Atributos químicos do solo sob plantio direto afetado por sistemas de culturas e fontes de adubação

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Remote Sensing Detection of atmospheric pollutants using Lidar, Sodar and correlation with air quality data in an industrial area

Optical remote sensing techniques have obvious advantages for monitoring gas and aerosol emissions, since they enable the operation over large distances, far from hostile environments, and fast processing of the measured signal. In this study two remote sensing devices, namely a Lidar (Light Detection and Ranging) for monitoring the vertical profile of backscattered light intensity, and a Sodar (Acoustic Radar, Sound Detection and Ranging) for monitoring the vertical profile of the wind vector were operated during specific periods. The acquired data were processed and compared with data of air quality obtained from ground level monitoring stations, in order to verify the possibility of using the remote sensing techniques to monitor industrial emissions. The campaigns were carried out in the area of the Environmental Research Center (Cepema) of the University of São Paulo, in the city of Cubatão, Brazil, a large industrial site, where numerous different industries are located, including an oil refinery, a steel plant, as well as fertilizer, cement and chemical/petrochemical plants. The local environmental problems caused by the industrial activities are aggravated by the climate and topography of the site, unfavorable to pollutant dispersion. Results of a campaign are presented for a 24- hour period, showing data of a Lidar, an air quality monitoring station and a Sodar. © 2011 SPIE.

Simulation of dynamic pinion course using Runge-Kutta's method and impact modeling

Once defined the relationship between the Starter Motor components and their functions, it is possible to develop a mathematical model capable to predict the Starter behavior during operation. One important aspect is the engagement system behavior. The development of a mathematical tool capable of predicting it is a valuable step in order to reduce the design time, cost and engineering efforts. A mathematical model, represented by differential equations, can be developed using physics laws, evaluating force balance and energy flow through the systems degrees of freedom. Another important physical aspect to be considered in this modeling is the impact conditions (particularly on the pinion and ring-gear contact). This work is a report of those equations application on available mathematical software and the resolution of those equations by Runge-Kutta's numerical integration method, in order to build an accessible engineering tool. Copyright © 2011 SAE International.

Fracionamento da fertirrigação e seu efeito na produção da alface sob ambiente protegido

Buscando quantificar o efeito do parcelamento da fertirrigação no desenvolvimento da alface, esta pesquisa procurou verificar o número de parcelas de fertirrigação que apresentasse o melhor desempenho no crescimento da cultura. O experimento se deu em blocos casualizados, com três repetições, quatro tratamentos de fertirrigação e três lâminas de irrigação (L1, L2 e L3). Em um dos tratamentos de fertirrigação (F1), toda a adubação necessária se deu no início do plantio; no tratamento F2, a metade da adubação se deu no início do plantio e a outra metade no meio do ciclo da cultura, uma vez planejada a colheita em 40 dias após o plantio; o tratamento F3 foi fracionado: 1/3 da adubação no início do plantio, 1/3 depois de 13 dias e o ultimo terço após 26 dias do plantio; o tratamento F4 seguiu o mesmo raciocínio, fracionando a aplicação em 4 partes, de 10 em 10 dias. Logo, os quatro tratamentos de fertirrigação receberam a mesma dosagem de fertilizantes. Os resultados permitiram concluir que a aplicação F1 resultou no pior desempenho, com massa fresca de 135,06 gramas por planta, enquanto o melhor resultado se deu no tratamento F2, com massa fresca de 161,40 g. Em todas as lâminas, o parcelamento F3 resultou em sistema radicular mais desenvolvido. O tratamento L1 apresentou em média maior desenvolvimento das raízes, seguido do L2 e L3. O tratamento L1 apresentou menor condutividade elétrica no extrato da solução dos vasos, sendo o único tratamento que diferiu estatisticamente dos demais.

Níveis de fertirrigação na avaliação das características morfofisiológicas em mudas de pimenta malagueta

O presente trabalho teve o objetivo de avaliar as características morfofisiológicas de mudas de pimenta malagueta (Capsicum frutescens) sob diferentes níveis de fertirrigação, utilizando-se fertilizante líquido 10-10-10 (N-P-K). O experimento foi realizado na Faculdade de Ciências Agrárias da Universidade Federal da Grande Dourados. O delineamento experimental foi em blocos casualizados (DBC), com seis doses de fertilizante líquido (0; 2,5; 5,0; 10,0; 20,0 e 40 mL L-1) diluídos na água de irrigação e quatro repetições. As mudas foram produzidas em viveiro telado, em bandejas de 128 células preenchidas com substrato. Realizou-se uma fertirrigação, aos 15 dias após a semeadura ( DAS). Avaliou-se, aos 30 dias após a semeadura, o número de folhas, o comprimento da parte aérea e da raiz, a massa fresca e seca da parte aérea e da raiz, a área foliar e o teor de clorofila. A dose de 25 mL L-1 do fertilizante líquido 10-10-10, aplicada via fertirrigação, é recomendada para a produção de mudas de pimenta malagueta, embora tenha havido aumento da massa seca de raízes e parte aérea em dose maior.

Influence of organic and mineral soil fertilization on essential oil of Spilanthes oleracea cv. Jambuarana

In the present study, the composition of essential oil of leaves and inflorescences of jambu (Spilanthes oleracea. Jambuarana), under organic manuring and mineral fertilization, was stuhed. Jambu plants show important chemical properties and their production has been addressed for the extraction of the essential oils for cosmetics industries, due to their pharmacolopcal properties. The experimental area of treatments contained urea as mineral fertilizer (120 g m2), applied twice and organic fertilizer (8 kg m2), applied at the planting. Jambu leaves and flowers were harvested twice: the first at 90 days after seedling transplantation and at the opening of the flower buds. Branches were cut at 7 cm from the soil, thus new branches can bud for the accomplishment of the second crop which happened 40 days after the re-budhng. The essential oil was analyzed by gas chromatography coupled with mass-spectrometry. According to our results the most representative compounds were trans-caryophyllene, germacrene-D, 1-dodecene, spathulenol and spilanthol (a compound presenting anesthetic properties) occurring in inflorescences. Fertilization procedure does not affect the content and the quality of the essential oil in Jambu plants. © 2012 Academic Journals Inc.

produção de mudas de maracujazeiro amarelo submetidas à salinidade em solo com biofertilizante bovino

The experiment was conducted in a greenhouse from May 1 to July 31, 2008, in Areia county, Paraiba State, PB, Brazil, in order to evaluate the effects of irrigation water salinity on initial growth of the passionfruit seedlings in non-saline substrate with and without bovine biofertilizer. The treatments were distributed in a completely randomized design, with three replications and twelve plants per plots, in a factorial arrangement 5 × 2 × 2, corresponding the former to the levels of salinity in the irrigation water: 0.5; 1.0; 2.0; 3.0 and 4.0 dS m-1, in soils with and without bovine biofertilizer applied at two moments (25 and 65 days after seedling emergence). The growth of the seedlings and the soil electrical conductivity were evaluated at the end of the experiment. The biofertilizer was diluted in a low saline water at a 1:1 ratio and was applied once two days before sowing, corresponding to 10% of the substrates volume. The increase in water salinity inhibited the growth in height of plants, leaf area and root length, but always to a lesser extent in the treatments with bovine biofertilizer. The increase in electrical conductivity of the irrigation water elevated the soil salinity, independently of the addition of biofertilizer.

Ammonia volatilization losses from surface-applied urea with urease and nitrification inhibitors

Urease inhibitor (UI) and nitrification inhibitor (NI) have the potential to improve N-use efficiency of applied urea and minimize N losses via gaseous emissions of ammonia (NH 3) to the atmosphere and nitrate (NO3-) leaching into surface and ground water bodies. There is a growing interest in the formulations of coating chemical fertilizers with both UI and NI. However, limited information is available on the combined use of UI and NI applied with urea fertilizer. Therefore the aim of this study was to investigate the effects of treating urea with both UI and NI to minimize NH 3 volatilization. Two experiments were set up in volatilization chambers under controlled conditions to examine this process. In the first experiment, UR was treated with the urease inhibitor NBPT [N-(n-butyl) thiophosphoric acid triamide] at a rate of 1060 mg kg -1 urea and/or with the nitrification inhibitor DCD (dicyandiamide) at rates equivalent to 5 or 10% of the urea N. A randomized experimental design with five treatments and five replicates was used: 1) UR, 2) UR + NBPT, 3) UR + DCD 10%, 4) UR + NBPT + DCD 5%, and 5) UR + NBPT + DCD 10%. The fertilizer treatments were applied to the surface of an acidic Red Latosol soil moistened to 60% of the maximum water retention and placed inside volatilization chambers. Controls chambers were added to allow for NH 3 volatilized from unfertilized soil or contained in the air that swept over the soil surface. The second experiment had an additional treatment with surface-applied DCD. The chambers were glass vessels (1.5 L) fit with air inlet and outlet tubings to allow air to pass over the soil. Ammonia volatilized was swept and carried to a flask containing a boric acid solution to trap the gas and then measured daily by titration with a standardized H 2SO 4 solution. Continuous measurements were recorded for 19 and 23 days for the first and second experiment, respectively. The soil samples were then analyzed for UR-, NH4+-, and NO3--N. Losses of NH 3 by volatilization with unamended UR ranged from 28 to 37% of the applied N, with peak of losses observed the third day after fertilization. NBPT delayed the peak of NH 3 losses due to urease inhibition and reduced NH 3 volatilization between 54 and 78% when compared with untreated UR. Up to 10 days after the fertilizer application, NH 3 losses had not been affected by DCD in the UR or the UR + NBPT treatments; thereafter, NH 3 volatilization tended to decrease, but not when DCD was present. As a consequence, the addition of DCD caused a 5-16% increase in NH 3 volatilization losses of the fertilizer N applied as UR from both the UR and the UR + NBPT treatments. Because the effectiveness of NBPT to inhibit soil urease activity was strong only in the first week, it could be concluded that DCD did not affect the action of NBPT but rather, enhanced volatilization losses by maintaining higher soil NH4+ concentration and pH for a longer time. Depending on the combination of factors influencing NH 3 volatilization, DCD could even offset the beneficial effect of NBPT in reducing NH 3 volatilization losses. © 2012 Elsevier Ltd.

Unbiased approach to diagnose the nutrient status of red guava (Psidium guajava)

Fertilization of guava relies on soil and tissue testing. The interpretation of tissue test is currently conducted by comparing nutrient concentrations or dual ratios with critical values or ranges. The critical value approach is affected by nutrient interactions. Nutrient interactions can be described by dual ratios where two nutrients are compressed into a single expression or a ternary diagrams where one redundant proportion can be computed by difference between 100% and the sum of the other two. There are D(D-1) possible dual ratios in a D-parts composition and most of them are thus redundant. Nutrients are components of a mixture that convey relative, not absolute information on the composition. There are D-1 balances between components or ingredients in any mixture. Compositional data are intrinsically redundant, scale dependent and non-normally distributed. Based on the principles of equilibrium and orthogonality, the nutrient balance concept projects D-1 isometric log ratio (ilr) coordinates into the Euclidean space. The D-1 balances between groups of nutrients are ordered to reflect knowledge in plant physiology, soil fertility and crop management. Our objective was to evaluate the ilr approach using nutrient data from a guava orchard survey and fertilizer trials across the state of São Paulo, Brazil. Cationic balances varied widely between orchards. We found that the Redfield N/P ratio of 13 was critical for high guava yield. We present guava yield maps in ternary diagrams. Although the ratio between nutrients changing in the same direction with time is often assumed to be stationary, most guava nutrient balances and dual ratios were found to be non-stationary. The ilr model provided an unbiased nutrient diagnosis of guava. © ISHS.

Evaluation of soil management and use in an Ultisol in a guava orchard in comparison with a sugarcane field and native forest area

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Propagação in vitro de Cattleya trianaei (Linden & Reichenbach fil.) (Orchidaceae) em meios de culturas e com doses de fertilizante comercial

The use of culture media produced with commercial fertilizers can represent a simple and low cost alternative for commercial orchid propagation. The aim of this study was to evaluate the in vitro growth of plantlets of Cattleya trianaei in culture medium MS reduced and and formulated with Peters® NPK 10-30-20 in different doses. 90 day-old plantlets with two leaflets were submitted to five treatments (T1 - reduced MS; T2 - Peters® 1 g L -1; T3 - Peters® 2 g L-1; T4 - Peters® 3 g L -1 and T5 - Peters® 5 g L-1) arranged in a completely randomized design with five replicates with 25 plantlets for each treatment and incubated during 180 days, with subcultures at each 60 days, when the number of roots, root length, number of leaves, shoot length and shoot fresh matter were evaluated. The simplified culture medium with fertilizer Peters® 3 g L -1 presented results statistically different as for the number of roots, number of leaves, shoot length and shoot fresh matter and it can be recommended for in vitro growth of this ornamental orchid.

Fertilizing lychee plants with phosphorus at time of planting in Brazil

The objective of this research was to study the effects of P fertilizers applied at time of planting on lychees' nutritional status and on plant growth. The treatments consisted of five doses of P: zero, 50, 100, 200, and 300 g of P2O5 per plant, furnished by triple superphosphate. Plant diameter was evaluated during two years and the plants' nutritional status on the second year. The second year foliar levels of macro and micronutrients (with the exception of Zn) were increased by the P fertilizer. The orchard's initial development, especially during the second year, was also influenced by the fertilizer. The P doses of 164 and 158 g of P2O5 per plant resulted in the largest plant diameter after the first and the second year, respectively. These doses were found to be associated with a foliar P level of <1.4 g kg-1. © 2012 Renato de Mello Prado et al.

Phosphorus and potassium budget in the soil-plant system in crop rotations under no-till

Soil management and crop rotations can affect P and K budget in soil, decreasing losses, and increasing fertilizer use efficiency. The P and K budget in the soil-plant system at depths up to 60. cm was studied for different soil managements and crop rotations under no-till for three years in Botucatu, São Paulo, Brazil. The investigated crop rotations were: triticale (X Triticosecale) and sunflower (Helianthus annuus) cropped in autumn-winter; pearl millet (Pennisetum glaucum), forage sorghum (Sorghum bicolor), and Sunn hemp (Crotalaria juncea) were grown in the spring, as well as an additional treatment with chiseling followed by a fallow period; and soybean (Glycini max, L., Merril) was cropped in the summer. Each year triticale and sunflower were grown in plots and pearl millet, forage sorghum, Sunn hemp and of chisel/fallow in sub-plots. The triticale/millet rotation led to the largest decrease in available P within the 0-0.60. m layer of the soil profile and the largest K increase within the 0-0.05. m layer. Potassium mobility in the soil profile and the increases in the available K content in the 0.40-0.60. m layer were independent of the management system. Crop rotations with or without chiseling are not effective in preventing soil P losses. There is considerable K leaching below 0.60. m, but chiseling and the use of high K accumulating plants as triticale results in lower K losses. © 2012 Elsevier B.V.

AMMONIUM AND NITRATE IN SOIL AND RATOON SUGARCANE GROWN IN FUNCTION OF NITROGEN ON OXISOL

After harvest, sugarcane residues left on the soil surface can alter nitrogen (N) dynamics in the plant-soil system. In Oxisols, the nitrogen fertilizer applied had its effects on the levels of ammonium and nitrate in the soil, N concentration in the plant leaves, and on the growth and productivity of second ratoon plants. The N rates tested were of 0, 60, 120, 180, and 240 kg ha-1. Each treatment was replicated four times. Four months after the experiment was started, ammonium and nitrate concentration in the soil, N levels in plant leaves, and plant growth were evaluated. Productivity was evaluated 11 months after the experiment was set. By increasing the content of mineral N in soil, plant growth variables reflected differences in the production of stems; however, it did not affect foliar N. The use of leaf analysis was not important to assess the nutritional status of nitrogen in the ratoon sugarcane. Nitrogen concentration in soil was affected by nitrogen fertilization, but not the N content in leaves. The rate of 138 kg N ha-1enabled greater production of sugarcane stalks (140 t ha-1). © 2013 Copyright Taylor and Francis Group, LLC.

Condutividade elétrica da solução nutritiva e acúmulo de macro e micronutrientes no cultivo de crisântemo

The study of growth and uptake of nutrients is important to determine the times of increased demand in order to schedule the fertigation. The present research was developed with the objective of evaluating the effects of different levels of electrical conductivity on growth and accumulation of nutrients in chrysanthemum plants under greenhouse conditions. The electrical conductivity levels on the applied solution were 1.42, 1.65, 1.89, 2.13 and 2.36 dS m-1 (bud vegetative stage); 1.71, 1.97, 2.28, 2.57 and 2.85 dS m-1 (bud stage). The dry mass of the aerial portion of the plant and the contents of macronutrients and micronutrients were determined every 14 days. The nutrient accumulation in chrysanthemum plant showed similar trend as compared to dry matter accumulation. The nutrients presented the following order of absorption: K>N>Ca>Mg>P>S (1425, 892, 184, 150, 110 and 59 mg plant-1) and Fe>Zn>B>Mn>Cu (2254, 2219, 1725, 1287, 210 μg plant-1). The content of most nutrients increased with increase in electrical conductivity of the solution, without salt effect up to EC of 2.85 dS m-1.