Analytical model of pass-by-pass strain in rod (or bar) rolling and its applications to prediction of austenite grain size

Rod rolling is a process where the deformation state of the workpiece between the work rolls is quite different from the strip rolling process. However, in most microstructure evolution models, the simple area strains (natural logarithm of the area reduction ratio) multiplied by a constant have been used to compute pass-by-pass evolution of austenite grain size (AGS) in rod (or bar) rolling, without any verification. The strains at a given pass play a crucial role in determining the recrystallization behavior (static or dynamic). In this study, an analytical model that calculates the pass-by-pass strain and strain rate in rod rolling has been developed and verified by conducting four-pass (oval–round) bar and plate rolling experiments. Numerical simulations have then been carried out for the four-pass rolling sequence using the area strain model and the new analytical model, focusing on the effect of the method for calculating the strain on the recrystallization behavior and evolution of AGS. The AGS predicted was compared with those obtained from hot torsion tests. It is shown that the analytical model developed in this study is more appropriate in the analysis of bar (or rod) rolling. It was found that the recrystallization behavior and evolution of AGS during this process were influenced significantly by the calculation method for the deformation parameters (strain and strain rate). The pass-by-pass strain obtained from the simple area strain model is inadequate to be used as an input to the equations for recrystallization and AGS evolution under these rolling conditions.

Culture-based fisheries in small reservoirs in northern Vietnam: effect of stocking densities and species combinations

This study was conducted in 20 reservoirs, ranging in size from 4 to 30 ha, in the mountainous, northern region of Vietnam, in ThaiNguyen and YenBai provinces, over two growth cycles in 2002/03 and 2003/04. The reservoirs are leased by farmers for fishery activities from the provincial administration, and the trials were managed by the lessee farmers. Three species combinations in ratios (by fingerling weight) of grass carp: silver carp: bighead carp: common carp: mrigal 1:2:1:1:3 (A), 1:3:1:1:2 (B) and 1:2:1:1:2 (C) were used as seed stock. The overall mean yield of stocked fish in 2002/03 and 2003/04 growth cycles in reservoirs in ThaiNguyen and YenBai provinces was 165 (±21) and 190 (39), and 287 (±22) and 325 (±24) kg ha⁻¹ respectively. The yield in reservoirs in both provinces, in both growth cycles and irrespective of the species combinations, increased in relation to stocking density. In reservoirs in ThaiNguyen Province, the species combination B gave the lowest yield (both growth cycles and overall), and differed significantly (P<0.05) from combinations A and C. The stocking efficiency (ratio of the yield of stocked fish in kg ha⁻¹ to the weight of the stocked fish in kg ha⁻¹) in reservoirs in ThaiNguyen Province ranged from 2.9 to 5.1 over the two growth cycles and that in YenBai from 2.8 to 3.9. There was no discernible trend between growth cycles and/or between species combinations. The major cost incurred was for fingerling procurement. In all instances, a net profit was accrued. The mean (±standard error (SE)) net profit ha⁻¹ (in 103VN dong; approximately 15 500 VND=1 US$) was 885 (±270) and 864 (±214), and 1322 (±176) and 1600 (±150) for the growth cycles 2002/03 and 2003/04 for reservoirs in ThaiNguyen and YenBai provinces respectively. Between the two growth cycles, the net profit increased in eight and three reservoirs from YenBai and ThaiNguyen, respectively, the maximum increase being recorded in Khuan Gio (165%) and Dong Man (39%) reservoirs.

Effect of cell characteristics on the compressive deformation behavior of a closed-cell aluminium

In this study, the mechanical properties of a closed-cell aluminium foam have been investigated by compressive tests. The deformation behaviors of the aluminium foams were studied using X-ray microtomography (XMT). Aluminium foam samples with various cell size distributions and cell
morphologies were intentionally selected to investigate the effect of the cell characteristics on the deformation behaviors. Results indicated that the deformation of the aluminium foams under compressive loading was localized in narrow continuous deformation bands having widths of order of a cell diameter. The cells in the deformation bands collapsed by a mixed deformation mechanism, which includes mainly bending, and also minor buckling and yielding as well. Different fractions of the three deformation modes led to variations in the peak stress and energy absorption for different foam samples with the same density. It was also found that the cell morphology affected the deformation mechanism significantly, whilst the cell size showed little influence. Those cells with defects such as corrugations, curvatures and non-uniformities in the wall thickness were the initiators of the deformation bands of the aluminium foam.

The origin of "Rare Earth" texture development in extruded Mg-based alloys and its effect on tensile ductility

The extrusion behaviour, texture and tensile ductility of five binary Mg-based alloys have been examined and compared to pure Mg. The five alloying additions examined were Al, Sn, Ca, La and Gd. When these alloys are compared at equivalent grain size, the La- and Gd-containing alloys show the best ductilities. This has been attributed to a weaker extrusion texture. These two alloying additions, La and Gd, were found to also produce a new texture peak with View the MathML source parallel to the extrusion direction. This “rare earth texture” component was found to be suppressed at high extrusion temperatures. It is proposed that the View the MathML source texture component arises from oriented nucleation at shear bands.

Dependency of recrystallization mechanism to the initial grain size

The effect of initial grain size on the recrystallization behavior of a type 304 austenitic stainless steel during and following hot deformation was investigated using hot torsion. The refinement of the initial grain size to 8 μm, compared with an initial grain size of 35 μm, had considerable effects on the dynamic recrystallization (DRX) and post-DRX phenomena. For both DRX and post-DRX, microstructural investigations using electron backscattered diffraction confirmed an interesting transition from conventional (discontinuous) to continuous DRX with a decrease in the initial grain size. Also, there were unexpected effects of initial grain size on DRX and post-DRX grain sizes.

Undernutrition during suckling in rats elevates plasma adiponectin and its receptor in skeletal muscle regardless of diet composition : a protective effect?

Objective:
Nutrition during critical periods in early life may increase the subsequent risk of obesity, hypertension and metabolic diseases in adulthood. Few studies have focused on the long-term consequences of poor nutrition during the suckling period on the susceptibility to developing obesity when exposed to a palatable cafeteria-style high-fat diet (CD) after weaning.

Design:
This study examined the impact of early undernutrition, followed by CD exposure, on blood pressure, hormones and genes important for insulin sensitivity and metabolism and skeletal muscle mRNA expression of adiponectin receptor 1 (AdipoR1), carnitine palmitoyl-transferase I (CPT-1), cytochrome c oxidase 4 (COX4) and peroxisome proliferator-activated receptor alpha (PPARalpha). Following normal gestation, Sprague–Dawley rat litters were adjusted to 18 (undernourished) or 12 (control) pups. Rats were weaned (day 21) onto either palatable CD or standard chow.

Results:
Early undernourished rats were significantly lighter than control by 17 days, persisting into adulthood only when animals were fed chow after weaning. Regardless of litter size, rats fed CD had doubled fat mass at 15 weeks of age, and significant elevations in plasma leptin, insulin and adiponectin. Importantly, undernutrition confined to the suckling period, elevated circulating adiponectin regardless of post-weaning diet. Blood pressure was reduced in early undernourished rats fed chow, and increased by CD. Early undernutrition was associated with long-term elevations in the expression of AdipoR1, CPT-1, COX4 and PPARalpha in skeletal muscle.

Conclusion:
This study demonstrates the important role of early nutrition on body weight and metabolism, suggesting early undernourishment enhances insulin sensitivity and fatty-acid oxidation. The long-term potential benefit of limiting nutrition in the early postnatal period warrants further investigation.

Investigating the factors of professional development programs that effect change in the classroom

This paper reports on the implementation of two professional development programs designed to support ICT based pedagogies in Victorian (Australia) schools. In both programs the teachers participated in an intensive program of professional development designed to assist them in embedding ICT into their classroom practice. There was a large diversity of circumstances experienced by the schools, not only in terms of ICT availability and use, and teacher experience, but also in issues of cultures of curriculum planning and integration, size, communication, and pedagogical presumptions. Both projects were successful in implementing change; however there were teachers in both projects who failed to take advantage of the PD. Some of the limitations with both studies include the high expectations of time comittment by the teachers – who are already fully committed with full teaching loads, and the high expectations of the change that will occur in the teaching and
learning as a result of the PD, wthout consideration of the time needed to learn and adopt new pedagogical practice. In some cases, teachers and the school did not appreciate the necessary commitment to take full advantage of the opportunity being provided. This was compounded by the lack of support and recognition by school management.

The effect of flicker from fluorescent lights on mate choice in captive birds

The visual systems of birds are hypothesized to have higher temporal resolution than those of humans, suggesting that they may be able to perceive the flicker emitted from conventional low-frequency fluorescent lights (LF; 100 Hz in Europe, 120 Hz in the U.S.A.). These lights are commonly used in the housing of captive birds and this may affect both their welfare and performance in experiments. We carried out mate choice experiments on European starlings, Sturnus vulgaris, under both low- and high-frequency fluorescent lights (HF; > 30 kHz, at which flicker is imperceptible). Indicators of male condition and size, together with the reflectance spectra and length of the males' throat feathers, were also recorded to ascertain which variables correlated with female preference. Females ranked males consistently under HF, but not LF, lighting, and individual females chose different males under the two lighting types. Under HF lighting, females chose to spend more time with males that had longer throat feathers. The flicker rate of the light clearly affected the choices made by the females, possibly because of nonspecific stress effects or decreased discrimination ability. Our results imply that careful interpretation of mate choice experiments is needed, especially with regard to the lighting types used, to elucidate the real cause behind any variation shown. (c) 2006 The Association for the Study of Animal Behaviour. Published by Elsevier Ltd. All rights reserved.

Effect of second-phase particles on shape memory in Fe-Mn-Si-based alloys

The shape memory behaviour of two Fe–Mn–Si-based alloys has been investigated. One alloy was a reference alloy, and the other alloy was
similar in composition except that it contained 0.55 wt% Ti. Following solution treatment and quenching, strip samples were subjected to three types
of treatments; isothermal holding, cold rolling followed by isothermal holding, and hot rolling followed by isothermal holding. These treatments
resulted in the formation of intermetallic precipitates in the Ti-containing alloy, while the reference alloy remained precipitate-free. In comparing
the shape memory of the reference and the particle-containing alloy after identical heat treatments, it was found that the formation of precipitates
had a beneficial effect on the shape memory in all cases. In general, the larger precipitates caused a larger increase in the shape memory. The effect
of particle size on shape memory has been analysed using the current data and published results for a range of precipitate types.

Martensite/particle interactions and the shape memory effect in an Fe–Mn–Si-based alloy

The effect of carbide precipitates with a size range of 30–300 nm on the austenite to martensite transformation has been studied. Such particles are known to enhance shape memory, and it was the aim of this work to clarify how the particles exert a favourable effect on shape memory. Differential scanning calorimetry revealed that the presence of particles increases the amount of thermally induced martensite. X-ray diffraction showed that the presence of particles increases the amount of stress-induced martensite also. Surface-relief produced on a pre-polished surface by bending deformation showed that the particle-containing samples exhibited a more complex and highly tilted surface-relief indicative of the formation of a larger volume fraction of martensite. The reversion characteristics of the particle-containing and solution-treated samples were similar: both showed co-reversion of multiple variants of martensite within the same volume of microstructure. However, a higher volume fraction of martensite reverted for the particle-containing sample on recovery annealing. The increased density of nucleation sites for martensite formation and a higher volume fraction of stress-induced martensite for a given strain are therefore considered to be the main contributions of relatively coarse carbide particles to the improvement of shape memory performance.

The trophic effect of dietary fibre is not associated with a change in total crypt number in the distal colon of rats

Soluble fibres, such as guar gum, promote and wheat bran or methylcellulose protect from chemically induced colon carcinogenesis, relative to the effect of a fibre-free diet in rats. Mechanisms are poorly understood. Whereas all fibres are trophic to the colonic epithelium, the heterogeneity of effects on carcinogenesis may reflect different effects on the total number of crypts and, therefore, the size of the stem cell population. This study aimed to assess this hypothesis. Sprague–Dawley rats were fed one of fibre-free diets with or without 10% wheat bran, methylcellulose or guar gum for 4 weeks. The distal colons were stained with methylene blue and quantified for the number and density of crypts using an image analysis system. Epithelial proliferative kinetics was measured stathmokinetically. Methodology for quantifying crypts was valid and reproducible. Rats fed a fibre-free diet had atrophic distal colon, as shown by a decrease in crypt column height and a lower mitotic index. Fibre supplementation prevented the atrophy and was associated with crypt mouth areas that were 30–60% larger than those in the fibre-free group (P < 0.001, ANOVA), with the methylcellulose group being the largest (1.16 µm2). The crypt density of the fibre-free group was 16–19% greater than those in fibre fed groups (P + 0.006), due to the smaller size of the crypts. However, there was no difference in the total number of crypts across the four dietary groups (P > 0.1). Distal colons in all of the dietary groups contained ~105 crypts. In conclusion, although variation in the amount or type of dietary fibre exerts heterogeneous effects on the growth of the colonic epithelium and on colon carcinogenesis, the total number of crypts in the distal colon remains constant. It is, therefore, unlikely that fibres influence carcinogenic events by altering the size of the stem cell population.

Effect of particles on the formation of deformation twins in a magnesium-based alloy

The deformation behaviour of the age hardenable alloy Mg–5%Zn after different precipitation treatments has been examined. It has been found that during compressive deformation, fine particles increase the number of twins that form, but reduce the size and total volume fraction of twins. Visco-plastic selfconsistent modelling has been used to show that the presence of precipitates hardens the twin and prismatic slip systems more than the basal slip system. It is proposed that because the {10 ¯12} twin requires basal slip to accommodate the twinning shear, this twin type will always be hardened equal to, or more than, the basal slip system in response to precipitation.

Surprising effect of nanoparticle inclusion on ion conductivity in a lithium doped organic ionic plastic crystal

Doping lithium bis(trifluoromethanesulfonyl)amide (Li[NTf₂]) into the N-ethyl,N′-methylpyrrolidinium bis(trifluoromethanesulfonyl)amide ([C₂mpyr][NTf₂]) plastic crystal material has previously indicated order of magnitude enhancements in ion transport and conductivity over pure [C₂mpyr][NTf₂]. Recently, conductivity enhancements in this ionic plastic crystal induced by SiO₂ nanoparticles have also been reported. In this work the inclusion of SiO₂ nanoparticles in Li ion doped [C₂mpyr][NTf₂] has been investigated over a wide temperature range by differential scanning calorimetry (DSC), impedance spectroscopy, positron annihilation lifetime spectroscopy (PALS), Raman spectroscopy, NMR spectroscopy and scanning electron microscopy (SEM). Solid state ¹H NMR indicates that the addition of the nanoparticles increases the mobility of the [C₂mpyr] cation and positron lifetime spectroscopy (PALS) measurements indicate an increase in mean defect size and defect concentration as a result of nanoparticle inclusion, especially with 10 wt% SiO₂. Thus, the substantial drop in ion conductivity observed for this doped nanocomposite material was surprising. This decrease is most likely due to the decrease in mobility of the [NTf₂] anion, possibly by its adsorption at the SiO₂/grain boundary interface and concomitant decrease in mobility of the Li ion.

Controls on body size during the Late Permian mass extinction event

This study examines the morphological responses of Late Permian brachiopods to environmental changes. Quantitative analysis of body size data from Permian–Triassic brachiopods has demonstrated significant, directional changes in body size before, during and after the Late Permian mass extinction event. Brachiopod size significantly reduced before and during the extinction interval, increased for a short time in more extinction-resistant taxa in the latter stages of extinction and then dramatically reduced again across the Permian ⁄ Triassic boundary. Relative abundances of trace elements and acritarchs demonstrate that the body size reductions which happened before, during and after extinction were driven by primary productivity collapse, whereas declining oxygen levels had less effect. An episode of size increase in two of the more extinction-resistant brachiopod species is unrelated to environmental change and possibly was the result of reduced interspecific competition for resources following the extinction of competitors. Based on the results of this study, predictions can be made for the possible responses of modern benthos to present-day environmental changes.

Effects of resistance exercise and fortified milk on skeletal muscle mass, muscle size, and functional performance in middle-aged and older men: an 18-mo randomized controlled trial

Limited data have suggested that the consumption of fluid milk after resistance training (RT) may promote skeletal muscle hypertrophy. The aim of this study was to assess whether a milk-based nutritional supplement could enhance the effects of RT on muscle mass, size, strength, and function in middle-aged and older men. This was an 18-mo factorial design (randomized control trial) in which 180 healthy men aged 50–79 yr were allocated to the following groups: 1) exercise + fortified milk, 2) exercise, 3) fortified milk, or 4) control. Exercise consisted of progressive RT with weight-bearing impact exercise. Men assigned to the fortified milk consumed 400 ml/day of low-fat milk, providing an additional 836 kJ, 1000 mg calcium, 800 IU vitamin D3, and 13.2 g protein per day. Total body lean mass (LM) and fat mass (FM) (dual-energy X-ray absorptiometry), midfemur muscle cross-sectional area (CSA) (quantitative computed tomography), muscle strength, and physical function were assessed. After 18 mo, there was no significant exercise by fortified milk interaction for total body LM, muscle CSA, or any functional measure. However, main effect analyses revealed that exercise significantly improved muscle strength (∼20–52%, P < 0.001), LM (0.6 kg, P < 0.05), FM (−1.1 kg, P < 0.001), muscle CSA (1.8%, P < 0.001), and gait speed (11%, P < 0.05) relative to no exercise. There were no effects of the fortified milk on muscle size, strength, or function. In conclusion, the daily consumption of low-fat fortified milk does not enhance the effects of RT on skeletal muscle size, strength, or function in healthy middle-aged and older men with adequate energy and nutrient intakes.