Síntesi i estructura de lligands hexaazamacrocíclics i dels seus complexos de Zn. Estudis de catàlisi i de fenòmens de reconeixement molecular amb substrats aniònics

Es realitza una breu introducció a la Química Supramolecular, la qual estudia les estructures i funcions de les associacions que resulten de la unió d'espècies moleculars a través d'enllaços intermoleculars, no covalents. El reconeixement molecular, reactivitat i transport són les funcions bàsiques de les espècies supramoleculars. El present treball tracta de la química supramolecular d'anions i del potential efecte catalític de complexos de Zinc amb lligands hexaazamacrocilics en reaccions de hidròlisis d'esters de fosfat. Els lligands descrits en aquest treball són lligands macrocíclics hexadentats formats per amines secundàries o terciàries enllaçades a cadenes alquíliques de dos o tres àtoms de carbonis formant dos braços, que estan unides per un espaiador, El conjunt de lligands que s'estudien permeten estudiar els diferents factors, geomètrics, electrònics i estèrics que controlen els fenòmens de reconeixement molecular. El treball descriu en detall els procediments de síntesi i la caracterització d'aquest conjunt de lligands. S'ha realitzat un estudi sistemàtic dels diferents factors que afecten als fenòmens de reconeixement molecular entre lligands macrocíclics (L), descrits anteriorment i substrats aniònics (S): fosfats, polifosfats i dicarboxilats. Els estudis s'han realitzat tant en dissolució aquosa, a partir de mesures potenciomètriques, com en estat sòlid per difracció de Raig-X a partir de la obtenció de les estructures cristal·lines dels complexos. La força de l'enllaç en els complexos ternaris H:L:S es racionalitza en termes d'enllaç per pont d'hidrogen, interaccions electrostàtiques i interaccions per -Stacking. Així mateix es racionalitza la importància de les dimensions i forma de la cavitat en el grau d'interacció. Actualment hi ha un gran interès en l'estudi del paper que juguen els ions metàl·lics en el centre actiu dels metal·loenzims hidrolítics tal com la carboxipeptidasa, que catalitza la hidròlisi d'aminoàcids C-terminals de substrats polipeptídics, l'anhidrasa carbònica, que catalitza la reacció d'hidratació del CO2 per donar hidrogencarbonat, la fosfatasa alcalina, que actua catalitzant la hidròlisi no específica de monoesters de fosfats a pH alcalí. El Zn(II) és un metall que es troba sovint formant part dels centres actius dels metal·loenzims i és el segon element de transició més abundant en els organismes vius. Per aquest motiu són útils els models sintètics que puguin actuar com a mimetitzadors de reaccions bioinorgàniques en les que els metal·loenzims juguen un paper com a catalitzadors. Els models sintètics són complexos de metalls de transició formats per un lligand o lligands en el seu entorn de coordinació més immediat que tinguin efectes electrònics i estèrics els més similar possible als que es produeixen en el centre actiu dels enzims. Donat la importància dels complexos de Zn(II) com a models biomimètics de metal·loenzims hidrolítics, s'han sintetitzat i caracteritzat complexos dinuclears de Zn(II) amb lligands hexaazamacrocíclics descrits anteriorment. S'ha realitzat un estudi de la seva activitat catalítica en la hidròlisi d'un ester activat, l'acetat de p-nitrofenil, un substrat característic que s'utilitza per analitzar l'activitat catalítica dels models biomimètics.

A gestão do risco nas empresas : comparação das práticas de gestão do risco, no setor da construção em Portugal e no Reino Unido

O risco faz parte do dia a dia das organizações e atualmente mais do que nunca deve ser gerido de uma forma consciente. As organizações como forma de transparência na divulgação da informação para os investidores e outras partes interessadas, devem expor as suas políticas de risco e a forma como pretendem alcançar os objetivos que se propõem numa ótica de continuidade e sustentabilidade. Os mercados globais com grande complexidade e forte concorrência levam a que as empresas se afirmem pela sua capacidade de organização. No setor da construção a dispersão geográfica das obras e a correspondente dispersão dos ativos de produção, os concursos públicos e a apresentação de preço assumem especial relevância em termos de análise de risco. Atualmente na matéria da gestão do risco existem várias recomendações ao nível do governo das sociedades e vários modelos que servem de guião para as empresas implementarem na sua gestão do risco. A estrutura conceptual mais atual e considerada o ‘state of the art’ na matéria de gestão do risco é a ISO 31000 Risk management – Principles and Guidelines. Esta norma pretende definir princípios que permitam a cada organização desenvolver um modelo feito à medida, ajustado aos seus processos e alinhado com a sua estratégia.

As migrações : uma leitura política e uma visão humanista

Ao ter como base geral de pesquisa – A Europa diante do fenómeno migratório - a procura de uma nova Humanização – o objectivo deste trabalho consistiu na análise de algumas formas de manifestação e do impacto deste fenómeno nas sociedades democráticas inseridas nesse espaço. A consciência que as migrações têm seguido a história do mundo e as civilizações e que a sua análise permite avaliar o destino de seres humanos que partem em busca de soluções para as suas vidas. A convicção que a configuração das migrações tem um amplo significado social, cultural e económico e que uma política de imigração fechada, repressiva ou redutora do seu verdadeiro significado pode dividir a Humanidade. O receio que gera a continuidade de uma visão unilateral do Mundo e o esquecimento das condições existenciais difíceis de alguns países de emigração. A renúncia de alguns em escutar um discurso carecido de autenticidade e em apoiar um diálogo comprometido com alguns pressupostos ideológicos pouco claros. O desejo de participar na denúncia da propagação de atitudes facilitadoras dos sentimentos racistas e xenófobos. O repúdio pelo desnorteamento ontológico traduzido pela defesa de certas atitudes persecutórias infringidas aos imigrantes clandestinos. A adopção de uma política basicamente norteada pelo controlo das fronteiras e pela exploração económica dos imigrantes. A indignação pelo esquecimento ou negligência na vigilância e aplicação dos direitos fundamentais, em concreto, o direito ao uso da liberdade, a uma vida familiar normal, situações que lesam muitos. Foram, em suma, as razões que motivaram o trabalho. Porque, igualmente o exercício da cidadania e a inserção num espaço mundial em transformação requerem a actualização da leitura das relações dos homens entre eles e com as formas espaciais; porque o papel dos imigrantes na economia contemporânea é sentido como algo fundamental, e também a importância do seu lugar na estratégia de um desenvolvimento sustentável deve ser demonstrada e respeitada, desejou-se partilhar com outros a oportunidade de defender a participação colectiva sob princípios e premissas mais humanistas, e considerados fundamentais, para a construção de uma política de imigração digna, mais abrangente e indutora de pontes abertas e não de áreas amuralhadas.

Pintar la nación indígena como una estrategia modernista en la obra de Eduardo Kingman (Dossier: historia del arte)

Este estudio centra su análisis en la obra pictórica de Eduardo Kingman como un modelo para describir los enfoques, tendencias e ideología que caracterizaron al Indigenismo. Esta corriente artística reunió a pintores, escritores e intelectuales ecuatorianos durante la década de 1930. El artículo propone que esta corriente surgió como una reacción al academicismo predominante en los salones y escuelas de arte. El estudio hace una revisión de las exposiciones, bienales y concursos en los que Kingman participó.Analiza las influencias artísticas y literarias reflejadas en la obra de este autor,sus relaciones con el Grupo de Guayaquil y su vinculación al Sindicato de Escritores y Artistas del Ecuador (SEA). Finalmente, recoge la opinión y reacción a su producción pictórica por parte de escritores, intelectuales y prensa en general.

Improving flood models using LiDAR: progress and problems

Airborne scanning laser altimetry (LiDAR) is an important new data source for river flood modelling. LiDAR can give dense and accurate DTMs of floodplains for use as model bathymetry. Spatial resolutions of 0.5m or less are possible, with a height accuracy of 0.15m. LiDAR gives a Digital Surface Model (DSM), so vegetation removal software (e.g. TERRASCAN) must be used to obtain a DTM. An example used to illustrate the current state of the art will be the LiDAR data provided by the EA, which has been processed by their in-house software to convert the raw data to a ground DTM and separate vegetation height map. Their method distinguishes trees from buildings on the basis of object size. EA data products include the DTM with or without buildings removed, a vegetation height map, a DTM with bridges removed, etc. Most vegetation removal software ignores short vegetation less than say 1m high. We have attempted to extend vegetation height measurement to short vegetation using local height texture. Typically most of a floodplain may be covered in such vegetation. The idea is to assign friction coefficients depending on local vegetation height, so that friction is spatially varying. This obviates the need to calibrate a global floodplain friction coefficient. It’s not clear at present if the method is useful, but it’s worth testing further. The LiDAR DTM is usually determined by looking for local minima in the raw data, then interpolating between these to form a space-filling height surface. This is a low pass filtering operation, in which objects of high spatial frequency such as buildings, river embankments and walls may be incorrectly classed as vegetation. The problem is particularly acute in urban areas. A solution may be to apply pattern recognition techniques to LiDAR height data fused with other data types such as LiDAR intensity or multispectral CASI data. We are attempting to use digital map data (Mastermap structured topography data) to help to distinguish buildings from trees, and roads from areas of short vegetation. The problems involved in doing this will be discussed. A related problem of how best to merge historic river cross-section data with a LiDAR DTM will also be considered. LiDAR data may also be used to help generate a finite element mesh. In rural area we have decomposed a floodplain mesh according to taller vegetation features such as hedges and trees, so that e.g. hedge elements can be assigned higher friction coefficients than those in adjacent fields. We are attempting to extend this approach to urban area, so that the mesh is decomposed in the vicinity of buildings, roads, etc as well as trees and hedges. A dominant points algorithm is used to identify points of high curvature on a building or road, which act as initial nodes in the meshing process. A difficulty is that the resulting mesh may contain a very large number of nodes. However, the mesh generated may be useful to allow a high resolution FE model to act as a benchmark for a more practical lower resolution model. A further problem discussed will be how best to exploit data redundancy due to the high resolution of the LiDAR compared to that of a typical flood model. Problems occur if features have dimensions smaller than the model cell size e.g. for a 5m-wide embankment within a raster grid model with 15m cell size, the maximum height of the embankment locally could be assigned to each cell covering the embankment. But how could a 5m-wide ditch be represented? Again, this redundancy has been exploited to improve wetting/drying algorithms using the sub-grid-scale LiDAR heights within finite elements at the waterline.

Dog in a doublet bridge reconstruction: a case study

Dog-in-a-Doublet Bridge Reconstruction Scheme integrates the interdisciplinary design to provide solution for different needs: to provide a crossing to carry the new 40-tonne loading requirement, to improve the visibility of the substandard junction, and within the funding available. The management of the project involves the co-ordination of different authorities, statutory undertakers and other bodies. At certain stages, there were negotiations with RSPB on the restriction of construction period from July to November. After the re-assessment of the environmental impact of the construction on the breeding and wintering birds, the restrict was waived. As the bid for the assessment, strengthening and structural maintenance of bridges in the Cambridgeshire County Council Transport Policies and Programme No. 21 (1995/96) for Dog-in-a-Doublet Bridge Reconstruction Schemes was unsuccessful to attract the Transport Supplement Grant (TSG). A series of temporary measures had to be undertaken until funding is available for its replacement.

Preparation and properties of gallaborane, GaBH6: structure of the gaseous molecule H2Ga(μ-H)2BH2 as determined by vibrational, electron diffraction, and ab initio studies, and structure of the crystalline solid at 110 K as determined by x-ray diffraction``

Gallaborane (GaBH6, 1), synthesized by the metathesis of LiBH4 with [H2GaCl]n at ca. 250 K, has been characterized by chemical analysis and by its IR and 1H and 11B NMR spectra. The IR spectrum of the vapor at low pressure implies the presence of only one species, viz. H2Ga(μ-H)2BH2, with a diborane-like structure conforming to C2v symmetry. The structure of this molecule has been determined by gas-phase electron diffraction (GED) measurements afforced by the results of ab initio molecular orbital calculations. Hence the principal distances (rα in Å) and angles ( α in deg) are as follows: r(Ga•••B), 2.197(3); r(Ga−Ht), 1.555(6); r(Ga−Hb), 1.800(6); r(B−Ht), 1.189(7); r(B−Hb), 1.286(7); Hb−Ga−Hb, 71.6(4); and Hb−B−Hb, 110.0(5) (t = terminal, b = bridging). Aggregation of the molecules occurs in the condensed phases. X-ray crystallographic studies of a single crystal at 110 K reveal a polymeric network with helical chains made up of alternating pseudotetrahedral GaH4 and BH4 units linked through single hydrogen bridges; the average Ga•••B distance is now 2.473(7) Å. The compound decomposes in the condensed phases at temperatures exceeding ca. 240 K with the formation of elemental Ga and H2 and B2H6. The reactions with NH3, Me3N, and Me3P are also described.

Body mass, territory size and life history tactics in a socially monogamous canid, the red fox Vulpes vulpes

Male-biased sexual size dimorphism is typical of polygynous mammals, where the degree of dimorphism in body mass is related to male intrasexual competition and the degree of polygyny. However, the importance of body mass in monogamous mammals is largely unknown. We investigated the effect of body mass on life-history parameters and territory size in the red fox (Vulpes vulpes), a socially monogamous canid with slight sexual dimorphism. Increased body size in males appeared to confer an advantage in territory acquisition and defense contests because heavier males held larger territories and exerted a greater boundary pressure on smaller neighbors. Heavier male foxes invested more effort in searching for extrapair matings by moving over a wider area and farther from their territories, leading to greater reproductive success. Males that sired cubs outside their own social group appeared to be heavier than males that only sired cubs within their social group or that were cuckolded, but our results should be treated with caution because sample sizes were small. Territory size, boundary pressure, and paternity success were not related to age of males. In comparison, body mass of females was not related to territory size, probability of breeding, litter size, or cub mass. Only age affected probability of breeding in females: younger females reproduced significantly less than did older females, although we did not measure individual nutritional status. Thus, body mass had a significant effect on life-history traits and territory size in a socially monogamous species comparable to that reported in polygynous males, even in the absence of large size dimorphism.

Fighting strategies in two species of fig wasp

Although theory exists concerning the types of strategies that should be used in contests over resources, empirical work explicitly testing its predictions is relatively rare. We investigated male fighting strategies in two nonpollinating. g wasp species associated with Ficus rubiginosa figs. In Sycoscapter sp. A, males did not assess each other before or during fights over mating opportunities. Instead,fights continued until the loser reached an energetic cost threshold that was positively correlated with its body size (fighting ability) and retreated. In Philotrypesis sp. B, pre fight assessment was indicated, with males attacking competitively inferior rivals to remove them from the competitor pool ( they then continued to do so until they reached a cost threshold that was again positively correlated with body size). Using data on species ecology, we discuss our findings with respect to theory on when different fighting strategies should evolve. We argue that the type of strategy used by a. g wasp species is determined by its relative benefits in terms of inclusive fitness. (c) 2008 The Association for the Study of Animal Behaviour. Published by Elsevier Ltd. All rights reserved.

Amino acid pairing preferences in parallel beta-sheets in proteins

Statistical approaches have been applied to examine amino acid pairing preferences within parallel beta-sheets. The main chain hydrogen bonding pattern in parallel beta-sheets means that, for each residue pair, only one of the residues is involved in main chain hydrogen bonding with the strand containing the partner residue. We call this the hydrogen bonded (HB) residue and the partner residue the non-hydrogen bonded (nHB) residue, and differentiate between the favorability of a pair and that of its reverse pair, e.g. Asn(HB)-Thr(nHB)versus Thr(HB)-Asn(nHB). Significantly (p < or = 0.000001) favoured pairings were rationalised using stereochemical arguments. For instance, Asn(HB)-Thr(nHB) and Arg(HB)-Thr(nHB) were favoured pairs, where the residues adopted favoured chi1 rotamer positions that allowed side-chain interactions to occur. In contrast, Thr(HB)-Asn(nHB) and Thr(HB)-Arg(nHB) were not significantly favoured, and could only form side-chain interactions if the residues involved adopted less favourable chi1 conformations. The favourability of hydrophobic pairs e.g. Ile(HB)-Ile(nHB), Val(HB)-Val(nHB) and Leu(HB)-Ile(nHB) was explained by the residues adopting their most preferred chi1 and chi2 conformations, which enabled them to form nested arrangements. Cysteine-cysteine pairs are significantly favoured, although these do not form intrasheet disulphide bridges. Interactions between positively and negatively charged residues were asymmetrically preferred: those with the negatively charged residue at the HB position were more favoured. This trend was accounted for by the presence of general electrostatic interactions, which, based on analysis of distances between charged atoms, were likely to be stronger when the negatively charged residue is the HB partner. The Arg(HB)-Asp(nHB) interaction was an exception to this trend and its favorability was rationalised by the formation of specific side-chain interactions. This research provides rules that could be applied to protein structure prediction, comparative modelling and protein engineering and design. The methods used to analyse the pairing preferences are automated and detailed results are available (http://www.rubic.rdg.ac.uk/betapairprefsparallel/).

Amino acid pairing preferences in parallel beta-sheets in proteins

Statistical approaches have been applied to examine amino acid pairing preferences within parallel beta-sheets. The main chain hydrogen bonding pattern in parallel beta-sheets means that, for each residue pair, only one of the residues is involved in main chain hydrogen bonding with the strand containing the partner residue. We call this the hydrogen bonded (HB) residue and the partner residue the non-hydrogen bonded (nHB) residue, and differentiate between the favourability of a pair and that of its reverse pair, e.g. Asn(HB)-Thr(nHB) versus Thr(HB)-Asn(nHB). Significantly (p <= 0.000001) favoured pairings were rationalised using stereochemical arguments. For instance, Asn(HB)-Thr(nHB) and Arg(HB)-Thr(nHB) were favoured pairs, where the residues adopted favoured chi(1) rotamer positions that allowed side-chain interactions to occur. In contrast, Thr(HB)-Asn(nHB) and Thr(HB)-Arg(nHB) were not significantly favoured, and could only form side-chain interactions if the residues involved adopted less favourable chi(1) conformations. The favourability of hydrophobic pairs e.g. Ile(HB)-Ile(nHB), Val(HB)-Val(nHB) and Leu(HB)-Ile(nHB) was explained by the residues adopting their most preferred chi(1) and chi(2) conformations, which enabled them to form nested arrangements. Cysteine-cysteine pairs are significantly favoured, although these do not form intrasheet disulphide bridges. Interactions between positively and negatively charged residues were asymmetrically preferred: those with the negatively charged residue at the HB position were more favoured. This trend was accounted for by the presence of general electrostatic interactions, which, based on analysis of distances between charged atoms, were likely to be stronger when the negatively charged residue is the HB partner. The Arg(HB)-Asp(nHB) interaction was an exception to this trend and its favourability was rationalised by the formation of specific side-chain interactions. This research provides rules that could be applied to protein structure prediction, comparative modelling and protein engineering and design. The methods used to analyse the pairing preferences are automated and detailed results are available (http:// www.rubic.rdg.ac.uk/betapairprefsparallel/). (c) 2005 Elsevier Ltd. All rights reserved.

Molybdenum eta(3)-allyl dicarbonyl complexes as a new class of precursors for highly reactive epoxidation catalysts with tert-butyl hydroperoxide

New Mo(II) diimine derivatives of [Mo(q (3)allyl)X(CO)(2)(CH3CN)(2)] (allyl = C3H5 and C5H5O; X = Cl, Br) were prepared, and [MO(eta(3)-C3H5)Cl(CO)(2)(BIAN)] (BIAN = 1,4-(4-chloro)phenyl-2,3-naphthalene-diazabutadiene) (7) was structurally characterized by single-crystal X-ray diffraction. This complex adopted an equatorial-axial arrangement of the bidentate ligand (axial isomer), in contrast with the precursors, found as the equatorial isomer in the solid and fluxional in solution. The new complexes of the type [Mo(eta(3)-allyl)X(CO)(2)(N-N)l (N-N is a bidentate chelating dinitrogen ligand) were tested for the catalytic epoxidation of cyclooctene using tert-butyl hydroperoxide as oxidant. All catalytic systems were 100% selective toward epoxide formation. While their turnover frequencies paralleled those of related Mo(eta) carbonyl compounds or Mo(VI) compounds bearing similar N-donor ligands, they exhibited similar olefin conversions in consecutive catalytic runs. The acetonitrile precursors were generally more active than the diimine complexes, and the chloro derivatives more active than the bromo ones. Combined vibrational and NMR spectroscopy and computational studies (DFT) were used to investigate the nature of the molybdenum species formed in the catalytic system with [Mo(eta(3)-C3H5)Cl(CO)(2){1,4-(2,6-dimethyl)phenyl-2.3-dimethyldiazabuta diene}] (4) and to propose that the resulting species may be dimeric bearing oxide bridges.

Construction of coordination polymers of cadmium(II) with mixed hexamethylenetetramine and terephthalate or thiocyanate ligands

Three new polymeric complexes [Cd(hmt)(SCN)(2)(H2O)(2)](n) (1), [Cd-3(mu(2)-hmt)(2)(SCN)(6)(H2O)(2)](n) (2), and [Cd-2(hmt)(2)(tP)(2)(H2O)(6)](n) (3) [hmt = hexamethylenetetramine, tp = terephthalate] have been synthesized and characterized by single crystal X-ray diffraction. Both the compounds 1 and 2 are 1-D polymers where Cd units are linked by double end-to-end thiocyanate bridges but in 2 the chain is wider containing three cadmium atoms instead of one as found in 1. In both compounds the coordination environment around cadmium atom is distorted octahedral. Compound 3 is a three-dimensional polymer having water-filled microporous channels. Both tp and brut are mu(2)-bridged. One of the acid groups of tp is coordinated in chelating bidentate and the other in monodentate fashion. Half of its Cd atoms are hexa-coordinated and the rest are hepta-coordinated. Thermogravimetric analysis and X-ray diffraction study of 3 show that its framework remains intact upon removal of water molecules. The flexibility of coordination number around cadmium atoms (six or seven) probably plays an important role in establishing the rigidity of the framework. (C) 2003 Elsevier Ltd. All rights reserved.

Syntheses, conformations, and basicities of bicyclic triamines

The multistep syntheses of several bicyclic triamines are described, all of which have an imbedded 1,5,9-triazacyclododecane ring. In 1,5,9-triazabicyclo[7.3.3]pentadecanes 12, 13, 15, and 16, two nitrogens are bridged by three carbons. The monoprotonated forms of these triamines are highly stabilized by a hydrogen-bonded network involving the bridge and both bridgehead nitrogens, producing a difference of more than 8 pK(a) units in acidities of their monoprotonated and diprotonated forms. The one- and zero-carbon bridges in 1,5,9-triazabicyclo[9.1.1]tridecane (23) and 7-methyl-1,5,9-triazabicyclo[5.5.0]dodecane (39) do not enhance the stabilities of their monoprotonated forms. X-ray crystal structures and computational studies of 12.HI and 16.HI reveal similar, but somewhat weaker, hydrogen-bonded networks, relative to 15.HI. The activation free energies for conformational inversion of 13.HI (14.4 +/- 0.2 kcal/mol), 16.HI (15.0 +/- 0.1 kcal/mol) and 16 (8.8 +/- 0.3 kcal/mol) were measured by variable-temperature H-1 and C-13 NMR spectroscopy. These experimental barriers give an estimate of 6.2 kcal/mol for the strength of the bifurcated hydrogen bond between the bridge nitrogen and cavity proton in 16.HI. Computational studies support the hypothesis that N-inversion occurs in an open conformation, leading to an estimate of 10.32 kcal/mol for the enthalpy of the bifurcated hydrogen bond in 16.HI in the gas phase.