Myoepithelial molecular markers in human breast carcinoma PMC42-LA cells are induced by extracellular matrix and stromal cells

The microenvironment plays a key role in the cellular differentiation of the two main cell lineages of the human breast, luminal epithelial, and myoepithelial. It is not clear, however, how the components of the microenvironment control the development of these cell lineages. To investigate how lineage development is regulated by 3-D culture and microenvironment components, we used the PMC42-LA human breast carcinoma cell line, which possesses stem cell characteristics. When cultured on a two-dimensional glass substrate, PMC42-LA cells formed a monolayer and expressed predominantly luminal epithelial markers, including cytokeratins 8, 18, and 19; E-cadherin; and sialomucin. The key myoepithelial-specific proteins alpha-smooth muscle actin and cytokeratin 14 were not expressed. When cultured within Engelbreth-Holm- Swarm sarcoma-derived basement membrane matrix (EHS matrix), PMC42-LA cells formed organoids in which the expression of luminal markers was reduced and the expression of other myoepithelial-specific markers (cytokeratin 17 and P-cadherin) was promoted. The presence of primary human mammary gland fibroblasts within the EHS matrix induced expression of the key myoepithelial-specific markers, alpha-smooth muscle actin and cytokeratin 14. Immortalized human skin fibroblasts were less effective in inducing expression of these key myoepithelial-specific markers. Confocal dual-labeling showed that individual cells expressed luminal or myoepithelial proteins, but not both. Conditioned medium from the mammary fibroblasts was equally effective in inducing myoepithelial marker expression. The results indicate that the myoepithelial lineage is promoted by the extracellular matrix, in conjunction with products secreted by breast-specific fibroblasts. Our results demonstrate a key role for the breast microenvironment in the regulation of breast lineage development.

Some aspects of numerical simulation for lamb wave propogation in composite laminates

Some aspects of numerical simulation of Lamb wave propagation in composite laminates using the finite element models with explicit dynamic analysis are addressed in this study. To correctly and efficiently describe the guided-wave excited/received by piezoelectric actuators/sensors, effective models of surface-bounded flat PZT disks based on effective force, moment and displacement are developed. Different finite element models for Lamb wave excitation, collection and propagation in isotropic plate and quasi-isotropic laminated composite are evaluated using continuum elements (3-D solid element) and structural elements (3-D shell element), to elaborate the validity and versatility of the proposed actuator/sensor models.

Finite element simulation of deformation processes of micro-components

The aim of this paper is to improve the understanding of deformation of micro medical needle and thread during assembly and then to develop an economical and flexible deformation method. Therefore, the swaging process is computationally simulated with the finite element method in this paper. A commercially available explicit nonlinear finite element analysis code, LS-Dyna, is used to model the 3-D deformation and contact problem. As the firmness of the assembly on the needle depends on the contact force and friction, the contact and the slide between the needle and thread are taken into account in the simulation. The general surface-to-surface contact algorithm (STS) is used to simulate the contact. The paper provides an insight into the deformation of the micro products.

Three-dimensional Finite Element modelling of laser shock peening process

Laser shock peening (LSP) is an innovative surface treatment technique for metal alloys, with the great improvement of their fatigue, corrosion and wear resistance performance. Finite element method has been widely applied to simulate the LSP to provide the theoretically predictive assessment and optimally parametric design. In the current work, 3-D numerical modelling approaches, combining the explicit dynamic analysis, static equilibrium analysis algorithms and different plasticity models for the high strain rate exceeding 106s-1, are further developed. To verify the proposed methods, 3-D static and dynamic FEA of AA7075-T7351 rods subject to two-sided laser shock peening are performed using the FEA package–ABAQUS. The dynamic and residual stress fields, shock wave propagation and surface deformation of the treated metal from different material modelling approaches have a good agreement.

A virtual salesperson

This chapter describes the use of a graphical humane interface - a Virtual Salesperson. The face of the Virtual Salesperson is a generic Facial Animation Engine developed at the University of Genova in Italy and uses a 3-D computer graphics model based on the MPEG-4 standard supplemented by Cyberware scans for facial detail. The appearance of the head may be modified by Facial Definition Parameters to more accurately model the required visage allowing one model to represent many different Talking Heads. The “brain” of the Virtual Salesperson, developed at Curtin University, integrates natural language parsing, text to speech synthesis, and artificial intelligence systems to produce a “bot” capable of helping a user through a question/answer sales enquiry. The Virtual Salesperson is a specific example of a generic Human Computer Interface - a Talking Head.

Geometrical effects on residual stresses in 7050-T7451 aluminum alloy rods subject to laser shock peening

Laser shock peening (LSP) is an emerging surface treatment technology for metallic materials, which appears to produce more significant compressive residual stresses than those from the conventional shot peening (SP) for fatigue, corrosion and wear resistance, etc. The finite element method has been applied to simulate the laser shock peening treatment to provide the overall numerical assessment of the characteristic physical processes and transformations. However, the previous researchers mostly focused on metallic specimens with simple geometry, e.g. flat surface. The current work investigates geometrical effects of metallic specimens with curved surface on the residual stress fields produced by LSP process using three-dimensional finite element (3-D FEM) analysis and aluminium alloy rods with a middle scalloped section subject to two-sided laser shock peening. Specimens were numerically studied to determine dynamic and residual stress fields with varying laser parameters and geometrical parameters, e.g. laser power intensity and radius of the middle scalloped section. The results showed that the geometrical effects of the curved target surface greatly influenced residual stress fields.

Geometrical effects on residual stresses in 7050-T7451 aluminum alloy rods subject to laser shock peening

Laser shock peening (LSP) is an emerging surface treatment technology for metallic materials, which appears to produce more significant compressive residual stresses than those from the conventional shot peening (SP) for fatigue, corrosion and wear resistance, etc. The finite element method has been applied to simulate the laser shock peening treatment to provide the overall numerical assessment of the characteristic physical processes and transformations. However, the previous researchers mostly focused on metallic specimens with simple geometry, e.g. flat surface. The current work investigates geometrical effects of metallic specimens with curved surface on the residual stress fields produced by LSP process using three-dimensional finite element (3-D FEM) analysis and aluminium alloy rods with a middle scalloped section subject to two-sided laser shock peening. Specimens were numerically studied to determine dynamic and residual stress fields with varying laser parameters and geometrical parameters, e.g. laser power intensity and radius of the middle scalloped section. The results showed that the geometrical effects of the curved target surface greatly influenced residual stress fields.

The effect of acute fenitrotion exposure on a variety of physiological indices, including avian aerobic metabolism during exercise and cold exposure

The effect of fenitrothion exposure on birds was examined by measuring aerobic metabolism, blood hemoglobin content, plasma cholinesterases, and body weight for up to 21 d postdose. Peak metabolic rate was measured in a flight chamber in three-dose groups of house sparrows (Passer domesticus; 100 mg/kg = high, 60 mg/kg = medium, 30 mg/kg = low) and one-dose groups of zebra finches (Taeniopygia guttata; 3 mg/kg) and king quails (Coturnix chinensis; 26 mg/kg). Aerobic metabolism was measured during 1 h of exposure to subfreezing thermal conditions in low-dose house sparrows and king quails (26 mg/kg). Fenitrothion had no effect on metabolic rate during cold exposure or on blood hemoglobin at any time. By contrast, aerobic performance during exercise in sparrows was reduced by 58% (high), 18% (medium), and 20% (low), respectively, 2 d postdose. House sparrows (high) had the longest recovery period for peak metabolic rate (21 d) and plasma cholinesterase activity (14 d). House sparrows (high) and treated king quails had significantly lower myoglobin at 48 h postdose, whereas myoglobin was invariant in zebra finches and house sparrows (medium and low). Cholinesterase was maximally inhibited at 6 h postdose, and had recovered within 24 h, in house sparrows (low), king quails, and zebra finches. Exercise peak metabolic rate in zebra finches and king quails was reduced by 23% at 2 d and 3 d, respectively, despite these birds being asymptomatic in both behavior and plasma cholinesterase activities.

Synthetic studies towards anthraquinones

The oxidation of substituted phenols with phenyliodonium diacetate in methanol was found to afford 2,4-cyclohexadienones, 2,5-cyclohexadienones or mixtures of isomers depending on the substrate being oxidized. A reaction mechanism was proposed for this oxidation which involved an intermediate aryloxenium ion. A strong correlation was observed between the experimentally determined product ratios and the results predicted by calculation of the LUMO coefficients of the proposed intermediates, Annulation of these cyclohexadienones with the anion derived from cyanophthalide afforded substituted anthraquinones in high yields. The chemistry relating to the annulation of Michael acceptors with phthalide anions was comprehensively reviewed. A mild selective method for the oxidation of hydroquinones to quinones using dibenzoyl peroxide and base is presented. A general synthetic approach to C-glycosylanthraquinones was presented, based on the annulation of a C-glycosylcyclohexadienone with the anion derived from cyanophthalide, A suitable precursor to a C-glycosylcyclohexadienone, 2-(2’,3’,4’,6’-tetra-0-acetyl-|3-D-glucopyranosyl)benzyloxybenzene, was prepared via the reaction of benzoylbromoglucose with 2-benzyloxyphenylmagnesium bromide, A group of molecules were prepared by a Marschalk reaction between /ewcoquinizarin and aldehydo-sugsrs. These compounds are potential bioreductive alkylating agents in which molecular simplicity can be achieved without overly sacrificing DNA binding ability.

Spatial and temporal disparities in aurally aided visual search

Research over the last decade has shown that auditorily cuing the location of visual targets reduces the time taken to locate and identify targets for both free-field and virtually presented sounds. The first study conducted for this thesis confirmed these findings over an extensive region of free-field space. However, the number of sound locations that are measured and stored in the data library of most 3-D audio spatial systems is limited, so that there is often a discrepancy in position between the cued and physical location of the target. Sampling limitations in the systems also produce temporal delays in which the stored data can be conveyed to operators. To investigate the effects of spatial and temporal disparities in audio cuing of visual search, and to provide evidence to alleviate concerns that psychological research lags behind the capabilities to design and implement synthetic interfaces, experiments were conducted to examine (a) the magnitude of spatial separation, and (b) the duration of temporal delay that intervened between auditory spatial cues and visual targets to alter response times to locate targets and discriminate their shape, relative to when the stimuli were spatially aligned, and temporally synchronised, respectively. Participants listened to free-field sound localisation cues that were presented with a single, highly visible target that could appear anywhere across 360° of azimuthal space on the vertical mid-line (spatial separation), or extended to 45° above and below the vertical mid-line (temporal delay). A vertical or horizontal spatial separation of 40° between the stimuli significantly increased response times, while separations of 30° or less did not reach significance. Response times were slowed at most target locations when auditory cues occurred 770 msecs prior to the appearance of targets, but not with similar durations of temporal delay (i.e., 440 msecs or less). When sounds followed the appearance of targets, the stimulus onset asynchrony that affected response times was dependent on target location, and ranged from 440 msecs at higher elevations and rearward of participants, to 1,100 msecs on the vertical mid-line. If targets appeared in the frontal field of view, no delay of acoustical stimulation affected performance. Finally, when conditions of spatial separation and temporal delay were combined, visual search times were degraded with a shorter stimulus onset asynchrony than when only the temporal relationship between the stimuli was varied, but responses to spatial separation were unaffected. The implications of the results for the development of synthetic audio spatial systems to aid visual search tasks was discussed.

Painting that moves : digital realism and the single moving image

Explores space and object relations in a digital 3-D animation production, "Moving-Image". The exegesis examines these relations through an analysis of pictorial realism in painting. The illusion of three dimensional forms in the space of the computer screen is contextualised by investigation of the work's underlying digital conditions.

Ingrowth of human mesenchymal stem cells into porous silk particle reinforced silk composite scaffolds : an in vitro study

Silk fibroin protein is biodegradable and biocompatible, exhibiting excellent mechanical properties for various biomedical applications. However, porous three-dimensional (3-D) silk fibroin scaffolds, or silk sponges, usually fall short in matching the initial mechanical requirements for bone tissue engineering. In the present study, silk sponge matrices were reinforced with silk microparticles to generate protein-protein composite scaffolds with desirable mechanical properties for in vitro osteogenic tissue formation. It was found that increasing the silk microparticle loading led to a substantial increase in the scaffold compressive modulus from 0.3 MPa (non-reinforced) to 1.9 MPa for 1:2 (matrix:particle) reinforcement loading by dry mass. Biochemical, gene expression, and histological assays were employed to study the possible effects of increasing composite scaffold stiffness, due to microparticle reinforcement, on in vitro osteogenic differentiation of human mesenchymal stem cells (hMSCs). Increasing silk microparticle loading increased the osteogenic capability of hMSCs in the presence of bone morphogenic protein-2 (BMP-2) and other osteogenic factors in static culture for up to 6 weeks. The calcium adsorption increased dramatically with increasing loading, as observed from biochemical assays, histological staining, and microcomputer tomography (μCT) analysis. Specifically, calcium content in the scaffolds increased by 0.57, 0.71, and 1.27 mg (per μg of DNA) from 3 to 6 weeks for matrix to particle dry mass loading ratios of 1:0, 1:1, and 1:2, respectively. In addition, μCT imaging revealed that at 6 weeks, bone volume fraction increased from 0.78% for non-reinforced to 7.1% and 6.7% for 1:1 and 1:2 loading, respectively. Our results support the hypothesis that scaffold stiffness may strongly influence the 3-D in vitro differentiation capabilities of hMSCs, providing a means to improve osteogenic outcomes.

Rendering optimisations for stylised sketching

We present work that specifically pertains to the rendering stage of stylised, non-photorealistic sketching. While a substantial body of work has been published on geometric optimisations, surface topologies, space-algorithms and natural media simulation, rendering-specific issues are rarely discussed in-depth even though they are often acknowledged. We investigate the most common stylised sketching approaches and identify possible rendering optimisations. In particular, we define uncertainty-functions, which are used to describe a human-error component, discuss how these pertain to geometric perturbation and textured silhouette sketching and explain how they can be cached to improve performance. Temporal coherence, which poses a problem for textured silhouette sketching, is addressed by means of an easily computed visibility-function. Lastly, we produce an effective yet surprisingly simple solution to seamless hatching, which commonly presents a large computational overhead, by using 3-D textures in a novel fashion. All our optimisations are cost-effective, easy to implement and work in conjunction with most existing algorithms.

Laguerre Runge-Kutta-Fehlberg method for simulating laser pulse propagation in biological tissue

An efficient algorithm for solving the transient radiative transfer equation for laser pulse propagation in biological tissue is presented. A Laguerre expansion is used to represent the time dependency of the incident short pulse. The Runge–Kutta– Fehlberg method is used to solve the intensity. The discrete ordinates method is used to discretize with respect to azimuthal and zenith angles. This method offers the advantages of representing the intensity with a high accuracy using only a few Laguerre polynomials, and straightforward extension to inhomogeneous media. Also, this formulation can be easily extended for solving the 2-D and 3-D transient radiative transfer equations.

Biological treatment of oily wastewater from gas stations by membrane bioreactor

In many Asian countries, rapid industrialization and urbanization has led to an increased number of cars, making wastewater from gas stations an important issue of concern in urban environment. This wastewater is characterized by high concentration of oil-water emulsion, which cannot be effectively removed by a conventional gravity separator. An experimental investigation on the treatability of oily wastewater from gas stations using a membrane bioreactor (MBR) system revealed that MBR system could achieve good removal efficiency with stability against shock loading. Optimum operating conditions were found to be at a hydraulic retention time of 4 h and an oil-loading rate of 1.8 kg oil m^sup -3^.d^sup -1^. It was anticipated that adding powdered activated carbon (PAC) in the MBR could help to adsorb the oils. However, operating the MBR with only microbial flocs has an advantage over adding PAC particles into the MBR, since the former condition could provide a prolonged cycle of filtration with a relatively lesser increase in transmembrane pressure.