented here suggest that the populations of hake from these areas are subdivided into two different stocks: the North-Atlantic stock and the Mediterranean stock. The most conservative approach to the management of these stocks is to consider the Atlantic and Mediterranean stocks independently from oneanother

A short screener is valid for assessing mediterranean diet adherence among older spanish men and women

Ensuring the accuracy of dietary assessment instruments is paramount for interpreting diet-disease relationships. The present study assessed the relative and construct validity of the 14-point Mediterranean Diet Adherence Screener (MEDAS) used in the Prevencio´n con Dieta Mediterra´nea (PREDIMED) study, a primary prevention nutrition-intervention trial. A validated FFQ and the MEDAS were administered to 7146 participants of the PREDIMED study. The MEDASderived PREDIMED score correlated significantly with the corresponding FFQ PREDIMED score (r = 0.52; intraclass correlation coefficient = 0.51) and in the anticipated directions with the dietary intakes reported on the FFQ. Using Bland Altman"s analysis, the average MEDAS Mediterranean diet score estimate was 105% of the FFQ PREDIMED score estimate. Limits of agreement ranged between 57 and 153%. Multiple linear regression analyses revealed that a higher PREDIMED score related directly (P , 0.001) to HDL-cholesterol (HDL-C) and inversely (P , 0.038) to BMI, waist circumference, TG, the TG:HDL-C ratio, fasting glucose, and the cholesterol:HDL-C ratio. The 10-y estimated coronary artery disease risk decreased as the PREDIMED score increased (P , 0.001). The MEDAS is a valid instrument for rapid estimation of adherence to the Mediterranean diet and may be useful in clinical practice.

A short screener is valid for assessing mediterranean diet adherence among older spanish men and women

Ensuring the accuracy of dietary assessment instruments is paramount for interpreting diet-disease relationships. The present study assessed the relative and construct validity of the 14-point Mediterranean Diet Adherence Screener (MEDAS) used in the Prevencio´n con Dieta Mediterra´nea (PREDIMED) study, a primary prevention nutrition-intervention trial. A validated FFQ and the MEDAS were administered to 7146 participants of the PREDIMED study. The MEDASderived PREDIMED score correlated significantly with the corresponding FFQ PREDIMED score (r = 0.52; intraclass correlation coefficient = 0.51) and in the anticipated directions with the dietary intakes reported on the FFQ. Using Bland Altman"s analysis, the average MEDAS Mediterranean diet score estimate was 105% of the FFQ PREDIMED score estimate. Limits of agreement ranged between 57 and 153%. Multiple linear regression analyses revealed that a higher PREDIMED score related directly (P , 0.001) to HDL-cholesterol (HDL-C) and inversely (P , 0.038) to BMI, waist circumference, TG, the TG:HDL-C ratio, fasting glucose, and the cholesterol:HDL-C ratio. The 10-y estimated coronary artery disease risk decreased as the PREDIMED score increased (P , 0.001). The MEDAS is a valid instrument for rapid estimation of adherence to the Mediterranean diet and may be useful in clinical practice.

Capillary thermal desorption unit for near real-time analysis of VOCs at sub-trace levels. Application to the analysis of environmental air contamination and breath samples

A capillary microtrap thermal desorption module is developed for near real-time analysis of volatile organic compounds (VOCs) at sub-ppbv levels in air samples. The device allows the direct injection of the thermally desorbed VOCs into a chromatographic column. It does not use a second cryotrap to focalize the adsorbed compounds before entering the separation column so reducing the formation of artifacts. The connection of the microtrap to a GC–MS allows the quantitative determination of VOCs in less than 40 min with detection limits of between 5 and 10 pptv (25 °C and 760 mmHg), which correspond to 19–43 ng m−3, using sampling volumes of 775 cm3. The microtrap is applied to the analysis of environmental air contamination in different laboratories of our faculty. The results obtained indicate that most volatile compounds are easily diffused through the air and that they also may contaminate the surrounding areas when the habitual safety precautions (e.g., working under fume hoods) are used during the manipulation of solvents. The application of the microtrap to the analysis of VOCs in breath samples suggest that 2,5-dimethylfuran may be a strong indicator of a person's smoking status

Interação de compostos organossulfurados derivados do alho com o citocromo-c: um estudo eletroquímico

Organosulfur compounds present in garlic and onion have been evaluated as inhibitors of chemical carcinogenesis. Among them diallylsulfide was mainly investigated and studies demonstrated its metabolization to the corresponding sulfoxide and sulfone. In this work, we report the investigation of the interaction between the diallylsulfide and its oxidized derivatives, through cyclic voltammetry, with horse heart cytocrome-c (on a modified electrode with 4-mercaptopyridine). Our results suggest that there is a reversible interaction between cytocrome-c and diallylsulfide and diallylsulfone and an irreversible interaction with the diallylsulfoxide.

Reaction Kinetics and Viscosity Modelling in the Fusion Syntheses of Ca- and Ca/Mg-resinates

Rosin is a natural product from pine forests and it is used as a raw material in resinate syntheses. Resinates are polyvalent metal salts of rosin acids and especially Ca- and Ca/Mg- resinates find wide application in the printing ink industry. In this thesis, analytical methods were applied to increase general knowledge of resinate chemistry and the reaction kinetics was studied in order to model the non linear solution viscosity increase during resinate syntheses by the fusion method. Solution viscosity in toluene is an important quality factor for resinates to be used in printing inks. The concept of critical resinate concentration, c crit, was introduced to define an abrupt change in viscosity dependence on resinate concentration in the solution. The concept was then used to explain the non-inear solution viscosity increase during resinate syntheses. A semi empirical model with two estimated parameters was derived for the viscosity increase on the basis of apparent reaction kinetics. The model was used to control the viscosity and to predict the total reaction time of the resinate process. The kinetic data from the complex reaction media was obtained by acid value titration and by FTIR spectroscopic analyses using a conventional calibration method to measure the resinate concentration and the concentration of free rosin acids. A multivariate calibration method was successfully applied to make partial least square (PLS) models for monitoring acid value and solution viscosity in both mid-infrared (MIR) and near infrared (NIR) regions during the syntheses. The calibration models can be used for on line resinate process monitoring. In kinetic studies, two main reaction steps were observed during the syntheses. First a fast irreversible resination reaction occurs at 235 °C and then a slow thermal decarboxylation of rosin acids starts to take place at 265 °C. Rosin oil is formed during the decarboxylation reaction step causing significant mass loss as the rosin oil evaporates from the system while the viscosity increases to the target level. The mass balance of the syntheses was determined based on the resinate concentration increase during the decarboxylation reaction step. A mechanistic study of the decarboxylation reaction was based on the observation that resinate molecules are partly solvated by rosin acids during the syntheses. Different decarboxylation mechanisms were proposed for the free and solvating rosin acids. The deduced kinetic model supported the analytical data of the syntheses in a wide resinate concentration region, over a wide range of viscosity values and at different reaction temperatures. In addition, the application of the kinetic model to the modified resinate syntheses gave a good fit. A novel synthesis method with the addition of decarboxylated rosin (i.e. rosin oil) to the reaction mixture was introduced. The conversion of rosin acid to resinate was increased to the level necessary to obtain the target viscosity for the product at 235 °C. Due to a lower reaction temperature than in traditional fusion synthesis at 265 °C, thermal decarboxylation is avoided. As a consequence, the mass yield of the resinate syntheses can be increased from ca. 70% to almost 100% by recycling the added rosin oil.

Calculation of the critical crack size for cold form rectangular hollow section tube (CRHS) under bending load at -40º C temperature

To predict the capacity of the structure or the point which is followed by instability, calculation of the critical crack size is important. Structures usually contain several cracks but not necessarily all of these cracks lead to failure or reach the critical size. So, defining the harmful cracks or the crack size which is the most leading one to failure provides criteria for structure’s capacity at elevated temperature. The scope of this thesis was to calculate fracture parameters like stress intensity factor, the J integral and plastic and ultimate capacity of the structure to estimate critical crack size for this specific structure. Several three dimensional (3D) simulations using finite element method by Ansys program and boundary element method by Frank 3D program were carried out to calculate fracture parameters and results with the aid of laboratory tests (loaddisplacement curve, the J resistance curve and yield or ultimate stress) leaded to extract critical size of the crack. Two types of the fracture which is usually affected by temperature, Elastic and Elasti-Plastic fractures were simulated by performing several linear elastic and nonlinear elastic analyses. Geometry details of the weldment; flank angle and toe radius were also studied independently to estimate the location of crack initiation and simulate stress field in early stages of crack extension in structure. In this work also overview of the structure’s capacity in room temperature (20 ºC) was studied. Comparison of the results in different temperature (20 ºC and -40 ºC) provides a threshold of the structure’s behavior within the defined range.

Detailed crystallization study of co-precipitated Y1.47Gd1.53Fe5O12 and relevant magnetic properties

The crystallization process of co-precipitated Y1.5Gd1.5Fe5O12 powder heated up to 1000 ºC at rate of 5 °C min-1 was investigated. Above 810 ºC crystalline Y1.47Gd1.53Fe5O12 was obtained with a lattice parameter of 12.41 Å and a theoretical density of 5.84 g cm-3. Dry pressed rings were sintered at 1270 and 1320 ºC, increasing the grain-size from 3.1 to 6.5 µm, the theoretical density by 87.6 to 95.3% and decreasing Hc from 2.9725 to 1.4005 Oe. Additionally, Hc increased when the frequency of the hysteresis graph varied from 60 Hz to 10 kHz, the curie temperature was 282.4 ºC and Ms equalled 9.25 emu g-1 (0.17 kG) agreeing well with the Bs-value of the hysteresis graph and literature values.

Mineral and vitamin content of beef, chicken, and turkey hydrolysates mineral and vitamin content of protein hydrolysates

The purpose of this study was to assess the concentration of vitamins and minerals in meat protein hydrolysates. Calcium, phosphorus and iron were analyzed by inductively coupled-plasma atomic emission spectrophotometry; vitamin C was analyzed by the reduction of cupric ions and vitamins B1 and B2 by fluorescence. Regarding minerals, the beef hydrolysate (BH) had more iron than the turkey hydrolysate (TH) and the chicken hydrolysate (CH); TH had a little more phosphorus. BH had the largest amount of vitamin C, and similar amounts of vitamins B1 and B2. The amount of these nutrients found in the hydrolysates suggests that it is possible to use them to enrich special dietary formulations.