A new experimental procedure to obtain titania powders as anatase phase by a sol-gel process

Titania powders were synthesized by a sol-gel process using titanium tetrabutoxide as precursor. The syntheses were performed in water or in solutions of dimethylformamide (dmf) or dimethylsulfoxide (dmso). It is demonstrated, by X-ray diffraction patterns of the synthesized powders, that the samples obtained in dmf or dmso solutions are crystalline (anatase phase) with some minor amount of brookite phase, whereas the sample synthesized in water is amorphous. The anatase phase can be obtained independently of any previous or further treatment of the synthesized powder, such as hydrothermal or heat treatment, providing a new, simple, quick and inexpensive route to synthesize anatase powders. From the peak broadening of the anatase (101) diffraction, the crystallite sizes were calculated as 6 nm.

Estratégia de simplificação molecular no planejamento racional de fármacos: a descoberta de novo agente cardioativo

In this article are described examples of the successful use of molecular simplification strategy in the discovery of new drugs from bioactive natural products and synthetic compounds. The discovery of a new cardiotonic derivative (37, 2-thienylidene-3,4-methylenedioxybenzoylhydrazine; LASSBio-294), efficiently synthesized from Brazilian natural product and structurally designed by molecular simplification of active pyridazinone compounds reported in the literature, is described. A brief description of the pharmacological profile of this new cardiotonic lead-compound, belonging to the N-acylhydrazone (NAH) class, is also reported herein.

Azolium-based systems: application of an anion exchange resin (A- form) method and 1H NMR analysis of the charged-assisted (CH)+·anion hydrogen bonds

The counteranion exchange of quaternary 1,2,3-triazolium salts was examined using a simple method that permitted halide ions to be swap for a variety of anions using an anion exchange resin (A¯ form). The method was applied to 1,2,3-triazolium-based ionic liquids and the iodideto- anion exchange proceeded in excellent to quantitative yields, concomitantly removing halide impurities. Additionally, an anion exchange resin (N3¯ form) was used to obtain the benzyl azide from benzyl halide under mild reaction. Likewise, following a similar protocol, bis(azidomethyl)arenes were also synthesized in excellent yields. The results of a proton NMR spectroscopic study of simple azolium-based ion pairs are discussed, with attention focused on the significance of the charged-assisted (CH)+···anion hydrogen bonds of simple azolium systems such as 1-butyl-3-methylimidazolium and 1-benzyl-3-methyl-1,2,3-triazolium salts.

Azolium-based systems: application of an anion exchange resin (A- form) method and 1H NMR analysis of the charged-assisted (CH)+·anion hydrogen bonds

The counteranion exchange of quaternary 1,2,3-triazolium salts was examined using a simple method that permitted halide ions to be swap for a variety of anions using an anion exchange resin (A¯ form). The method was applied to 1,2,3-triazolium-based ionic liquids and the iodideto- anion exchange proceeded in excellent to quantitative yields, concomitantly removing halide impurities. Additionally, an anion exchange resin (N3¯ form) was used to obtain the benzyl azide from benzyl halide under mild reaction. Likewise, following a similar protocol, bis(azidomethyl)arenes were also synthesized in excellent yields. The results of a proton NMR spectroscopic study of simple azolium-based ion pairs are discussed, with attention focused on the significance of the charged-assisted (CH)+···anion hydrogen bonds of simple azolium systems such as 1-butyl-3-methylimidazolium and 1-benzyl-3-methyl-1,2,3-triazolium salts.

The synthesis of 1,2,3,6,6a,7-hexahydro-7-methyl-5-imino-1H-pyrrolo[1,2-c]imidazolo[5,4-b]indole

N-3-(1-Methylindol-3-yl)propan-N-(2,2,2-trichloroethoxysulfonyl)guanidine was synthesized from 3-formyl-1-methylindole in six steps and subjected to conditions intended to convert the side-chain into a 2-iminotetrahydropyrimidine- containing product, of relevance to a possible synthesis of the aplicyanins. An alternative reaction course was observed, resulting in the formation of a new tetracyclic system.

Solubilization of decane into gemini surfactant with a modified Jeffamine backbone: Design of hierarchical porous silica

Herein, we have investigated the solubilization of decane into a novel nonionic gemini surfactant, myristoyl-end capped Jeffamine, synthesized from a polyoxyalkyleneamine (ED900). Starting from this system, porous silica materials have been prepared. Performing the hydrothermal treatment at low temperature, a slight increase of the mesopore diameter is observed in the presence of decane. Increasing the temperature of the hydrothermal treatment, no swelling effect of decane is detected. By contrast, the pore diameter decreases but better mesopore homogeneity and a larger wall thickness are obtained. At high decane concentration the new myristoyl-end capped Jeffamine/decane/water system forms oil-in-water emulsions, which are used as template for the formation of hierarchical porous silica materials.

Tailored Jeffamine molecular tools for ordering mesoporous Silica

Herein, we report the formation of organized mesoporous silica materials prepared from a novel nonionic gemini surfactant, myristoyl-end capped Jeffamine, synthesized from a polyoxyalkyleneamine (ED900). The behavior of the modified Jeffamine in water was first investigated. A direct micellar phase (L1) and a hexagonal (H1) liquid crystal were found. The structure of the micelles was investigated from the SAXS and the analysis by Generalized Indirect Fourier Transformation (GIFT), which show that the particles are globular of coreshell type. The myristoyl chains, located at the ends of the amphiphile molecule are assembled to form the core of the micelles and, as a consequence, the molecules are folded over on themselves. Mesoporous materials were then synthesized from the self-assembly mechanism. The recovered materials were characterized by SAXS measurements, nitrogen adsorptiondesorption analysis, transmission and scanning electron microscopy. The results clearly evidence that by modifying the synthesis parameters, such as the surfactant/silica precursor molar ratio and the hydrothermal conditions, one can control the size and the nanostructuring of the resulting material. It was observed that, the lower the temperature of the hydrothermal treatment, the better the mesopore ordering.

Design and production of protein nanostructures for biomolecular detection

Particulate nanostructures are increasingly used for analytical purposes. Such particles are often generated by chemical synthesis from non-renewable raw materials. Generation of uniform nanoscale particles is challenging and particle surfaces must be modified to make the particles biocompatible and water-soluble. Usually nanoparticles are functionalized with binding molecules (e.g., antibodies or their fragments) and a label substance (if needed). Overall, producing nanoparticles for use in bioaffinity assays is a multistep process requiring several manufacturing and purification steps. This study describes a biological method of generating functionalized protein-based nanoparticles with specific binding activity on the particle surface and label activity inside the particles. Traditional chemical bioconjugation of the particle and specific binding molecules is replaced with genetic fusion of the binding molecule gene and particle backbone gene. The entity of the particle shell and binding moieties are synthesized from generic raw materials by bacteria, and fermentation is combined with a simple purification method based on inclusion bodies. The label activity is introduced during the purification. The process results in particles that are ready-to-use as reagents in bioaffinity. Apoferritin was used as particle body and the system was demonstrated using three different binding moieties: a small protein, a peptide and a single chain Fv antibody fragment that represents a complex protein including disulfide bridge.If needed, Eu3+ was used as label substance. The results showed that production system resulted in pure protein preparations, and the particles were of homogeneous size when visualized with transmission electron microscopy. Passively introduced label was stably associated with the particles, and binding molecules genetically fused to the particle specifically bound target molecules. Functionality of the particles in bioaffinity assays were successfully demonstrated with two types of assays; as labels and in particle-enhanced agglutination assay. This biological production procedure features many advantages that make the process especially suited for applications that have frequent and recurring requirements for homogeneous functional particles. The production process of ready, functional and watersoluble particles follows principles of “green chemistry”, is upscalable, fast and cost-effective.

Cristalização e taxa crítica de resfriamento para vitrificação do poli(sebacato de decametileno)

We synthesized Poly(decamethylene sebacate) - P10MS - and studied its overall crystallization rates in a range of temperatures using Differential Scanning Calorimetry in isothermal conditions, which enabled us to identify the crystallization mechanism by means of the Johnson-Mehl-Avrami-Kolmogorov equation. The critical cooling rate (Rc) to vitrify the P10MS was determined using a non-isothermal method proposed by Barandiarán & Colmenero (BC). The value of Rc is around 50-250 K/s, which confirms the experimentally observed difficulty to vitrify this polymer.

Azolium-based systems: application of an anion exchange resin (A- form) method and 1H NMR analysis of the charged-assisted (CH)+·anion hydrogen bonds

The counteranion exchange of quaternary 1,2,3-triazolium salts was examined using a simple method that permitted halide ions to be swap for a variety of anions using an anion exchange resin (A¯ form). The method was applied to 1,2,3-triazolium-based ionic liquids and the iodideto- anion exchange proceeded in excellent to quantitative yields, concomitantly removing halide impurities. Additionally, an anion exchange resin (N3¯ form) was used to obtain the benzyl azide from benzyl halide under mild reaction. Likewise, following a similar protocol, bis(azidomethyl)arenes were also synthesized in excellent yields. The results of a proton NMR spectroscopic study of simple azolium-based ion pairs are discussed, with attention focused on the significance of the charged-assisted (CH)+···anion hydrogen bonds of simple azolium systems such as 1-butyl-3-methylimidazolium and 1-benzyl-3-methyl-1,2,3-triazolium salts.

The synthesis of 1,2,3,6,6a,7-hexahydro-7-methyl-5-imino-1H-pyrrolo[1,2-c]imidazolo[5,4-b]indole

N-3-(1-Methylindol-3-yl)propan-N-(2,2,2-trichloroethoxysulfonyl)guanidine was synthesized from 3-formyl-1-methylindole in six steps and subjected to conditions intended to convert the side-chain into a 2-iminotetrahydropyrimidine- containing product, of relevance to a possible synthesis of the aplicyanins. An alternative reaction course was observed, resulting in the formation of a new tetracyclic system.

Síntese e caracterização de um composto VOPO4-DMA

A layered matrix, alpha-VOPO4.2H2O was used as host species to produce a VOPO4.dimethylacetamide intercalation compound. The oxovanadium matrix and the synthesized hybrid were characterized by elemental analysis, infrared spectroscopy, thermogravimetry, X-ray diffractometry and SEM microscopy. The X-ray diffraction patterns show that the VOPO4.dimethylacetamide compound is amorphous, but can be turned lamellar after a solubilization-crystallization process. The SEM micrographs obtained for the VOPO4-dimethylacetamide hybrid matrix show that the microstructure of VOPO4.2H2O is changed after reaction, with a delamination of the oxovanadium matrix.

Síntese e avaliação da atividade fitotóxica de novos análogos oxigenados do ácido helmintospórico

Several compounds related to helminthosporic acid (3) were synthesized via the [3+4] cycloaddition. The reaction of 3-hydroxymethyl-2-methylfuran (12) with 1,1,3,3-tetrabromo-4-methylpentan-2-one (13) resulted in 7-hydroxymethyl-4alpha-isopropyl-1alpha-methyl-8-oxabicyclo[3.2.1]oct-6-en-3-one (8) (37%) and 7-hydroxymethyl-2alpha-isopropyl-1alpha-methyl-8-oxabicyclo[3.2.1]oct-6-en-3-one (14) (12%), which were converted into 7-formyl-4alpha-isopropyl-1alpha-methyl-8-oxabicyclo[3.2.1]oct-6-en-3-one (16) (32% from 8) and 7-formyl-2alpha-isopropyl-1alpha-methyl-8-oxabicyclo[3.2.1]oct-6-en-3-one (18) (40% from 14), respectively. Reduction of (8) resulted in 7-hydroxymethyl-4alpha-isopropyl-1alpha-methyl-8-oxabicyclo[3.2.1]oct-6 -en-3alpha-ol (11) (63% from 8) and 7-hydroxymethyl-4alpha-isopropyl-1alpha-methyl-8-oxabicyclo[3.2.1]oct-6-en-3 beta-ol (15) (30% from 8). The 4alpha-isopropyl-1alpha-methyl-3-oxo-8-oxabicyclo[3.2.1]oct-6-en-7-oic acid (19) was obtained by oxidation of (16) (78%). The results of biological tests are described in details. The best result was observed for compound (15) that caused 76% inhibition on the root growth of D. tortuosum.

Tratamento dos resíduos gerados na síntese de polianilina em escala pré-piloto

Polyaniline (PAni) is one of the most studied conducting polymer. It can be synthesized by two methods: electrochemical or chemical oxidation. The chemical oxidation is more adequate to produce large quantities of polymer. Regardless of the synthesis scale, the treatment of the residues before its final destination is very important and necessary because it contains toxic aniline derivatives (carcinogens in some cases), acids and inorganic salts, both with low toxicity. In this work we discuss the methods used to treat these residues and to eliminate and discard the toxic substances. These were extracted from the reaction residues by using activated coal and the pH of the residue was neutralized.

Estudo experimental e teórico da redução de bases de Schiff derivadas da 3,3-difenilpropilamina

A series of seven Schiff bases have been synthesized from 3,3-diphenylpropilamine and substituted benzaldehydes. These imines were treated with NaBH4 in ethanol affording the corresponding amines in 98-55% yields. A molecular modeling study was performed with the Schiff bases in order to compare the theoretical parameters with the experimental results. The theoretical parameters were obtained by AM1 and PM3 semi-empirical methods. The analysis of charge, electron densities and LUMO coefficients suggested that the most favorable interactions should occur with Schiff bases containing electron-donating groups, in accordance with experimental yields, showing that the higher reactivity is due to higher electrophilic character of imine carbons.