Adsorption and voltammetry of butyltin compounds

The adsorption of tributyltin onto materials commonly used for the construction of sampling and analytical equipment from aqueous solutions of varying ionic composition has been examined. The adsorption appears to be controlled by non-polar interactions between tributyltin and the surface involved. Since the speciation and hence polarity of tributyltin is affected by the ionic composition of the medium, the extent of adsorption is affected by the salinity and pH of a sample. The adsorption is rapid and, unless strategies are adopted to eliminate its effects, may render analytical results invalid. The electrochemistry of tributyltin, dibutyltin and monobutyltin, individually and in mixtures, has been investigated in aqueous media at mercury electrodes. The basic electrochemistry of each compound is summarised by the reaction BunSn (4-n)+ + (4-n)e- right left harpoons BunSn where n is the number of butyl groups attached to the tin atom. However, the electrochemistry of each compound is largely confined to the surface of the mercury electrode, and the simplicity of the above reaction is disrupted by polymerisation reactions and by butyl exchange processes occurring with the mercury electrode. When mixtures of butyltin compounds are present, the various processes that occur for each individual compound interfere with each other. A direct voltaminetric method for the determination of butyltin compounds in natural waters is therefore probably not possible.

Chiral organotin hydrides as enantioselective reducing agents

This thesis reports on the feasibility of the utilization of organotin hydrides as enaantioselective free radical reducing agents. The chiral organotin hydrides prepared contain the bulky chiral (1R,2S,5R)-menthyl substituent and in some cases also contain a stereogenic tin centre. Reaction of (1R,2S,5R)-menthylmagnesium chloride (MenMgC1) with triphenyltin chloride in THF proceeds with epimerization of the C-1 carbon of the menthyl group and results in a mixture of (1R,2S,5R)-menthyltriphenyltin and (1S,2S.5R)-menthyltriphenyltin. Addition of Lewis bases such as triphenylphosphine to the THF solution of triphenyltin chloride prior to the addition of the Grignard reagent suppresses epimerization and enables isolation of pure (1R,2S,5R)-menthyltriphenyltin. (1R,2S,5R)-Menthyltriphenyltin is the precursor for the synthesis of (1R,2S,5R)-menthyldiphenyltin hydride as well as (1R,2S,5R)-menthyl-containing organotin halide derivatives. A crystal structure of (1R,2S,5R)-menthylphenyltin dibromide and (1R,2S,5R)-menthylphenyltin dichloride confirmed the configuration of the menthyl substituent in these compounds. Reaction of MenMgC1 with diphenyltin dichloride in THF proceeds with no epimerization of the C-1 carbon of the menthyl group and bis((1R,2S,5R)-menthyl)diphenyltin is formed. A crystal structure of (1R,2S,5R)-menthyltriphenyltin confirmed the configuration of the menthyl substituent. Bis((1R,2S,5R)-menthyl)diphenyltin is used to form bis((1R,2S,5R)-menthyl)phenyltin hydride as well as other bis(1R,2S,5R)-menthyl derivatives. A series of chiral non-racemic triorganotin halides and triorganotin hydrides containing one or two (1R,2S,5R)-menthyl substituents as well as various potentially intramolecular coordination substituents were synthesized and characterized. The intramolecular substituents include the 8-(dimethylamino)naphthyl, 2-[(1S)-1-dimethylaminoethyl]phenyl, 2-(4,4-dimethyl-2-oxazoline)-5-methylphenyl and the 2-(4-(S)isopropyl-2-oxazoline)-5-methylphenyl substituents. Each compound containing a stereogenic tin centre was synthesized as diastereomeric mixtures. AM1 calculations of these compounds provide good qualitative predictability of the molecular geometries observed in the solid state as well as the diastereomeric ratios observed in solution. X-ray analysis of some of the organotin halides containing intramolecular coordination substituents revealed a tendency towards penta-coordination at the tin centre as a result of N-Sn interactions. The chiral organotin hydrides synthesized were found to be poor enantioselective free radical reducing agents. However, the addition of one molar equivalent of achiral or chiral Lewis acids to the free radical reduction reactions involving these organotin hydrides results in remarkable increases in enantioselectivity. There are numerous examples in which enantioselectivities exceed 80% and three examples of enantioselectivites which are equal and above 90% with one outstanding enantioselective outcome of ≥99%. These results appear to be the highest enantioselectivites for organotin hydride radical reductions reported to date. There is strong evidence to suggest that the chiral menthyl group of the organotin hydride directs the stereochemical outcome in the reduced product. The results also suggest that an increase in the number of menthyl substituents attached to tin or the introduction of intramolecular coordination substituents does not necessarily results in a greater increase in enantioselectivity. Preliminary studies into the synthesis of organotin hydrides containing Lewis acid functionalities are also reported. A zirconium chloride functionality was found to be incompatible with organotin hydride. However, an organotin hydride containing a trialkylboron Lewis acid functionality attached via an alkyl chain was successfully synthesized. Although this reagent was only stable in the preparative THF solution, it was still found to be effective at reducing benzaldehyde to benzyl alcohol.

Trace metal speciation in the Pieman River catchment, western Tasmania

The Pieman River catchment has seen continuous mining of economic deposits of gold, silver, lead, copper, zinc and tin since the 1870’s. Tributaries of this river which receive mining effluent, either directly or from acid mine drainage (AMID), have total metal concentrations considerably above background levels and are of regulatory concern. The lower Pieman River is however classified as a State Reserve in which recreational fishing and tourism are the major activities. It is therefore important that water entering the lower Pieman River from upstream hydroelectric impoundments is of high quality. Metals in natural waters exist in a variety of dissolved, colloidal and particulate forms. The bioavailability and hence toxicity of heavy metal pollutants is very dependant on their physico form. Knowledge of the speciation of a metal in natural aquatic environments is therefore necessary for understanding its geochemical behaviour and biological availability. Complexation of metal ions by natural ligands in aquatic systems is believed to play a significant role in controlling their chemical speciation. This study has investigated temporal and spatial variation in complexation of metal ions in the Pieman River. The influence of pH, temperature, organic matter, salinity, ionic strength and time has been investigated in a series of field studies and in laboratory-based experiments which simulated natural and anthropogenic disturbances. Labile metals were measured using two techniques in various freshwater and estuarine environments. Diffusive gradients in thin-films (DGT) allowed in situ measurement of solution speciation whilst differential pulse anodic stripping voltammetry (DPASV) was used to measure labile metal species in water samples collected from the catchment. Organic complexation was found to be a significant regulating mechanism for copper speciation and the copper-binding ligand concentration usually exceeded the total copper concentration in the river water. Complexation was highly dependent on pH and at the river-seawater interface was also regulated by salinity, probably as a result of competitive complexation by major ions in seawater (eg. Ca 2+ ions). Zinc complexation was also evident, however total zinc concentrations in the water column often far exceeded the potential binding capacity of available ligands. In addition to organic complexation, Zn speciation may also be associated with adsorption by flocculated or resuspended colloidal Mn and/or Fe oxyhydroxides. Metal ion complexation and hence speciation was found to be highly variable within the Pieman River catchment. This presents major difficulties for environmental managers, as it is therefore not possible to make catchment-wide assumptions about the bioavailability of these metals. These results emphasise the importance of site-specific sampling protocols and speciation testing, ideally incorporating continuous, in situ monitoring.

Ti6Ta4Sn alloy and subsequent scaffolding for bone tissue engineering

Porous titanium (Ti) and titanium alloys are promising scaffold biomaterials for bone tissue engineering, because they have the potential to provide new bone tissue ingrowth abilities and low elastic modulus to match that of
natural bone. In the present study, a new highly porous Ti6Ta4Sn alloy scaffold with the addition of biocompatible alloying elements (tantalum (Ta) and tin (Sn)) was prepared using a space-holder sintering method. The
strength of the Ti6Ta4Sn scaffold with a porosity of 75% was found to be significantly higher than that of a pure Ti scaffold with the same porosity. The elastic modulus of the porous alloy can be customized to match that of
human bone by adjusting its porosity. In addition, the porous Ti6Ta4Sn alloy exhibited an interconnected porous structure, which enabled the ingrowth of new bone tissues. Cell culture results revealed that human SaOS₂
osteoblast-like cells grew and spread well on the surfaces of the solid alloy, and throughout the porous scaffold. The surface roughness of the alloy showed a significant effect on the cell behavior, and the optimum surface
roughness range for the adhesion of the SaOS2 cell on the alloy was 0.15 to 0.35 mm. The present study illustrated the feasibility of using the porous Ti6Ta4Sn alloy scaffold as an orthopedic implant material with a special
emphasis on its excellent biomechanical properties and in vitro biocompatibility with a high preference by osteoblast-like cells.

Computational investigations on periodic trends in Group 14 chemistry

Describes the use of computer-aided molecular modelling to investigate trends in the chemistry of the Group 14 elements, namely carbon, silicon, germanium, tin and lead. The chemical behaviour of two classes of molecules containing Group 14 elements was related to trends in the fundamental properties of these elements.

Cytotoxicity of titanium and titanium alloying elements

It is commonly accepted that titanium and the titanium alloying elements of tantalum, niobium, zirconium, molybdenum, tin, and silicon are biocompatible. However, our research in the development of new titanium alloys for biomedical applications indicated that some titanium alloys containing molybdenum, niobium, and silicon produced by powder metallurgy show a certain degree of cytotoxicity. We hypothesized that the cytotoxicity is linked to the ion release from the metals. To prove this hypothesis, we assessed the cytotoxicity of titanium and titanium alloying elements in both forms of powder and bulk, using osteoblast-like SaOS₂ cells. Results indicated that the metal powders of titanium, niobium, molybdenum, and silicon are cytotoxic, and the bulk metals of silicon and molybdenum also showed cytotoxicity. Meanwhile, we established that the safe ion concentrations (below which the ion concentration is non-toxic) are 8.5, 15.5, 172.0, and 37,000.0 μg/L for molybdenum, titanium, niobium, and silicon, respectively.

Are shocks to commodity prices persistent?

This paper considers the issue of whether shocks to ten commodity prices (gold, silver, platinum, copper, aluminum, iron ore, lead, nickel, tin, and zinc) are persistent or transitory. We use two recently developed unit root tests, namely the Narayan and Popp (NP) [14] test and the Liu and Narayan (LN) [26] test. Both tests allow for two structural breaks in the data series. Using the NP test, we are able to reject the unit root null for iron ore and tin. Using the GARCH-based unit root test of LN, we are able to reject the unit root null for five commodity prices (iron ore, nickel, zinc, lead, and tin). Our findings, thus, suggest that only shocks to gold, silver, platinum, aluminum, and copper are persistent.

pH-detachable polymer brushes formed using titanium−diol coordination chemistry and living radical polymerization (RAFT)

pH-detachable poly(styrene) brushes formed on indium−tin oxide (ITO) glass substrates using metal complex chemistry and reversible addition−fragmentation chain transfer (RAFT) polymerization was described. These pH-detachable polymeric brushes were generated using both “graft-from” and “graft-to” methodologies. The methodologies involved either the surface self-assembly of catechol-functional RAFT agents (graft-from) or catechol-terminal polymer chains (graft-to) onto the ITO substrate via titanium−diol coordination. The stepwise functionalization of the ITO glass surfaces was characterized successfully using X-ray photoelectron spectroscopy (XPS) and contact angle measurement. Poly(styrene) brushes generated using the “graft-from” method were denser than those generated using the “graft-to” method, as exemplified by atom force microscopy (AFM) and quantified using cyclic voltammetry. Poly(styrene) brushes assembled using both methods could be detached easily by manipulating the pH of the brush environment. Cyclic voltammetry was utilized to calculate precisely the surface coverage of the RAFT functionality and polymeric brush density.

Banging on metal oil can SFX

A sound recording of banging on a metal oil can.

Fabrication of Ti14Nb4Sn alloys for bone tissue engineering applications

In this paper, porous Ti14Nb4Sn alloys were fabricated using a space holder sintering method, resulting in a porosity of ~70%. Scanning electron microscopy (SEM) analyses revealed a combination of both macropore and micropore structures. The fabricated titanium alloy scaffolds exhibited a similar structure to that of natural bone, which is expected to improve bone implant longevity. Bacterial cells of Pseudomonas aeruginosa ATCC 9027 were employed for the in vitro test.