967 resultados para quality use of medicines
Resumo:
Experiments were conducted in cement cisterns to find out the effect of adding different dosages of activated sludge on fish growth and plankton production. Three dosages of sludge,viz., 62·5 gm., 125 gm. and 250 gm. per 240 litres of water were used. Fingerlings ofCyprinus carpio, Cirrhina mrigala andCatla catla responded positively,C. mrigala showing maximum growth. The results indicate that the sludge has a direct influence on increasing growth of fish and production of plankton due to the release of nutrients into the water. The increase in plankton content stops after about 30 days. When greater quantities of sludge were added in the cisterns, fish mortality took place.
Resumo:
This poster describes a pilot case study, which aim is to study how future chemistry teachers use knowledge dimensions and high-order cognitive skills (HOCS) in their pre-laboratory concept maps to support chemistry laboratory work. The research data consisted of 168 pre-laboratory concept maps that 29 students constructed as a part of their chemistry laboratory studies. Concept maps were analyzed by using a theory based content analysis through Anderson & Krathwohls' learning taxonomy (2001). This study implicates that novice concept mapper students use all knowledge dimensions and applying, analyzing and evaluating HOCS to support the pre-laboratory work.
Resumo:
In this paper the classical problem of water wave scattering by two partially immersed plane vertical barriers submerged in deep water up to the same depth is investigated. This problem has an exact but complicated solution and an approximate solution in the literature of linearised theory of water waves. Using the Havelock expansion for the water wave potential, the problem is reduced here to solving Abel integral equations having exact solutions. Utilising these solutions,two sets of expressions for the reflection and transmission coefficients are obtained in closed forms in terms of computable integrals in contrast to the results given in the literature which,involved six complicated integrals in terms of elliptic functions. The two different expressions for each coefficient produce almost the same numerical results although it has not been possible to prove their equivalence analytically. The reflection coefficient is depicted against the wave number in a number of figures which almost coincide with the figures available in the literature wherein the problem was solved approximately by employing complementary approximations. (C) 2009 Elsevier B.V. All rights reserved.
Resumo:
By observing mergers of compact objects, future gravity wave experiments would measure the luminosity distance to a large number of sources to a high precision but not their redshifts. Given the directional sensitivity of an experiment, a fraction of such sources (gold plated) can be identified optically as single objects in the direction of the source. We show that if an approximate distance-redshift relation is known then it is possible to statistically resolve those sources that have multiple galaxies in the beam. We study the feasibility of using gold plated sources to iteratively resolve the unresolved sources, obtain the self-calibrated best possible distance-redshift relation and provide an analytical expression for the accuracy achievable. We derive the lower limit on the total number of sources that is needed to achieve this accuracy through self-calibration. We show that this limit depends exponentially on the beam width and give estimates for various experimental parameters representative of future gravitational wave experiments DECIGO and BBO.
Resumo:
A polymer containing electron-rich aromatic donors (1,5-dialkoxynaphthalene (DAN)) was coerced into a folded state by an external folding agent that contained an electron-deficient aromatic acceptor (pyromellitic diimide (PM)) unit. The donor-containing polymer was designed to carry a tertiary amine moiety in the linking segment, which served as an H-bonding site for reinforcing the interaction with the acceptor containing folding agent that also bore a carboxylic acid group. The H-bonding interaction of the carboxylic acid and the tertiary amine brings the PDI unit between two adjacent DAN units along the polymer backbone to induce charge-transfer (C-T) interactions, and this in turn causes the polymer chain to form a pleated structure. Evidence for the formation of such a pleated structure was obtained from NMR titration studies and also by monitoring the C-T band in their UV-visible spectra. By varying the length of the segment that links the PDI acceptor to the carboxylic acid group, we showed that the most effective folding agent was the one that had a single carbon spacer, as evident from the highest value of the association constant. Control experiments with propionic acid clearly demonstrated the importance of the additional C-T interactions for venerating the folded structures. Further, solution viscosity measurements in the presence of varying amounts of the folding agent revealed a gradual stiffening of the chain in the case of the PDI carrying carboxylic acid, whereas no such affect was seen in the case of simple propionic acid. These observations were supported by D FT calculations of the interactions of a dimeric model of the polymer with the various folding agents; here too the stability of the complex was seen to be highest in the case of the single carbon spacer.
Resumo:
One of the central issues in making efficient use of IT in the design, construction and maintenance of buildings is the sharing of the digital building data across disciplines and lifecycle stages. One technology which enables data sharing is CAD layering, which to be of real use requires the definition of standards. This paper focuses on the background, objectives and effectiveness of the International standard ISO 13567, Organisation and naming of layers for CAD. In particular the efficiency and effectiveness of the standardisation and standard implementation process are in focus, rather than the technical details. The study was conducted as a qualitative study with a number of experts who responded to a semi-structured mail questionnaire, supplemented by personal interviews. The main results were that CAD layer standards based on the ISO standard have been implemented, particularly in northern European countries, but are not very widely used. A major problem which was identified was the lack of resources for marketing and implementing the standard as national variations, once it had been formally accepted.
Resumo:
Triggered by the very quick proliferation of Internet connectivity, electronic document management (EDM) systems are now rapidly being adopted for managing the documentation that is produced and exchanged in construction projects. Nevertheless there are still substantial barriers to the efficient use of such systems, mainly of a psychological nature and related to insufficient training. This paper presents the results of empirical studies carried out during 2002 concerning the current usage of EDM systems in the Finnish construction industry. The studies employed three different methods in order to provide a multifaceted view of the problem area, both on the industry and individual project level. In order to provide an accurate measurement of overall usage volume in the industry as a whole telephone interviews with key personnel from 100 randomly chosen construction projects were conducted. The interviews showed that while around 1/3 of big projects already have adopted the use of EDM, very few small projects have adopted this technology. The barriers to introduction were investigated through interviews with representatives for half a dozen of providers of systems and ASP-services. These interviews shed a lot of light on the dynamics of the market for this type of services and illustrated the diversity of business strategies adopted by vendors. In the final study log files from a project which had used an EDM system were analysed in order to determine usage patterns. The results illustrated that use is yet incomplete in coverage and that only a part of the individuals involved in the project used the system efficiently, either as information producers or consumers. The study also provided feedback on the usefulness of the log files.
Resumo:
Estimates of natural frequencies corresponding to axisymmetric modes of flexural vibration of polar orthotropic annular plates have been obtained for various combinations of clamped, simply supported and free edge conditions. A coordinate transformation in the radial direction has been used to obtain effective solutions by the classical Rayleigh-Ritz method. The analysis with this transformation has been found to be advantageous in computations, particularly for large hole sizes, over direct analysis. Numerical results have been obtained for various values of hole sizes and rigidity ratio. The eigenvalue parameter has been found to vary more or less linearly with the rigidity ratio. A comparison with the results for isotropic plates has brought out some interesting features.
Resumo:
Control is central to management and there is already a considerable body of research on control. However, the emergence and growth of multinational corporations (MNCs) has renewed the interest in control, as MNCs are complex (often large) organizations that face circumstances beyond those of national business organizations. The geographical dispersion of MNC activities means that the headquarters controls subsidiaries that differ with regard to power and that are embedded in different cultural, political, legal and educational systems. Foreign subsidiary control also takes place across language boundaries and physical (i.e. geographical) distances. In face of these challenges, how are foreign subsidiaries controlled? The thesis explores different types of control mechanisms and attempts to explain the degree to which they are used to control foreign subsidiaries. It contributes to existing knowledge on control by exploring how five different control mechanisms are related to each other. Previous research has tended to focus only on one or two control mechanisms and seldom has their effect on each other been explored. The thesis also contributes by including two central aspects of the MNC that have been neglected in much of the research on foreign subsidiary control: language competence of subsidiary staff and physical distance between the headquarters and its subsidiaries. The findings indicate that specific control mechanisms should not be studied in isolation as there are intricate relationships among the different control mechanisms. Language competence of the subsidiary staff can furthermore affect the type and degree of control that the headquarters can exercise over a subsidiary. The findings also indicate that changes in the physical distance between subsidiaries and its headquarters (i.e. a relocation of the headquarters as part of a restructuring process) can have great consequences for the headquarters-subsidiary relationship.
Resumo:
Service researchers have repeatedly claimed that firms should acquire customer information in order to develop services that fit customer needs. Despite this, studies that would concentrate on the actual use of customer information in service development are lacking. The present study fulfils this research gap by investigating information use during a service development process. It demonstrates that use is not a straightforward task that automatically follows the acquisition of customer information. In fact, out of the six identified types of use, four represent non usage of customer information. Hence, the study demonstrates that the acquisition of customer information does not guarantee that the information will actually be used in development. The current study used an ethnographic approach. Consequently, the study was conducted in the field in real time over an extensive period of 13 months. Participant observation allowed direct access to the investigated phenomenon, i.e. the different types of use by the observed development project members were captured while they emerged. In addition, interviews, informal discussions and internal documents were used to gather data. A development process of a bank’s website constituted the empirical context of the investigation. This ethnography brings novel insights to both academia and practice. It critically questions the traditional focus on the firm’s acquisition of customer information and suggests that this focus ought to be expanded to the actual use of customer information. What is the point in acquiring costly customer information if it is not used in the development? Based on the findings of this study, a holistic view on customer information, “information in use” is generated. This view extends the traditional view of customer information in three ways: the source, timing and form of data collection. First, the study showed that the customer information can come explicitly from the customer, from speculation among the developers or it can already exist implicitly. Prior research has mainly focused on the customer as the information provider and the explicit source to turn to for information. Second, the study identified that the used and non-used customer information was acquired both previously, and currently within the time frame of the focal development process, as well as potentially in the future. Prior research has primarily focused on the currently acquired customer information, i.e. within the timeframe of the development process. Third, the used and non-used customer information was both formally and informally acquired. In prior research a large number of sophisticated formal methods have been suggested for the acquisition of customer information to be used in development. By focusing on “information in use”, new knowledge on types of customer information that are actually used was generated. For example, the findings show that the formal customer information acquired during the development process is used less than customer information already existent within the firm. With this knowledge at hand, better methods to capture this more usable customer information can be developed. Moreover, the thesis suggests that by focusing stronger on use of customer information, service development processes can be restructured in order to facilitate the information that is actually used.
Resumo:
Processor architects have a challenging task of evaluating a large design space consisting of several interacting parameters and optimizations. In order to assist architects in making crucial design decisions, we build linear regression models that relate Processor performance to micro-architecture parameters, using simulation based experiments. We obtain good approximate models using an iterative process in which Akaike's information criteria is used to extract a good linear model from a small set of simulations, and limited further simulation is guided by the model using D-optimal experimental designs. The iterative process is repeated until desired error bounds are achieved. We used this procedure to establish the relationship of the CPI performance response to 26 key micro-architectural parameters using a detailed cycle-by-cycle superscalar processor simulator The resulting models provide a significance ordering on all micro-architectural parameters and their interactions, and explain the performance variations of micro-architectural techniques.
Resumo:
Orbital energies and electronic transition energies of BH3·H2S and BH3·CO obtained from ultraviolet (HeI) photoelectron spectroscopy and electron energy loss spectroscopy are discussed in the light of quantum mechanical calculations. BH3·H2O has been characterized, for the first time, by means of the HeI spectrum and the ionization energies assigned to the various orbitals based on calculations.