Evaluation of a model for induction of periodontal disease in dogs

There are several methods for inducing periodontal disease in animal models, being the bone defect one of the most reported. This study aimed to evaluate this model, through clinical, radiographic, tomographic and histological analyzes, thus providing standardized data for future regenerative works. Twelve dogs were subjected to the induction protocol. In a first surgical procedure, a mucoperiosteal flap was made on the buccal aspect of the right third and fourth premolars and a defect was produced exposing the furcation and mesial and distal roots, with dimensions: 5mm coronoapical, 5mm mesiodistal, and 3mm buccolingual. Periodontal ligament and cementum were curetted and the defect was filled with molding polyester, which was removed after 21 days on new surgical procedure. Clinical and radiographic examinations were performed after the two surgeries and before the collection of parts for dental tomography and histological analysis. All animals showed grade II furcation exposure in both teeth. Clinical attachment level increased after induction. Defect size did not change for coronoapical and buccolingual measurements, while mesiodistal size was significantly higher than at the time of defect production. Radiographic analysis showed decreased radiopacity and discontinuity of lamina dura in every tooth in the furcation area. The horizontal progression of the disease was evident in micro-computed tomography and defect content in the histological analysis. Therefore, it is concluded that this method promotes the induction of periodontal disease in dogs in a standardized way, thus being a good model for future work.

Influence of Cutting Conditions on Tool Life, Tool Wear and Surface Finish in the Face Milling Process

The main goal of this work is to study the influence of cutting conditions - cutting speed, feed velocity and feed per tooth - on tool life and surface finish of the workpiece in the face milling of flat surfaces. Aiming to achieve this goal, several milling experiments were carried out with different cutting speeds, feed velocities and feeds per tooth. In the first phase of the experiments, cutting speed was varied without varying feed velocity, which caused a variation in feed per tooth. In the second phase of the experiments, cutting speed and feed velocity were varied in such a way that feed per tooth was kept constant. Tool flank wear and surface roughness of the workpiece were measured as cutting time elapsed. The main conclusions of this work are that a) cutting speed has a strong influence on tool life, regardless of whether feed velocity or feed per tooth varies and b) an increase in surface roughness of the workpiece is not closely related to an increase in wear of the primary cutting edge.

Wind Turbine Direct-Drive Permanent-Magnet Generator with Direct Liquid Cooling for Mass Reduction

Today’s electrical machine technology allows increasing the wind turbine output power by an order of magnitude from the technology that existed only ten years ago. However, it is sometimes argued that high-power direct-drive wind turbine generators will prove to be of limited practical importance because of their relatively large size and weight. The limited space for the generator in a wind turbine application together with the growing use of wind energy pose a challenge for the design engineers who are trying to increase torque without making the generator larger. When it comes to high torque density, the limiting factor in every electrical machine is heat, and if the electrical machine parts exceed their maximum allowable continuous operating temperature, even for a short time, they can suffer permanent damage. Therefore, highly efficient thermal design or cooling methods is needed. One of the promising solutions to enhance heat transfer performances of high-power, low-speed electrical machines is the direct cooling of the windings. This doctoral dissertation proposes a rotor-surface-magnet synchronous generator with a fractional slot nonoverlapping stator winding made of hollow conductors, through which liquid coolant can be passed directly during the application of current in order to increase the convective heat transfer capabilities and reduce the generator mass. This doctoral dissertation focuses on the electromagnetic design of a liquid-cooled direct-drive permanent-magnet synchronous generator (LC DD-PMSG) for a directdrive wind turbine application. The analytical calculation of the magnetic field distribution is carried out with the ambition of fast and accurate predicting of the main dimensions of the machine and especially the thickness of the permanent magnets; the generator electromagnetic parameters as well as the design optimization. The focus is on the generator design with a fractional slot non-overlapping winding placed into open stator slots. This is an a priori selection to guarantee easy manufacturing of the LC winding. A thermal analysis of the LC DD-PMSG based on a lumped parameter thermal model takes place with the ambition of evaluating the generator thermal performance. The thermal model was adapted to take into account the uneven copper loss distribution resulting from the skin effect as well as the effect of temperature on the copper winding resistance and the thermophysical properties of the coolant. The developed lumpedparameter thermal model and the analytical calculation of the magnetic field distribution can both be integrated with the presented algorithm to optimize an LC DD-PMSG design. Based on an instrumented small prototype with liquid-cooled tooth-coils, the following targets have been achieved: experimental determination of the performance of the direct liquid cooling of the stator winding and validating the temperatures predicted by an analytical thermal model; proving the feasibility of manufacturing the liquid-cooled tooth-coil winding; moreover, demonstration of the objectives of the project to potential customers.

Florística e fitossociologia de remanescentes de floresta estacional decidual em Piracicaba, São Paulo, Brasil

O estudo foi realizado em dois remanescentes de floresta estacional decidual de 4 e 10 ha, em Piracicaba, São Paulo, Brasil. Esta floresta tem características abióticas próprias, como solo litólico, estresse hídrico no período seco e excesso de água no período úmido, definindo uma flora particular e fisionomia semelhante a de florestas secas. O levantamento florístico foi realizado nos dois remanescentes e o fitossociológico naquele de 10 ha, onde foram amostrados os indivíduos com perímetro à altura do peito (PAP) > ou = 15 cm existentes em 43 parcelas de 10 x 10 m. Foram registradas 110 espécies, 86 gêneros e 42 famílias. Do total de espécies, 20,7% continham espinhos, 31,0% dos 894 indivíduos amostrados apresentaram-se perfilhados e, no estrato dominante, ocorreram espécies com perda de turgescência foliar (24,7% dos indivíduos), decíduas (59,4%), áfilas (13,3%) perenes (1,6%) e semidecíduas (1,0%). As famílias de maior riqueza na fitossociologia foram Leguminosae, Myrtaceae e Rutaceae. As espécies de maior valor de importância foram Cereus hildmanianus, Eugenia florida, Eugenia uniflora, Pseudobombax grandiflorum e Sebastiania serrata. O índice de diversidade de Shannon (H’) foi de 3,0 nats/indivíduos e a equabilidade (J) de 0,7 nats/indivíduos.

Mudanças na florística e estrutura de uma floresta decídua durante um período de quatro anos (1994-1998), na região do Triângulo Mineiro, MG

As alterações na estrutura e na composição florística de um fragmento de floresta decídua foram descritas para um período de quatro anos (1994-1998), na região do Triângulo Mineiro, MG. Este fragmento, denominado Mata da Zilda, foi bastante perturbado por atividades humanas até 1993, sendo protegido a partir de 1994. Logo após a sua proteção, realizou-se um inventário das plantas lenhosas (CAP > ou = 10 cm) em 26 transectos de 50 x 6 m (0,78 ha). Quatro anos depois (1998), todos os transectos foram reavaliados e medidos os novos ingressos. Em 1994, foram identificadas 114 espécies, representando 46 famílias. A riqueza de espécies foi idêntica em 1998. Também, os valores do índice de Shannon (3,72) e a equabilidade (0,79) não diferiram significativamente durante os quatro anos (teste t, p > 0,1). A riqueza de espécies na Mata da Zilda foi superior à observada nas florestas secas Neotropicais, devido provavelmente à fase de sucessão em que se encontra. Embora a densidade tenha diminuído cerca de 10,2%, durante os quatro anos, a área basal total mudou pouco, aumentando apenas 1,5%. Essas alterações refletiram-se na distribuição em classes de tamanho, que apresentou diferenças significativas entre os dois períodos avaliados (teste Qui-quadrado, p < 0,01). O declínio das espécies pioneiras (teste Qui-quadrado, p < 0,001) e o crescimento em área basal das árvores do dossel foram essenciais para as alterações estruturais observadas durante os quatro anos. A preservação do fragmento estudado está sendo fundamental para a sua recuperação nos últimos anos.

Frugivory on Margaritaria nobilis L.f. (Euphorbiaceae): poor investment and mimetism

Dehiscent fruits of Euphorbiaceae usually have two stages of seed dispersal, autochory followed by myrmecochory. Two stages of Margaritaria nobilis seed dispersal were described, the first stage autochoric followed by ornithocoric. Their dehiscent fruits are green and after they detached from the tree crown and fall on the ground, they open and expose blue metallic cocas. We studied the seed dispersal system of Margaritaria nobilis in a semi-deciduous forest in Brazil. In 80 h of focal observations, we recorded only 12 visits of frugivores, however the thrush Turdus leucomelas was the only frugivore that swallowed the fruits on the tree crown. Pitylus fuliginosus (Fringilidae) and Pionus maximiliani (Psittacidae) were mainly pulp eaters, dropping the seeds below the tree. On the forest floor, after fruits dehiscence, jays (Cyanocorax chrysops), guans (Penelope superciliaris), doves (Geotrygon montana) and collared-peccaries (Pecari tajacu) were observed eating the blue diaspores of M. nobilis. Experiments in captivity showed that scaly-headed parrots (Pionus maximiliani), toco toucans (Ramphastos toco), jays (Cyanochorax chrysops), and guans (Penelope superciliaris) consumed the fruits and did not prey on the seeds before consumption. The seeds collected from the feces did not germinate in spite of the high viability. The two stages of seed dispersal in M. nobilis resembles the dispersal strategies of some mimetic species. However M. nobilis seeds are associated with an endocarp, it showed low investment in nutrients, and consistent with this hypothesis, M. nobilis shared important characteristics with mimetic fruits, such as bright color display, long seed dormancy and protection by secondary compounds.

Patterns of litter production in a secondary alluvial Atlantic Rain Forest in southern Brazil

Above-ground litter production is one of the most accessible ways to estimate ecosystem productivity, nutrient fluxes and carbon transfers. Phenological patterns and climatic conditions are still not fully explained well for tropical and subtropical forests under less pronounced dry season and non-seasonal climates, as well as the interaction of these patterns with successional dynamics. Monthly litterfall was estimated for two years in a 9 to 10 year old secondary alluvial Atlantic Rain forest. Total litterfall was higher in the site with more developed vegetation (6.4 ± 1.2 ton ha-1 year-1; 95% confidence interval) as compared to the site with less developed vegetation (3.0 ± 1.0 ton ha-1 year-1). The monthly production of 11 litter fractions (eight fractions comprising the leaf litter of the seven main species of the community and other species; reproductive parts, twigs £ 2 cm diameter, and miscellaneous material) were correlated with meteorological variables making possible to identify three patterns of deposition. The main pattern, dominated by leaf-exchanging species, consisted of a cycle with the highest litterfall at the beginning of the rainy season, preceding by basically three months the peaks of the annual cycles of rainfall and temperatures. Other two patterns, dominated by brevi-deciduous species, peaked at the end of the rainy season and at the end of the non-rainy season. Tropical and subtropical dry forests that present the highest leaf fall gradually earlier than rain forests (as the studied sites) are possibly related to the start of senescence process. It seems that such process is triggered earlier by a more severe hydric stress, besides other factors linked to a minor physiological activity of plants that result in abscission.

The position of the hyaline papilla and the genus concept of Cheilolejeunea (Spruce) Schiffn. (Lejeuneaceae)

In this paper, the genus concept of Cheilolejeunea is discussed and revalued based upon the concept of the real position of the hyaline papilla, as well as upon the definition of apical tooth of the lobule in the genus.

An overview of invasive plants in Brazil

Alien plants are known to occur in Brazil since the 18th century when African grasses started to be recorded in pastures near Rio de Janeiro. In the beginning of the 19th century two royal decrees (July, 1809 and July, 1810) offered grants and tax exemption to everyone who would introduce plants of economic value. Nowadays, there are 117 plant species recognized as invasive or established and with invasive potential in Brazil and an unknown number of introduced plant species. Some of the most pervasive invasive species are Artocarpus heterophyllus Lam. and Hedychium coronarium König in tropical ombrophilous forest, Hovenia dulcis Thunb. in subtropical ombrophilous forest and subtropical semi-deciduous forest, Pinus taeda L. and Pinus elliottii Engelm. in subtropical ombrophilous forest and steppe, Prosopis juliflora (Sw.) DC. in stepic-savanna, Tecoma stans (L.) Juss. ex Kunth in tropical and subtropical semi-deciduous forest, Melinis minutiflora P. Beauv. in the Brazilian savannas, and Eragrostis plana Nees in the steppe. The purpose of this article is to fill a knowledge gap on alien species that are invasive in Brazil and where they are invading by summarizing data obtained by joint efforts of the Hórus Institute for Environmental Conservation and Development, The Nature Conservancy (TNC), the Inter-American Biodiversity Information Network (IABIN) invasive species thematic network (I3N), and the Brazilian Ministry of Environment (MMA) in the last six years.

Relationships between crown architecture and available irradiance in two cerrado species with different leaf phenologies

Structural differences between cerrado species with different leaf phenologies are linked to crown architecture, leaf production, and biomass allocation to shoots and leaves. The present study characterized crown structures and the patterns of biomass allocation to leaves and shoots in two woody cerrado species with contrasting leaf phenologies and quantified the irradiance reaching their leaves to determine the best period during the day for photosynthetic activity. The shoots and leaves of five individuals of both Annona coriacea (deciduous) and Hymenaea stigonocarpa (evergreen) were collected along a 50 m transect in a cerrado fragment within the urban perimeter of Catalão - GO, to determine their patterns of biomass allocation in their crowns. The evergreen H. stigonocarpa had significantly higher mean values of shoot inclination (SI), petiole length (PL), leaf area (LA), leaf display index (LDI), and individual leaf area per shoot (ILA), while the deciduous species A. coriacea had significantly higher leaf numbers (LN). The more complex crown of H. stigonocarpa had shoots in more erect positions (orthotropic), with intense self-shading within shoots; A. coriacea, on the other hand, had slanting (plagiotropic) shoots in the crown, allowing similar irradiance levels to all leaf surfaces. The production of plagiotropic shoots by the deciduous species (A. coriacea) is a strategy that enables its use of incident sunlight early in the morning and preventing excessive water loss or excessive irradiance. Hymenaea stigonocarpa (an evergreen), by contrast, had orthotropic shoots and uses intense self-shading as a strategy to avoid excessive irradiance, especially at midday. Differences in crown architectures between evergreen and deciduous species of cerrado sensu stricto can therefore be viewed as adaptations to the environmental light regime.

Odonto-ungueal dysplasia: an apparently new autosomal dominant ectodermal dysplasia

We describe 27 subjects (11 women) from five generations of a family with an apparently hitherto undescribed ectodermal dysplasia. All of them presented dental and/or nail alterations only. A genetic analysis of the family suggests an autosomal dominant gene. Differential diagnosis considered eight conditions belonging to the same odonto-onychic (2-3) subgroup, as well as Fried's tooth and nail syndrome and hypodontia and nail dysgenesis (both in 1-2-3 subgroup).

Liquid cooling solutions for rotating permanent magnet synchronous machines

In the design of electrical machines, efficiency improvements have become very important. However, there are at least two significant cases in which the compactness of electrical machines is critical and the tolerance of extremely high losses is valued: vehicle traction, where very high torque density is desired at least temporarily; and direct-drive wind turbine generators, whose mass should be acceptably low. As ever higher torque density and ever more compact electrical machines are developed for these purposes, thermal issues, i.e. avoidance of over-temperatures and damage in conditions of high heat losses, are becoming of utmost importance. The excessive temperatures of critical machine components, such as insulation and permanent magnets, easily cause failures of the whole electrical equipment. In electrical machines with excitation systems based on permanent magnets, special attention must be paid to the rotor temperature because of the temperature-sensitive properties of permanent magnets. The allowable temperature of NdFeB magnets is usually significantly less than 150 ˚C. The practical problem is that the part of the machine where the permanent magnets are located should stay cooler than the copper windings, which can easily tolerate temperatures of 155 ˚C or 180 ˚C. Therefore, new cooling solutions should be developed in order to cool permanent magnet electrical machines with high torque density and because of it with high concentrated losses in stators. In this doctoral dissertation, direct and indirect liquid cooling techniques for permanent magnet synchronous electrical machines (PMSM) with high torque density are presented and discussed. The aim of this research is to analyse thermal behaviours of the machines using the most applicable and accurate thermal analysis methods and to propose new, practical machine designs based on these analyses. The Computational Fluid Dynamics (CFD) thermal simulations of the heat transfer inside the machines and lumped parameter thermal network (LPTN) simulations both presented herein are used for the analyses. Detailed descriptions of the simulated thermal models are also presented. Most of the theoretical considerations and simulations have been verified via experimental measurements on a copper tooth-coil (motorette) and on various prototypes of electrical machines. The indirect liquid cooling systems of a 100 kW axial flux (AF) PMSM and a 110 kW radial flux (RF) PMSM are analysed here by means of simplified 3D CFD conjugate thermal models of the parts of both machines. In terms of results, a significant temperature drop of 40 ̊C in the stator winding and 28 ̊C in the rotor of the AF PMSM was achieved with the addition of highly thermally conductive materials into the machine: copper bars inserted in the teeth, and potting material around the end windings. In the RF PMSM, the potting material resulted in a temperature decrease of 6 ̊C in the stator winding, and in a decrease of 10 ̊C in the rotor embedded-permanentmagnets. Two types of unique direct liquid cooling systems for low power machines are analysed herein to demonstrate the effectiveness of the cooling systems in conditions of highly concentrated heat losses. LPTN analysis and CFD thermal analysis (the latter being particularly useful for unique design) were applied to simulate the temperature distribution within the machine models. Oil-immersion cooling provided good cooling capability for a 26.6 kW PMSM of a hybrid vehicle. A direct liquid cooling system for the copper winding with inner stainless steel tubes was designed for an 8 MW directdrive PM synchronous generator. The design principles of this cooling solution are described in detail in this thesis. The thermal analyses demonstrate that the stator winding and the rotor magnet temperatures are kept significantly below their critical temperatures with demineralized water flow. A comparison study of the coolant agents indicates that propylene glycol is more effective than ethylene glycol in arctic conditions.

Effect of Sapindus trifoliatus on hyperalgesic in vivo migraine models

Phytotherapies have offered alternative sources of therapy for migraine and gained much importance in prophylactic treatment. Sapindus trifoliatus is a medium-sized deciduous tree growing wild in south India that belongs to the family Sapindaceae. The pericarp is reported for various medicinal properties. A thick aqueous solution of the pericarp is used for the treatment of hemicrania, hysteria or epilepsy in folklore medicine. We have investigated the antihyperalgesic effects of the lyophilized aqueous extract of S. trifoliatus in animal models predictive of experimental migraine models using morphine withdrawal-induced hyperalgesia on the hot-plate test and on 0.3% acetic acid-induced abdominal constrictions in adult male Swiss albino mice. The extract significantly (N = 10, P < 0.05) increased the licking latency in the hot-plate test when administered ip at 10 mg/kg (6.70 ± 0.39 s in saline control vs 18.76 ± 0.96 s in S. trifoliatus-treated animals) and significantly (N = 10, P < 0.001) reduced the abdominal constrictions when administered ip at 2 and 10 mg/kg (40.20 ± 1.36 in saline control vs 30.20 ± 1.33 and 23.00 ± 0.98 for 2 and 10 mg/kg, ip, respectively, in S. trifoliatus-treated animals). Furthermore, when administered ip at 20 and 100 mg/kg, the extract significantly (N = 10, P < 0.05) inhibited the apomorphine-induced climbing behavior in mice (climbing duration 15.75 ± 5.0 min for saline control vs 11.4 ± 1.28 and 3.9 ± 1.71 min for 20 and 100 mg/kg, respectively, in S. trifoliatus-treated animals). In receptor radioligand-binding studies, the extract exhibited affinity towards D2 receptors. The findings suggest that dopamine D2 antagonism could be the mechanism involved in the antihyperalgesic activity of the aqueous extract of S. trifoliatus.

Unequal Teeth Widths for Torque Ripple Reduction in Permanent Magnet Synchronous Machines With Fractional-Slot Non-Overlapping Windings

Permanent magnet synchronous machines with fractional-slot non-overlapping windings (FSPMSM), also known as tooth-coil winding permanent magnet synchronous machines (TCW PMSM), have been under intensive research during the latest decade. There are many optimization routines explained and implemented in the literature in order to improve the characteristics of this machine type. This paper introduces a new technique for torque ripple minimization in TCW PMSM. The source of torque harmonics is also described. The low order torque harmonics can be harmful for a variety of applications, such as direct drive wind generators, direct drive light vehicle electrical motors, and for some high precision servo applications. The reduction of the torque ripple harmonics with the lowest orders (6th and 12th) is realized by machine geometry optimization technique using finite element analysis (FEA). The presented optimization technique includes the stator geometry adjustment in TCW PMSMs with rotor surface permanent magnets and with rotor embedded permanent magnets. Influence of the permanent magnet skewing on the torque ripple reduction and cogging torque elimination was also investigated. It was implemented separately and together with the stator optimization technique. As a result, the reduction of some torque ripple harmonics was attained.

Efficacy and safety of combined piroxicam, dexamethasone, orphenadrine, and cyanocobalamin treatment in mandibular molar surgery

Third molar extraction is a common procedure frequently accompanied by moderate or severe pain, and involves sufficient numbers of patients to make studies relatively easy to perform. The aim of the present study was to determine the efficacy and safety of the therapeutic combination of 10 mg piroxicam, 1 mg dexamethasone, 35 mg orphenadrine citrate, and 2.5 mg cyanocobalamin (Rheumazin®) when compared with 20 mg piroxicam alone (Feldene®) in mandibular third molar surgery. Eighty patients scheduled for removal of the third molar were included in this randomized and double-blind study. They received (vo) Rheumazin or Feldene 30 min after tooth extraction and once daily for 4 consecutive days. Pain was determined by a visual analogue scale and by the need for escape analgesia (paracetamol). Facial swelling was evaluated with a measuring tape and adverse effects and patient satisfaction were recorded. There was no statistically significant difference in facial swelling between Rheumazin and Feldene (control group). Both drugs were equally effective in the control of pain, with Rheumazin displaying less adverse effects than Feldene. Therefore, Rheumazin appears to provide a better risk/benefit ratio in the mandibular molar surgery. Since the side effects resulting from nonsteroidal anti-inflammatory drug administration are a severe limitation to the routine use of these drugs in clinical practice, our results suggest that Rheumazin can be a good choice for third molar removal treatment.