Estudio de la estructura de autofunciones de sistemas caóticos en una base de funciones de scar

El problema central que aborda esta tesis doctoral es el estudio de la correspondencia entre la mecanica clasica y la mecanica cuantica en sistemas hamiltonianos clasicamente caoticos, tema que se enmarca dentro del llamado caos cuantico. En concreto, en este trabajo proponemos un nuevo y efectivo metodo para calcular las autofunciones de sistemas caoticos usando una base de funciones de scar. Dichas funciones de scar juegan un papel fundamental en el estudio de las manifestaciones cuanticas del caos, ya que se trata de funciones de onda semiclasicas con una dispersion muy peque~na y localizadas a lo largo de las variedades invariantes de las orbitas periodicas inestables del sistema que conforman la estructura organizativa del caos clasico. El metodo de calculo desarrollado se ha denominado Metodo de Gram- Schmidt Selectivo (MGSS), dado que construye la base haciendo uso del metodo de Gram{Schmidt convencional pero teniendo en cuenta, ademas, la dispersi on de las funciones de scar y la longitud de la orbita periodica a lo largo de la cual se localizan. El MGSS nos ha permitido calcular con gran precision las 2400 autofunciones con menor energa de un oscilador cuartico altamente caotico con dos grados de libertad acoplados, as como autofunciones muy excitadas en una ventana de energa, utilizando en ambos casos una base mucho mas eciente que las descritas en la literatura. Ademas, hemos empleado el MGSS para calcular las autofunciones del sistema molecular LiNC/LiCN, que presenta un espacio de fases con zonas de regularidad y con regiones en las que el movimiento es altamente caotico; en este ultimo sistema, hemos calculado de forma muy eciente las autofunciones asociadas a las primeras 66 energas. Finalmente, hemos propuesto un metodo perturbativo para calcular velocidades de reaccion en sistemas abiertos descritos por potenciales anarmonicos. Con este metodo, hemos calculado la velocidad de reaccion de distintos potenciales de uno y dos grados de libertad, as como la velocidad de isomerizacion del sistema molecular LiNC/LiCN, tanto sometido a un ruido blanco (sin correlaciones) como en presencia de un ba~no de atomos de argon, lo que constituye un entorno con correlaciones. El metodo desarrollado es independiente de la supercie divisoria y nos ha permitido obtener correcciones analticas a la famosa formula de Kramers, lo que posibilita el calculo exacto de velocidades de reaccion en potenciales anarmonicos que interaccionan con el entorno.

Measured Stark widths of several spectral lines of Pb III

The Stark full widths at half of the maximal line intensity (FWHM, ω) have been measured for 25 spectrallines of PbIII (15 measured for the first time) arising from the 5d106s8s, 5d106s7p, 5d106s5f and 5d106s5g electronic configurations, in a lead plasma produced by ablation with a Nd:YAG laser. The optical emission spectroscopy from a laser-induced plasma generated by a 10 640 Å radiation, with an irradiance of 2 × 1010 W cm− 2 on a lead target (99.99% purity) in an atmosphere of argon was analysed in the wavelength interval between 2000 and 7000 Å. The broadening parameters were obtained with the target placed in argon atmosphere at 6 Torr and 400 ns after each laser light pulse, which provides appropriate measurement conditions. A Boltzmann plot was used to obtain the plasma temperature (21,400 K) and published values of the Starkwidths in Pb I, Pb II and PbIII to obtain the electron number density (7 × 1016 cm− 3); with these values, the plasma composition was determined by means of the Saha equation. Local Thermodynamic Equilibrium (LTE) conditions and plasma homogeneity has been checked. Special attention was dedicated to the possible self-absorption of the different transitions. Comparison of the new results with recent available data is also presented.

Characterization of Amorphous Tantalum Oxide for Insulating Acoustic Mirrors

This work describes the assessment of the acoustic properties of sputtered tantalum oxide films intended as high impedance films for the acoustic isolation of bulk acoustic wave devices operating in the GHz frequency range. The films are grown by sputtering a metallic tantalum target under different oxygen and argon gas mixtures, total pressures, pulsed DC powers and substrate bias. The structural properties of the films are assessed through infrared absorption spectroscopy and X-ray diffraction measurements. Their acoustic impedance is obtained after estimating the mass density by X-ray reflectometry measurements and the longitudinal acoustic velocity by analyzing the longitudinal λ/2 resonance induced in a tantalum oxide film inserted between an acoustic reflector and an AlN-based resonator. A second measurement of the sound velocity is achieved through picosecond acoustic spectroscopy.

Growth of AlN oriented films on insulating substrates.

This work describes the structural and piezoelectric assessment of aluminum nitride (AlN) thin films deposited by pulsed-DC reactive sputtering on insulating substrates. We investigate the effect of different insulating seed layers on AlN properties (crystallinity, residual stress and piezoelectric activity). The seed layers investigated, silicon nitride (Si3N4), silicon dioxide (SiO2), amorphous tantalum oxide (Ta2O5), and amorphous or nano-crystalline titanium oxide (TiO2) are deposited on glass plates to a thickness lower than 100 nm. Before AlN films deposition, their surface is pre-treated with a soft ionic cleaning, either with argon or nitrogen ions. Only AlN films grown of TiO2 seed layers exhibit a significant piezoelectric activity to be used in acoustic device applications. Pure c-axis oriented films, with FWHM of rocking curve of 6º, stress below 500 MPa, and electromechanical coupling factors measured in SAW devices of 1.25% are obtained. The best AlN films are achieved on amorphous TiO2 seed layers deposited at high target power and low sputtering pressure. On the other hand, AlN films deposited on Si3N4, SiO2 and TaOx exhibit a mixed orientation, high stress and very low piezoelectric activity, which invalidate their use in acoustic devices.

High-Acoustic-Impedance Tantalum Oxide Layers for Insulating Acoustic Reflectors

This work describes the assessment of the acoustic properties of sputtered tantalum oxide films intended for use as high-impedance films of acoustic reflectors for solidly mounted resonators operating in the gigahertz frequency range. The films are grown by sputtering a metallic tantalum target under different oxygen and argon gas mixtures, total pressures, pulsed dc powers, and substrate biases. The structural properties of the films are assessed through infrared absorption spectroscopy and X-ray diffraction measurements. Their acoustic impedance is assessed by deriving the mass density from X-ray reflectometry measurements and the acoustic velocity from picosecond acoustic spectroscopy and the analysis of the frequency response of the test resonators.

Application of laser-induced plasma spectroscopy to the measurement of transition probabilities of Ca I

We present improved experimental transition probabilities for the optical Ca I 4s4p-4s4d and 4s4p-4p2multiplets. The values were determined with an absolute uncertainty of 10%. Transition probabilities have been determined by the branching ratios from the measurement of relative line intensities emitted by laser-induced plasma (LIP). The line intensities were obtained with the target (leadcalcium) placed in argon atmosphere at 6 Torr, recorded at a 2.5 µs delay from the laser pulse, which provides appropriate measurement conditions, and analysed between 350.0 and 550.0 nm. They are measured when the plasma reaches local thermodynamic equilibrium (LTE). The plasma is characterized by electron temperature (T) of 11400 K and an electron number density (Ne) of 1.1 x 1016 cm-3. The influence self-absorption has been estimated for every line, and plasma homogeneity has been checked. The values obtained were compared with previous experimental values in the literature. The method for measurement of transition probabilities using laser-induced plasma as spectroscopic source has been checked.

Origin of the gases released from the Acqua Passante and Ermeta wells (Mt. Amiata, central Italy) and possible environmental implications for their closure

The Mt. Amiata volcano (Tuscany, central Italy) hosts the second largest geothermal field of Italy. Its SW and NE sectors are characterized by the presence of several CO2-rich (mayor que95% by vol.) gas discharges. An intense Hg mining activity had taken place from the 19th century up to the end of the ?70s, particularly close to Abbadia San Salvatore, during which two drillings (Acqua Passante and Ermeta) intercepted a CO2-rich gas fertile horizon. The related gases are emitted in the atmosphere since 1938 and 1959, respectively, causing severe concerns for the local air quality. In this work the results of a geochemical and isotopic survey carried out on these gas emissions from March 2009 to January 2014 are presented. CO2 fluxes from both the two wells and soil from an area of about 653,500 m2 located between them were measured. The two wells are emitting up to 15,000, 92 and 8 tons y-1 of CO2, CH4 and H2S, respectively, while the computed soil CO2 output was estimated at 4,311 ton y-1. The spatial distribution of the CO2 soil flux suggests the presence of preferential patterns, indicating sites of higher permeability. Since the local municipality is evaluating the possibility to plug the Ermeta vent, a temporarily closure should first be carried out to test the possible influence of this operation on the diffuse soil degassing of deep-originated CO2 in the surrounding area. This implies that diffuse soil gases should carefully be monitored before proceeding with its definitive closure.

El análogo natural de almacenamiento y escape de Co2 de la cuenca de Gañuelas-Mazarrón : implicaciones para el comportamiento y la seguridad de un almacenamiento de Co2 en estaso supercrítico

El aumento de la temperatura media de la Tierra durante el pasado siglo en casi 1 ºC; la subida del nivel medio del mar; la disminución del volumen de hielo y nieve terrestres; la fuerte variabilidad del clima y los episodios climáticos extremos que se vienen sucediendo durante las ultimas décadas; y el aumento de las epidemias y enfermedades infecciosas son solo algunas de las evidencias del cambio climático actual, causado, principalmente, por la acumulación de gases de efecto invernadero en la atmósfera por actividades antropogénicas. La problemática y preocupación creciente surgida a raíz de estos fenómenos, motivo que, en 1997, se adoptara el denominado “Protocolo de Kyoto” (Japón), por el que los países firmantes adoptaron diferentes medidas destinadas a controlar y reducir las emisiones de los citados gases. Entre estas medidas cabe destacar las tecnologías CAC, enfocadas a la captura, transporte y almacenamiento de CO2. En este contexto se aprobó, en octubre de 2008, el Proyecto Singular Estratégico “Tecnologías avanzadas de generación, captura y almacenamiento de CO2” (PSE-120000-2008-6), cofinanciado por el Ministerio de Ciencia e Innovación y el FEDER, el cual abordaba, en su Subproyecto “Almacenamiento Geológico de CO2” (PSS-120000-2008-31), el estudio detallado, entre otros, del Análogo Natural de Almacenamiento y Escape de CO2 de la cuenca de Ganuelas-Mazarrón (Murcia). Es precisamente en el marco de dicho Proyecto en el que se ha realizado este trabajo, cuyo objetivo final ha sido el de predecir el comportamiento y evaluar la seguridad, a corto, medio y largo plazo, de un Almacenamiento Geológico Profundo de CO2 (AGP-CO2), mediante el estudio integral del citado análogo natural. Este estudio ha comprendido: i) la contextualización geológica e hidrogeológica de la cuenca, así como la investigación geofísica de la misma; ii) la toma de muestras de aguas de algunos acuíferos seleccionados con el fin de realizar su estudio hidrogeoquímico e isotópico; iii) la caracterización mineralógica, petrográfica, geoquímica e isotópica de los travertinos precipitados a partir de las aguas de algunos de los sondeos de la cuenca; y iv) la medida y caracterización química e isotópica de los gases libres y disueltos detectados en la cuenca, con especial atención al CO2 y 222Rn. Esta información, desarrollada en capítulos independientes, ha permitido realizar un modelo conceptual de funcionamiento del sistema natural que constituye la cuenca de Ganuelas-Mazarrón, así como establecer las analogías entre este y un AGP-CO2, con posibles escapes naturales y/o antropogénicos. La aplicación de toda esta información ha servido, por un lado, para predecir el comportamiento y evaluar la seguridad, a corto, medio y largo plazo, de un AGP-CO2 y, por otro, proponer una metodología general aplicable al estudio de posibles emplazamientos de AGP-CO2 desde la perspectiva de los reservorios naturales de CO2. Los resultados más importantes indican que la cuenca de Ganuelas-Mazarrón se trata de una cubeta o fosa tectónica delimitada por fallas normales, con importantes saltos verticales, que hunden al substrato rocoso (Complejo Nevado-Filabride), y rellenas, generalmente, por materiales volcánicos-subvolcánicos ácidos. Además, esta cuenca se encuentra rellena por formaciones menos resistivas que son, de muro a techo, las margas miocenas, predominantes y casi exclusivas de la cuenca, y los conglomerados y gravas pliocuaternarias. El acuífero salino profundo y enriquecido en CO2, puesto de manifiesto por la xx exploración geotérmica realizada en dicha cuenca durante la década de los 80 y objeto principal de este estudio, se encuentra a techo de los materiales del Complejo Nevado-Filabride, a una profundidad que podría superar los 800 m, según los datos de la investigación mediante sondeos y geofísica. Por ello, no se descarta la posibilidad de que el CO2 se encuentre en estado supe critico, por lo que la citada cuenca reuniría las características principales de un almacenamiento geológico natural y profundo de CO2, o análogo natural de un AGP-CO2 en un acuífero salino profundo. La sobreexplotación de los acuíferos mas someros de la cuenca, con fines agrícolas, origino, por el descenso de sus niveles piezométricos y de la presión hidrostática, el ascenso de las aguas profundas, salinas y enriquecidas en CO2, las cuales son las responsables de la contaminación de dichos acuíferos. El estudio hidrogeoquímico de las aguas de los acuíferos investigados muestra una gran variedad de hidrofacies, incluso en aquellos de litología similar. La alta salinidad de estas aguas las hace inservibles tanto para el consumo humano como para fines agrícolas. Además, el carácter ligeramente ácido de la mayoría de estas aguas determina que tengan gran capacidad para disolver y transportar, hacia la superficie, elementos pesados y/o tóxicos, entre los que destaca el U, elemento abundante en las rocas volcánicas ácidas de la cuenca, con contenidos de hasta 14 ppm, y en forma de uraninita submicroscópica. El estudio isotópico ha permitido discernir el origen, entre otros, del C del DIC de las aguas (δ13C-DIC), explicándose como una mezcla de dos componentes principales: uno, procedente de la descomposición térmica de las calizas y mármoles del substrato y, otro, de origen edáfico, sin descartar una aportación menor de C de origen mantélico. El estudio de los travertinos que se están formando a la salida de las aguas de algunos sondeos, por la desgasificación rápida de CO2 y el consiguiente aumento de pH, ha permitido destacar este fenómeno, por analogía, como alerta de escapes de CO2 desde un AGP-CO2. El análisis de los gases disueltos y libres, con especial atención al CO2 y al 222Rn asociado, indican que el C del CO2, tanto disuelto como en fase libre, tiene un origen similar al del DIC, confirmándose la menor contribución de CO2 de origen mantélico, dada la relación R/Ra del He existente en estos gases. El 222Rn sería el generado por el decaimiento radiactivo del U, particularmente abundante en las rocas volcánicas de la cuenca, y/o por el 226Ra procedente del U o del existente en los yesos mesinienses de la cuenca. Además, el CO2 actúa como carrier del 222Rn, hecho evidenciado en las anomalías positivas de ambos gases a ~ 1 m de profundidad y relacionadas principalmente con perturbaciones naturales (fallas y contactos) y antropogénicas (sondeos). La signatura isotópica del C a partir del DIC, de los carbonatos (travertinos), y del CO2 disuelto y libre, sugiere que esta señal puede usarse como un excelente trazador de los escapes de CO2 desde un AGPCO2, en el cual se inyectara un CO2 procedente, generalmente, de la combustión de combustibles fósiles, con un δ13C(V-PDB) de ~ -30 ‰. Estos resultados han permitido construir un modelo conceptual de funcionamiento del sistema natural de la cuenca de Ganuelas-Mazarrón como análogo natural de un AGP-CO2, y establecer las relaciones entre ambos. Así, las analogías mas importantes, en cuanto a los elementos del sistema, serian la existencia de: i) un acuífero salino profundo enriquecido en CO2, que seria análoga a la formación almacén de un AGPxxi CO2; ii) una formación sedimentaria margosa que, con una potencia superior a 500 m, se correspondería con la formación sello de un AGP-CO2; y iii) acuíferos mas someros con aguas dulces y aptas para el consumo humano, rocas volcánicas ricas en U y fallas que se encuentran selladas por yesos y/o margas; elementos que también podrían concurrir en un emplazamiento de un AGP-CO2. Por otro lado, los procesos análogos mas importantes identificados serian: i) la inyección ascendente del CO2, que seria análoga a la inyección de CO2 de origen antropogénico, pero este con una signatura isotópica δ13C(V-PDB) de ~ -30 ‰; ii) la disolución de CO2 y 222Rn en las aguas del acuífero profundo, lo que seria análogo a la disolución de dichos gases en la formación almacén de un AGP-CO2; iii) la contaminación de los acuíferos mas someros por el ascenso de las aguas sobresaturadas en CO2, proceso que seria análogo a la contaminación que se produciría en los acuíferos existentes por encima de un AGP-CO2, siempre que este se perturbara natural (reactivación de fallas) o artificialmente (sondeos); iv) la desgasificación (CO2 y gases asociados, entre los que destaca el 222Rn) del acuífero salino profundo a través de sondeos, proceso análogo al que pudiera ocurrir en un AGP-CO2 perturbado; y v) la formación rápida de travertinos, proceso análogo indicativo de que el AGP-CO2 ha perdido su estanqueidad. La identificación de las analogías más importantes ha permitido, además, analizar y evaluar, de manera aproximada, el comportamiento y la seguridad, a corto, medio y largo plazo, de un AGP-CO2 emplazado en un contexto geológico similar al sistema natural estudiado. Para ello se ha seguido la metodología basada en el análisis e identificación de los FEPs (Features, Events and Processes), los cuales se han combinado entre sí para generar y analizar diferentes escenarios de evolución del sistema (scenario analysis). Estos escenarios de evolución identificados en el sistema natural perturbado, relacionados con la perforación de sondeos, sobreexplotación de acuíferos, precipitación rápida de travertinos, etc., serian análogos a los que podrían ocurrir en un AGP-CO2 que también fuera perturbado antropogénicamente, por lo que resulta totalmente necesario evitar la perturbación artificial de la formación sello del AGPCO2. Por último, con toda la información obtenida se ha propuesto una metodología de estudio que pueda aplicarse al estudio de posibles emplazamientos de un AGP-CO2 desde la perspectiva de los reservorios naturales de CO2, sean estancos o no. Esta metodología comprende varias fases de estudio, que comprendería la caracterización geológico-estructural del sitio y de sus componentes (agua, roca y gases), la identificación de las analogías entre un sistema natural de almacenamiento de CO2 y un modelo conceptual de un AGP-CO2, y el establecimiento de las implicaciones para el comportamiento y la seguridad de un AGP-CO2. ABSTRACT The accumulation of the anthropogenic greenhouse gases in the atmosphere is the main responsible for: i) the increase in the average temperature of the Earth over the past century by almost 1 °C; ii) the rise in the mean sea level; iii) the drop of the ice volume and terrestrial snow; iv) the strong climate variability and extreme weather events that have been happening over the last decades; and v) the spread of epidemics and infectious diseases. All of these events are just some of the evidence of current climate change. The problems and growing concern related to these phenomena, prompted the adoption of the so-called "Kyoto Protocol" (Japan) in 1997, in which the signatory countries established different measurements to control and reduce the emissions of the greenhouse gases. These measurements include the CCS technologies, focused on the capture, transport and storage of CO2. Within this context, it was approved, in October 2008, the Strategic Singular Project "Tecnologías avanzadas de generación, captura y almacenamiento de CO2" (PSE-120000-2008-6), supported by the Ministry of Science and Innovation and the FEDER funds. This Project, by means of the Subproject "Geological Storage of CO2" (PSS- 120000-2008-31), was focused on the detailed study of the Natural Analogue of CO2 Storage and Leakage located in the Ganuelas-Mazarron Tertiary basin (Murcia), among other Spanish Natural Analogues. This research work has been performed in the framework of this Subproject, being its final objective to predict the behaviour and evaluate the safety, at short, medium and long-term, of a CO2 Deep Geological Storage (CO2-DGS) by means of a comprehensive study of the abovementioned Natural Analogue. This study comprises: i) the geological and hydrogeological context of the basin and its geophysical research; ii) the water sampling of the selected aquifers to establish their hydrogeochemical and isotopic features; iii) the mineralogical, petrographic, geochemical and isotopic characterisation of the travertines formed from upwelling groundwater of several hydrogeological and geothermal wells; and iv) the measurement of the free and dissolved gases detected in the basin, as well as their chemical and isotopic characterisation, mainly regarding CO2 and 222Rn. This information, summarised in separate chapters in the text, has enabled to build a conceptual model of the studied natural system and to establish the analogies between both the studied natural system and a CO2-DGS, with possible natural and/or anthropogenic escapes. All this information has served, firstly, to predict the behaviour and to evaluate the safety, at short, medium and long-term, of a CO2-DGS and, secondly, to propose a general methodology to study suitable sites for a CO2-DGS, taking into account the lessons learned from this CO2 natural reservoir. The main results indicate that the Ganuelas-Mazarron basin is a graben bounded by normal faults with significant vertical movements, which move down the metamorphic substrate (Nevado-Filabride Complex), and filled with acid volcanic-subvolcanic rocks. Furthermore, this basin is filled with two sedimentary formations: i) the Miocene marls, which are predominant and almost exclusive in the basin; xxiv and ii) the Plio-Quaternary conglomerates and gravels. A deep saline CO2-rich aquifer was evidenced in this basin as a result of the geothermal exploration wells performed during the 80s, located just at the top of the Nevado-Filabride Complex and at a depth that could exceed 800 m, according to the geophysical exploration performed. This saline CO2-rich aquifer is precisely the main object of this study. Therefore, it is not discarded the possibility that the CO2 in this aquifer be in supercritical state. Consequently, the aforementioned basin gathers the main characteristics of a natural and deep CO2 geological storage, or natural analogue of a CO2-DGS in a deep saline aquifer. The overexploitation of the shallow aquifers in this basin for agriculture purposes caused the drop of the groundwater levels and hydrostatic pressures, and, as a result, the ascent of the deep saline and CO2-rich groundwater, which is the responsible for the contamination of the shallow and fresh aquifers. The hydrogeochemical features of groundwater from the investigated aquifers show the presence of very different hydrofacies, even in those with similar lithology. The high salinity of this groundwater prevents the human and agricultural uses. In addition, the slightly acidic character of most of these waters determines their capacity to dissolve and transport towards the surface heavy and/or toxic elements, among which U is highlighted. This element is abundant in the acidic volcanic rocks of the basin, with concentrations up to 14 ppm, mainly as sub-microscopic uraninite crystals. The isotopic study of this groundwater, particularly the isotopic signature of C from DIC (δ13C-DIC), suggests that dissolved C can be explained considering a mixture of C from two main different sources: i) from the thermal decomposition of limestones and marbles forming the substrate; and ii) from edaphic origin. However, a minor contribution of C from mantle degassing cannot be discarded. The study of travertines being formed from upwelling groundwater of several hydrogeological and geothermal wells, as a result of the fast CO2 degassing and the pH increase, has allowed highlighting this phenomenon, by analogy, as an alert for the CO2 leakages from a CO2-DGS. The analysis of the dissolved and free gases, with special attention to CO2 and 222Rn, indicates that the C from the dissolved and free CO2 has a similar origin to that of the DIC. The R/Ra ratio of He corroborates the minor contribution of CO2 from the mantle degassing. Furthermore, 222Rn is generated by the radioactive decay of U, particularly abundant in the volcanic rocks of the basin, and/or by 226Ra from the U or from the Messinian gypsum in the basin. Moreover, CO2 acts as a carrier of the 222Rn, a fact evidenced by the positive anomalies of both gases at ~ 1 m depth and mainly related to natural (faults and contacts) and anthropogenic (wells) perturbations. The isotopic signature of C from DIC, carbonates (travertines), and dissolved and free CO2, suggests that this parameter can be used as an excellent tracer of CO2 escapes from a CO2-DGS, in which CO2 usually from the combustion of fossil fuels, with δ13C(V-PDB) of ~ -30 ‰, will be injected. All of these results have allowed to build a conceptual model of the behaviour of the natural system studied as a natural analogue of a CO2-DGS, as well as to establish the relationships between both natural xxv and artificial systems. Thus, the most important analogies, regarding the elements of the system, would be the presence of: i) a deep saline CO2-rich aquifer, which would be analogous to the storage formation of a CO2-DGS; ii) a marly sedimentary formation with a thickness greater than 500 m, which would correspond to the sealing formation of a CO2-DGS; and iii) shallow aquifers with fresh waters suitable for human consumption, U-rich volcanic rocks, and faults that are sealed by gypsums and/or marls; geological elements that could also be present in a CO2-DGS. On the other hand, the most important analogous processes identified are: i) the upward injection of CO2, which would be analogous to the downward injection of the anthropogenic CO2, this last with a δ13C(V-PDB) of ~ -30 ‰; ii) the dissolution of CO2 and 222Rn in groundwater of the deep aquifer, which would be analogous to the dissolution of these gases in the storage formation of a CO2-DGS; iii) the contamination of the shallow aquifers by the uprising of CO2-oversaturated groundwater, an analogous process to the contamination that would occur in shallow aquifers located above a CO2-DGS, whenever it was naturally (reactivation of faults) or artificially (wells) perturbed; iv) the degassing (CO2 and associated gases, among which 222Rn is remarkable) of the deep saline aquifer through wells, process which could be similar in a perturbed CO2- DGS; v) the rapid formation of travertines, indicating that the CO2-DGS has lost its seal capacity. The identification of the most important analogies has also allowed analysing and evaluating, approximately, the behaviour and safety in the short, medium and long term, of a CO2-DGS hosted in a similar geological context of the natural system studied. For that, it has been followed the methodology based on the analysis and identification of FEPs (Features, Events and Processes) that have been combined together in order to generate and analyse different scenarios of the system evolution (scenario analysis). These identified scenarios in the perturbed natural system, related to boreholes, overexploitation of aquifers, rapid precipitation of travertines, etc., would be similar to those that might occur in a CO2-DGS anthropogenically perturbed, so that it is absolutely necessary to avoid the artificial perturbation of the seal formation of a CO2-DGS. Finally, a useful methodology for the study of possible sites for a CO2-DGS is suggested based on the information obtained from this investigation, taking into account the lessons learned from this CO2 natural reservoir. This methodology comprises several phases of study, including the geological and structural characterisation of the site and its components (water, rock and gases), the identification of the analogies between a CO2 storage natural system and a conceptual model of a CO2-DGS, and the implications regarding the behaviour and safety of a CO2-DGS.

Enhanced radon emission in natural CO2 flows in Campo de Calatrava region (central Spain)

Activity of radon gas in natural soils is commonly low (in the order of few thousands of Bq·m-3) due to the fast decay (half-life= 3.8 days in the case of 222Rn) that prevents accumulation in soil pores. Exceptionally, high Rn soil activity (up to 430 KBq·m-3) is found around point sources of deep CO2 fluxes. These fluxes allow the transport of trace gases (including Rn) to long distances in the geosphere leading to a potential hazard as Rn accumulation in buildings. CO2 degassing is common in active or ancient volcanic fields and occurs as free gas fluxes or dissolved in groundwater. In this work, the occurrence of Rnbearing, CO2 fluxes from the Campo de Calatrava region in Central Spain has been studied in order to determine their (1) magnitude, (2) migration paths and (3) potential impact on the environment, and (4) methodologies to best detection and measurement.

Aluminum-Resistant Arabidopsis Mutants That Exhibit Altered Patterns of Aluminum Accumulation and Organic Acid Release from Roots1

Al-resistant (alr) mutants of Arabidopsis thaliana were isolated and characterized to gain a better understanding of the genetic and physiological mechanisms of Al resistance. alr mutants were identified on the basis of enhanced root growth in the presence of levels of Al that strongly inhibited root growth in wild-type seedlings. Genetic analysis of the alr mutants showed that Al resistance was semidominant, and chromosome mapping of the mutants with microsatellite and random amplified polymorphic DNA markers indicated that the mutants mapped to two sites in the Arabidopsis genome: one locus on chromosome 1 (alr-108, alr-128, alr-131, and alr-139) and another on chromosome 4 (alr-104). Al accumulation in roots of mutant seedlings was studied by staining with the fluorescent Al-indicator dye morin and quantified via inductively coupled argon plasma mass spectrometry. It was found that the alr mutants accumulated lower levels of Al in the root tips compared with wild type. The possibility that the mutants released Al-chelating organic acids was examined. The mutants that mapped together on chromosome 1 released greater amounts of citrate or malate (as well as pyruvate) compared with wild type, suggesting that Al exclusion from roots of these alr mutants results from enhanced organic acid exudation. Roots of alr-104, on the other hand, did not exhibit increased release of malate or citrate, but did alkalinize the rhizosphere to a greater extent than wild-type roots. A detailed examination of Al resistance in this mutant is described in an accompanying paper (J. Degenhardt, P.B. Larsen, S.H. Howell, L.V. Kochian [1998] Plant Physiol 117: 19–27).

Inhibition of immunoglobulin folding and secretion by dominant negative BiP ATPase mutants.

A group of resident ER proteins have been identified that are proposed to function as molecular chaperones. The best characterized of these is BiP/GRP78, an hsp70 homologue that binds peptides containing hydrophobic residues in vitro and unfolded or unassembled proteins in vivo. However, evidence that mammalian BiP plays a direct role in protein folding remains circumstantial. In this study, we examine how BiP interacts with a particular substrate, immunoglobulin light chain (lambda LC), during its folding. Wild-type hamster BiP and several well-characterized BiP ATPase mutants were used in transient expression experiments. We demonstrate that wild-type lambda LCs showed prolonged association with mutant BiP which inhibited their secretion. Both wild-type and mutant BiP bound only to unfolded and partially folded LCs. The wild-type BiP was released from the incompletely folded LCs, allowing them to fold and be secreted, whereas the mutant BiP was not released. As a result, the LCs that were bound to BiP mutants were unable to undergo complete disulfide bond formation and were retained in the ER. Our experiments suggest that LCs undergo both BiP-dependent and BiP-independent folding steps, demonstrating that both ATP binding and hydrolysis activities of BiP are essential for the completion of LC folding in vivo and reveal that BiP must release before disulfide bond formation can occur in that domain.

Fluorescence energy transfer dye-labeled primers for DNA sequencing and analysis.

Fluorescent dye-labeled DNA primers have been developed that exploit fluorescence energy transfer (ET) to optimize the absorption and emission properties of the label. These primers carry a fluorescein derivative at the 5' end as a common donor and other fluorescein and rhodamine derivatives attached to a modified thymidine residue within the primer sequence as acceptors. Adjustment of the donor-acceptor spacing through the placement of the modified thymidine in the primer sequence allowed generation of four primers, all having strong absorption at a common excitation wavelength (488 nm) and fluorescence emission maxima of 525, 555, 580, and 605 nm. The ET efficiency of these primers ranges from 65% to 97%, and they exhibit similar electrophoretic mobilities by gel electrophoresis. With argon-ion laser excitation, the fluorescence of the ET primers and of the DNA sequencing fragments generated with ET primers is 2- to 6-fold greater than that of the corresponding primers or fragments labeled with single dyes. The higher fluorescence intensity of the ET primers allows DNA sequencing with one-fourth of the DNA template typically required when using T7 DNA polymerase. With single-stranded M13mp18 DNA as the template, a typical sequencing reaction with ET primers on a commercial sequencer provided DNA sequences with 99.8% accuracy in the first 500 bases. ET primers should be generally useful in the development of other multiplex DNA sequencing and analysis methods.

Supercondutividade em ligas de Ta1-xZrx

No presente estudo, amostras policristalinas ricas em Ta e com estequiometrias Ta1-xZrx; x < 0.15; foram preparadas através da mistura apropriada dos elementos metálicos, os quais foram fundidos em forno a arco elétrico sobre uma placa de cobre refrigerada a água e sob atmosfera de argônio de alta pureza. Os padrões de difração de raios-X das ligas, como fundidas (as cast) e tratadas termicamente a 850 °C por 24 h, revelaram a ocorrência de uma estrutura cristalina cúbica de corpo centrada bcc, tipo W, e parâmetros de rede que aumentam suavemente com o aumento do teor de Zr nas ligas. Medidas de susceptibilidade magnética dc, conduzidas nas condições de resfriamento da amostra em campo zero (ZFC) e do resfriamento com o campo magnético aplicado (FC), indicaram que supercondutividade volumétrica é observada abaixo de ~ 5.8, 6.9, 7.0 K em amostras com x = 0.05, 0.08, e 0.10, respectivamente. Essas temperaturas críticas supercondutoras são bastante superiores àquela observada no Ta elementar ~ 4.45 K. Medidas de resistividade elétrica na presença de campos magnéticos aplicados de até 9 T confirmaram a temperatura crítica supercondutora das amostras estudadas. O campo crítico superior Hc2 e o comprimento de coerência E foram estimados a partir dos dados de magnetorresistência. Os valores estimados de Hc2 foram de ~ 0.46, 1.78, 3.85 e 3.97 T, resultando em valores de E ~ 26.0, 13.6, 9.2 e 9.1 nm para as ligas as cast com x = 0.00, 0.05, 0.08 e 0.10, respectivamente. A partir dos dados experimentais do calor específico Cp das ligas, magnitudes estimadas do salto em Cp nas vizinhanças das transições supercondutoras indicaram valores maiores que o previsto pela teoria BCS. Utilizando as equações analíticas derivadas da teoria do acoplamento forte da supercondutividade foi então proposto que o aumento da temperatura de transição supercondutora nas ligas devido a substituição parcial do Ta por Zr está intimamente relacionado ao aumento do acoplamento elétron-fônon, visto que a densidade de estados eletrônicos no nível de Fermi foi estimada ser essencialmente constante através da série Ta1-xZrx com x < 0.10.

Evolução das doses no ambiente do Reator IEA-R1 e tendências com base nos resultados atuais

O Ipen/Cnen-SP possui um Reator de Pesquisa(IEA-R1) em operação desde 1957. Ele utiliza água leve como blindagem, moderador e como fluido refrigerante, o volume desta piscina é de 273m3. Até 1995 a operação do Reator era descontinua, ou seja, operava diariamente sendo desligado no final do dia, a uma potência de 2,0 MW. A partir daquele ano, após algumas modificações de segurança, o Reator passou a operar de forma continua, ou seja, de segunda-feira a quarta-feira sem ser desligado, totalizando 64 horas semanais. A potência também foi aumentando até 4,5 MW em 2012. Em virtude dessas alterações, a saber, operação contínua e do aumento da potência, as doses dos trabalhadores aumentaram e por isso foram realizados vários estudos para diminui-las. Estudos demonstraram que uma das principais limitações para operação de um reator em potência elevada, provém das radiações gama emitidas pelo sódio-24. Outros elementos como magnésio-27, Alumínio-28, Argônio-51, contribuem de forma considerável para a atividade da água da piscina. A introdução de uma camada de água quente em sua superfície, estável e isenta de elementos radioativos com 1,5m a 2m de espessura constituiria uma blindagem às radiações provenientes dos elementos radioativos dissolvidos na água. Estudos de otimização provaram que a instalação da camada quente não era necessária para o regime e potência atual de operação do Reator, pois outros procedimentos adotados eram mais eficazes. A partir desta decisão o serviço de Proteção Radiológica do Reator IEA-R1, montou um programa de avaliação das doses para certificar-se de que elas se mantinham em valores razoáveis baseados em princípios estabelecidos em normas nacionais e internacionais. O intuito deste trabalho é realizar uma análise das doses individuais dos IOE (Individuo Ocupacionalmente Expostos), considerando as mudanças no regime de operação do Reator e sugerir opções de proteção e segurança, viáveis em primeira instância, para reduzir as doses analisadas, visando se chegar aos níveis de referencia de 3 mSv/ano adotados pela instalação em apreço.

Utilização de resíduo de mármore e de óxido de boro em escórias sintéticas dessulfurantes para aços.

O mercado atual exige das indústrias siderúrgicas aços de melhor qualidade produzidos por meio de processos que causem menor impacto ao meio ambiente. Dessa forma, este trabalho teve como objetivo reciclar o resíduo de mármore gerado na indústria de rochas ornamentais, que possui em sua composição óxido de cálcio (CaO) e óxido de magnésio (MgO). O CaO é suficiente para substituir a cal nas escórias e o MgO contribui para a diminuição do desgaste dos refratários, através do emprego do resíduo no processo produtivo do aço. Além disso, foi realizada a substituição da fluorita por óxido de boro como fluxante na composição de misturas dessulfurantes. O resíduo de mármore foi caracterizado utilizando as seguintes técnicas: análise química via EDXFR, análise granulométrica via espalhamento de luz, área de superfície específica pelo método BET, difração de raios-X, microscopia eletrônica de varredura (MEV) e análise de micro-regiões por EDS. Visando verificar a eficiência na dessulfuração, foram formuladas misturas sintéticas utilizando a cal convencional ou resíduo de mármore, e a fluorita ou o óxido de boro. As misturas foram formuladas com o auxílio dos programas de termodinâmica computacional, Thermo-Calc e FactSage. Estas misturas foram adicionadas no aço fundido a temperatura de 1600°C sob atmosfera de argônio e agitadas por meio de um rotor de alumina. Amostras de metal foram retiradas para verificar a variação do teor de enxofre durante o experimento. O resíduo de mármore caracterizado, apresentou em sua composição 40% de CaO e 14% de MgO, na forma dos carbonatos CaCO3 e MgCO3. Obteve uma perda de massa de 42,1%, na forma de CO2 a temperatura de 780°C. Os experimentos mostraram que, as misturas testadas apresentaram, na maioria dos casos, eficiência de dessulfuração acima de 60%.