A wider choice of construction materials for the modern fishing boats

An account of fishing vessel construction materials is given, with information on essential features, and a material account. Materials discussed in detail are steel, wood, aluminium, glass reinforced plastic, and ferro-cement.

Comparative efficiency of different surfaces for drying fish

The efficiency of four different drying surfaces, namely, cement platform, palmyrah leaf mat, aluminum tray and stretched net for drying fish were studied using sciaenids, mullet and perch. All the drying surfaces were found to be equally efficient. The cheaper and locally available palmyrah leaf mat or stretched net can replace costly cement platform and aluminium tray for efficient drying of fish.

Design, development, and evaluation of a simple blackbody radiative source

This paper presents a simple design and the testing of a blackbody prototype. The physical properties and geometry of the cavity produce a radiator or blackbody with an emissivity greater than 0.99. The prototype has the advantages of having a traditional spherical cavity made of alumina refractory cement and a radiative emission very close to that of an ideal blackbody. The prototype can be used as a calibration standard for other radiation measuring instruments or sensors. Experimental measurements of radiant flux of the prototype measured with a calibrated infrared radiometer and a wide spectrum radiometer are also presented. The prototype is easy to construct and the material required are available to most research centers, laboratories, industries, and universities. © 2010 American Institute of Physics.

A comparative study on the induced breeding and in vitro fertilization performance by various inducing agents in catfish, Heteropneustes fossilis (Bloch)

Brood catfish, Heteropneustes fossilis were collected from Tamirabarani river basin of Tamil Nadu, India and kept in cement tanks. Three inducing hormones viz, Ovaprim, Ovatide and WOVA-FH were injected at the rate of 0.5, 1.0, 1.5 and 2.0 ml/kg body weight in order to induce oocyte maturation and ovulation. After 10-13h of injection at a water temperature of 27±-0.5°C, stripping of eggs and in vitro fertilization was done. Ovaprim gave maximum (94.67%) hatching rate followed by Ovatide (90.33%) and WOVA-FH (77.33%).

Mass culture of marine diatom Skeletonema costatum (Greville) Cleve collected from the Bay of Bengal

The growth of Skeletonema costatum in two artificial nutrient media was studied using various culture vessels. Skeletonema costatum was collected from the Cox's Bazar coast around the Bay of Bengal. Different growths stages i.e. lag phase, exponential phase, prestationary phase, stationary and death phase were observed during the culture period. The number of cells increased during the active division period and decreased after the beginning of the prestationary phase. The average densities of S. costatum in primary and secondary cultures were 0.55 x 10 super(6) cells mlˉ¹ and 0.93x10 super(6) cells mlˉ¹, respectively. In mass culture of S. costatum two, types of media were used. Highest cells densities of S. costatum cement tank culture were recorded 1.23x10 super(6) cell mlˉ¹ and 0.78x10 super(6) cells mlˉ¹ in their respective f/4 medium and commercial fertilizer medium. In the cement tanks culture fertilizer medium was found to be the best medium for mass culture of S. costatum in respect of production efficiency and culture stability.

A study of the constraints affecting ornamental fish production in Sri Lanka

Although Sri Lanka is endowed with favourable climatic conditions and resources for breeding and rearing ornamental fish for export, a considerable number of ornamental fish producers as well as exporters have given up the industry within a relatively short period of time. This study was conducted to understand the present status of the industry and to identify the problems that have caused these failures. The study was conducted from March to December in the year 2007 and covered Colombo, Kaluthara, Polonnaruwa, Negombo, Wattala, Rathnapura, Avissawella, Kandy, Kegalle, Padukka, and Gampaha areas, where ornamental fish culture is known to be popular. The survey was carried out by interviewing ornamental fish farmers using a structured questionnaire survey that was designed to elicit the required information. Most (75%) of those surveyed were identified as small scale farmers. A majority (56%) of them used only cement tanks for their culture activities. Only 47% of farmers had proper technical knowledge or training on fish culture while 42% directly supplied their fish products to the expo1iers. The most important constraints identified by the study were as follows: (1) the sale price offish not changing in keeping with the increase in the material costs of production - Feed, cement, sand, transport and labour - in recent years. (2) Difficulty to find export markets for newcomers to enter the export market. (3) Lack of quality brooders and information on the most suitable fish varieties for the different climatic and water conditions in different areas in the country (3) Feed availability and cost. (4) Lack of adequate knowledge and technical support with regard to disease control and water quality management. (5) Difficulty to survive in the off season. (6) Difficulty in obtaining credit for expansion and the lack of sufficient involvement of responsible authorities in overcoming all these identified constraints.

The role of vibration and drainage in femoral impaction bone grafting.

Vibration is commonly used in civil engineering applications to efficiently compact aggregates. This study examined the effect of vibration and drainage on bone graft compaction and cement penetration in an in vitro femoral impaction bone grafting model with the use of 3-dimensional micro-computed tomographic imaging. Three regions were analyzed. In the middle and proximal femoral regions, there was a significant increase in the proportion of bone grafts with a reciprocal reduction in water and air in the vibration-assisted group (P < .01) as compared with the control group, suggesting tighter graft compaction. Cement volume was also significantly reduced in the middle region in the vibration-assisted group. No difference was observed in the distal region. This study demonstrates the value of vibration and drainage in bone graft compaction, with implications therein for clinical application and outcome.

Growth rates of Tilapia esculenta (Graham) and Tilapia zillii (Gervais) under cultivation in ponds at Nyegezi, Tanzania

Aquaculture in Tanzania is still on a subsistence level and most of the ponds are maintained as part time job. The ponds are too small, shallow and over crowded with stunted Tilapia spp. In the present paper the results of experiments conducted in ponds at Nyegezi with T. esculenta and T. zillii are presented. This was part of an overall project of developing techniques of fish cultures with Tilapia under the limited existing conditions at Nyegezi. In a mono - species culture experiement with Tilapia zillii in nine month's time an average size of 172.8 mm/115.0 g was attained. In another experiment with T. zillii and T. esculenta in thirteen month's time, T. zillii attained an average size of 180.2mm/106.6 g and T. esculenta 193.6 mm/118.8 g. In another experiment with intensive feeding schedule an average size of 179.3 mm/126.6 g was attained by T. zillii and 191.0 mm/125.0 g by T. esculenta in four month's time. A locally prepared supplimentary feed with local Brewery Waste and Fish Meal (10:1) was readily accepted by both species of Tilapia. T. zillii voraciously fed on Cabbage leaves, Cauliflower leaves, Chinese cabbage leaves, Cassava leaves and on the common weed Comalina sp. Though all the items mentioned above were readily accepted by T. zillii feeding with Comaltna sp. was the easiest and most convenient because of its availability. In an intensive feeding experiment with vegetable leaves/Comalina sp. and the locally prepared supplimentary feed the fishes attained table size in four months time. Cement cistens of 5 X 3 X 1½ m size could be conveniently used for breeding both species of Tilapia. T. zillii had semi adhesive eggs and they were deposited on the sides of the cement wall. The number of young ones in a brood ranged from 160 to 314 in T. esculenta and 687 to 4,356 in T. zillii.

Hybridization between Tilapia zillii (Gervais) and Tilapia andersonii (Casteinau) at the Freshwater Fisheries Institute, at Nyegezi, Tanzania

As a part of an overall project on fishculture development techniques in Tanzania, hybridization between Tilapia zillii and Tilapia andersonii was carried out at the Freshwater Fisheries Institute, Nyegezi, Tanzania. T. andersonii, a plankton feeder, is not indigenous to Tanzania but was introduced in 1968 from Zambia for certain specific purpose. T. zillii, a macrovegetation feeder, is present locally and is common. In the present studies T. zillii (245.0 mm/260.0 g) female was hybridized with T. andersonii (288.0 mm/350.0 g) male. Under cement cistern conditions it was only after about four months of acclimatization that hybridization between the two occurred. About 1,637 interspecific hybrid fry were produced in a single brood. Eggs were adhesive and parental care shown by the female, the male being driven away. Growth under cistern conditions was slow, attaining a size of 134.8 mm/44.3 g in 10 months. But this growth rate need not be taken as ideal. In body shape, colouration and other morphometric characters the hybrids had inherited from both parents. The number of gill rakers among the hybrids was eighteen which was intermediate between T. zillii (12) and T. andersonii (27). Among one hundred and seventy two specimens (106.0 mm - 168.0 mm) cut and examined the sex ration was hundred per cent males and all of them were between II and IV stages of maturity. This is the first report of fish hybridization from Tanzania and possibly the first report on hybridization between T. zillii and T. andersonii. The full significanoe of the findings and its role in African fishculture is discussed.

Accelerated ageing of a stabilised/solidified contaminated soil at elevated temperatures

Despite the widespread use of stabilisation/solidification (S/S) techniques, the validation and the availability of predictive modelling of the behaviour of stabilised/solidified soils in the longer-term is very limited. The authors were involved in the assessment of the behaviour of a contaminated site in the UK treated with cement-based in-situ S/S over the first five years after treatment. In parallel, two experimental methods, namely elevated temperatures and combined elevated temperatures and accelerated carbonation, were used in the laboratory to model accelerated ageing of the site soil. A graphical technique, based on the Arrhenius equation, was then used to model the laboratory observations and the in-situ five-year behaviour. The paper presents the details of the two experimental methods used for the accelerated ageing of stabilised/solidified model site soil, the numerical predictive model and a comparison between the results of the two experimental techniques and with the site results. © 2005 Taylor & Francis Group.

Part I: Binders & technologies - Basic principles

The first three reports in this series (Parts I, II and III) deals with binders and technologies used in stabilisation/ solidification (S/S) practice and research in the UK. This first part covers 'basic principles'while the second covers 'research' and the third 'applications'. The purpose of this work, which forms part of the Network STARNET on stabilisation/solidification treatment and remediation, is to identify the knowledge gaps and future research needs in this field. This paper describes the details and basic principles of available binders and technologies in the UK. The introduction in the report includes background on S/S, legislation aspects, overview of STARNET and its activities and details of commonly used binder selection criteria. The report is then divided into two main sections. The first covers binders and includes cement, blastfurnace slag, pulverised fuel ash, lime, natural and organophilic clays, bitumen, waste binders and concludes with proprietary binders. The second part details implementation processes for S/S treatment systems starting with ex-situ treatment systems, such as plant processing, direct mixing and in-drum processing and finishes with in-situ treatment processes, such as mechanical mixing and pressure mixing. © 2005 Taylor & Francis Group.