Modelagem e otimização por metodologia de superfícies de resposta: um estudo em arames de aço SAE 9254 para molas automobilísticas

Pós-graduação em Engenharia Mecânica - FEG

Análise da distribuição de força plantar e postura em diferentes alturas de salto alto por meio de uma plataforma de força simuladora de salto alto

Pós-graduação em Engenharia Mecânica - FEG

Características morfogenéticas, perdas de nitrogênio por volatilização, reservas orgânicas e sistema radicular do capim-Tanzânia fertilizado com doses de nitrogênio

O objetivo do trabalho foi estudar as características morfogenéticas e estruturais do capim-Tanzânia, a produção de forragem, as perdas de nitrogênio (N) por volatilização, reservas orgânicas e a avaliação do sistema radicular sob doses de nitrogênio sob pastejo. O experimento foi instalado na área Fazenda Experimental de Iguatemi da Universidade Estadual de Maringá, no período de março de 2007 a março de 2008. O delineamento experimental utilizado foi de blocos completos ao acaso, com parcelas subdivididas com quatro repetições. Nas parcelas, encontravam-se as doses de N (0, 150, 300 e 450 kg ha-1 de N) e, nas sub-parcelas, as estações do ano. As perdas de N por volatilização foram quantificadas depois da adubação N (1, 2, 3, 6, 9, 12 e 15 dias). As amostragens das raízes foram realizadas nas profundidades de 0-10, 10-20 e 20-40 cm. A aplicação do fertilizante N na pastagem foi parcelada em três aplicações. A produção de massa seca total e de lâmina foliar de forragem respondeu linearmente até 282 kg ha-1 de N na estação do verão. A adubação nitrogenada exerce efeito positivo nas taxas de alongamento e aparecimento foliar, e no número de folhas vivas em plantas de capim-Tanzânia nas estações da primavera e verão. Elevadas adubações nitrogenadas associada a intervalos menores de pastejo promovem uma maior porcentagem de lâmina foliar; no manejo de pastos de capim-Tanzânia sob lotação rotacionada com altura de 70 cm na entrada dos animais para o pastejo e saída com 30 cm de altura do resíduo. A interação entre o nível de adubação e o período depois da aplicação de uréia foi significativa para a variável volatilização acumulada de N-NH3. A aplicação da uréia acarreta perdas percentuais mais elevadas de N nos três primeiros dias após a aplicação. A perda média acumulada de N-NH3 no período para as três estações do ano... (Resumo completo, clicar acesso eletrônico abaixo)

Multi-vortex State Induced by Proximity Effects in a Small Superconducting Square

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Do Thyroid Ultrasonographic Features Change According to Age in Euthyroid Dogs?

The thyroid gland was assessed by ultrasound in healthy euthyroid mixed-breed medium size dogs in different age groups. The objective was to verify ultrasonographic imaging patterns in these groups, as well as to identify possible changes in imaging features resulting from ageing. Thirty dogs - 10 young (<1 year), 10 adult and 10 elderly - without clinical signs or history of thyroid gland disease with complete blood count and thyroid function tests within the reference values were evaluated. Each thyroid lobe was examined by ultrasound for shape, size, echogenicity and echotexture. The analysis of echogenicity and echotexture was made by histogram. Thyroid volume was estimated by the equation for ellipsoid (length x width x height) pi/6. The thyroid volume of the young dogs in this study had a tendency to be higher than in adult dogs (P = 0.068) and older dogs (P = 0.120). The height of the thyroid lobe in the longitudinal plane was significantly higher (P = 0.026) in young dogs compared with the other dogs. The echotexture and echogenicity had no significant differences between groups, but the echogenicity was greater in older dogs. The results point out that ultrasound imaging of the thyroid volume is influenced by age in euthyroid dogs.

Comportamento ingestivo de bovinos mantidos em pastos de Brachiaria brizantha cv. Xaraés manejado em diferentes alturas de pastejo

This experiment was conducted to evaluate the effect of grazing heights on daytime behavioral activities of Nellore beef cattle in the rainy season. The experimental area was 12 hectares divided into paddocks of one hectare each. The treatments consisted of four defoliation heights (15, 30, 45 and 60 cm) in pastures of Brachiaria brizantha cv. Xaraes with three replicates each. It was used the continuos grazing method, with variable stocking rate. Forage samples collected on the plots were sent to the laboratory for separation of the botanical components, weighing and determination of dry matter, with the material collected by simulated grazing. The variables: grazing time, idle time and ruminating time were evaluated for 12 consecutive hours on days 15 and 16 February 2011, considering the morning and afternoon periods. It was used a completely randomized design. The height of the canopy significantly influenced the daily grazing time and ruminating time, with a quadratic response as a function of time of defoliation. The bite rate decreased as a function of heights studied. However the chemical composition of the material collected by simulated grazing did not differ between treatments. Xaraes grass swards grazed at around 45 cm height provide greater ease of apprehension by grazing cattle.

Desempenho de bovinos de corte em pastos de Brachiaria brizantha cv. Xaraés manejados em diferentes alturas de pastejo

The production of grazing cattle has been very interesting, due to the low cost to produce fodder, compared to other sources of forage used to feed these animals, but the adequate management pasture has high influence on the success and profitability of cattle production systems. Thus, the objective of this study was to determine the optimum grazing height of Brachiaria brizantha cv. Xaraes, which provides the highest individual weight gain and gain per area. The stocking rate was continuous, with variable stocking rate. The experimental period was from January to December 2010. Three Nellore males were used in each experimental plot, and, when needed, additional animals were used for adjusting the desired heights. Monthly sampling was obtained to estimate forage mass (kg.ha(-1) of DM) and the structural characteristics of the pastures, such as, leaf: stem ratio. The animals were weighed at the beginning of the experiment and every 28 days, after 12 hours of fasting, to measure the average daily gain (ADG) After weighings were performed adjustments stocking rate to desired heights. Throughout the experimental period the animals received mineral supplementation. The desired sward heights were 15, 30, 45 and 60 cm, with three replicates each. The experimental design was completely randomized with four treatments and three replications. To body weight gain (BWG) and average daily gain (ADG), each animal was considered an experimental unit. To gain per area and stocking rate, the paddock was considered the experimental unit. The leaf: stem ratio showed a linear increasing behavior in the spring and summer seasons. The smaller grazing heights provided higher gain per unit area (812.15 kg ha(-1)), while the highest grazing heights promoted high individual weight gain (0.790 kg.dia(-1)). The results suggest that Xaraes grass pastures should be grazed between 30 and 45 cm to allow reasonable performances by area and individual performances.

Características produtivas e morfológicas do capim Tanzânia em diferentes intensidades de pastejo

The objective of this study was to determine the best height of the Tanzania grass under grazing, assessing morphological and productive characteristics of the sward. This experiment was conducted in Cidade Gaucha, Parana, where he was rated the accumulation rate and morphological characteristics of Tanzania grass pastures grazed at 20, 40, 60 and 80 cm grazing under continuous stocking with variable stocking rate for beef cattle. The experimental area was 12 hectare divided in paddocks of one hectare each. For each paddock were allocated two grazing exclusion cage for estimating herbage accumulation, and eight samples were taken every 28 days throughout the year 2010. The completely randomized design. The herbage mass of the morphological structures showed a linear positive function of sward heights. The height of defoliation did not influence the rate of herbage accumulation for any of the morphological structures: green leaf, stem + sheaths and senescent material. There were also no differences in leaf: stem ratio. All heights within the range studied provided adequate number of green leaves per tiller. Tanzania grass pastures grazed under continuous stocking between 40 and 60 cm, for providing a good association between accumulation and mass of green leaf blades, and acceptable values of the mass of stem + sheaths and senescent material. Pasture of Tanzania grass under 60 and 80 cm allow of leaves satisfactory accumulation in the autumn.

Obtenção de constantes elásticas da madeira de duas espécies de Pinus sp

There are many studies about longitudinal modulus of elasticity of wood, but you can´t say the same of transverse modulus, especially for conifers. The study aimed to characterize and compare the species Pinus elliottii var. elliottii and Pinus elliottii var. elliottii x Pinus cariabeae hondurensis (hybrid), and the longitudinal modulus of elasticity (E) and lateral (G) in bending, to analyze the modulus of elasticity in different spaces and to verify the species studied the ideal range is equal to 21 times the height of the specimen, as prescribed in the normative document NBR 7190/1997, as well as analyzing the relationship G = E/20 defined in the normative document NBR 7190/1997. The wood came from the farm located in Paranapanema, split at the mill São José and the rest of the work was conducted at the Experimental Itapeva Campus - UNESP. Were removed fourteen specimens of each species. The average values of the modulus of elasticity and cross were, respectively, 5828 MPa and 452 MPa for Pinus elliottii var. elliottii and 6407 MPa and 320 MPa for the species of Pinus elliottii var. elliottii x Pinus cariabeae hondurensis (hybrid). The trend lines for the plotted graphs showed an exponential behavior to near linear 21he will equal the constant after this value. We have found the relationship G = E/13, for Pinus elliottii var. elliottii and G = E/20 for hybrid. The results of the modulus and strength for Pinus elliottii var. elliottii and the hybrid were lower than those reported in the literature, showing that this batch inferior quality to apply to structures

Abordagem multivariada na análise de diversidade genética em cruzamentos para alto teor de óleo em soja

The soybean crop is considered a high expression around the world. In plant breeding programs, knowledge of genetic diversity is extremely important and in this context, are frequently used multivariate analyzes. Thus, the aim of the present study was to evaluate the genetic divergence between soybean crosses through multivariate techniques. In total, 16 crosses were evaluated, which were in the F2 generation of inbreeding. The evaluated characteristics were plant height at maturity, height of the first pod, number of branches per plant, number of pods per plant, number of nodes per plant, hundred seed weight, grain yield and oil content. For the analyzes was used Euclidean distance, methods of hierarchical clustering UPGMA and Ward and principal component analysis. Genetic distances estimated using Euclidean distance ranged from 1.24 to 8.13, with the smallest distance observed between crosses C1 and C4, and the greatest distance between the C2 crosses and C6. The methods UPGMA clustering and Ward met crossings in five different groups. The principal component analysis explained 86.2% of the variance contained in the original eight variables with three main components. The APM characters, NV, NR, NN, PG% and oil were the main contributors to genetic divergence among traits. Multivariate techniques were crucial to the analysis of genetic diversity, and the methods of Ward and UPGMA clustering and principal components have consistent results in this way, the simultaneous use of these tools in genetic analysis of crosses is indicated