Considering the application of biophilic urbanism: A Sustainable Built Environment National Research Centre discussion paper

Biophilic urbanism, or urban design which refl ects human’s innate need for nature in and around and on top of our buildings, stands to make signifi cant contributions to a range of national, state and local government policies related to climate change mitigation and adaptation. Potential benefi ts include reducing the heat island effect, reducing energy consumption for thermal control, enhancing urban biodiversity, improving well being and productivity, improving water cycle management, and assisting in the response to growing needs for densifi cation and revitalisation of cities. This discussion paper will give an overview of the concept of biophilia and consider enablers and disablers to its application to urban planning and design. The paper will present findings from stakeholder engagement related to a consideration of the economics of the use of biophilic elements (direct and indirect). The paper outlines eight strategic areas being considered in the project, including how a ‘daily minimum dose’ of nature can be received through biophilic elements, and how planning and policy can underpin effective biophilic urbanism.

Energy productivity and decarbonization of the global economy: Factor five resource productivity

In the 21st Century much of the world will experience untold wealth and prosperity that could not even be conceived only some three centuries before. However as with most, if not all, of the human civilisations, increases in prosperity have accumulated significant environmental impacts that threaten to result in environmentally induced economic decline. A key part of the world’s response to this challenge is to rapidly decarbonise economies around the world, with options to achieve 60-80 per cent improvements (i.e. in the order of Factor 5) in energy and water productivity now available and proven in every sector. Drawing upon the 2009 publication “Factor 5”, in this paper we discuss how to realise such large-scale improvements, involving complexity beyond technical and process innovation. We begin by considering the concept of greenhouse gas stabilisation trajectories that include reducing current greenhouse gas emissions to achieve a ‘peaking’ of global emissions, and subsequent ‘tailing’ of emissions to the desired endpoint in ‘decarbonising’ the economy. Temporal priorities given to peaking and tailing have significant implications for the mix of decarbonising solutions and the need for government and market assistance in causing them to be implemented, requiring careful consideration upfront. Within this context we refer to a number of examples of Factor 5 style opportunities for energy productivity and decarbonisation, and then discuss the need for critical economic contributions to take such success from examples to central mechanisms in decarbonizing the global economy.

Effects of metal ion concentration on electrodeposited CuZnSn film and its application in kesterite Cu2ZnSnS4solar cells

In this study, effects of concentrations of Cu(II), Zn(II) and Sn(II) ions in the electrolytic bath solution on the properties of electrochemically deposited CuZnSn (CZT) films were investigated. Study of the composition of a CZT film has shown that the metallic content (relative atomic ratio) in the film increased linearly with increase in the metal ion concentration. It is the first time that the relationship of the compositions of the alloy phases in the co-electrodeposited CZT film with the concentration of metal ions has been revealed. The results have confirmed that the formation and content of Cu6Sn5 and Cu5Zn8 alloy phases in the film were directly controlled by the concentration of Cu(II). SEM measurements have shown that Sn(II) has significant impact on film morphology, which became more porous as a result of the larger nucleation size of tin. The changes in the surface properties of the films was also confirmed by chronoamperometry characteristic (i–t) deposition curves. By optimization of metal ion concentrations in the electrolyte solution, a copper-poor and zinc-rich kesterite Cu2ZnSnS4 (CZTS) film was synthesized by the sulfurization of the deposited CZT film. The solar cell with the CZTS film showed an energy conversion efficiency of 2.15% under the illumination intensity of 100 mW cm 2.

Moral rights and their application in Australia: a book review

In Moral Rights and Their Application in Australia, Maree Sainsbury offers a summary of the new moral rights regime established in Australia in 2000. It is a decent guide and handbook to moral rights for legal practitioners, the authors of copyright work, and the users of copyright material. As the author notes: "The Australian moral rights legislation impacts on the rights and obligations of many people in diverse circumstances, from the creator of a highly unique work of art to the designer of a web site incorporating factual information or graphics which someone else has created. Any person creating or dealing with copyright material should be aware of the moral rights implications. This book provides a detailed analysis of the moral rights legislation, while stressing the fundamental provisions. It also provides some useful practical guidance for those who are affected, both in general terms and with respect to the more specific situations outlined above." Maree Sainsbury provides an enjoyable account of the history and nature of moral rights. She charts the romantic, Continental origins of moral rights, and explains their translation to countries, such as Australia and the United States.

A dynamic navigation model for unmanned aircraft systems and an application to autonomous front-on environmental sensing and photography using low-cost sensor systems

This paper presents an unmanned aircraft system (UAS) that uses a probabilistic model for autonomous front-on environmental sensing or photography of a target. The system is based on low-cost and readily-available sensor systems in dynamic environments and with the general intent of improving the capabilities of dynamic waypoint-based navigation systems for a low-cost UAS. The behavioural dynamics of target movement for the design of a Kalman filter and Markov model-based prediction algorithm are included. Geometrical concepts and the Haversine formula are applied to the maximum likelihood case in order to make a prediction regarding a future state of a target, thus delivering a new waypoint for autonomous navigation. The results of the application to aerial filming with low-cost UAS are presented, achieving the desired goal of maintained front-on perspective without significant constraint to the route or pace of target movement.

R2P ten years after the World Summit: Explaining ongoing contestation over Pillar III

This article examines how and why contrasting interpretations of the international community’s role in preventing and responding to mass atrocity crimes continue to exist a decade after the Responsibility to Protect (R2P) was unanimously endorsed at the 2005 World Summit. Building on recent critical constructivist insights into the fluid, dynamic nature of norms, it advances two main arguments. The first is that continuing contestation over R2P’s third pillar is a product of a combination of internal and external sources of norm dynamism. R2P’s inherently complex normative structure, coupled with several external factors, including the broader normative environment, norm implementation experiences and a shift in global power towards the BRICS, have contributed to a period of renewed contestation and triggered attempts to re-formulate R2P thorough Brazil’s ‘Responsibility while Protecting’ (RwP) proposal and China’s semi-official ‘Responsible Protection’ concept. The second central argument is that such contestation is affecting R2P’s distinct normative prescriptions in different ways. While resistance to the implementation of coercive pillar III measures is currently impeding the normative progress of that component of the norm, this contestation has not prevented consensual pillar II assistance from becoming more deeply embedded in international practice and discourse.

Application of simulated annealing to data distribution for all-to-all comparison problems in homogeneous systems

Distributed systems are widely used for solving large-scale and data-intensive computing problems, including all-to-all comparison (ATAC) problems. However, when used for ATAC problems, existing computational frameworks such as Hadoop focus on load balancing for allocating comparison tasks, without careful consideration of data distribution and storage usage. While Hadoop-based solutions provide users with simplicity of implementation, their inherent MapReduce computing pattern does not match the ATAC pattern. This leads to load imbalances and poor data locality when Hadoop's data distribution strategy is used for ATAC problems. Here we present a data distribution strategy which considers data locality, load balancing and storage savings for ATAC computing problems in homogeneous distributed systems. A simulated annealing algorithm is developed for data distribution and task scheduling. Experimental results show a significant performance improvement for our approach over Hadoop-based solutions.

The application of building information modeling to enhance organisational learning

The construction industry is a knowledge-based industry where various actors with diverse expertise create unique information within different phases of a project. The industry has been criticized by researchers and practitioners as being unable to apply newly created knowledge effectively to innovate. The fragmented nature of the construction industry reduces the opportunity of project participants to learn from each other and absorb knowledge. Building Information Modelling (BIM), referring to digital representations of constructed facilities, is a promising technological advance that has been proposed to assist in the sharing of knowledge and creation of linkages between firms. Previous studies have mainly focused on the technical attributes of BIM and there is little evidence on its capability to enhance learning in construction firms. This conceptual paper identifies six ‘functional attributes’ of BIM that act as triggers to stimulate learning: (1) comprehensibility; (2) predictability; (3) accuracy; (4) transparency; (5) mutual understanding and; (6) integration.

Cost-effectiveness of bone-anchored prosthesis: the Queensland experience

Individuals with limb amputation fitted with conventional socket-suspended prostheses often experience socket-related discomfort leading to a significant decrease in quality of life. Bone-anchored prostheses are increasingly acknowledged as viable alternative method of attachment of artificial limb. In this case, the prosthesis is attached directly to the residual skeleton through a percutaneous fixation. To date, a few osseointegration fixations are commercially available. Several devices are at different stages of development particularly in Europe and the US. [1-15] Clearly, surgical procedures are currently blooming worldwide. Indeed, Australia and Queensland, in particular, have one of the fastest growing populations. Previous studies involving either screw-type implants or press-fit fixations for bone-anchorage have focused on biomechanics aspects as well as the clinical benefits and safety of the procedure. In principle, bone-anchored prostheses should eliminate lifetime expenses associated with sockets and, consequently, potentially alleviate the financial burden of amputation for governmental organizations. Unfortunately, publications focusing on cost-effectiveness are sparse. In fact, only one study published by Haggstrom et al (2012), reported that “despite significantly fewer visits for prosthetic service the annual mean costs for osseointegrated prostheses were comparable with socket-suspended prostheses”. Consequently, governmental organizations such as Queensland Artificial Limb Services (QALS) are facing a number of challenges while adjusting financial assistance schemes that should be fair and equitable to their clients fitted with bone-anchored prostheses. Clearly, more scientific evidence extracted from governmental databases is needed to further consolidate the analyses of financial burden associated with both methods of attachment (i.e., conventional sockets prostheses, bone-anchored prostheses). The purpose of the presentation will be to share the current outcomes of a cost-analysis study lead by QALS. The specific objectives will be: • To outline methodological avenues to assess the cost-effectiveness of bone-anchored prostheses compared to conventional sockets prostheses, • To highlight the potential obstacles and limitations in cost-effectiveness analyses of bone-anchored prostheses, • To present cohort results of a cost-effectiveness (QALY vs cost) including the determination of fair Incremental cost-effectiveness Ratios (ICER) as well as cost-benefit analysis focusing on the comparing costs and key outcome indicators (e.g., QTFA, TUG, 6MWT, activities of daily living) over QALS funding cycles for both methods of attachment.

Comparative studies of how living circumstances influence medication adherence in ≥ 65 year olds

Background Resources to help the older aged (≥65 year olds) manage their medicines should probably target those in greatest need. The older-aged have many different types of living circumstances. There are different locations (urban, rural), different types of housing (in the community or in retirement villages), different living arrangements (living alone or with others), and different socioeconomic status (SES) circumstances. However, there has been limited attention to whether these living circumstances affect adherence to medicines in the ≥65 year olds. Aim of the review The aim was to determine whether comparative studies, including logistic regression studies, show that living circumstances affect adherence to medicines by the ≥65 year olds. Methods A literature search of Medline, CINAHL and the Internet (Google) was undertaken. Results Four comparative studies have not shown differences in adherence to medicines between the ≥65 year olds living in rural and urban locations, but one study shows lower adherence to medicines for osteoporosis in rural areas compared to metropolitan, and another study shows greater adherence to antihypertensive medicines in rural than urban areas. There are no comparative studies of adherence to medicines in the older-aged living in indigenous communities compared to other communities. There is conflicting evidence as to whether living alone, being unmarried, or having a low income/worth is associated with nonadherence. Preliminary studies have suggested that the older-aged living in rental, low SES retirement villages or leasehold, middle SES retirement villages have a lower adherence to medicines than those living in freehold, high SES retirement villages. Conclusions The ≥65 year olds living in rural communities may need extra help with adherence to medicines for osteoporosis. The ≥65 year olds living in rental or leasehold retirement villages may require extra assistance/resources to adhere to their medicines. Further research is needed to clarify whether living under certain living circumstances (e.g. living alone, being unmarried, low income) has an effect on adherence, and to determine whether the ≥65 year olds living in indigenous communities need assistance to be adherent to prescribed medicines.