Functional surface chemistry of carbon-based nanostructures

The recently discovered abilities to synthesize single-walled carbon nanotubes and prepare single layer graphene have spurred interest in these sp2-bonded carbon nanostructures. In particular, studies of their potential use in electronic devices are many as silicon integrated circuits are encountering processing limitations, quantum effects, and thermal management issues due to rapid device scaling. Nanotube and graphene implementation in devices does come with significant hurdles itself. Among these issues are the ability to dope these materials and understanding what influences defects have on expected properties. Because these nanostructures are entirely all-surface, with every atom exposed to ambient, introduction of defects and doping by chemical means is expected to be an effective route for addressing these issues. Raman spectroscopy has been a proven characterization method for understanding vibrational and even electronic structure of graphene, nanotubes, and graphite, especially when combined with electrical measurements, due to a wealth of information contained in each spectrum. In Chapter 1, a discussion of the electronic structure of graphene is presented. This outlines the foundation for all sp2-bonded carbon electronic properties and is easily extended to carbon nanotubes. Motivation for why these materials are of interest is readily gained. Chapter 2 presents various synthesis/preparation methods for both nanotubes and graphene, discusses fabrication techniques for making devices, and describes characterization methods such as electrical measurements as well as static and time-resolved Raman spectroscopy. Chapter 3 outlines changes in the Raman spectra of individual metallic single-walled carbon nantoubes (SWNTs) upon sidewall covalent bond formation. It is observed that the initial degree of disorder has a strong influence on covalent sidewall functionalization which has implications on developing electronically selective covalent chemistries and assessing their selectivity in separating metallic and semiconducting SWNTs. Chapter 4 describes how optical phonon population extinction lifetime is affected by covalent functionalization and doping and includes discussions on static Raman linewidths. Increasing defect concentration is shown to decrease G-band phonon population lifetime and increase G-band linewidth. Doping only increases G-band linewidth, leaving non-equilibrium population decay rate unaffected. Phonon mediated electron scattering is especially strong in nanotubes making optical phonon decay of interest for device applications. Optical phonon decay also has implications on device thermal management. Chapter 5 treats doping of graphene showing ambient air can lead to inadvertent Fermi level shifts which exemplifies the sensitivity that sp2-bonded carbon nanostructures have to chemical doping through sidewall adsorption. Removal of this doping allows for an investigation of electron-phonon coupling dependence on temperature, also of interest for devices operating above room temperature. Finally, in Chapter 6, utilizing the information obtained in previous chapters, single carbon nanotube diodes are fabricated and characterized. Electrical performance shows these diodes are nearly ideal and photovoltaic response yields 1.4 nA and 205 mV of short circuit current and open circuit voltage from a single nanotube device. A summary and discussion of future directions in Chapter 7 concludes my work.

Design of passive methane oxidation biosystems considering their response to the presence of capillary barrier effect

La construction des biosystèmes d’oxydation passive du méthane (BOPM) est une option économique et durable pour réduire les émissions de méthane des sites d’enfouissement de déchets et des effets subséquents du réchauffement climatique. Les BOPM sont constitués de deux couches principales: la couche d'oxydation du méthane (MOL) et la couche de distribution du gaz (GDL). L'oxydation du méthane se produit dans la MOL par les réactions biochimiques des bactéries méthanotrophes, et la GDL est construite sous la MOL pour intercepter et distribuer les émissions fugitives de biogaz à la base de la MOL. Fondamentalement, l'efficacité d'un BOPM est définie en fonction de l'efficacité d'oxydation du méthane dans la MOL. Par conséquent, il est indispensable de fournir des conditions adéquates pour les activités bactériennes des méthanotrophes. En plus des paramètres environnementaux, l'intensité et la distribution du biogaz influencent l'efficacité des BOPM, et ils peuvent rendre le matériau de la MOL - avec une grande capacité d'accueillir les activités bactériennes - inutilisables en termes d'oxydation du méthane sur place. L'effet de barrière capillaire le long de l'interface entre la GDL et la MOL peut provoquer des émissions localisées de méthane, due à la restriction ou la distribution non uniforme de l’écoulement ascendant du biogaz à la base de la MOL. L'objectif principal de cette étude est d'incorporer le comportement hydraulique non saturé des BOPM dans la conception des BOPM, afin d’assurer la facilité et la distribution adéquates de l'écoulement du biogaz à la base de la MOL. Les fonctions de perméabilité à l'air des matériaux utilisés pour construire la MOL des BOPM expérimentaux au site d’enfouissement des déchets de St Nicéphore (Québec, Canada), ainsi que celles d'autres de la littérature technique, ont été étudiés pour évaluer le comportement d'écoulement non saturé du gaz dans les matériaux et pour identifier le seuil de migration sans restriction du gaz. Ce dernier seuil a été introduit en tant que un paramètre de conception avec lequel le critère de conception recommandé ici, c’est à dire la longueur de la migration sans restriction de gaz (LMSG), a été défini. La LMSG est considérée comme la longueur le long de l'interface entre la GDL et la MOL où le biogaz peut migrer à travers la MOL sans restriction. En réalisant des simulations numériques avec SEEP/W, les effets de la pente de l'interface, des paramètres définissant la courbe de rétention d'eau, de la fonction de la conductivité hydraulique du matériau de la MOL sur la valeur de la LMSG (représentant la facilité d'écoulement du biogaz à l'interface) et de la distribution de l'humidité (et par conséquent celle du biogaz) ont été évalués. Selon les résultats des simulations, la conductivité hydraulique saturée et la distribution des tailles de pores du matériau de la MOL sont les paramètres les plus importants sur la distribution de l'humidité le long de l'interface. Ce dernier paramètre influe également sur la valeur du degré de saturation et donc la facilité du biogaz à la base de la MOL. La densité sèche du matériau de MOL est un autre paramètre qui contrôle la facilité d'écoulement ascendant du biogaz. Les limitations principales de la présente étude sont associées au nombre de matériaux de MOL testés et à l'incapacité de SEEP/W de considérer l'évapotranspiration. Toutefois, compte tenu des hypothèses raisonnables dans les simulations et en utilisant les données de la littérature, on a essayé de réduire ces limitations. En utilisant les résultats des expériences et des simulations numériques, des étapes et des considérations de conception pour la sélection du matériau de MOL et de la pente d'interface ont été proposées. En effet,le comportement hydraulique non saturé des matériaux serait intégré dans les nécessités de conception pour un BOPM efficace, de sorte que la capacité maximale possible d'oxydation du méthane du matériau de la MOL soit exploitée.

Studies on the protective immune response to Plasmodium chabaudi in mice

Inbred strains of C5731 and NIH nice infected with the A/S strain of Plasmodium chaubaudi usually developed high parasitaemias but infections were rarely fatal in immunocompetent mice and in most mice the parasites could be eradicated within 53 days or less. The immune response of C57B1 and NTH mice to infection with the A/S strain of P. chabaudi was studied. The principle method used in this study for investigating the immune response of the mice was to examine the immunity conferred on syngeneic mice, either X-irradiated or non-irradiated, by transferring to them lymphoid cells or serum from immune or semi-immune donors. The lymphoid cell populations examined were unfractionated spleen cells, nylon wool column enriched subpopulations of thymus-derived lymphocytes (T cells) and the so-called bursa-derived lymphocytes (B cells), bone marrow cells and phagocytic cells. In the course of these experiments observations were made on the effect of X-irradiation on the subsequent growth and multiplication of the parasite. In addition, an in vitro assay for antibody-dependent cell mediated cytotoxicity was used to investigate the activity of splenic K cells during malaria infection. K cells are lymphoid cells which may include lymphocytes of an undefined category, but possess receptors for the Fc portion of antibody on their surface and have the ability to non-specifically lyse target cells coated in antibodies. a) The adoptive transfer of immunity to P.chabaudi with immune spleen cells. Spleen cells from mice which had previously been infected with P.chabaudi were able to confer some immunity on syngeneic mice which had been irradiated with 600 or 800 rads. The protection was detected as a shortened patent parasitaemia in immune cell recipients compared to controls. The early experiments indicated the value of using irradiated recipients rather than non-irradiated recipients. In irradiated mice, a) smaller numbers of immune cells were required to promote detectable immunity than in non-irradiated mice, b) there was an amplification of the difference in the duration of primary parasitaemias in recipients of immune cells and normal cells compared to non-irradiated mice and c) as the irradiated host is immunodepressed, the protective effect of donor cells can be examined with a reduced contribution by the hosts own immune system. An initial non-specific resistance to P.chabaudi infection was observed in irradiated mice, although the infection in most of these mice was subsequently more severe than in non-irradiated mice. The non-specific resistance could be reduced or abolished by injecting lymphoid cells into mice shortly after irradiation or by infecting irradiated mice more than 15 days after irradiation. Other workers suggest that following irradiation, the reticulo-endothelial system is stimulated at the time that the non-specific resistance to P.chabaudi was observed. b) the adoptive transfer of immunity in syngeneic mice with enriched subpopulations of splenic immune T cells, B. cells, bone marrow cells and phagocytes. Immunity to P.chabaudi could be adoptively transferred with enriched spleen subpopulations of immune T cells or immune B cells in mice which had been irradiated 600 or 300 rads. The protective effects of unfractionated immune cells was, however, usually better than that of either immune T or F cell subpopulations. In most experiments enriched immune T cell recipients were more likely to suffer relapsing patent parasitaemias than either enriched immune B cell recipients or unfractionated immune cell recipients. In one experiment a comparison was made of the course of P.chabaudi infection in mice which had been irradiated with either 600 rads or 300 rads and which received injections of different immune cells. A dose of 600 rads permits the immune system of mice to recover from the effects of irradiation, but a dose of 800 rads is lethal to mice unless lymphoid cells are injected after irradiation. It was found that in recipients of enriched immune T or B cells, which had been irradiated with 600 rads, the parasitaemia became subpatent before their equivalents irradiated with 800 rads, but that there was little difference in parasitaemias between recipients of unfractionated immune cells given 600 or 800 rads. Experiments in which enriched immune T cells and B cells were recombined and injected into syngeneic mice gave inconclusive results as to whether the immune subpopulations acted synergistically. Similar experiments in which immune subpopulations of lymphoid cells were recombined with normal subpopulations of lymphoid cells demonstrated that the latter cells did not enhance the protective effect of the former cells. Bone marrow cells from immune mice were able to confer some protection on syngeneic recipients, but were not as protective as enriched immune T cells or B cells. The results obtained in adoptive transfer experiments using phagocytic cells from the spleen of immune mice depended on the length of time spleen cells were incubated in petri-dishes at 37° C before harvesting the phagocytes. Using C57B1 mice, phagocytes harvested after 15 hours incubation were as protective as unfractionated immune cells in a cell transfer experiment, but phagocytes harvested after 16 hours incubation were not protective. Examination of NIH phagocytic cells after 2.5 hours incubation at 37°C, which were as protective as unfractionated immune spleen cells in a cell transfer experiment, demonstrated that the petri-dish adherent cells may have contained B lymphocytes. c) The passive transfer of immunity with serum from P.chabaudi infected mice. The passive transfer of serum from C57B1 mice which had been previously infected with P.chabaudi to normal or irradiated syngeneic mice demonstrated that the serum recipients were initially protected from infection. Irradiated mice, however, were delayed longer in the onset of parasitaemia compared to non-irradiated mice. Using NIH mice, sera were collected from unfractionated immune spleen cell recipients, enriched immune T cell recipients and normal spleen recipients on the 11th day of a P.chabaudi infection, just after peak parasitaemia, and also on the 14th day of infection. On day 14, all immune cells recipients and most of the enriched immune T cell recipients had become subpatent but all normal cell recipients still had patent infections. Sera collected from the different spleen cell recipients on the 11th day of infection and passively transferred to irradiated mice demonstrated little protection. Sera collected on the 14th day of infect ion, however, reflected the immune status of the donors in their protective properties in mice infected with P.chabaudi. The serum from unfractionated immune cell recipients was the most protective of the 3 sera when compared to normal NIH serum and the serum from enriched immune T cell recipients was slightly protective, but the serum from normal cell recipients produced an enhanced infection in mice infected with P.chabaudi. d) Antibody-dependent cell-mediated cytotoxicity of spleen cells in P.chabaudi infected mice. In a preliminary investigation of K cell activity in the spleens of P.chabaudi infected mice, it was found that there was an increased activity of K cells collected at around peak parasitaemia compared to the activity of K cells in non-infected mice, and that this increased activity could also be found in mice which had recently become subpatent. As the target cell for antibody-dependent cell-mediated cytotoxicity employed was the thick red blood cell, it is not known whether the K cell is involved in the killing of P.chabaudi parasites. These results suggest that both T cells and B cells and antibody may be important in the immune response to P.chabaudi in mice. Primed T cells may act as helper cells in the production of malarial antibodies, but, as enriched primed T cells could confer protection on immunodepressed mice, it is possible that a cell-mediated mechanism of immunity may also exist.

RESPONSE OF LOCALLY ADAPTED PEARL MILLET POPULATIONS TO S1 PROGENY RECURRENT SELECTION FOR GRAIN YIELD AND RESISTANCE TO RUST

In the semi-arid zones of Uganda, pearl millet ( Pennisetum glaucum (L.) R. Br.) is mainly grown for food and income; but rust (Puccinia substriata var indica (L.) R. Br.) is the main foliar constraint lowering yield. The objective of the study was to genetically improve grain yield and rust resistance of two locally adapted populations (Lam and Omoda), through two cycles of modified phenotypic S1 progeny recurrent selection. Treatments included three cycles of two locally adapted pearl millet populations, evaluated at three locations. Significant net genetic gain for grain yield (72 and 36%) were achieved in Lam and Omoda populations, respectively. This led to grain yield of 1,047 from 611 kg ha-1 in Lam population and 943 from 693 kg ha-1 in Omoda population. Significant improvement in rust resistance was achieved in the two populations, with a net genetic gain of -55 and -71% in Lam and Omoda populations, respectively. Rust severity reduced from 30 to 14% in Lam population and from 57 to 17% in Omoda population. Net positive genetic gains of 68 and 8% were also achieved for 1000-grain weight in Lam and Omoda, respectively. Traits with a net negative genetic gain in both populations were days to 50% flowering, days to 50% anthesis, days to 50% physiological maturity, flower-anthesis interval, plant height and leaf area.

Shaping surface acoustic waves for cardiac tissue engineering

The heart is a non-regenerating organ that gradually suffers a loss of cardiac cells and functionality. Given the scarcity of organ donors and complications in existing medical implantation solutions, it is desired to engineer a three-dimensional architecture to successfully control the cardiac cells in vitro and yield true myocardial structures similar to native heart. This thesis investigates the synthesis of a biocompatible gelatin methacrylate hydrogel to promote growth of cardiac cells using biotechnology methodology: surface acoustic waves, to create cell sheets. Firstly, the synthesis of a photo-crosslinkable gelatin methacrylate (GelMA) hydrogel was investigated with different degree of methacrylation concentration. The porous matrix of the hydrogel should be biocompatible, allow cell-cell interaction and promote cell adhesion for growth through the porous network of matrix. The rheological properties, such as polymer concentration, ultraviolet exposure time, viscosity, elasticity and swelling characteristics of the hydrogel were investigated. In tissue engineering hydrogels have been used for embedding cells to mimic native microenvironments while controlling the mechanical properties. Gelatin methacrylate hydrogels have the advantage of allowing such control of mechanical properties in addition to easy compatibility with Lab-on-a-chip methodologies. Secondly in this thesis, standing surface acoustic waves were used to control the degree of movement of cells in the hydrogel and produce three-dimensional engineered scaffolds to investigate in-vitro studies of cardiac muscle electrophysiology and cardiac tissue engineering therapies for myocardial infarction. The acoustic waves were characterized on a piezoelectric substrate, lithium niobate that was micro-fabricated with slanted-finger interdigitated transducers for to generate waves at multiple wavelengths. This characterization successfully created three-dimensional micro-patterning of cells in the constructs through means of one- and two-dimensional non-invasive forces. The micro-patterning was controlled by tuning different input frequencies that allowed manipulation of the cells spatially without any pre- treatment of cells, hydrogel or substrate. This resulted in a synchronous heartbeat being produced in the hydrogel construct. To complement these mechanical forces, work in dielectrophoresis was conducted centred on a method to pattern micro-particles. Although manipulation of particles were shown, difficulties were encountered concerning the close proximity of particles and hydrogel to the microfabricated electrode arrays, dependence on conductivity of hydrogel and difficult manoeuvrability of scaffold from the surface of electrodes precluded measurements on cardiac cells. In addition, COMSOL Multiphysics software was used to investigate the mechanical and electrical forces theoretically acting on the cells. Thirdly, in this thesis the cardiac electrophysiology was investigated using immunostaining techniques to visualize the growth of sarcomeres and gap junctions that promote cell-cell interaction and excitation-contraction of heart muscles. The physiological response of beating of co-cultured cardiomyocytes and cardiac fibroblasts was observed in a synchronous and simultaneous manner closely mimicking the native cardiac impulses. Further investigations were carried out by mechanically stimulating the cells in the three-dimensional hydrogel using standing surface acoustic waves and comparing with traditional two-dimensional flat surface coated with fibronectin. The electrophysiological responses of the cells under the effect of the mechanical stimulations yielded a higher magnitude of contractility, action potential and calcium transient.

Structural Basis for Clonal Diversity of the Public T Cell Response to Dominant Epitopes from Cytomegalovirus and Influenza

A diverse T cell receptor (TCR) repertoire is a prerequisite for effective viral clearance. However, knowledge of human TCR repertoire to defined viral antigens is limited. Recent advances in high-throughput sequencing (HTS) and single-cell sorting have revolutionized the study of human TCR repertoires to different types of viruses. In collaboration with the laboratory of Dr. Nan-ping Weng (National Institute on Aging, NIH), we applied unique molecular identifier (UMI)-labelled HTS, single-cell paired TCR analysis, surface plasmon resonance, and X-ray crystallography to exhaustively interrogate CD8+ TCR repertoires specific for cytomegalovirus (CMV) and influenza A (Flu) in HLA-A2+ humans. Our two CMV-specific TCR-pMHC structures and two Flu-specific TCR-pMHC structures provide a plausible explanation for the much higher diversity of CMV-specific than Flu-specific TCR repertoires in humans. Our comprehensive biochemical and structural portrait of two different anti-viral T cell responses may contribute to the future development of predictors of immunity or disease at the individual level.

Cell surface Glut1 levels distinguish human CD4 and CD8 T lymphocyte subsets with distinct effector functions

International audience

Benthic response to upwelling events off the SE Brazilian coast

The main aim of the present study was to evaluate and compare temporal responses of the benthos in 2 continental shelf areas (Cabo Frio and Ubatuba) off the SE Brazilian coast. In Cabo Frio (23 degrees S, 42 degrees W), the western boundary coastal upwelling of the South Atlantic Central Water (SACW) enhances primary productivity, potentially increasing food supply to the benthic communities via sinking of particulate organic carbon (POC). In contrast, POC fluxes in Ubatuba (23 degrees S, 45 degrees W) are expected to be comparatively lower because SACW remains subsurface. We analyzed the temporal and spatial input of phytodetritus (concentration of chlorophyll a in sediments) and the benthic microbial biomass (estimated by ATP-based carbon content in sediments). Median surface chlorophyll concentration was computed for all daily available SeaWiFS images (from 2001 and 2002) to follow chlorophyll a inputs. All parameters used to investigate benthic responses in the study areas showed consistently higher values in Cabo Frio than in Ubatuba. The results showed that benthic response to upwelling may last months, fueling the microbial communities in the Cabo Frio region.

Bacterial communities of the specialty crop phyllosphere: response to biological soil amendment use, rainfall, and insect visitation

Microorganisms in the plant rhizosphere, the zone under the influence of roots, and phyllosphere, the aboveground plant habitat, exert a strong influence on plant growth, health, and protection. Tomatoes and cucumbers are important players in produce safety, and the microbial life on their surfaces may contribute to their fitness as hosts for foodborne pathogens such as Salmonella enterica and Listeria monocytogenes. External factors such as agricultural inputs and environmental conditions likely also play a major role. However, the relative contributions of the various factors at play concerning the plant surface microbiome remain obscure, although this knowledge could be applied to crop protection from plant and human pathogens. Recent advances in genomic technology have made investigations into the diversity and structure of microbial communities possible in many systems and at multiple scales. Using Illumina sequencing to profile particular regions of the 16S rRNA gene, this study investigates the influences of climate and crop management practices on the field-grown tomato and cucumber microbiome. The first research chapter (Chapter 3) involved application of 4 different soil amendments to a tomato field and profiling of harvest-time phyllosphere and rhizosphere microbial communities. Factors such as water activity, soil texture, and field location influenced microbial community structure more than soil amendment use, indicating that field conditions may exert more influence on the tomato microbiome than certain agricultural inputs. In Chapter 4, the impact of rain on tomato and cucumber-associated microbial community structures was evaluated. Shifts in bacterial community composition and structure were recorded immediately following rain events, an effect which was partially reversed after 4 days and was strongest on cucumber fruit surfaces. Chapter 5 focused on the contribution of insect visitors to the tomato microbiota, finding that insects introduced diverse bacterial taxa to the blossom and green tomato fruit microbiome. This study advances our understanding of the factors that influence the microbiomes of tomato and cucumber. Farms are complex environments, and untangling the interactions between farming practices, the environment, and microbial diversity will help us develop a comprehensive understanding of how microbial life, including foodborne pathogens, may be influenced by agricultural conditions.

Microcantilever arrays functionalised with spiropyran photoactive moieties as systems to measure photo-induced surface stress changes

[EN] Herein we investigate the feasibility of detecting photo-induced surface stress changes using the deflection response of cantilevers. For this purpose, silicon microcantilevers have been functionalised with spiropyran photochromic molecules, using both a monolayer and a polymeric brushes approach. Uponultraviolet light irradiation, the spiropyran unit is converted to the merocyanine form due to the photo-induced cleavage of the Cspiro-O bond. The two forms of the molecule have dramatically different charge,polarity and molecular conformations. This makes spiropyrans an ideal system to study the correlation between photo-induced molecular changes and corresponding changes in surface stress. Our investigations include monitoring the changes in static cantilever deflection, and consequently, surface stress of the spiropyran functionalised cantilevers on exposure to ultraviolet light. Cantilever deflection data reveals that ultraviolet induced conformational changes in the spiropyran moiety cause a change incompressive surface stress and this varies with the type of functionalisation method implemented. The change in surface stress response from the spiropyran polymer brushes functionalised cantilevers gives an average surface stress change of 98 Nm−1(n = 24) while the spiropyran monolayer coated cantilevers have an average surface stress change of about 446 Nm−1(n = 8) upon irradiation with UV light.

The role of the Indian Ocean sector and sea surface salinity for prediction of the coupled Indo-Pacific system

The purpose of this dissertation is to evaluate the potential downstream influence of the Indian Ocean (IO) on El Niño/Southern Oscillation (ENSO) forecasts through the oceanic pathway of the Indonesian Throughflow (ITF), atmospheric teleconnections between the IO and Pacific, and assimilation of IO observations. Also the impact of sea surface salinity (SSS) in the Indo-Pacific region is assessed to try to address known problems with operational coupled model precipitation forecasts. The ITF normally drains warm fresh water from the Pacific reducing the mixed layer depths (MLD). A shallower MLD amplifies large-scale oceanic Kelvin/Rossby waves thus giving ~10% larger response and more realistic ENSO sea surface temperature (SST) variability compared to observed when the ITF is open. In order to isolate the impact of the IO sector atmospheric teleconnections to ENSO, experiments are contrasted that selectively couple/decouple the interannual forcing in the IO. The interannual variability of IO SST forcing is responsible for 3 month lagged widespread downwelling in the Pacific, assisted by off-equatorial curl, leading to warmer NINO3 SST anomaly and improved ENSO validation (significant from 3-9 months). Isolating the impact of observations in the IO sector using regional assimilation identifies large-scale warming in the IO that acts to intensify the easterlies of the Walker circulation and increases pervasive upwelling across the Pacific, cooling the eastern Pacific, and improving ENSO validation (r ~ 0.05, RMS~0.08C). Lastly, the positive impact of more accurate fresh water forcing is demonstrated to address inadequate precipitation forecasts in operational coupled models. Aquarius SSS assimilation improves the mixed layer density and enhances mixing, setting off upwelling that eventually cools the eastern Pacific after 6 months, counteracting the pervasive warming of most coupled models and significantly improving ENSO validation from 5-11 months. In summary, the ITF oceanic pathway, the atmospheric teleconnection, the impact of observations in the IO, and improved Indo-Pacific SSS are all responsible for ENSO forecast improvements, and so each aspect of this study contributes to a better overall understanding of ENSO. Therefore, the upstream influence of the IO should be thought of as integral to the functioning of ENSO phenomenon.

Development of hydroxyapatite-based nanomaterials to enhance biological response of osteoblast cells for clinical application

Purpose: To develop a novel chitosan/gelatin-hydroxyapatite (CGHaP) microspheres for evaluating the biological response of pre-osteoblast cells. Methods: The microsphere was prepared by water-in-oil emulsion method. Cell proliferation was studied using AlamarBlue colorimetric assay and DAPI staining while alkaline phosphatase assay was carried out by colorimetric assay method. Chitosan microspheres as well as chitosan-hydroxyapatite microspheres was prepared and tested for biological response from MC3T3-E1 cell line. Results: The results showed that CGHaP promotes MC3T3-E1 cell proliferation and spread on the surface of microspheres. The cells were clustered with more actin filaments and well-linked with neighbouring cells or adjacent cells when cultured in CGHaP microspheres whereas fewer cells were spread on chitosan (CH) microspheres. CGHaP microspheres significantly (p < 0.05) promoted cell attachment, proliferation and extracellular matrix mineralization. CGHaP microspheres presented significantly (p < 0.02) higher calcium deposition (0.5 ng) than CH microspheres (0.28 ng). Specifically, CGHaP microspheres exhibited high ALP activity (8 units; 2-fold) compared to CH with 3 units, after 7 days of incubation. The results suggest that CGHaP possesses a great ability to facilitate bone ingrowth formation and possibility of good osteointegration in vivo. Conclusion: The nanomaterial enhances the proliferation of pre-osteoblast cells in tissue engineering microspheres. The outcome of this study may have a major impact on the development of novel nanomaterials for bone tissue engineering.

Hydrohalite in cold sea ice: Laboratory observations of single crystals, surface accumulations, and migration rates under a temperature gradient, with application to “Snowball Earth"

When NaCl precipitates out of a saturated solution, it forms anhydrous crystals of halite at temperatures above +0.11?C, but at temperatures below this threshold it instead precipitates as the dihydrate ‘‘hydrohalite,’’ NaCl * 2H2O. When sea ice is cooled, hydrohalite begins to precipitate within brine inclusions at about -23C. In this work, hydrohalite crystals are examined in laboratory experiments: their formation, their shape, and their response to warming and desiccation. Sublimation of a sea ice surface at low temperature leaves a lag deposit of hydrohalite, which has the character of a fine powder. The precipitation of hydrohalite in brine inclusions raises the albedo of sea ice, and the subsequent formation of a surface accumulation further raises the albedo. Although these processes have limited climatic importance on the modern Earth, they would have been important in determining the surface types present in regions of net sublimation on the tropical ocean in the cold phase of a Snowball Earth event. However, brine inclusions in sea ice migrate downward to warmer ice, so whether salt can accumulate on the surface depends on the relative rates of sublimation and migration. The migration rates are measured in a laboratory experiment at temperatures from -2C to -32C; the migration appears to be too slow to prevent formation of a salt crust on Snowball Earth.

Étude de la dynamique du ferrofluide appliquée sur une surface générée par plusieurs actionneurs

Le sujet de cette thèse est la caractérisation dynamique d’une surface générée par plusieurs actionneurs d’un miroir ferrofluidique intégré dans un montage d’optique adaptative. Elle conclut un projet de doctorat au sein du groupe Borra s’étant échelonné sur 4 années. Un bref portrait général de l’optique adaptative est d’abord présenté, suivi d’une section sur la théorie du contrôle. Les types de contrôleurs y sont abordés, soit PID et surcharge. L’effet de la viscosité sur la réponse dynamique du système, ainsi que les analyseurs de front d’onde utilisés sont ensuite expliqués. La section résultats est subdivisée en plusieurs sous-sections ordonnées de façon chronologique. Dans un premier temps, il est question des résultats obtenus dans le cadre d’une caractérisation d’un nouveau miroir de 91 actionneurs fabriqué au sein du groupe. Il est ensuite question des résultats obtenus avec diverses techniques telles le PSD et l’imagerie déclenchée. Il y aura toute une section sur les résultats en vitesse, en fonction de la viscosité du liquide, suivie d’une section sur les simulations réalisées avec Simulink afin de bien cibler les limites du système. Les résultats portant sur la technique de surcharge des actionneurs seront ensuite présentés avec des projections futures. La dernière partie de cette thèse portera sur une innovation apportée par un autre membre du groupe. Nous parlerons de la déposition d’une membrane élastomère réfléchissante et de ses effets sur la dynamique du système.